Used Face Plates for sale (11,659)

Condition: used, Year of construction: 1995, sheet width 6500 mm plate thickness 3 mm back stop - adjustable 1000 mm dimensions 7300x2400x2300 mm Weight 20000 kg Rodsyyc Aujpfx Acver Equipment/accessories: - 1 x set of knives

Condition: new, functionality: fully functional, FLAIG Permanent Magnetic Chuck 300 x 150 x 51 mm, type PMSF/PMNM, with ultra-fine transverse pole division, magnetic system with neodymium magnets, fine pole spacing, removable key, maximum holding force 100 N/cm², magnetic field height 5 mm, pole plate wear allowance 6 mm, weight 19 kg, for clamping the smallest thin-walled workpieces for grinding and EDM work, ideally suited for pallet systems due to its very low dead weight. Rsdpfx Acex Tqfkover

Condition: excellent (used), Year of construction: 2019, ■ V310 plate processing machine (including 2 gantry beams of 5.500mm and side trucks) ■ This V310 plate processing machine is capable of processing plates up to 3.000mm x 34.000mm ■ X-rail (37.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table with drilling supports (3.800mm x 35.360mm, 1 pcs, suitable for ≥ 350A cutting) ■ Donaldson fume extraction unit DFPRO12 - 200L (2 pcs) ■ Gantry beam 1 ■ Position 1: VD40 drilling unit (servo driven, executed with automatic tool changer, up to 10 different tools) ■ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ■ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x-, y-, k- and v-weld preparations) ■ Driven suspension (1 pcs, servo motor driven, including laser pointer) ■ Dross inhibitor (1 pcs, including 1,2L reservoir) ■ Arc Glare protection (1 pcs) ■ Position 3: Oxy-fuel cutting torch (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ■ Voortman height control (1 pcs, capacitive height control) ■ Clamped suspension (1 pcs, clamped to position 2, with manual clamp) ■ Safety devices (light curtain, safety bumpers) Gantry beam 2 ■ Position 1: VD40 drilling unit (servo driven, executed with automatic tool changer, up to 10 different tools) ■ Driven suspension (1 pcs, servo motor driven) ■ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ■ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x-, y-, k- and v-weld preparations) ■ Driven suspension (1 pcs, servo motor driven, including laser pointer) ■ Dross inhibitor (1 pcs, including 1,2L reservoir) ■ Arc Glare protection (1 pcs) ■ Position 3: Oxy-fuel cutting torch (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ■ Voortman height control (1 pcs, capacitive height control) ■ Clamped suspension (1 pcs, clamped to position 2, with manual clamp) Rodoym Nf Iepfx Acver ■ Safety devices (light curtain, safety bumpers)

Condition: good (used), Offer consisting of: Polar 115E, year of manufacture 1995, side air tables, hydraulic lifting device on the left Rsdpsyxy U Ssfx Acvsr

Condition: new, functionality: fully functional, Year of construction: 2023, machine/vehicle number: M170-382, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (top) diameter: 170 mm, roller length: 1,600 mm, working width: 1,600 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, overall weight: 2,310 kg, total length: 3,500 mm, total width: 1,100 mm, total height: 1,130 mm, power: 55 kW (74.78 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, We are offering this hydraulic plate rolling machine Knuth KRM ST-15/6.0, brand new, year of manufacture 2023. The machine was ordered for a customer who changed their mind, so we are compelled to sell it at a promotional price. Currently, the machine is located at Knuth's headquarters in Wasbek, Germany, and has never been used. Rodpfx Acsyyd S Rsvsr If you have any further questions or need more information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1984, Available immediately from business closure: Powered four-roll plate bending machine Manufacturer: RAS Model: 44/10 Year of manufacture: 1984 Bending length: 1020 mm Material thickness: up to 4 mm Drive: 1.5 HP Weight: 800 kg Priced at EUR 1,750.-- plus VAT, ex location. Redpfoyykzrsx Acvor

Year of construction: 1984, condition: ready for operation (used), Immediately available from business closure: Motorized four-roll plate bending machine Manufacturer: RAS Model: 44/10 Year of manufacture: 1984 Bending length: 1020 mm Material thickness up to 4 mm Drive power: 1.5 HP Weight: 800 kg Price: EUR 1,750 plus VAT, ex location. Redoyyktbspfx Acvor

