Used Forklift In India for sale (24,116)

Condition: new, functionality: fully functional, machine/vehicle number: 25D3501412, Year of construction: 2025, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 2,400 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, motor manufacturer: Hyundai, fork length: 1,200 mm, tire condition: 100 %, overall weight: 5,825 kg, Equipment: UVV, all wheel drive, sideshift, The UN 4WD Rough Terrain Forklift 3.5T is specifically designed for tough operating conditions. Equipped with a powerful Hyundai diesel engine, all-wheel drive, differential lock, and heavy-duty off-road tires, it delivers maximum traction and reliability. Gujdpfx Amjxzpv Isueb Detailed technical specifications can be found in the last image.

Condition: excellent (used), Year of construction: 2012, operating hours: 2,091 h, lifting height: 5,550 mm, free lift: 10 mm, fuel type: diesel, mast type: duplex, power: 55 kW (74.78 HP), gearing type: automatic, fork length: 1,200 mm, total height: 2,850 mm, total length: 3,700 mm, total width: 2,100 mm, color: blue, Very nice 2012 MANITOU M50-4 T 3-E3 4x4 rough terrain forklift (4x4) with triplex mast, side shift, 4-cylinder Perkins diesel engine, mast height: 5,500 mm, only 2,092 operating hours (last serviced at 2,047 hours) + complete set of off-road tires. = Further Information = General Information Year of manufacture: June 2012 Gsdpfx Amsy Apafououb Model year: 2011 Registration number: TNG-03-R Driveline Drive: Wheel Weights Unladen weight: 8,040 kg Operational Mast height: 5.5 m Lifting capacity: 5,000 kg Overall height: 285 cm CE marking: yes Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more information.

Condition: new, machine/vehicle number: A4E9A01932W, load capacity: 2,500 kg, lifting height: 4,350 mm, load center: 500 mm, mast type: triplex, motor manufacturer: Kubota, fork length: 1,220 mm, Equipment: CE marking, all wheel drive, sideshift, TECHNICAL SPECIFICATIONS - 2.5 tonnes - Fuel: Diesel - Model: 4x4 - Engine: Kubota V2403 StageV - Fork length: 1220 mm - Mast: Triplex 4.35m AVAILABLE OPTIONS - Side Shift - OPS System - Suspended seat Gujdemxkdhepfx Amuob

Condition: new, load capacity: 3,500 kg, lifting height: 4,350 mm, load center: 500 mm, mast type: triplex, motor manufacturer: Kubota, fork length: 1,220 mm, empty load weight: 5,545 kg, Equipment: CE marking, all wheel drive, sideshift, TECHNICAL SPECIFICATIONS - Lift capacity: 3.5 tonne - Fuel: Diesel - Model: AWD (4x4) - Engine: Kubota V2403 StageV - Fork length: 1220 mm - Mast: Triplex 4.35m AVAILABLE OPTIONS Gusdpfxjmxkm Uj Amusb - Side Shift - OPS System - Suspended seat

Condition: not inspected (used), functionality: unexamined, Year of construction: 2021, machine/vehicle number: 053423392, battery capacity: 930 Ah, overall weight: 2,178 kg, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Battery: 80 V 930 A Nominal energy: 70.7 kWh Battery condition: very good, measured at 83.39 V Dimensions & Weight Dimensions (L x W x H): 102 x 100 x 80 cm Weight: 2,178 kg EQUIPMENT Gsdpsytpnpofx Amujub Battery from a former Linde service unit All measurements are approximations. No liability is assumed for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with a large forklift on site at your own risk. Collection ONLY with e-mail payment confirmation! Collection WITHOUT prior notice Monday to Friday 7:00 am–4:30 pm. An overly high mast can be dismantled for transport upon request. If not collected within the agreed timeframe, a storage fee of €20 per machine per day will be charged (payment must be settled before collection).

