Used Emergency Power System for sale (59,146)

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: Bsdpoywwrfefx Acvjda • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average power: 200 W – 5000 W Peak power: Up to 6 kW Wavelength: 10.6 micrometers Beam quality factor (M²): < 2.4 (typically 2.1 to 2.3) Beam divergence: 1.5 mrad (half-angle) Output beam diameter: 15 mm 1/e², 21 mm full beam Pulsed operation – pulse repetition rate: 0 – 2 kHz Pulse width: 250 microseconds, 70 µs resolution Bedoywwq Uspfx Acvjda Alignment stability: +/- 150 µrad Operating conditions: • Ambient temperature (max): 40 °C • Ambient temperature (min): 10 °C • Relative humidity: < 95% (non-condensing) Diode laser: • Wavelength: 635 nm • Output power: < 1 mW — 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power consumption: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20 °C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total consumption: 20 – 70 SLPH (variable) Additional requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2 °C • Depending on shutter usage

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Bdsdpfx Acoya Hvqsvja Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: good (used), axle configuration: 3 axles, first registration: 08/2016, loading space length: 13,400 mm, loading space width: 2,470 mm, loading space height: 2,540 mm, total length: 14,000 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 9,210 mm, color: white, Year of construction: 2016, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 8.830 kg Bjdpfx Ajyiyvpocvjda Carrying capacity: 33.170 kg GVW: 42.000 kg Functional Make of bodywork: VeDeCar Carrosserie Carrier Vector 1550 Cooling engine: diesel and electric (4432 operating hours diesel; 2039 electric) Maintenance, history and condition Number of owners: 1 APK (MOT): tested until 09/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, axle configuration: 3 axles, first registration: 07/2013, loading space length: 10,200 mm, loading space width: 2,500 mm, loading space height: 1,500 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,300 mm, Year of construction: 2013, Equipment: crane, Tyre size: 385/65R22,5 Suspension: air suspension Rear axle 1: Steering Drive: Wheel Empty weight: 14.070 kg Carrying capacity: 27.930 kg GVW: 42.000 kg Mast: telescopic (3 parts) Make of bodywork: PALFINGER PK 24001 Bdjdpfx Aeuc D Uajcvoa

Condition: used, functionality: fully functional, Carton Erector BE-2200 Manufacturer: Soco-System Condition: used Model/Type: BE-2200 ATS Overall length: approx. 2960 mm Overall width: approx. 1700 mm Overall height: approx. 1340/1600 mm Carton size: min. 180 L x 130 W x 100 mm H Carton size: max. 440 L x 315 W x 450 mm H Internal article number: 2026032301 The conveyor system was in operation up until dismantling. Bjdeywkbtjpfx Acveda Features: - Condition: fully functional, with signs of use - Ideal for rapid material handling - Professionally dismantled and packed - Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the high-quality workmanship of the conveyor technology, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We are happy to provide you with a customized offer or advise you on design or installation questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and our outstanding network of professionals. We have already successfully implemented projects for companies from a wide range of industries, such as logistics, the pharmaceutical industry, trades or the electronics sector. Together, we will find ways to optimize your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting technology or supplementary components such as picking racks or containers.

Condition: used, table length 2400 mm table width 1200 mm table height 200 mm bore 28 mm 100 x 100 mm material thickness ca. 24,5 - 27 mm 200 mm work height max. 850 mm Weight 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 Bdodpjyxhhyefx Acvea - Construction reinforced by ribs - incl. base basic equipment 650 mm

Condition: new, table length 2000 mm table width 1000 mm table height 300 mm bore 28 mm weight 830 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded Bdsdpfx Aceyxhhtsvoa - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures

Condition: good (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 778 F 319, Lazer Cutting Fabrikat: Prima Power Typ: Palatino 1530 Bjdpfx Ajmx Rrlscvoda Baujahr: 2012

Condition: used, machine/vehicle number: WSJPRS3277TB12670, axle configuration: 3 axles, first registration: 10/2007, total length: 13,670 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 9,000 mm, color: other, Year of construction: 2007, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 30% Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 7.920 kg Carrying capacity: 34.080 kg Bedpfx Acjyg D Hgevsda GVW: 42.000 kg Identification Registration number: OK-21-BL

