Used Fort F 21 for sale (27,151)

Condition: ready for operation (used), empty load weight: 1,300 kg, x als gemotoriseerd Max longitudinal travel X-axe: 815 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 420 mm Power on spindle: 2 HP Admission in millinghead: ISO 40 Max quill travel Z': 130 mm Spindlespeeds: 57 > 2275 rpm Table size: 1120 x 255 mm Itodpfx Asxpgfiea Eer

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, rotational speed (min.): 1,500 rpm, rotational speed (max.): 9,000 rpm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1997 Control system: Heidenhain Working ranges X-axis approx. 3,000 mm Itedpfx Ajx Iuguea Eer Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates shown and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Linear axes drives Feed speed X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Space required by machine (without control cabinet): approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is delivered without enclosure and must be enclosed in a CE-compliant manner by the buyer. Note: The tool changer, vacuum table including pump, and extraction unit can be purchased at an additional cost. However, they are NOT included as standard equipment with the machine!

Condition: used, Year of construction: 2009, Overview This KEG bottling unit Micromat 2/2-b was built by M+F KEG Technik in 2009. It is composed of a KEG washer and KEG filler. Until dismantling it was used in a brewery in Belgium. Technical details  Capacity: 20- 35 keg/h KEG type: 20l/30l DIN and EURO Fitting type: Typ S Station 1: Interior cleaning Station 2: Rinsing, sterilization and filling Semi automatic system with intergrated CIP, CIP tank at the back of the installation Dimensions  Length: 1,100 mm Width: 1,300 mm  Height: 2,200 mm +/- 50 mm  Electrical connection Voltage: 230/ 400 V, 50 Hz, 3 phases Connected load: 0,5 kW (without tank pumps)  Iodpfxexrfcxs Aa Ejtr

Condition: used, functionality: fully functional, gearing type: automatic, fuel type: diesel, operation weight: 7,500 kg, Year of construction: 1977, Technically in order Iedpfxot S Idrj Aa Eotr

Condition: used, functionality: fully functional, empty load weight: 1,395 kg, overall weight: 3,150 kg, axle configuration: 4x4, color: white, suspension: steel, number of seats: 3, Year of construction: 2011, operating hours: 2,849 h, Equipment: all wheel drive, cabin, trailer coupling, Tipper: Itedpfex Agvuex Aa Esr + Fort + Pantera L24A + Switchable all-wheel drive + Reduction gear + First registration: 14.11.2011 + 2,884 operating hours + Lombardini 4-cylinder diesel engine, type LDW1404 + 38 hp; 1,371 cc + 3-way tipper + Cabin protection grille + Steel floor + Prepared for trailer hitch + 5-speed manual transmission + 3-seater + Rear window + Storage box + Unladen weight: 1,395 kg; GVW: 3,150 kg + 3665 mm x 1570 mm x 2130 mm (LxWxH) + Platform dimensions: 2430 mm x 1570 mm + Max speed 40 km/h + Municipal vehicle from first owner Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: used, tank capacity: 160 l, GENERAL Design: suspended Remarks: Suspended design in a tiltable frame made of V2A; without bottom outlet; top opening diameter approx. 700 mm (tapering towards the bottom; see photos) Total height: 1,100 mm Heating/Cooling: available Top: open with loose lid Stand type: frame Location: Bremen Nameplate: Volume: 160 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Itodpoxqduqsfx Aa Esr Outlet: not available MATERIAL SPECIFICATION Temperature system material: V2A 1.4301 (AISI304)

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Itodpfx Aewxtcpea Esr Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with portable hand control unit Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x Width x Height: approx. 4,500 x 2,000 x 400 mm Longitudinal T-slots 18H12 T-slot spacing 250 mm (Shown zero-point clamping plates and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Linear axis drives Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Iodpsx Ifdkjfx Aa Ejtr Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 touch probe Condition of the machine Fully operational, machine is supplied without enclosure and must be enclosed by the purchaser in accordance with CE regulations.

Condition: used, Year of construction: 2012, Hersteller CAT Stemmhammer CAT für 2,5 - 4 t Bagger ohne! +++++ Itjdpfx Ajhmriusa Ejr Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2002, TETRA PAK TBA 21-1000 SQUARE ASEPTIC FILLER YOM 2002 V050 52.000 RUNNING HOURS CAPACITY 7000 CARTONS PER HOUR Iedpfxex Agmyo Aa Eotr VERY GOOD CONDITION COMPLETED BY THE TCA88 1000 SQUARE APPLICATOR (SOME PARTS MISSED) DISMANTLED AND STORED IN POLAND, LASK CITY.