Condition: used, Year of construction: 2000, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, MORI SEIKI SV-400 WITH 4TH AND 5TH AXIS VERTICAL MACHINING CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SV-400 YEAR 2000 CONTROL MORI FANUC MSC 501 TABLE SIZE 900.0 x 500.0 mm TRAVERSES (XYZ) X: 600.0 mm Y: 430.0 mm Z: 460.0 mm SPINDLE SPEED Up to 12,000 rpm SPINDLE TAPER BT 40 Guodpstvau Hsfx Amuob ATC 30 STATIONS RAPID TRAVERSE XYZ: 32,000 mm/min FEEDRATE 1-16000mm/min PLUS NIKKEN 4th and 5th AXIS UNIT RENISHAW PROBBING TWIN SWARF CONVEYOR COOLANT SYSTEM

Condition: used, Year of construction: 2005, TAKISAWA TC 350M CNC TURNING CENTRE MAKE TAKISAWA, MADE IN JAPAN MODEL TC – 350M L5 CONTROL FANUC 21-iTB YEAR 2005 TURRET 12 STATION MAXIMUM SWING 700.0 mm MAX TURNING DIAMETER 460.0 mm MAX TURNING LENGTH 510.0 mm TRAVEL X-AXIS 440.0 mm Z-AXIS 550.0 mm SPINDLE SPEED RANGE 2,500 RPM BAR CAPACITY 80.0 mm TBC PLUS C – AXIS Gjdpsy Eyb Eefx Amueub MILLING TAILSTOCK TOOL SETTING PROBE SWARF CONVEYOR 10” 3 JAW CHUCK TURRET TOOLING

Condition: excellent (used), I offer a professional vacuum pump from the renowned German manufacturer Becker, model VT 4.40. This device is designed for industrial use and is characterized by high reliability and maintenance-free operation. The pump features oil-free (dry-running) technology, which means it does not require oil and minimizes operating costs. Ideal for applications where cleanliness and stable vacuum are required. The visual condition is very good. The device is complete. Technical data: Manufacturer: Becker, Germany Model: VT 4.40 Year of manufacture: 2007 Capacity: approx. 40 m3/h at 50 Hz Vacuum: up to approx. 150 mbar absolute Motor power: approx. 1.25 kW Power supply: three-phase Speed: approx. 1420–1700 rpm Weight: approx. 38–40 kg Applications: CNC machines and vacuum tables Guodpfxoyxgt Io Amuob vacuum packaging wood industry printing and graphic arts material handling Advantages: oil-free operation – no oil service required quiet and stable performance robust industrial construction long vane life Made in Germany

Condition: excellent (used), For sale: Original J.D. Neuhaus PROFI pneumatic hoist, model LN-1T, with a lifting capacity of 250 kg (0.25 t). Manufactured in Germany in 1991 by J.D. Neuhaus Hebezeuge GmbH & Co., Witten-Heven – a global leader in pneumatic lifting systems. Technical specifications: • Model: PROFI LN-1T Guedpfoxtfnwjx Amujb • Lifting capacity: 250 kg (0.25 t) • Year of manufacture: 1991 • Power supply: 6 bar compressed air • Air consumption: approx. 3–4 m³/min • Chain: steel 5 x 15 mm, DIN 5684-8 standard • Controls: dual-lever (up/down) • Weight: approx. 35 kg Condition: • Used, fully functional. • Complete set including hook, control valve, and chain bag. • Normal signs of use, with no mechanical damage. Applications: Suitable for lifting tools, components, and parts in workshops, assembly lines, industrial plants, and ATEX zones (depending on version). JDN construction ensures reliability and durability – made in Germany, commonly used in the aerospace, petrochemical, and automotive industries.

Condition: excellent (used), For sale: Professional TEMPEST DD21 positive pressure blower, commonly used by fire departments, industrial facilities, paint shops, warehouses, for emergency ventilation, and anywhere extremely high air flow capacity and reliability are required. The unit is fully operational, powerful, and ready for work. The motor and control panel are EX (explosion-proof / ATEX) rated—this is a premium device rarely available on the secondary market. ————— Technical data: • Brand / Model: TEMPEST Power Blower – DD21 • Manufactured in: Germany • Year: 1998 • Power supply: 380V / 3-phase (400V) • Controller: CEAG GHG 635 0510  – Ui: 690V  – In: 4.0–6.3 A  – EX version • Motor: VEM motors GmbH – Made in Germany – ATEX  – Power: approx. 2.5–3 kW  – EX class: EEx e II T3  – Speed: 2850 rpm • Certification:  – AMCA CERTIFIED (certified air performance)  – ATEX / EX (explosion-proof) Gujdpfx Aoxyugpjmujb • Robust steel frame with transport rollers • Large metal impeller with very high efficiency ————— General condition: The unit is well-maintained, fully functional, and from a professional facility. Typical signs of use, but technically and structurally in very good condition. ————— Applications: • Fire departments – positive pressure ventilation • Warehouses, industrial halls, paint shops • Extraction of smoke, dust, fumes • Machine and process cooling • Air purging during service work

