Used Endless Digital Printer for sale (10,264)

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Bljdpfx Aaoxz Ewnj Isn

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Bodpszhlr Esfx Aa Isln Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Canon imagePRESS V800” color production system Items for sale: 1 x Canon imagePRESS V800 with the following features: includes Fiery E500-06 includes Booklet Finisher AG1 includes Paper Deck Multi-drawer Includes Duplex ADF / R-ADF Blsdszl Sg Rspfx Aa Ijn Not the right configuration? It’s no problem to configure the machine to your specifications. Feel free to contact us! Counter readings: Total: Approx. 335,512 pages Color: Approx. 188,426 pages Black: Approx. 147,086 pages Condition: This listing is for a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment to do so! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we will record a video of a functional test for you. For more information, please feel free to contact us directly.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Canon imagePRESS V800” color production system. Items for sale: 1 x Canon imagePRESS V800 with the following features: Includes Fiery E500-06 Includes Booklet Finisher AG1 Includes Paper Deck POD Deck Lite-C1 Includes Duplex ADF / R-ADF Not the right configuration? It’s no problem to configure the machine to your specifications. Feel free to contact us! Counter readings: Total: Approx. 253,026 pages Color: Approx. 124,367 pages Black: Approx. 128,659 pages Bledpfx Aaozl Srgj Ijn Condition: This listing is for a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping available upon request! A functional test will be recorded on video for you before shipping or pickup. For more information, you are of course welcome to contact us directly

Condition: excellent (used), Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is a high-end industrial 3D printer from the FDM (Fused Deposition Modeling) series. It is used worldwide in prototyping, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: - Stratasys Fortus 450mc (3D Production System) - Krumm Tec CLEAN MATIC 3150 cleaning system for support material - Badger Magnetics 8 kVA transformer (suitable for EU power supply) The system comes from a professional environment and was used for the production of high-quality functional parts and prototypes. Key Features of the Fortus 450mc: - Industrial FDM 3D printer with large build volume: 406 × 355 × 406 mm - Capable of printing high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* - Exceptional dimensional accuracy and repeatability - Network capable, touchscreen interface, user-friendly operation - Ideal for prototyping, small series production, toolmaking, jigs and fixtures (*dependent on material licenses) Technical Data Fortus 450mc: - Voltage: 120/208 V, 3-phase (transformer for EU operation included) - Power consumption: 18 A - Dimensions approx.: 127 × 91 × 196 cm - Software version as per display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150: - Model: CM 3150 US/PS - 4 kW, 400 V, 50 Hz, 16 A - Ideal for removing SR-30 / SUP706 support material - Weight: 140 kg Total Weight approx.: 600–700 kg Important Note: "The table shown in the photos is not included in the scope of delivery." Scope of Delivery: - Stratasys Fortus 450mc - Krumm Tec CLEAN MATIC 3150 cleaning system - Badger Magnetics 8 kVA transformer Bjdpfx Aszixy Soa Ijln (Technical specifications are subject to change and errors excepted!) If you have further questions, we would be happy to answer them by phone.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. The system was last used with AlSi10Mg aluminum powder. The 3D printer has already been dismantled by the manufacturer. Dismantling and functional reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture: 08/2018 Laser operating time Laser 1 "Beam on" time: 5,165 hrs Laser 2 "Beam on" time: 5,096 hrs Laser 3 "Beam on" time: 5,023 hrs Trumpf TruPrint 5000 including Powder Bed Monitoring and Melt Pool Monitoring options Blsdpfx Aaezpvdze Ion Filter system Accessories: 2x Build cylinders 3x Dosing cylinders 1x Overflow container (used) 1x Overflow container (NEW) Manuals 4x Heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzer + Sensor (NEW) 1x Oxygen sensor (NEW) ...and much more, such as seals, etc. An Armanni CAR.Elev. pallet truck for changing containers is also in stock and can be offered as an optional extra. Get high-quality 3D components faster The TruPrint 5000—a high-productivity, semi-automated 3D printing system—prepares you for industrial serial production. With features such as optional 500°C preheating and a full-field multilaser configuration utilizing three 500-watt TRUMPF fiber lasers, you are ideally equipped for highly demanding industrial applications. The machine manufactures high-quality components from various metallic materials quickly and reliably, meeting the rigorous quality standards of tool and mold making—including via 3D printing onto preform blanks—as well as those of the aerospace and medical technology sectors. Optionally, the entire process chain—sieving, printing, cooling, and depowdering—can take place in a protective gas atmosphere. Combined with TRUMPF’s external part and powder management systems and monitoring solutions, it is ideally suited for industrial additive serial production. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. In this process, the additive component structures are built directly onto a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduced if preheating >200 °C) Processable materials[1] Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build rate[2] cm³/h 5 – 180 Layer thickness[3] μm 30 – 150 Max. laser power at workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 – 500 Min. measurable oxygen content ppm Up to

