Used Folder for sale (643)

Condition: good (used), Size max 460 x 650 mm min 105 x 150 mm Speed max 160 m/min Power requirements 2,3 kW (220/380V, 50Hz) Length 2.610 mm Width 1.100 mm Equipment feeder: flat pile feeder counter Dedpfjd Tndcsx Acvjcf 1st folding unit: 4 buckle plates noise prevention 2nd folding unit: knife-folding unit delivery belt delivery

Year of construction: 1998, condition: used, Built in 1998 Size max 740 x 1.110 mm Equipment: feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife delivery: • belt delivery Djdpfx Acsdmdtbovocf

Condition: ready for operation (used), Size with pallet feeder max 660 x 1040 mm Speed max 210 m/min Equipment • pallet feeder with Tremat suction head 1st folding unit: • 4 buckle plates • noise prevention peripheral units and deliveries • marking device MKE 66 Dcjdod Iq S Ropfx Acvof • upright stack delivery with pressing SBP 66

Year of construction: 1989, condition: used, Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment • flat pile feeder Djdpfx Asc Rhvtscvecf 1st folding unit: • 4 buckle plates • Festa foldingrolleradjustment • noise prevention

Year of construction: 1997, condition: good (used), Built in 1997 Size 1.300 x 1.650 mm Djdodymm Hjpfx Acvocf Speed 150 m/min Equipment feeder • pallet feeder (MABEG) 1st folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 2nd folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 3rd folding unit • 2 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention delivery • belt delivery

Condition: ready for operation (used), Size with continuous feeder: Dcjdsd N D Nispfx Acvof max 760x2000 mm min 150x180 mm Size cross fold: min 150x200 mm Size threefold: min 200x300 mm Size four fold: min 300x400 mm Speed: max 180 m/min Equipment feeder: • continuous feeder • vacutable 1st parallel folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left & right standard accessories: • 1 set of operator manuals • 1set of electrical diagrams • further information: • as is, cleaned available: • immediately

Year of construction: 1997, condition: used, Built in 1997 Size max 660 x 1.020 mm Equipment feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife • polyurethane-steel folding rollers delivery: • belt delivery Dcjdedmdt Uopfx Acvof

Year of construction: 1999, condition: good (used), Built in 1999 Size max 820 x 1.750 mm Size with continuous feeder max 820 x 1.750 mm min 150 x 150 mm Speed max 205 m/min Length with continuous feeder 7.680 mm Width 3.210 mm Equipment feeder: continuous feeder Djdpfjfbff Uox Acvecf 1st folding unit: 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts 2nd folding unit: working width max. 68 cm 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts peripheral units and deliveries belt delivery

Condition: good (used), Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment • flat pile feeder • counter PCS 100 1st folding unit • 4 buckle plates Dodohf Aw Uspfx Acvocf • Festa foldingrolleradjustment • pu steel folding rollers • noise prevention 2nd folding unit • attachable knife-folding unit • mobile knife-folding unit KB 36 peripheral units and deliveries • attachable belt delivery

Condition: ready for operation (used), Size with flatpile feeder max 660 x 1040 mm Speed max 210 m/min Equipment feeder • flat pile feeder • Tremat 1st folding unit • 4 buckle plates • noise prevention 2nd folding unit • 4 buckle plates • noise prevention delivery Dcedpjd Iq S Ujfx Acvsf • delivery SBP 46

Year of construction: 1997, condition: used, Built in 1997 Size with flatpile feeder max 520 x 840 mm min 100 x 150 mm Speed max 180 m/min Dcedjdm U Dhspfx Acvsf Equipment: • flat pile feeder • counter 1st folding unit: • 4 buckle plates 2nd folding unit: • 4 buckle plates peripheral units and deliveries: • belt delivery

Condition: ready for operation (used), Size max 560 x 920 mm min 150 x 180 mm Speed max 180 m/min Dcsdpfed A Hcvsx Acvef Equipment feeder: • continuous feeder • MS control • counter 1st folding unit: • 4 buckle plates • noise prevention delivery: • belt delivery

Year of construction: 2002, condition: used, Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Equipment: feeder • pallet feeder (MBO) • MC control 1st folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts • noise prevention Dcjdpfx Ajddh Evscvsf delivery: • belt delivery

Year of construction: 2002, condition: ready for operation (used), Built in 2002 Size with continuous feeder max 660 x 1.280 mm Size cross fold min 150 x 200 mm Size threefold min 200 x 300 mm Speed max 180 m/min Length with continuous feeder 5.890 mm Width 2.340 mm Equipment: feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • noise prevention 2nd folding unit: • cross-fold knife • noise prevention 3rd folding unit: • third-fold knife • Lärmschutzeinrichtung peripheral units and deliveries • stream delivery with pressing station -- optionales Equipment:--not included— • gate fold buckle plate Dcsdpfx Ajd E Nbqscvof