Condition: used, WEBSTER & BENNETT DH 48” VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL DH 48” TABLE DIA 1219.0 mm SWING 1524 mm HEIGHT UNDER RAIL 650.0 mm SPEED 4.5 – 100 RPM FEED RATE 0.0050” – 0.250” / 0.127 – 6.035 mm/min PLUS Gsdpfx Asxcn Huomujub 2 AXIS MITUTOYO DIGITAL READOUT 4 JAW CHUCK 4 CHUCK JAWS SAFETY GUARDING COUNTERWEIGHT CLEAN CONDITION

Condition: used, Year of construction: 2004, ECOCA SJ20MC 3 AXIS CNC TURNING CENTRE MAKE ECOCA, MADE IN TAIWAN MODEL SJ 20MC YEAR 2004 CONTROL FANUC 18-T MAX. TURNING DIA 170.0 mm MAX. TURNING LENGTH 300.0 mm SWING OVER BED 380.0 mm OVER CROSS SLIDE 225 MAX. SPINDLE SPEED 4,500 RPM POWER TOOL SPEED 4000 SPINDLE NOSE A-5 / A2-6 DRAW TUBE DIA 45 RAPID TRAVERSE RATE X24 / Z24 PLUS VDI20 TOOLING PARTS CATCHER SWARF CONVEYOR Gusdpfx Amstvav Iousb POWER TAIL STOCK TURRET TOOLING

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Thickness planer PANHANS Type 425 510mm The machine is in very good optical and technical condition. It comes from an assembly company and has only seen minimal use; everything is in original condition, with no components repainted. The machine has only been cleaned. Fully functional in all respects. - Equipped with kickback safety device - The planer knives are very easy and precise to adjust. Setting gauges, which can be mounted onto the cutterblock, are included to ensure maximum precision. - Chips are efficiently extracted thanks to the enclosed system. - Four-knife cutterblock for conventional strip planer knives. - The thickness table is mounted on two trapezoidal spindles, ensuring stability and torsion resistance - With protective hood, which can be lifted upward - Maximum planing width: 510mm; maximum planing height: 250mm - We provide personal delivery and demonstration throughout Germany for €220. This eliminates any risk at purchase. Delivery to other countries is also possible on request. - Quiet operation in compliance with DIN 45635 - Highly effective feed rollers; infeed and outfeed rollers are made of metal, with adjustable pressure on both rollers Gsdpfx Amsxdu Tqououb - There are two support rollers embedded in the table, which can be brought up when needed (particularly helpful when planing moist wood) - User manual included - Feed speed: 7 and 14 m/min, powered by a separate gear motor - 160mm extraction port - Thickness table elevates electrically, with fine adjustment via handwheel - Planing height is easily and precisely read from a mechanical counter - Achieves an extremely clean finish - 5.5 kW motor ensures virtually fatigue-free operation - The machine comes fitted with four sharpened knives - Extremely robust and durable design, top workmanship and highest quality - Ready for immediate use - 380V, 5.5kW - Speed: 5000 rpm - Year of manufacture: 1989 - Weight: approx. 800 kg - Certified GS tested version - Optimal, simple, quick, and safe operation - Heavy, solid, and durable construction—simply indestructible

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good condition, like new; the machine comes from a very small joinery and was used only very little. The machine is in its original state and has only been cleaned, with no touch-ups to the paint. You can mill slots and drill dowel holes on two levels without having to reclamp the workpiece. Gujdpfoynv E Rjx Amuob 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill slots, for example for lock cases and similar applications, or make all types of frame dowel joints, at right angles, butt joints, or mitred joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar applications. By drilling on two levels, using the stops and indexing rails, and due to the machine’s design, dowel joints can be produced in a very short time, which makes the machine highly efficient. The machine requires a compressed air connection of 6 bar (air consumption is very low). Right-hand rotation. Mills and drills very efficiently and cleanly. Supplied with 2 angle stops (one center stop and one side stop, which can be used on either side), plus a mitre stop. On the front of the machine table, there is a 2000mm long stop rail with 2 flip stops; the stop rail can be shortened or extended if required. Workpiece clamping is done with 2 pneumatic clamping cylinders. Height adjustment between drilling levels is also pneumatic; the pneumatic switch is located at the front of the machine, ensuring rapid adjustment of the index positions and drilling levels. Equipped with a precision 12mm indexing rail, featuring a center index and 12 indices left and right. Can be quickly converted for slot milling; in this mode, the machine can be used without indexing, with 2 adjustable stops left and right, allowing for a maximum working width of 420mm. Maximum drilling hole height: 100mm Maximum drilling depth: 150mm with stop and scale Maximum workpiece height: 160mm Everything functions perfectly. The machine is personally delivered and demonstrated by us anywhere in Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible on request. The machine table is 870mm wide, 140mm deep at the sides, and 350mm deep in the center. Professional equipment, not DIY store scrap. Ready for immediate operation. With 2-jaw drill chucks up to 20mm. Very stable and durable construction. The precision guides with play-free ball bearing bushings are in excellent condition and move smoothly.