Condition: excellent (used), Printing and labeling unit, Herma GmbH, Stuttgart Type PAX Blsdpfx Ajd N Ip Hea Ion with integrated printer 230 V, 50 Hz in very good condition, directly from production!!! 2 identical printing and labeling units available.

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 398, control type: manual, degree of automation: manual, actuation type: hydraulic, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, input frequency: 50 Hz, type of input current: three-phase, overall weight: 900 kg, cutting length (max.): 150 mm, Equipment: angle stop, foot remote control, Cutting performance (90° notch) - Normal steel: 4.0 mm - Stainless steel: 3.0 mm Cutting angle: 30-120° Cutting length: 150 x 150 mm Working height: 900 mm Table: 1000 x 650 mm Motor power: 3.0 kW Blodpfxsvk I Ave Aa Isn Weight approx. 900 kg Dimensions: 1250 x 1000 x 1160 mm (LxWxH) Equipment: - Angle adjustment 30° - 120 ° continuously - 2 digital displays for the adjustable stops * Set-up stroke * Single stroke * Continuous stroke - Plexiglass protection for better transparency - Hardened blades also for cutting stainless steel - Adjustable stroke height setting - Removable cutting container - Freely movable foot switch BOSCHERT angle adjustment: - the one-piece 30° The upper blade is directly connected to both a left and a right lower blade within a tool - for each notch over 30°, the notch is made once to the left and once to the right. - the swivel adjustment is carried out pneumatically immediately after the first notch has been completed. The machine can be demonstrated on site with power on. All information is provided without guarantee. Subject to errors and prior sale.

Condition: used, Year of construction: 2018, 3D printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Bedpfx Aaevtftqe Isln Machine Opening: 450 x 180 mm

Condition: ready for operation (used), Inkjet printer for frame bending machine Length: 800mm Width: 1000mm Bodpfohzgtuox Aa Ioln Height: 1900mm Weight: about 100kg

Condition: excellent (used), Xerox / Fiery EX-P 6 controller for the Xerox Iridesse. Tested and in good working condition. All the equipment mentioned is not for sale/resale in Russia or any country subject to an EU embargo. Bodpfxexyv Nxe Aa Ieln

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included Blodpfx Aajyr Aiwo Isn 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Condition: ready for operation (used), Mitutoyo PJ300 Projector Technical data can be found in the images. Dimensions: 550 mm x 760 mm x 1080 mm Weight: approx. 110 kg You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Bodpfx Ajzxnqxoa Ioln Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Konica Minolta Accurio Press C 4070, with 1.3 million copies, fully equipped, in good condition, tested, and ready to print. Equipment: - DF 713 - UK 112 - PF 707 m - HT 506 - FS 532 m - RU 518m Bodpfjzh Hnbex Aa Isln - Fiery IC 409 - VI 515 As an experienced retailer of used copiers, we have developed a genuine expertise in packing and pallet/container shipping to guarantee that our customers receive machines in perfect condition. Our company offers the largest range of production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: ready for operation (used), Konica Minolta Accurio Press C 4070 with 1.8 million copies, fully equipped, in good condition, tested, and ready to print. Equipment: - DF 713 - UK 112 - PF 707m - HT 506 - FS 532 m - RU 518 m - HT 511 - Fiery IC 609 As an experienced retailer of used copiers, we have developed genuine expertise in packing and pallet/container shipping to guarantee that our customers receive machines in perfect condition. Blodszh Hqpepfx Aa Ien Our company offers the largest range of production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 500 h, input voltage: 230 V, input current: 15 A, input frequency: 60 Hz, We are offering this very well-maintained Z Corporation ZPrinter 650 3D printer, manufactured in 2015, for sale. Voltage: 100/115/230 V Current: 15/15/8 A Frequency: 50-60 Hz Bjdpfjzzk Ufex Aa Ioln We are a workshop for people with disabilities and are selling the printer because we no longer have the demand for the products it produces. The printer has been used very little and is therefore in very good condition. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2025, condition: used, Year: 2025 Condition: Excellent Bledpfx Aajzzynbj Ien Technical specifications: - Print width: 66 mm - Maximum book height: 350 mm - Printheads: EPSON i3200 - Print resolution: up to 1200 dpi - Printing speed: 0–40 m/min - Ink type: Water-based ink - Supported print data formats: JPG, PDF, PSD, BMP, TIFF, GIF, TGA, EPS - Supported operating systems: Windows 7, Windows 10, Windows 11 - Power consumption: 480 W - Power supply: 1-phase, 240 V, 50 Hz - Dimensions (L × W × H): 190 × 120 × 165 cm - Weight: 400 kg - ROBOJET is a printing machine designed for single-side printing on the edges of finished books. The machine features very simple and user-friendly setup. The printhead position and book transport path are adjusted automatically according to the book format. Books are transported through the machine by means of guide and transport belts. Loading and unloading of the books is performed manually. The machine is equipped with 2 EPSON i3200 printheads, offering a maximum print resolution of 1200 dpi and a print width of 66 mm. The machine achieves a production capacity of approximately 200–300 books per hour when printing on three book edges.

