Used Foil for sale (873)

Year of construction: 1968, condition: good (used), for aluminium strip width: max. 1.050 mm strip thickness: 10 - 20 mic Nwjdpfx Adj A Dime Nob

Year of construction: 1977, condition: excellent (used), machine/vehicle number: 0392, Feeding width (mm): 500 Nodpedt Rthefx Ad Nswb Kw: 7.5 A: 380

Condition: excellent (used), Year of construction: 2007, WITH SHRINK TUNNEL & VIDEOJET Speed: max. up to 10,000 cycles/hour Nwodpfjv D If Dox Ad Njb Formats (mm): min. 105 x 148 // max. 250 x 340 Thickness: min. 2 mm, max. 25 mm Counter: 26 million Equipment / Additional information: Processing with film -PE-, PP-, OPP- and PVC-film -Foil thickness min.: 20 my -Film thickness max.: 50 my -Film overlap min.: 30 mm Machine consists of: 1x Autoloader 1x Sliding feeder (for thicker products) 6x Rotary suction feeder 1x Cavalo feeder (landscape format) 1x Welding device (lengthwise & crosswise welding) 1x Videojet addresser 1x Shrink tunnel

Year of construction: 2012, condition: like new (used), We have a Buhrs 1000 poly wrapping system available. Year 2013. You could modify this system to paper wrapping if you like. This machine is later on completed with a extra base and two extra rotary feeders Nsdpfxshid Ads Ad Njwb SYSTEM INFORMATION System brand: Buhrs Machine type: Buhrs 1000 Poly Wrapping System (max.13.000 c/h) Year: 2013 CONFIGURATION 1 Buhrs 1000 main product feeder, type shuttle feeder 1 Buhrs 1000 master base station 4 Buhrs 1000 rotary feeder 1 Buhrs 1000 module for filmpackaging with double action sealbar, max 13.000

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 02048020376, Incl. ROLL UNWINDER HUNKELER RW4-HS 7121 (M. No.: 1509697 // Age: 2004) With transfer station LCM 7084 (M. No.: 659595/2 // Age: 2001) Nedexmiqijpfx Ad Nowb

Year of construction: 2019, condition: good (used), functionality: fully functional, Die cutting, embossing and finishing machine Kama ProCut 76 with CPX Station still in production available immediately Sheet size, max. 760 x 600 mm Die cutting size, max. 743 x 585 mm Sheet format, min. 279 x 210 mm Cutting force max. 180 t Gripper margin die cutting 10 mm Speed* 5 500 sheets/h Njdpfsxzvamjx Ad Newb

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 52EHD146827, Hello, We are selling a Kluge platen press. This machine is capable of hot foil stamping, die-cutting, embossing, and debossing on paper and board up to over 3 mm thick. Maximum sheet size with automatic feeder: 356 x 559 mm Without feeder: 431 x 628 mm The machine is in perfect working condition and remains in daily production. The heating plate is new (worth €5,000). Kluge is still in operation as a company and can provide comprehensive training if needed. Nwedow Udy Nopfx Ad Njb Feel free to contact me for more information.

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Nodpfx Adex N D Tts Nswb Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Nsdpfx Aswh Tq Sjd Nswb Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Condition: excellent (used), Year of construction: 2016, Polish machine built to a high standard, full touchscreen controls. 4 lane linear pot filling and sealing line. Has been filling foil pots of pate. Perfect for pate, animal foods, meat paste etc. In nearly new condition. Nwedpfx Adehp Apde Nsb

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 0 278 06 1192, film width: 700 mm, roll diameter: 700 mm, Used Friz rotary cutter. 1 set of blades has been resharpened. The machine is used and is sold without warranty. Inspection is possible and welcome. Nodpfx Aov Radxed Newb Loading facilities available.

Condition: like new (used), inline Foilsealer and Shrinking tunnel Make: Kallfass Type: semi/automatic shrinking tunnel Modell: Mat 1606-KS1600uni Capacity: 10-15packs/min (depends on product) Frame: Steel Range: 1600(belt)x600mm (W x H) Njdpjg D Nv Tjfx Ad Nswb Dimensions: L x W x H = 4000 x 2050 x 1750mm Weight: 900Kg Electric: 380V+N+E, 65Kw Condition: As-is, working condition

Condition: reconditioned (used), Shrinking tunnel / foil wrapper Make: Kallfass Type: semi/automatic shrinking tunnel Model: Combimatic 600 Frame: steel painted Range: max. packet W x L x H = 600 x 380 x 400 mm Capacity: max. 600 packs/min Dimensions: L x W x H = 4 200 x 1 550 x 2 000 mm Weight: 850 kg Power-supply: 380 Volt - 50Hz - 23,5 kW Features: mobile water-cooled welding beam Nwodpfeg D Nyhex Ad Nsb automatic / semi-automatic 2 hand control Remark: excellent condition

Condition: good (used), Make: Kallfass Type: semi-automatic Foilwrapper /shrinking tunnel Model: Combi-simplex Frame: steel painted Range: max. pack W x L x H = 600 x 380 x 320 mm Capacity: max. 600 packs/hr Dimensions: L x W x H = 2650 x 1400 x 1650 mm Weight: 650 kg Nodpfjiaumujx Ad Njwb Power-supply: 380 Volt – 50Hz – 11,5 kW Features: mobile semi-automatic 2 hand control Remark: good condition (some minor repairs needed)