Condition: new, pressure: 100motor: 15daylight: 500stroke lenght (max.): 400table diamension: 800 x 600tappet area: 800 x 600table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 230mm. Auxiliary cylinder: 2 pcs. Ø 50 x 30mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 11kw. - 15hp. ( IE-3 ) Pump: 23Liter / ASC. Speed : flow 110mm./sec. - return 200mm./sec. - Pressure : 9 mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 - (with T - grooves) Plunger plate: 800 x 600 - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Gujdsm Nntyepfx Amusb Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, pressure: 100motor: 11daylight: 500stroke lenght (max.): 400Tappet adjustment: 790 x 600table height: Fußboden zu Tischplatte Oberkannte - 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 barControl / Key Switch Modes:Setup Mode – Manual operation without light sensor Automatic Mode – Full speed with integrated light sensor Hydraulic System:Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 pcs, Ø 50 x 30 mm Auxiliary Guides: 2 pcs, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc, 23 L/min – Helical gear pump Speed:Approach: 110 mm/sec Return: 200 mm/sec Pressure phase: 9 mm/sec Machine Dimensions:Daylight Opening: 500 mm Stroke Length: 400 mm Ram Plate: 790 x 600 mm (with T-slots) Table Plate: 790 x 600 mm (with T-slots) Table Height: 850 mm (from floor to top of table) Hydraulic Equipment:REXROTH hydraulic control block & components Pressure adjustable via PLC (20 – 100 tons) Gjdpfxewrkcto Amuoub Speed adjustable via PLC Air oil cooler Pre-fill valve Pressure hold valve Control System:Siemens S7-1200 PLC Main control cabinet Safety PLC (SICK) Light curtains (SICK – 700 mm) Linear encoder for stroke adjustment 10” PLC touchscreen – BEIJER (German & English) Movable two-hand control unit Ethernet connection for remote support Visual and acoustic fault alarms Dual work area lighting In full compliance with EN 693 machine safety regulations Side safety doors (outward opening) Hydraulic proportional valves Dual-channel safety control User manual & parts list (German) Oil Volume: 220 L (Tank capacity: 250 L)Total Weight: approx. 5,500 kgOverall Dimensions: 1300 x 2000 x 2750 mmColor: RAL 7035 Light Grey & RAL 7016 Anthracite Grey Besichtigung unter Strom bei uns in Böheimkirchen 3071 (Neustiftgasse 34) möglich.

Condition: used, Year of construction: 2017, functionality: fully functional, For sale: Fully operational and lightly used belt dryer from New eco-tec. Optionally available with air scrubber and 180m³ silo for dried goods. The plant was in operation until recently and is ready for immediate use. The system spans 2 containers and has a belt length of 24m, rated for 1.5MW thermal output. The belt dryer is entirely made of stainless steel inside the containers. Viewing by appointment. Gujdpsyr Aiqjfx Amuob

Condition: excellent (used), For sale: a robust measuring device from the renowned German manufacturer AbaWerk Aschaffenburg. Made with a cast iron base and equipped with two hardened centering points for securing shafts and cylindrical workpieces. Perfect for use with toolmaker’s microscopes, measuring projectors, and in quality control applications. Technical specifications: • Manufacturer: AbaWerk Aschaffenburg (Made in Germany) • Center distance: approx. 115 mm Gusdsw Sav Ispfx Amujb • Stable, heavy cast iron base – secure clamping • Allows rotation of the workpiece between centers • Condition: used, fully functional Manufactured to industrial standards – precision and durability make these units highly sought after in metrology and toolmaking environments.