Condition: used, functionality: fully functional, Year of construction: 2016, actuation type: pneumatic, sheet thickness (max.): 3 mm, overall weight: 6,700 kg, total length: 5,700 mm, total height: 2,313 mm, input current: 400 A, type of input current: three-phase, working length: 3,200 mm, Equipment: CE marking, We are offering for sale a very well-maintained Schröder PowerBend Professional 3200/3.0. The machine is in excellent condition and is immediately ready for use. • Year of manufacture: 2016 • Working length: 3,200 mm • Usable length: 3,240 mm • Machine depth (with rear stop 1,600 mm): approx. 3,223 mm • Bending beam adjustment: up to 150 mm • Bending center adjustment: approx. ±20 mm • Machine height (with gantry): approx. 2,313 mm • Bending capacity: 3.0 mm (Rm 400 N/mm²) • Rated power: 12 kVA • Pneumatics: 6 bar • Weight: 6,700 kg • Stroke: approx. 500–540 mm • Number of bends so far: approx. 310,000 • Location: 49170 Hagen a.T.W. The control system was recently renewed and is up to date. The machine is fully operational and can be inspected by appointment. Other information: Sale as seen Dcedjytnvropfx Acvof Inspection and collection in Hagen a.T.W. by arrangement Location: Hagen a.T.W. Sale by company → without warranty or guarantee, subject to prior sale and errors.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 6197, Auction of a Thalmann THAKO folding machine! EQUIPMENT Depth stop Djdeyzhc Ajpfx Acvecf Automatic program with stored sheet metal shapes

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 15221, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, We currently offer a "Thalmann" double bending machine in excellent condition for sale. Exact designation: THALMANN – Double folding press brake – Model TD 150 – 6.4 m Series AB-SE - 6 –150 – S5 – DS 3000 / 1.50 mm (Re 275 N/mm²) DFT system The machine is in outstanding optical and technical condition and is fully operational. The machine was installed and commissioned in 2021 (year of manufacture: 2020). Reason for sale: "Simply due to low capacity utilization" by the first owner (sheet metal workshop). The machine functions perfectly and remains in active operation. Technical details: Status: 31/03/2026 Operating hours (controller): XXX Operating hours (pump): XXX Number of cutting cycles: XXX Total sheets processed: XXX Machine data: TD 150 – 6.4 m S5 with DFT® technology Working length: 6,400 mm Inserting depth: 1,250 mm Width of folding beams: 10 mm + 10 mm additional guide rail Max. bending capacity: S = 20 mm 1.50 steel sheet (Re 275 N/mm²) 180° folding capacity: 50% of the maximum bending capacity Max. bending angle: 143° (1.0 mm at 135° / 1.5 mm at 130°) Bending accuracy: +/- 0.5° (with crowning system) Number of grippers / travel path: 7 units / 15 mm - 1,250 mm Max. gripper opening: 35 mm Conical depth gauge: Multi-zone function Number of backgauge fingers / travel distance: 7 units / 5 mm - 1,150 mm Backgauge tolerance: +/- 0.1 mm per set repeat accuracy Electrical connection: 400 V / 50 Hz / 3 phase + PE Rated current / fuse / pump: 32 A / 63 A / 22 kW, 75 ccm Dimensions / weight: 8,050 x 2,250 x 2,100 mm / approx. 10,000 kg Compressed air connection: 6 bar Included additional equipment and features: - Free-running automatic shear for 1.5 mm steel: 1 unit - Curved clamping beam ratio H x D = 1:2: 1 unit - Additional gripper/backgauge finger units: 3 units Dcedpfxeyyxlxe Acvsf - Clamping beams made of high-strength HARDOX steel: 1 unit - Hydraulic material thickness adjustment: 1 unit - Automatic sheet loading and handling table: 1 unit - Automatic sheet flipping device: 1 unit - M-Guard remote maintenance support (instead of TeamViewer): 1 unit - LED bending line lighting with RGB color selection: 1 unit All information provided without guarantee – subject to errors and prior sale.

Condition: good (used), functionality: fully functional, Year of construction: 2013, Used swivel bending machine by Schroder Model: SPB Evo 3200 4.0 UD Capacity: 3200 x 4 mm Upward and downward bending Year of manufacture: 2013 POS 3000 CNC control (graphical) Hydraulic upper clamping Dcjdpfx Ajyhdz Tjcvjf CNC backgauge with 4 finger types (standard, clamping, side clamping) Additional lower blade

Condition: excellent (used), functionality: fully functional, You are bidding here on: a branded machine – bending brake from a very reputable and well-known manufacturer – Schechtl. Machine features: - Schechtl MA folding/bending brake - Bends cleanly – test available - Angle indicator Dcsdpfx Acox Ruphsvef - Bending length: slightly over 2m - Material thickness: up to 2 mm for steel sheets; for aluminium, zinc, etc., up to approx. 3 mm - Standard rail (radius rail for aluminium and zinc is available as an optional extra, as well as attachment and special rails) - Foot switch operation - Optional back gauge possible Optional: - HT 200 guillotine shear or Schröder electric guillotine shear, 2m – 2.5 mm, can also be supplied on demand Important: Optionally, you can find and purchase a wide range of machines and accessories related to sheet metal and steel processing (such as bending brakes, guillotine shears, drilling machines, roll bending machines, slitting and profiling machines – as well as accessories like beading devices, roll sets for gutter production, rear gauges, etc.), as well as hand tools and spare parts from many leading manufacturers, directly from our shop. I am always available to answer your questions. You will receive an invoice according to §25a UstG (differential taxation); VAT is included in the invoice amount. Free loading is possible – weight approx. 1650 kg. Inspection and testing can be arranged by phone and are expressly encouraged. Payment in cash upon collection. Take advantage of our experience and technical expertise – we are happy to advise you. Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction.

