Used Fruit Press for sale (12,873)

Condition: used, Technical details: pressure: 160 t throat: 760 mm slide stroke: 32...140 mm distance between table / ram: 400 mm ram adjustment: 100 mm no. of strokes: 50 Hub/min table:: 760x1000x95 Lasdpfxju Nfhqj Akwoh passage opening in table: 400x350 mm clamping surface ram: 630x850 mm clamping plate: 760x1010x92 mm total power requirement: 15 kW weight of the machine ca.: 6,2 t dimension machine xH: 2,9x1,2x3,4 m dimensions electric cabinet LxWxH: 0,8x0,45x2,1 m - via two hand control - copy of documents digital available Machine can be demonstrated under power. *

Condition: used, Year of construction: 1964, Technical details: pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm ram adjustment: 60 mm distance table/ram: 376 mm Lasdeu Nfibepfx Akweh Table dimensions: B.950xT:720 mm passage opening in table: 400x130 mm height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m This press is a high-performance press for mass production /series production. - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Machine is not functional and is on sale as is! *

Condition: used, Technical details: pressure: 20 t Ljdpfx Akju Nflijweah slide stroke: 6 - 60 mm throat: 176 mm ram adjustment: 55 mm no. of strokes: 155 Hub/min distance table/ram: 270 mm passage width: 470 mm Table dimensions: 300 x 450 mm passage opening in table: 90 mm surface area of ram: 130 x 248 mm inclination: 28 ° mortise hole in ram: 25 x 65 mm table height over floor: 775 mm air pressure - required: 5,5 - 6 bar total power requirement: 3,5 kW weight of the machine ca.: 1,0 t dimension machine approx.LxWxH: 1,3 x 1,1 x 1,95 m High performance press Central lubrication with light barrier (monitored) Linuflex stroke counter (counter) additional steel plate 315 x 400 x 50mm with center hole Ø 63mm *

Condition: used, Year of construction: 1997, Technical details: pressure: 160 t distance between columns: 1000 mm stroke: 250 mm dayligth: 600 mm distance table/ram: 600 mm table height over floor: 550 mm table surface area: 810 x 860 mm clamping surface ram: T x B: 720 x 580 mit T-Nuten mm Ljdpou Nfmmsfx Akweah total power requirement: 15 kW weight of the machine ca.: ca. 16,0 t The machine isn't installed yet. The pictures are from the origin location of the former owner. further details: - sideway passage W: 520 x H: 620mm - passage front side W:660mm x H: 600mm equipment: - walkable platform arround the machine= height over floor approx. 2400mm, platform approx. 2700 x 2600 x 1050mm - hydraulic pack - oil cooler i.D. *

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm Lsdou Nfmyspfx Akwoah voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: used, Technical details: pressure: manuell t distance between columns: - mm stroke: ca. 20 mm machine weight approx.: 9,5 kg dimensions of machine: L: 580 x B:280 x H:80 mm pneumatic cable terminal press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 20mm - tool holder: width=40mm ; length=90mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws see the picture i.D. Ledpfx Aksu Nftgjwjah *

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN Laedpfju Nfttjx Akweh cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: new, Working width 3000 mm Working height 2000 mm Number of cylinders 5 St. S&S Frame Press, Type RP 3000 ----- Working width: 3000 mm Working height: 2000 mm Item 1 S&S FRAME PRESS Type RP 3000 Item 2 Centre pressure beam with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2000 mm high Item 3 Shut-off valve on the 1st vertical cylinder Item 4 Shut-off valve on the 3rd vertical cylinder Item 5 Shut-off valve on the upper horizontal cylinder Item 6 Shut-off valve on the lower horizontal cylinder Manufacturer’s technical description: Sturdy welded frame construction made from thick-walled special hollow sections, sliding carriages and pressure beams with 50 mm hole spacing. Continuous abutment on the left-hand side for width compression; lower abutment on two levels. Vertical press cylinders mounted on special pressure beams with one-handed quick-adjustment and weight compensation, height-adjustable in 50 mm hole spacing; long sliding carriages ensure the long-term absorption of high pressing forces. Quick, smooth width adjustment via a ball-bearing-mounted carriage with central locking, fixed at 50 mm intervals. Upper horizontal press cylinder infinitely height-adjustable and fitted with weight compensation. Lower horizontal press cylinder with centring bores for the two abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Pressure plate and support width 130 mm Electro-hydraulically controlled machine, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm, double-acting, with weight compensation and one-hand quick-adjustment, 2 horizontal pressure cylinders d = 40 mm, stroke 80 mm double-acting, with weight compensation; 2 manual control valves, pressure gauge, 1 pressure regulating valve from 20 to 150 bar (corresponding to 400 to 3000 kg) vertical pressing force, with a 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working dimensions: 3000 mm x 2000 mm (length x height) ----- Price of the above machine on enquiry! ----- Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Further options available on request. Please contact us for the full price list! ----- Laedpfx Aoz Sd Dbokwsh (Technical data as per the manufacturer, subject to change; the illustration may show optional equipment!) The images show a similar model. Original images are not yet available.