Condition: ready for operation (used), Year of construction: 2018, A fully automatic side-seal strapping machine Joinpack is available. Load capacity: 50kg, speed: approx. 24rpm, strap width: 9mm/12mm/15mm, strap material: PP, strap tension range: 15kg/70kg, frame opening: 600mm/850mm, sealing height: 650mm. Machine dimensions X/Y/Z: approx. 1450mm/600mm/850mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Gedpfx Amexvrvmeusub

Condition: excellent (used), • Original ZÜRN milling toolholder, Germany • Type: SK40 – TC40x06x100-AD (DIN 69871) • High manufacturing precision, balanced for CNC operation • Tool shank Ø6 mm, length 100 mm • Robust design – Made in Germany • Very good condition, ready for use Gedpfx Asxcx Sujmusub

Condition: used, Year of construction: 2001, TECHNOLOGICAL LINE FOR MANUFACTURING ROOFING ELEMENTS 1. Profiling machine 2. Insulation element production system 3. AL foil preparation system 4. Gluing system 5. Auxiliary components, technical documentation, certificates Guodpeyv E Aisfx Amusb Types of roofing panels produced on the technological line: - Roofing panels with modular dimensions 1100 mm x 1070 mm - Roofing panels with half-module dimensions 550 x 1070 mm - Roofing panels without anti-condensation layer in various lengths (up to 6 m)

Condition: new, M&S Gruseck GmbH NEW screening drums from the market leader – 100% MADE IN GERMANY! Gusdpfxoxnyp Ej Amusb Screening drum suitable for a Doppstadt SM620 Square staggered perforation (QV) 12mm Sheet thickness = 6mm --- Over 500 manufactured screening drums per year speak for themselves --- - Premium quality! - Individually tested! Perfect concentricity during operation! - Excellent value for money - Short delivery times! - Punched perforations for optimal screening results! - Various perforations available (square, round, honeycomb, etc.)! - Narrow web spacing for maximum screening surface! - Various sheet thicknesses! - Various materials available (at least S355)! - Special customer requirements are not a problem for us—they are our specialty! - All drums are painted! - Large selection in stock! - Compatible with all common screening machines!

Condition: new, M&S Gruseck GmbH NEW Screening Drums from the Market Leader - 100% MADE IN GERMANY! Screening drum suitable for a Terra Select T60 Square staggered perforation (QV) 15mm Sheet thickness = 6mm Godpfx Aoxny Egjmueub !!! Over 500 screening drums manufactured per year speak for themselves !!! - Premium quality! - Thoroughly inspected! Perfect running accuracy in operation! - Best price-performance ratio - Short delivery times! - Precision-punched perforations for perfect screening results! - Various perforations available (square, round, honeycomb, and more)! - Narrow bridges for optimal screening area! - Different sheet thicknesses! - Various materials possible (at least S355)! - Special customer requests are not a problem for us but our specialty! - All drums are coated! - Large stock selection! - Suitable for all common screening machines!

Condition: new, M&S Gruseck GmbH NEW Screening Drums from the market leader – 100% MADE IN GERMANY! Screening drum suitable for a Terra Select T60 Square staggered perforation (QV) 20mm Sheet thickness = 6mm !!! Over 500 screening drums produced per year speak for themselves !!! - Premium quality! - Always quality-checked! True running in operation! - Best price-performance ratio Gsdpfx Amjxny Hqousub - Short delivery times! - Stamped perforations for perfect screening results! - Various perforation types (square, round, honeycomb, etc.)! - Narrow bridges for optimal screen surface area! - Various sheet thicknesses! - Different materials possible (at least S355)! - Special customer requests are no problem for us—they are our specialty! - All drums are painted! - Large inventory available! - Suitable for all standard screening machines!

Condition: new, M&S Gruseck GmbH NEW Trommel Screens from the market leader – 100% MADE IN GERMANY! Trommel screen suitable for a Terra Select T40 Square offset perforation (QV) 25mm Sheet thickness = 6mm !!! More than 500 manufactured trommel screens per year speak for themselves !!! - High-quality workmanship! - Consistently tested! Perfect concentricity during operation! - Best price-performance ratio! - Short delivery times! - Stamped perforations for perfect screening results! - Various perforation styles (square, round, honeycomb, etc.)! - Narrow web spacings for optimal screening area! - Various sheet thicknesses available! Godpfx Ajxvqn Iemueub - Various materials possible (min. S355)! - Special customer requests are no problem for us—they are our specialty! - All drums are painted! - Large selection in stock! - Suitable for all common screening machines!