Condition: used, axle configuration: 1 axle, first registration: 05/2020, loading space length: 11,150 mm, loading space width: 2,450 mm, loading space height: 2,670 mm, total length: 11,650 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2020, Equipment: ABS, tail-lift, = Additional options and accessories = - EBS - Tail lift = Remarks = Number of axles: 1, Curb weight: 5,720 kg, Gross weight: 25,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2020, Axle type: BPW, Tail lift, Tail lift type: Rear flap, Tail lift capacity: 1,500 kg, Tail lift manufacturer: B.A.R cargo lift, Tail lift material: Steel, Tail lift dimensions: 200x254, System Trailers manufacturer, Kelberg brand = Further information = Bedpfx Aswbzq Tjcvjda General information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steerable; Tyre tread left: 12 mm; Tyre tread right: 11 mm Weights Unladen weight: 5,720 kg Payload: 19,280 kg Gross vehicle weight: 25,000 kg Functional Tail lift: B.A.R cargo lift, rear flap, 1,500 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognisable quality • Good pricing • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registrations are processed quickly • Expert technical services • The security of 'recognisable quality' • And more.... Please visit our website for special offers and our complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an enquiry via our website. Ask directly for our European warranty package.

Condition: used, axle configuration: 1 axle, first registration: 05/2020, loading space length: 11,150 mm, loading space width: 2,450 mm, loading space height: 2,670 mm, total length: 11,650 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2020, Equipment: ABS, tail-lift, = Other Options and Accessories = - EBS - Tail lift = Remarks = Number of axles: 1, Curb weight: 5,700 kg, Gross weight: 25,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2020, Axle type: BPW, Tail lift, Tail lift type: Rear flap, Tail lift capacity: 1,500 kg, Tail lift manufacturer: cargo lift, Tail lift material: Steel, System Trailers manufacturing, Kelberg brand = Further Information = General Information Cabin: Day License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steered; Tyre tread left: 12 mm; Tyre tread right: 11 mm Bdodpfx Acewbzqmjvsa Weights Unladen weight: 5,700 kg Payload: 19,300 kg Gross vehicle weight (GVW): 25,000 kg Functionality Tail lift: cargo lift, rear flap, 1,500 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing selection • Recognizable quality • Good prices • Correct business practice • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates quickly arranged • Professional technical services • The security of "recognizable quality" • And more…. Please visit our website for special offers and our complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask us directly about our European warranty packages.

Condition: good (used), Year of construction: 1992, working width: 1,300 mm, Double-sided glue applicator / 2-roller glue applicator Manufacturer: AMOD / Bürkle Type CDL 1300 Suitable for double-sided glue application Working width 1300 mm With 2 new galvanized dosing bars Bdjdsv Sa Utopfx Acvsa Operating voltage 380 V 2-phase 50 Hz Control voltage 220 V Rated current 1 A Fuse protection 16 A (provided by customer) Including 2 additional glue rollers / good visual condition The machine will be technically inspected and cleaned upon order.

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,610 kg, fuel type: diesel, color: yellow, power: 100 kW (135.96 HP), output current: 180 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 100 kW (135.96 HP), nominal power (apparent): 125 kVA, continuous power: 100 kW (135.96 HP), continuous power (apparent): 125 kVA, total length: 2,900 mm, total width: 1,150 mm, total height: 1,600 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei EURO 5, type of cooling: water, emission class: euro5, Equipment: AdBlue, HELVETICA POWER offers: 125 KVA generator with 100% copper alternator, digital control, and ATS unit for emergency power operation. Remote control is built-in. With Oil- and water Heater. CE-certified Yunnei Stage V diesel engine suitable and approved for continuous operation in accordance with applicable emissions standards. Stamford type: CE-certified quality brushless synchronous alternator with 100% copper winding! Bdjdpoyvktajfx Acvea Delivery (surcharge) possible worldwide. Optional: Looking for something else? More or less kW, a different engine (Cummins, Deutz, Volvo, etc.), a larger tank, an additional tank - contact us. We can also customize your generator. Pickup: from our warehouse in Konstanz (Germany) or Kefikon (Thurgau). Delivery is available. Worldwide delivery is possible. Dealer inquiries welcome - please contact us. We have various emergency power generators (from 7 kW to 100 kW) available from stock in Switzerland and Germany. We also have various power generators with STAGEV engines in various sizes available from stock in Switzerland and Germany.