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 410 kg, total length: 1,050 mm, total width: 1,040 mm, total height: 1,240 mm, number of drawers: 5, Directly from the manufacturer, the original from the patent holder Apfel GmbH. Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Pull-outs : gray-white structure (RAL 9002) Laodpfx Akeur Racjwoh Payload per pull-out 900 kg Product code: 94032080 Swiss commodity code: 9403.2010 Origin: DE/08 Weight: approx. 410 kg As a set approx. 26 running meters of press brake tools fully assembled. Available in different sizes and with many accessories!

Condition: new, Year of construction: 2026, pressing force: 500 t, DURENDUS 500 T Workshop Press – Single-Column Press – 1,600 mm clear width, 550 mm stroke The machine shown here has already been built and delivered to a customer. We can produce this machine for you very quickly – and are happy to take individual options into account. This is a hydraulic workshop press for pressing, straightening and assembly work in workshop and industrial environments. Options (on request): The options listed are based on realized customer projects and enable a targeted adaptation of the machine to the respective application. The basic machine represents a functional standard version – in practice, it is extended in most cases by additional equipment and configured accordingly to the specific project. * Tabletop with X-shaped T-slot 800 × 1,200 × 120 mm * Pressure adjustment * Lateral displacement of the press ram (1,000 mm) * Bending tool * Torsion-proof cylinder with manual stroke adjustment * V-profile straightening bolster in combination with tabletop * LED lighting * Foot switch * Cooling ===== Technical data + information: ==== General information * Type: Workshop press * Press force: 500 t (optionally adjustable) * Total weight: approx. 5,000 kg * Overall dimensions (W × D × H): 2,950 × 1,100 × 2,850 mm ==== Working area Ljdpfx Akoy H Drwowsah * Clear width: 1,600 mm * Open depth: 550 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Usable width of crossmember: 1,600 / 600 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 400 mm * Piston rod: Ø 265 mm * Height adjustment: via chain mechanism ==== Speeds * Idling speed: 8.6 mm/s * Return speed: 15.3 mm/s ==== Hydraulics & Drive * Pump output: 65 l/min * Motor power: 30 kW * Hydraulic tank: 150 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Hand lever operation * Manual fine adjustment via hand lever * Connection: 400 V / 50 Hz * Total connected load: approx. 32 kW ==== Equipment * Height-adjustable crossmembers with bolt locking * Chain mechanism for table adjustment * Pressure gauge for pressure display * Emergency stop switch * CE certification * Two-layer coating according to RAL ===== Pressing, ejecting, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directives, as well as European Machinery Directives (Directive 2006/42/EC), the EC standards and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on these. Our great strength is special machine construction and press automation. We distribute tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics of the presses, we mainly use components from leading European manufacturers.

Condition: good (used), Code: 0499 Brand: COMAFER Model: DINAMIC 70/60 - CE Standard Hydraulic briquetting machine for compacting sawdust and wood shavings, for joinery workshops, furniture, bespoke furnishings, wooden joinery and other applications – CE Standard Technical data: The advantages of briquettes are: Twice the calorific value of wood Almost no residue after combustion Much cleaner boilers Briquette diameter 65 mm Lodj Aaq Nkspfx Akwsah Output 30/80 kg Pump motor 7,5 Hp Wood chip hopper diameter 1000 mm Overall dimensions mm 1100 x 1800 x 1650 h Weight kg 800

Condition: used, Year of construction: 1994, CNC press brake Manufacturer: Blemas Type: 100-33 Year of manufacture: 1994 CNC control: Cybelec DNC 74 PSG Press force: 100 tons Lasdpfoyvfklex Akwsh Working width: 3 m Weight approx.: 8 tons Dimensions approx.: 3,600 x 1,600 x 2,600 mm 191026ä