Condition: refurbished (used), Year of construction: 2002, Special construction decanter for area were explosion proof requirements are a special demand , decanter equipped with sistem for inert gas who prevent explosions , flat cone decanter +clarifier GEA WESTFALIA SA 20 gas tight separator ATEX 11KW 6500 RPM 30 kw main drive , hidraulic back drive 7.5kw oil pump , 4000 rpm , 15mc/h decanter remove down to 10 microns solids from liquids , clarifier separator will remove down to 0.2 microns Itodpfov Tu Scex Aa Eer complete sistem available with separator with the same settings Explosion proof motor and sistem

Condition: ready for operation (used), Year of construction: 2004, Various barrels are available. 1) 12x as-new Speidel barrels with accessories. 2) 3x stackable tanks C. F. Maier KK, year of manufacture: 2004, capacity: 650l. An on-site inspection is possible. Itedpfjxtfgmox Aa Esr

Condition: good (used), Schmedt PraForm 21-50 joint-setting press Book press with a joint forming. Production Schmedt, Germany. Iedpfx Aasxx Hyxe Estr The machine is in very good condition, ready for production. Technical data: max format: 450 x 520 x 100 mm Weight 264kg Power supply 230V + compressed air.

Year of construction: 2025, condition: new, Screening machine | Oscillating screen type ASM-550 Demonstration machine - Make: S&F GmbH - Type: ASM-550 - Screening capacity: approx. 60 - 70 m³/h (for wood chips and sawdust) - Screening area: 5.4 m² - Fractions: 3 or 4 pieces Isdpfx Aaextfv Ie Eotr - Screen decks: 3 pieces - Drive power: 4.0 kW - Machine weight: approx. 3,800 kg - Machine colour: RAL 6011 Reseda green - Screen inserts and material outlet freely selectable Suitable for screening the following bulk materials, among others: - Wood chips and wood shavings - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Vibrating screen machine | Flat screen | Vibrating screen | Roll sifter | Screening machine for wood chips

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. Ijdpou Impysfx Aa Eetr - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - Lath hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: good (used), max. working width: 2000 mm Iodpfe Ixynox Aa Eetr for metal sheets up to: 1 mm opening width top clamping bar: 70 mm adjustment bending cheek: 10 mm space needed: 2300 x 600 x 1050 mm

Condition: excellent (used), offer flexo printer F&K FP 15S gearless, 8 colors, year 2011 and 1300 mm width, fully equipped with SMART GPS mounter system Itedpfxsxf Iyto Aa Ejr

Condition: used, Completely Refurbished by Sipack 2007 Vacuum feeder Itjdpsxxvzxofx Aa Esr N 4 colors Stripper Stacker

Condition: used, functionality: unexamined, Year of construction: 2014, Timber truck body F. Müller Forsttechnik GmbH Eslohe Itodpfoxc T Uqsx Aa Esr The body was mounted on a Scania R480 and was fully functional until removal. Complete fittings for crane mounting, hydraulic tank, fifth wheel plate, lighting etc. are present.

Condition: used, Year of construction: 2017, Overview The semi-automatic KEG filler was built in 2017 by the German company m+f KEG-Technik and fills 50-60 KEGs/ h into various containers. It is still in operation and can be inspected.  Technical data Capacity: 50-60 KEG/h Formats: 20l, 30l  Containers: KeyKeg, Dolium-KEG, PETainer, KEG  Filling head made of stainless steel  Pressure control by pressure switch (controls hot water and steam pressures for flushing the filling head) Sight glass for product feed line Dimensions (LxWxH): 1.150mm x 800mm x 2.150mm ±50 Control: Siemens S7  More pictures, videos and technical documentation available on request Isdpfx Aasl Hx Nrs Ejtr

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. tool trolley with tool set 272 pieces. See pictures Isdpju Imp Tsfx Aa Eetr

Condition: used, Tool holder, milling holder, milling tool, cutter head, milling arbor -Manufacturer: W&F, milling adapters SK50 18 pieces -9 pieces: Drm. 16 x 100 mm -2 pieces: Drm. 20 x 100 mm -3 pieces: WE 14x120 Z -1 piece: WE 14x160 Z -1 piece: Drm. 12 x 120 mm Itedpfshd Rqxex Aa Eer -1 piece: Drm. 18 x 160 mm -1 piece: Drm. 18 x 160 mm -Various types: see photos, more pictures can be sent -Price / fee: complete -Dimensions: 600/400 / H220 mm -Weight: 69.1 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale: (VIDEO available on request) Iodpfowqz Nnsx Aa Eetr MARKL / BAVARIA bottling line for breweries & beverage industry, suitable for 0.5 l & 0.33 l bottles Output: 3,000 – 15,000 bottles/h Bottle filling and capping machine for crown caps d = 26 mm with pre-evacuation system Bottle types: 0.5 l NRW, 0.5 l long-neck, 0.5 l Warsaw, 0.33 l long-neck Additional detailed technical data: see PDF Machine is immediately available, removed from production only about 2 months ago.

Condition: new, Make: S&F GmbH Type: MFB-500/8 Ijdpfx Aexk Tg Noa Estr Belt width: 500 mm Centre distance (A-A): 8,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: Drum Motor Motor power: 2.2 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 800 kg Machine colour: RAL 6011 reseda green Suitable for the following bulk materials, among others: Potatoes, Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° Itedpfx Aow Rl S Sja Eer C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.