Condition: used, Year of construction: 2004, Lot consists of: (1) CNC Horizontal Double-Disc Surface Grinder Technical Details: Rjdpjym Tuajfx Acvsr grinding wheel diameter x width 762 x 220mm, MARPOSS E3 in-process measuring system, CNC FANUC 210i-MB, 400V 50Hz 97kW, weight approx. 13 tons

Condition: new, Year of construction: 2025, functionality: fully functional, The (fish mask shape) mask machine offered here combines efficiency and safety features with an optimized fit. These product features are, among other things, thanks to the use of ultrasonic technology, an intuitive HMI with touch screen for easy and clear operation as well as an optimized and robust unrolling unit made of steel. Process steps at a glance: Feeding of the filter fleece via a web edge control system, as well as the nose wire, uniform welding of the mask with subsequent folding and separation of the base body. The next process step deals with the attachment of the earband using ultrasonic technology. Optionally, a camera inspection, stacking unit, and a tubular bag machine can be ordered separately. In detail: - Welded unwinding unit with a total of 4 manual tensioning shafts, magnetic powder brakes and web guide control system for feeding the filter fleece. - Nose wire is fed in by means of another unwinder. - The use of panes in combination with slim aluminum profiles allows a good insight into the production while at the same time providing full protection for the operator. - We are happy to offer you various printer systems on request to print the legally required information on your mask. - The use of ultrasonic technology and the use of durable materials such as titanium guarantee increased machine availability compared to conventional materials. - High precision through the use of servo-driven motors. - Uniform material feed and material guidance, as well as separation by means of a rotary cutter with lateral marking output. Rodpfeh Uuhcjx Acvor - High-resolution, user-friendly MHI's with touchscreen. - Mask body welding using ultrasonic technology with subsequent folding matrix and welding of the upper and lower surface. - Precise separation of the mask from the marking with the help of a rotary blade, with subsequent ejection of the mask and lateral ejection of the marking. - Subsequent ear band embossing by ultrasonic technology. - Optional: Camera inspection with good and bad detection - Optional: Subsequent output to a stacker. - Optional: Output to a flowpack station for individual mask sealing. Performance data & dimensions: - Power consumption: approx. 4-5 KW during operation - Power connection: 220 V/ 50 Hz - Quantities: 80 masks/min. - Compressed air: 7-10 bar - Weight: approx. 2.5 t - Dimensions: 8200x5000x1800 mm (LxWxH) - Mask dimensions closed (longest and widest point): 205 x 82 mm (+- 2mm) We would be happy to send you an individual, high-quality offer. For this we ask you to give us your company data in advance.

Condition: excellent (used), Year of construction: 2001, control type: NC control, number of rollers: 4, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller length: 3,100 mm, working width: 8 mm, sheet thickness (max.): 8 mm, overall weight: 8,200 kg, total length: 6,200 mm, total width: 1,800 mm, total height: 3,900 mm, power: 8 kW (10.88 HP), Rolling width: 3100mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending: 8mm Rsdeygvwdspfx Acvsr Top Roll Ø: 290mm Bottom Roll Ø: 270mm Side roll Ø: 250mm Number of rolls: 4 Rolling speed: 1 - 5 Top support: yes Power: 8kW Length: 6200mm Width: 1800mm Height: 3900mm Weight: 8200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2022, condition: used, The panel swivel fix facilitates handling when moving panels from a vertical to a horizontal position. The support frame is hydraulically height-adjustable and also pivots. Support rollers facilitate horizontal movement. Four swivel casters ensure safe movement. Technical data: Support height: • Vertical approx. 340-120 mm • Horizontal approx. 1200-890 mm Max. panel size: 5200 x 2100 mm Load capacity: 250 kg Storage location: Bad Wimpfen Redpjv T Ilvefx Acvsr

Condition: good (used), Clamping plate, marking-out, welding table, welding table, straightening plate, marking-out plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1515 mm -Table height: 800 mm -Plate thickness: 130 mm -Transport dimensions: 2000/1515/H800 mm -Weight: 3250 kg Rsdpfxjxnxnmo Acvsr

Condition: used, sheet width 3355 mm plate thickness 63,5 mm roll diameter 686 mm Rjdpfx Asyuql Sscvor voltage 400 V total power requirement 150 HP weight of the machine ca. 95 t dimensions of the machine ca. 62 m