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, Beyeler hydraulic pressbrake Laodpfxsz Sy Nxs Akwoh Model PR 3 Year : 1999 Capacity : 3100 mm. x 150 ton Control : 3 axis Cybelec Cyb Touch 12 (Touch screen control built on the machine 2-3 years ago) Many, many toolings Can be seen and tested after previous agreement

Condition: new, Year of construction: 2026, pressing force: 20 t, DURENDUS 20 T Workshop Press – Single-Column Press – 600 mm clear width, 400 mm stroke The machine shown here has already been built and delivered for a customer. We can deliver this machine from stock or manufacture it new – and we are happy to take individual options into account. This is a hydraulic workshop press for pressing, straightening and assembly work in workshop and industrial environments. Options (on request): The listed options are based on realized customer projects and enable targeted adaptation of the machine to the specific application. The basic machine represents a functional standard version – in practice, it is usually expanded with additional equipment and configured accordingly for the specific project. * Tabletop with X-shaped T-slot (from 60 t) * Pressure adjustment * Lateral displacement of the press ram (from 60 t) * Bending tool (from 60 t) * Twist-proof cylinder with manual stroke adjustment * V-profile straightening support in combination with a tabletop * LED lighting * Foot switch * Cooling ===== Technical Data + Information: ==== General Information * Design: Workshop press * Press force: 20 t (optionally adjustable) * Total weight: approx. 350 kg * Overall dimensions (W × D × H): 1,100 × 700 × 2,350 mm ==== Working Area * Clear width: 600 mm * Open depth: 200 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Cross member usable width: 600 / 470 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 90 mm Lajdjy E Nnnjpfx Akwoh * Piston rod: Ø 50 mm * Height adjustment: via chain mechanism ==== Speeds * No-load speed: 7.8 mm/s * Return speed: 11.3 mm/s ==== Hydraulics & Drive * Pump output: 3 l/min * Motor power: 0.75 kW * Hydraulic tank: 12 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Hand lever operation * Manual fine adjustment via hand lever * Connection: 400 V / 50 Hz * Total connection power: approx. 1 kW ==== Equipment * Height-adjustable cross members with pin locking * Chain mechanism for table adjustment * Manometer for pressure indication * Emergency stop switch * CE certification * Two-layer paint finish according to RAL ===== Pressing, unpressing, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on them. Our great strength is the construction of special machines and the automation of presses. We distribute tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics of the presses, components from leading European manufacturers are predominantly used.

Condition: new, Year of construction: 2026, pressing force: 100 t, DURENDUS 100 T Workshop Press – Single-Column Press – 1,000 mm clear width, 400 mm stroke The machine shown here has already been manufactured and delivered for a customer order. We can supply this machine from stock or manufacture it new – with pleasure, taking into account individual options. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial applications. Options (upon request): The listed options are based on realized customer projects and enable a targeted adaptation of the machine to the respective application. The basic machine represents a functional standard version – in practice, it is usually expanded with additional equipment and configured accordingly to the project. Tabletop with X-shaped T-slot 650 × 900 × 90 mm Pressure setting Lateral displacement of the press ram (700 mm) Bending tool Torsion-resistant cylinder with manual stroke adjustment V-profile straightening bolster in combination with the tabletop LED lighting Foot switch Cooling ===== Technical data + information: ==== General information Design: Workshop press Press force: 100 t (optionally adjustable) Total weight: approx. 900 kg Overall dimensions (W × D × H): 1,600 × 900 × 2,550 mm ==== Work area Clear width: 1,000 mm Open depth: 350 mm Installation height: 250–900 mm (variable) ==== Table & Ram Cross member usable width: 1,000 / 620 mm Ram stroke: 400 mm Cylinder diameter: Ø 190 mm Piston rod: Ø 115 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 8.5 mm/s Return speed: 13.4 mm/s ==== Hydraulics & Drive Lsdpfxsy Hqqas Akwoah Pump output: 14.5 l/min Motor power: 4 kW Hydraulic tank: 29 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 4.5 kW ==== Equipment Height-adjustable cross members with pin locking Chain mechanism for table adjustment Pressure gauge for pressure indication Emergency stop switch CE certification Two-layer paint finish according to RAL ===== Pressing, un-pressing, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive, as well as European Machinery Directive (Directive 2006/42/EC), the EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength is special machine construction and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Year of construction: 1978, condition: used, Pressing force: 75/5kN, motor power: 11kW, an on-site inspection is possible. Ledpfx Aj Adt H Tokwoah