Condition: new, Year of construction: 2026, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. Nsdjff Huwepfx Ad Nswb As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 347, Stretch foil wrapping machine Nwodpoxgh Tvefx Ad Njb

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 11115, Foiling machine for PE foil for profiles Nwodpfsxght Aox Ad Nob

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Used high-performance roll garbage bag production machine for sale. Equipment: Roll lifter, longitudinal welder, folder, bottom welder, labeller. The machine is in excellent condition and can be inspected during operation. Support and spare parts are available from the manufacturer. Nsdpfx Adsx Ry Ens Nswb Technical data: - Welding width: 700 mm - Maximum bag length: 2000 mm - Minimum bag length: 380 mm - Film speed: 120 m/min - Drive type: Servo - Number of tracks: 2 Additional specifications: - Heavy-duty, automatic 2-lane roll garbage bag production machine - Film thickness: LD/LLDPE: 0.012–0.060 mm (single layer) HDPE: 0.008–0.015 mm (single layer) - Bag width: 300–700 mm - Line speed: 100–165 m/min (speed depends on material, thickness, and film quality) - Finished roll size: roll width 200–300 mm; roll diameter up to 130 mm - Power demand: 20 kW Single-line labelling machine: - Label width: 70–200 mm (1 lane) - Label length: 180–350 mm - Maximum label roll diameter: 250 mm Year of manufacture: April 2006 Components: 1. TAI-1300C Lifting unwinder 2. SSB-1300A Slitting knife, longitudinal welder 3. TA-800C1 Bag making and welding unit 4. TAF-400-2N-M 2-lane folding machine 5. TAD-700 Four-axis spindle winder Additional details: - Warranty: None - Current status: In production - Availability: Immediate

Condition: like new (used), Airpad Fromm AP502 Perfect condition, ready to work. Compact and easy to use, the Airpad AP502 produces protective padding material. No operator needed – just one button press. Njdpfewyak Aox Ad Nowb Pre-programmed programs for the production of airbags of various sizes. Changing the program by pressing a button. Weight: 228 kg Year of production 2018.

Condition: good (used), Minipack Torre Mailbag Packer The device is functional and ready for production, in very good condition. The photos show the product being sold. Produced in Italy. Manufacturer’s description: Mailbag is a digital compact system for packaging in plastic bags, ideal for packaging brochures, newspapers, books. Single-phase power supply (airless) is easy to use with mounted wheels, the system can be easily moved from one place to another with minimal fuss. A product, e.g. a magazine inserted into the feeder, initiates a photocell, detects the package and moves the film and product to the closing system. The combination of transverse and longitudinal seals closes the package and also creates a seal for the next product. The finished package gently falls into the receiving basket at the bottom of the machine. Technical data: Production speeds, depending on package and film dimensions (up to 1200 pph) Min. package width 160 mm Max. package width 250 mm Min. package length 100 mm Max. package length 360 mm Max. film thickness 30 microns Machine dimensions 600 mm x 840 mm x 1050 mm Weight 144 kg Power supply 230V Nwsdpfxowxtbrs Ad Nsb Power consumption 0.6 kW

Condition: used, Year of construction: 2017, Foil wrapping machine Sitma WM 60 Nwodpfjwhi Iyjx Ad Nob Year: 2017 The new automatic intermittent motion side seal machine is equipped with infeed conveyor, shrink tunnel and delivery conveyor Description: - Semi automatic setting - Colour monitor with touchscreen - Straight infeed - Foil unit - Shrink tunnel Specifications: Sitma WM 60 - Packaging possibilities Min./Max. Length: 100 • 420 mm. Min./Max. Width: 75 -420 mm. Min./Max Height: 1-200 mm. Min./Max width of micro-perforated single fold film: 155 • 655 mm. Max. mechanical speed: up to 3,600 cycles per hour

Condition: used, Foil wrapping machine Nsdpjtlfhyjfx Ad Nswb Clamco DEM Description: - L-sealer - Foil unit - Shrink tunnel Power supply : 220 Volt, 3 phases

Year of construction: 2000, condition: used, Foil wrapping machine OMG Autofard Year: 2000 Description: - Straight infeed Nodpfoku H Aijx Ad Nswb - Foil unit - Shrink tunnel Maximum speed 15 piles/products a minute

Condition: used, Year of construction: 2007, Foil wrapping machine Hugo Beck CWS 500 Year: 2007 Nwsdpsulixqofx Ad Nsb Description: - L-sealer Shrink tunnel

Condition: used, Die SMIPACK FP 560a ist mit Ihrer kompakte Bauweise besonders für die Verpackung von CDs, DVDs, Büchern, Bilderrahmen oder anderen kompakten Gegenständen geeignet. With its compact design, the SMIPACK FP 560a is particularly suitable for packaging CDs, DVDs, books, picture frames or other compact items. Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine SMIPACK FP 560a Baujahr / Year 2014 Schweißrahmen 560 x 430mm Produkthöhe / Product high max. 230mm Folienbreite / Foil width max 600mm Folienrollendurchmesser / Foil Roll Diameter max. 300mm Nedpexp H Udofx Ad Newb Foliendicke / Foil thickness 10-50 µm Leistung / Speed max. 600-1200 PCs/hour Maschinen Abmessungen / Machine dimensions L 2.020 x W 790 x H 1.055mm Maschinengewicht / Machine weight    148 kg Stromanschluss / Power connection     220-240 V, 50-60 Hz Nennleistung / Rated power 2.500W Nennstromstärke / Rated current 12 A Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test