Condition: repair required (used), Year of construction: 2009, operating hours: 4,131 h, functionality: limited functionality, number of ink cartridges: 8, color channels: 8, number of print heads: 1, We are selling our Epson printer, which is no longer needed. It has been stored in our warehouse for a few years and was used to print photos in the garage. The print head is likely defective, and it does not recognize the cartridges on the left side, indicating that they are empty, even though they are full. Includes software and automatic paper roll feed. I did not connect it to the network, so I can only provide the number of pages printed: 4131 pages. Sold as is, with defects. We didn't use it much because we mostly print on our plotter. Inspection is possible. Bsdpfezi Svmjx Aa Isln

Condition: ready for operation (used), DECKEL FP 1 / 3 - Axis Active Digital TNC 113 -CE marking -Travel ranges X / Y / Z: 300x160x340mm -Heidenhain TNC 113 / Linear control -Spindle speed range: 40 - 2000 RPM -Feed rates continuously adjustable in all three axes -Rapid traverse in all three axes -Swiveling vertical head & drilling quill -Vertical & horizontal milling capability -Tool holder: ISO 40 -Drive power: 1.5 / 1.9 KW -Fixed angular table -Chip tray -Coolant system -Work light Bjdozvcbgjpfx Aa Ijln -Documentation Dimensions: L x W x H: 1.3 x 1.2 x 1.8 meters / Weight: 950 kg Errors and omissions excepted.

Condition: ready for operation (used), functionality: fully functional, WEISSER HEILBRONN Junior / L & Z lathe with Heidenhain digital control -Center height 220mm -Turning diameter over bed 440mm -Distance between centers 1000mm -Spindle bore approx. 50mm -Spindle speeds 40 - 2000 rpm -Automatic longitudinal / facing feeds Bedpfezwggvox Aa Ieln -Threading / Metric / Inch, etc. -Heidenhain digital display ND 780 -Forkardt F250 3-jaw chuck -Multifix base and inserts -Electric chuck guard -Follow rest -L & Z spindle cover -Work light -Documentation Dimensions: L x W x H 2.6 x 1.3 x 1.8 meters / Weight approx. 1800 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2020, number of ink cartridges: 4, color channels: 4, number of print heads: 4, counter reading (black): 309,030, counter reading (color): 506,975, Equipment: auto duplex, brochure finisher, documentation/manual, raster image processor, An authorized Canon Production partner is offering a Canon imagePress C910 (90ppm) cut-sheet digital press for sale. The printer is in excellent condition; it was originally used as a showroom device and later, in 2023, installed at a small graphic arts customer. It has now been returned to us following the completion of a contract. Configuration: - CANON ImagePress C910 main unit (90ppm license) - Multi-drawer Paper Deck-E1 - Staple Finisher W1 Pro - Paper Folding Unit-J1 (performs C/Z folds) - PRISMAsync iPR V910 print server - Stack Bypass-D1 - Stack Bypass Alignment Tray-D1 Bsdpfx Aaszrg Rdj Ieln - Duplex Color Image Reader Unit-M2 Counters: Total (All) 1,002,240 Total (Black/Large) 3,879 Total (Black/Small) 309,030 Total (Full Color+ Single Color/Large) 182,356 Total (Full Color+ Single Color/Small) 506,975 Total (Black & White / Long Sheet) 0 Total (Full Color + Single Color/Long sheet) 2 We would be happy to provide more details, including photos and videos of the device, via WhatsApp. You are welcome to inspect the printer at our facility and perform test prints. The printer is located in Riga, Latvia. We will pack it securely for worldwide shipping.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, number of ink cartridges: 4, color channels: 4, number of print heads: 4, paper weight (max.): 350 g/m², paper width (max.): 330 mm, paper height (max.): 1,300 mm, number of feeding trays: 1, counter reading (black): 68,946, counter reading (color): 584,058, year of last overhaul: 2026, Equipment: auto duplex, documentation/manual, raster image processor, An authorized Canon Production partner is selling a Canon imagePress V900 (90 pages per minute) cut-sheet digital press. The printer is in excellent condition and has been under a service contract until the present day. Configuration: - CANON ImagePress V900 main unit (90 ppm license) - Embedded Fiery Server with PS & PCL support - Fiery Impose & Compose Bundle (5-year license) - 3.5 years remaining - Duplex Color Image Reader Unit-P1 - Inline Spectro - POD Deck Lite XL-A2 - Staple Finisher-AG1 Total (Black/Large) 68,946 Total (Black/Small) 4 Total (Full Color + Single Color/Large) 584,058 Total (Full Color + Single Color/Small) 3 Total (Black & White / Long Sheet) 971 Total (Full Color + Single Color/Long Sheet) 6,687 It is possible to inspect the printer at our facility and perform test prints. The printer is located in Riga, Latvia. We will pack it securely for worldwide shipping. For further details, please do not hesitate to contact us! Bsdpfxjzpx H Eo Aa Isln