Condition: used, Year of construction: 2015, machine/vehicle number: 1606.18, functionality: fully functional, pressing force: 163 t, stroke length: 700 mm, table width: 2,000 mm, table length: 1,400 mm, table height: 800 mm, total length: 2,400 mm, total width: 3,200 mm, total height: 5,200 mm, overall weight: 28,000 kg, Equipment: documentation/manual, Hydraulic 4-Column Press – 163 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 163 T. The machine has a table size of 2,000 × 1,400 mm, an open height of 1,300 mm, and a stroke of 700 mm, making it suitable for forming, straightening, pressing, inserting, and assembly operations in industrial applications. ##### Technical Data + Information: Hydraulic 4-Column Press – 163 T – 2,000 × 1,400 mm ==== General Information - Manufacturer: HYMAG - Type: Hydraulic 4-Column Press - Model: HS 4 160-K3 - Machine Number: 1606.18 - Year of Construction: 2015 - Pressing Force: 163 T - Rated Force: 1,600 kN - Table Size (Working Area): 2,000 × 1,400 mm - Ram Plate Size: 2,000 × 1,400 mm - Table Height: 800 mm - Open Height: 1,300 mm - Stroke: 700 mm - Front Clearance: 2,010 mm - Side Clearance: 900 mm - Overall Height: 5,200 mm - Overall Width: 3,200 mm - Overall Depth: 2,400 mm - Total Weight: 28 T - Basement Required: No ==== Hydraulic Cylinder - Max. Working Pressure: 305 bar - Return Speed Downwards: 220 mm/s - Return Speed Upwards: 150 mm/s - Initial Pressing Speed: 45 mm/s ==== Hydraulics & Drive - Main Motor: 55 kW - Additional Hydraulics: 7.5 kW - Auxiliary Motor: 7.5 kW - Cooling Motor: 1.5 kW - Oil Tank: 600 l - Drive Type Pump (Drive I): V30D115RKN - Drive Type Additional Hydraulics (Drive II): PGH3-2X/016 - Cooler Type: TFS/A-20-400 ==== Tooling - T-Slots: M20 according to DIN 650 Lodpjzq Apgefx Akwjah ==== Control System - Valve Voltage: 24 V ==== Safety - Shear Pad Dampening - Maintenance Platform - Follow-Up Travel: 17 mm - Follow-Up Time: 90 ms - Safety Distance: 180 mm ==== Electrical Connection - Operating Voltage: 400 V - Main Motor Current Draw: 98 A - Auxiliary Motor Voltage: 400 V - Auxiliary Motor Current Draw: 15 A - Cooling Motor Voltage: 400 V - Cooling Motor Current Draw: 4 A ##### Application Areas: Forming, deep drawing, straightening, inserting, embossing, assembly work, toolmaking, mold making, mechanical engineering, metalworking, contract manufacturing, series production (Hydraulic 4-Column Press, 4-Column Press, Hydraulic Press, HYMAG, HYMAG HS 4 160-K3, 163 T Press, 163 Ton Press, Forming Press, Deep Drawing Press, Straightening Press, Inserting Press, Assembly Press, Industrial Press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply with all aspects of the Brazilian national safety directive NR 12, which builds upon these. Our core strength is in the design and construction of custom machinery and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. The hydraulics of the presses predominantly use components from leading European manufacturers.

Condition: good (used), Year of construction: 2010, Offer 26321 Technical data: - Maximum pressing force approx. 100 t - Maximum ram stroke approx. 159 mm - Pressure platen on the left and right can be moved using a hand crank Lsdpfxe Aazate Akwoah - Stand width approx. 780 mm - Stand depth approx. 300 mm - Maximum installation height approx. 820 mm - Table height adjustable in 6 positions with hand crank and pin grid - Pin grid spacing 140 mm - Connection 400 V - Space required approx. W 1550 x H 1900 x D 1000 mm - Weight approx. 850 kg

Condition: good (used), Code: 0504 Brand: ORMAMACCHINE Model: NPC 4/40 Hydraulic cold press for panels, furniture, woodworking shops, custom-made furniture, doors, composite materials, aluminum, and various other applications Sturdy structure Ljdpfxo Adqzns Akwsah Platens dimensions mm 2500 x 1200 covered with new aluminum sheets N° 4 pistons Total thrust 40 tons Motor Hp 2 Perimeter emergency cable Overall dimensions mm 3000 x 1450 x 2100 h Weight kg 2200