Condition: used, Used folding platen press Dcsdpfeymr S Rsx Acvof

Condition: good (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 262061, control type: manual, degree of automation: manual, actuation type: manual, working width: 1,000 mm, installation height: 130 mm, sheet thickness (max.): 2 mm, overall weight: 380 kg, total length: 750 mm, total width: 1,540 mm, total height: 1,265 mm, Standard equipment Patented eccentric quick-clamping system for tool change on the upper and bending beam with just one hand movement Two-stage upper beam drive for two different tool heights Gooseneck rail, 130 mm high, 30°, sharp, clearance 26 mm, foot width 41 mm, free passage 110 mm, segmented incl. corner pieces, 700 N/mm² Lower beam rail, segmented, plug-in system with corner pieces, 700 N/mm² Bending rail 15 mm, segmented incl. corner pieces, 700 N/mm² Tool segmentation for 1000 mm: 30/50/70/100/150/200/300 mm + 2 x 75 mm corner pieces, for greater lengths additionally 250 mm segments Dsdpsywfq Nefx Acvocf Upper beam stroke 110 mm Bending angle display Foot pedal mechanism for opening and closing the upper beam

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 20021, working width: 2,100 mm, bending angle (max.): 150 °, sheet thickness (max.): 3 mm, distance between stands: 2,450 mm, opening stroke: 160 mm, TECHNICAL DETAILS Sheet width: 2,100 mm Sheet thickness: 3.0 mm Frame width: 2,450 mm Opening width: 160 mm Max bending angle: 150° Backgauge - adjustable: 6.0 - 1,000 mm Control: CNC MACHINE DETAILS Total power requirement: 5.37 kW Dimensions: 3,250 x 2,450 x 2,100 mm Machine weight: approx. 3,850 kg EQUIPMENT - ERBEND 15.6" CNC control panel - Electric backgauge from 6.0 - 1,000 mm Dcjdjygw Haopfx Acvof - Material support table with ball rollers - Servo motor drive - LED machine lighting - 1x 30 upper tool - radius 1.0 mm - 1x bending rail 15 mm - 1x bending rail 25 mm - Electric safety device at the front (light curtains) - Mobile foot control - Operating manual - CE declaration SPECIAL ACCESSORIES - Divided Geifu upper tool, height = 90 mm - CNC electric motorized adjustment of lower beam - Manual crowning of the bending beam

Condition: good (used), Year of construction: 2007, control type: manual, You are bidding here on: a branded machine - folding bench, from a very reputable and well-known manufacturer - Schechtl. Device features: Dcsdpfxoytz A Es Acvef - Schechtl HA folding bench - Rail bends cleanly – test possible - Degree indicator - Bending length approx. 310 cm - Sheet thickness: 1.5 mm for steel – more for aluminum, zinc, etc., up to 2 mm - Standard rail - Foot closing device - Sheet support - Optional roller shear with rail – see photos - 2024 price list (net) – prices are now significantly higher Important! Optionally, you can find and purchase a wide range of machines and machine accessories, such as various rails, depth stops – everything related to sheet metal and steel processing – including folding benches, guillotine shears, drilling machines, slip rolls, slitting and profiling machines, accessories (beading devices, roll sets for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers in our shop. Please don't hesitate to contact me if you have any questions. You will receive an invoice in accordance with § 25a UStG – VAT is included in the invoice amount. 2024 price list – prices have already increased noticeably. Differential taxation applies. Free loading possible – weight approx. 2,000 kg. Inspection and testing are possible and welcome by prior telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise, we are happy to advise you. Collection by the buyer themselves (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Item number: folding bench HA 310.

Condition: good (used), Year of construction: 2025, working width: 3,000 mm, sheet thickness (max.): 10 mm, Description: Hydraulic folding machine – including hydraulic dynamic crowning, touchscreen, upper beam pressure regulation, backgauge (1000 mm), gooseneck tools with automatic tool clamping, electric/hydraulic adjustment of the bending beam - Images are similar - Dedpfx Acoynar Usvscf

Condition: good (used), Year of construction: 2018, working width: 3,200 mm, sheet thickness (max.): 4 mm, Hydraulic swing bending machine, incl. increased stroke of the upper beam 450 mm, swiveling upper beam, hydraulic dynamic crowning, touchscreen, pressure regulation of the upper beam, motorised rear stop (1000 mm), electric/hydraulic adjustment of the bending beam - Illustrations similar - Dsdjym U S Tspfx Acvscf