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox D110” black-and-white production system Items included: 1 x Xerox D110 with the following features: Includes Fiery EX-125 Includes RCF-1 paper deck Includes JFN-1/LFN-7 booklet finisher Not the right configuration? It’s no problem to configure the machine to your specifications. Feel free to contact us! Bedpsza Dmmofx Aa Ijln Meter readings: Total: Approx. 4,070,827 pages (black-and-white printer) Condition: This is a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for functionality A test print can be seen in the photo Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Ship-ready packaging and worldwide shipping available upon request! A functional test will be recorded on video for you prior to shipping or pickup. For more information, you are of course welcome to contact us directly.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 1,625 kg, product height (max.): 50 mm, product length (max.): 3,080 mm, product width (max.): 2,500 mm, TECHNICAL DETAILS Print Head Technology: Piezo inkjet technology with variable drop size Drop Size: 6–42 pl Ink Type: UV-curing inks Canon IJC357 or IJC358 Color Channels: 8 Standard Color Configuration: CMYK, White, Varnish, Light Cyan, and Light Magenta Maximum Media Area: max. 308 × 250 cm Maximum Printable Area: max. 309 × 251 cm Maximum Media Thickness: max. 50.8 mm Maximum Media Weight: max. 34 kg/m² Vacuum System: Independent vacuum zones for secure hold without taping Edge-to-edge printing possible RMO Specifications Maximum Roll Width: max. 220 cm Minimum Roll Width: min. 90 cm Maximum Roll Diameter: max. 24 cm Maximum Roll Weight: max. 50 kg Core Diameter: 3 inches Core Diameter approx.: 7.6 cm Speed and Productivity Maximum Throughput: max. 52.8 m²/h Production Mode: approx. 27.0 m²/h Quality Mode: approx. 19.8 m²/h MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 3,830 x 4,660 x 1,300 mm Weight: approx. 1,625 kg Power Supply: 2 × 200–240 V Frequency: 50/60 Hz Fuse Rating: 16 A Bjdpfxozy Ngdo Aa Ieln Compressed Air: 6 bar EQUIPMENT RMO for roll media UV-curing inks Canon IJC357 or IJC358 Independent vacuum zones Edge-to-edge printing function Compressed air connection for cleaning and static control

Condition: ready for operation (used), An inkjet-based industrial PolyJet/material jetting 3D printer Keyence for photopolymers is available. Build volume dimensions X/Y/Z: 297mm/210mm/200mm, resolution: 635dpi/400dpi, XY resolution: 63.5µm/40µm, layer thickness range: 15µm-30µm, machine dimensions X/Y/Z: approx. 950mm/700mm/1400mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible. Bljdpfx Ajy Anunoa Ion