Condition: excellent (used), Year of construction: 2010, Assembly line for cabinet bodies, consisting of: The Ligmatech press can be sold separately and was manufactured in 2010; the rest of the system was manufactured in 1996. Pos. 1: Assembly table with conveyor belt 2500*800mm and small parts shelf Pos. 2: Roller conveyor approx. 6000*800 Pos. 3: Glue application station for cabinet body sides with 1 glue gun Pos. 4: Roller conveyor approx. 4000x800mm Pos. 5: Cabinet body lowering station approx. 3000*800; adjustable from working height of 850mm to 300mm Pos. 6: Ligmatech cabinet body press MPH 510/25/09/S Profiline, manufactured in 2010 with automatic infeed and outfeed of cabinet bodies (belt conveyor), safety light curtain at the front Machine data: for cabinet bodies with Ledpfx Aszi N Rujkwoah Length: 250-2500 mm Width: 250-1000 mm Height: 150 -1400 mm Pressing force: 14 KN Positioning speed: 25 mm/s Working height: 300 mm Space requirement: 4000 x 750 x 2300 mm Weight: 2200 kg Pos. 7: Cabinet body uprighting station approx. 3000*800mm Pos. 8: Belt conveyor 4000*800 Pos. 9: Cabinet body discharge station 1200*800mm Pos. 10: Cabinet body assembly station, height-adjustable, with belt conveyor 4000*800

Condition: good (used), Year of construction: 1989, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: EBU, Single-column eccentric press type EBU H100F -Pressure capacity: 100 tons -Clutch: hydraulic -Drive: 4.5/6.9 kW 1440/2890 rpm -Stroke rate: 66/100 rpm -Stroke: adjustable 20-140 mm -Pushrod adjustment: 100 mm -Table size: 890 x 620 mm -Table cutout: Ø 290 mm Lodsz Hyvgopfx Akwsah -Protrusion: 320 mm -Punch holder: Ø 50 mm -Insertion height: 480 mm -Dimensions: 1500/2200/H2770 mm -Weight: 6500 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 443 h, Model Amada HFE MK2 80 x 2500 , 4 axis Hydraulic Downstroking Press Brake VERY LOW HOURS 443 Year 2014 Tonnage 80 tonnes Max. Bend Length 2500 mm Stroke Length 200 mm Lsdpfozmtqaex Akwjah Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power 9kw Weight 5600 Kg guarding Erwin Sick machine mounted light screen guards, side and rear interlocked fencing Dimensions Machine Length 3950 mm Machine Depth 2580 mm Machine Height 2540 mm Distance Between Side Frames 2125mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: excellent (used), Year of construction: 2010, Model Amada HFE M2 103t x 3110 3m, 8 axis Press Brake Year 2010 Very low hours Tonnage 100 tonnes Max. Bend Length 3110 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power Weight 6600 Kg Laodpezb Eg Rofx Akwoh Feissler machine mounted Laser guards ,side and rear interlocked fencing Dimensions Machine Length 4535 mm Machine Depth 2580 mm Machine Height 2680 mm Distance Between Side Frames 2705mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 10,000 kg, power: 264 kW (358.94 HP), input voltage: 400 V, 2 used Salmatec presses, type Maxima 840/125 LF Suitable for compressing sawdust, with forced feed. The presses are equipped with an automatic grease lubrication system for the rollers and main shaft bearings. In addition, there is a lifting beam on the press for changing rollers and dies. The motors are 132 kW and of the Hoyer brand, manufactured in 2016, IE3 efficiency class. Lasdpoz I Tzxefx Akwoh The presses have always been maintained by Salmatec and have recently been fitted with refurbished rotors. Several rollers and dies are included with the presses. Interested or would you like more information? Please feel free to contact us for specifications, photos, and price.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, stroke length: 215 mm, overall weight: 7,300 kg, pressing force: 86 t, TECHNICAL DETAILS Pressing force: max. 850 kN Stroke: max. 215 mm Operating pressure: max. 300 bar Follow-up time: max. 95 ms Follow-up travel at 220 mm/s: max. 10 mm Follow-up travel at 160 mm/s: max. 8.5 mm Safety distance: min. 190 mm MACHINE DETAILS Lsdpfez Hvgzex Akweah Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V DC Compressed air connection: 6 bar Weight of the press: 7,300 kg