Condition: used, length 630 mm width 400 mm Granite slab 755x560x75mm measuring slab Rodpfxjyr Sl Ue Acver

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 110 mm, roller (top) diameter: 110 mm, side roll diameter: 110 mm, roller length: 1,070 mm, sheet thickness steel (max.): 4 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1070 x 4 mm – Electrically adjustable rear roll – Digital display for rear roll movement – Hardened rolls – Conical rolling – Swing-out upper roll – Brake motor – Emergency stop Rjdpfx Aceyv R T Tjvjr – Documentation – 400V

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 110 mm, roller (top) diameter: 110 mm, side roll diameter: 110 mm, roller diameter: 110 mm, roller length: 1,270 mm, sheet thickness steel (max.): 4 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1270 x 4 mm – Electrically adjustable rear roll – Digital display for rear roll movement – Hardened rolls – Conical rolling Rsdpfx Aeyv R Tajcver – Swing-out upper roll – Brake motor – Emergency stop – Documentation – 400V

Condition: used, total length: 4,500 mm, total width: 900 mm, total height: 1,650 mm, Empty weight: 3.000 kg - Documentation available: No - CE certificate present: No - Serial number: 8419012 - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 7.7 - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 3040 - Top roll diameter [mm]: 150 - Bottom roll diameter [mm]: 150 - Transport dimensions: 4500mm x 900mm x 1650mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Rjdpfx Aoyn Abfecvsr Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2016, total length: 4,400 mm, total width: 1,450 mm, total height: 1,300 mm, Empty weight: 5.200 kg Price: On request Rodpfeyn Aanex Acvor - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 210384 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 7.5 - Max. sheet thickness [mm]: 6 - Max. prebending thickness [mm]: 4 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 210 - Bottom roll diameter [mm]: 210 - Options: Cone rolling, Digital readout - Transport dimensions: 4400mm x 1450mm x 1300mm (l x w x h) - Transport weight [kg]: 5200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Scope of delivery includes: 01x Base plate, second choice Material finish: galvanized Suitable for manufacturer: Dexion Type: Speedlock S4 Frame profile: S | M | H Material thickness: approx. 3.00 mm Total width: approx. 88 mm Rsdpfjyrr Tfsx Acvor Total depth: approx. 140 mm Hole spacing (edge): approx. 38 mm Number of holes (plate): 03 pcs. Hole diameter (plate): approx. 13 mm Weight | per pc.: approx. 0.22 kg / pc. Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. If transport or shipment of this item is required, additional costs will apply. These costs depend on the delivery location and the scope of delivery and can be provided upon request.

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 6 mm rear stop 1000 mm cutting angle 0,5 - 3 ° down holder 18 Stk no. of strokes 9-17 Hub/min total power requirement 7,5 kW dimensions of the machine ca. 3800 x 2000 x 1600 mm weight 4500 kg Equipment: - electric backgauge - electric cutting angle adjustment - manual cutting gap adjustment - SP 9 control unit Rodpfx Ajyrhvvocver - Safety guard behind the machine incl. light barrier - front finger guard - 1x side stop - operating instructions

Condition: used, sheet width 2500 mm plate thickness 3,0 mm distance between columns 2550 mm Rsdpfjyv I H Dex Acvsr back stop - adjustable max. 510 mm weight of the machine ca. 1,8 t dimensions 3,3 x 1,4 x 1,8 m

Condition: used, 3-roll plate bending machine Manufacturer: Luna Model: 8266 20/25 Machine No.: 2202 Working range: 2000 x 2.5 mm sheet thickness Rsdpfoyw S N Sex Acvor Swing-out top roll Power supply: 3-phase, 16 amps

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, control type: PLC-controlled, 3-roll plate bending machine Manufacturer: FERRO S.R.L. Model: CIT - 1 Working range: 2000 x 6 mm Hydraulic swing-out bearing for workpiece change Operator control panel Rodpeyw S E Hofx Acvor Emergency stop via pull-cord

Condition: used, Year of construction: 1998, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Redpfxjyq Szme Acver Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions

Condition: used, length 630 mm width 400 mm Rsdpfx Ajyrt Dfscvsr