Condition: new, Year of construction: 2025, functionality: fully functional, type of cooling: air, total width: 540 mm, total length: 920 mm, total height: 760 mm, fuel: diesel, overall weight: 159 kg, continuous power (apparent): 9 kVA, continuous power: 7 kW (9.52 HP), rotational speed (max.): 3,000 rpm, warranty duration: 12 months, noise level: 71 dB, power: 8 kW (10.88 HP), nominal power: 7.7 kW (10.47 HP), nominal power (apparent): 9 kVA, fuel type: diesel, color: yellow, output voltage: 400 V, output current: 13 A, output frequency: 50 Hz, type of output current: three-phase, Electric starter generator. The generator is available from stock in Kefikon (Switzerland) and Konstanz (Germany). Other models in various sizes (10 kW, 15 kW, 20 kW, and up to 100 kW) are available from stock, including those with STAGEV engines. Service available in Switzerland and throughout Europe. Bdjdpfjmu N Tksx Acvja Pickup. Delivery worldwide possible. Dealer inquiries welcome – contact us!

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,100 kg, fuel type: diesel, color: yellow, power: 30 kW (40.79 HP), output current: 54 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 30 kW (40.79 HP), nominal power (apparent): 38 kVA, continuous power: 30 kW (40.79 HP), continuous power (apparent): 38 kVA, total length: 2,110 mm, total width: 1,000 mm, total height: 1,350 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei STAGEV, type of cooling: water, HELVETICA POWER offers: 30 KW 38 KVA Generator / Diesel Generator ⭐️ Stage V (EU) / Euro 5 compliant – suitable and approved according to current European emission standards. ⭐️ Oil-tight chassis, ideal for construction sites, industry, agriculture, and many other applications. ⭐️ CE-compliant in accordance with applicable regulations ⭐️ Sound-insulated (Super Silent) design Bdsdpfx Aswbkkpecvea ⭐️ Equipped with emergency power switch / ATS (Automatic Transfer Switch) unit for backup power operation ⭐️ Digital control panel plus integrated remote control ⭐️ Yunnei Stage V diesel engine designed for continuous operation ⭐️ Stamford type (licensed CN): CE-certified high-quality brushless synchronous alternator with 100% copper winding ⭐️ AVR system (automatic voltage regulation dependent on load) ⭐️ The generator is delivered with a practical, heavy-duty yellow tarpaulin truck cover Warranty / Guarantee / Service ⭐️ One-year factory warranty! ⭐️ Optional: up to 2-year extended warranty, significantly exceeding industry standards (extendable upon request). ⭐️ Our insurance partner: Allianz Suisse / Allianz Germany (for Europe) ⭐️ Service available throughout Switzerland and Europe. Payment / Delivery ⭐️ Payment: due at purchase. ⭐️ Delivery available throughout mainland Europe for an additional charge. 🚚 Pickup: from our warehouses in Kefikon (TG, Switzerland) or Konstanz (Germany) 🚚 Worldwide delivery upon request 👍 Dealer inquiries welcome – contact us! ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ More Models & Configurations ⭐️ Other power ratings available (approx. 7 kW to 100 kW) ⭐️ Stage V (EU) / Euro 5 compliant versions ⭐️ Alternative engine options available (e.g. Cummins, Deutz, Volvo) ⭐️ Optional features: larger tank, auxiliary tank, tank and water heating ⭐️ Many versions available from stock in CH / DE. ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ Keywords: power generator, generator, emergency generator, backup generator, power unit, energy generator, power supply unit, standby power unit, emergency power supply, NEA, backup power, replacement power, backup power supply, power supply, power source, autonomous power supply, off-grid operation, site power, construction site generator, event power, camping power, outdoor power supply, diesel generator, petrol generator, gas generator, inverter generator, synchronous generator, asynchronous generator, three-phase generator, single-phase generator, 230V generator, 400V generator, high-voltage generator, small generator, industrial generator, professional generator, high-performance generator, silent generator, super silent generator, sound-insulated generator, mobile generator, portable generator, stationary generator, home backup power, commercial power, industrial power, agricultural generator, construction equipment, workshop power, server backup, PV backup, hybrid generator, ATS, automatic transfer switch, power distributor, CEE generator, high-voltage connection, generator with AVR, voltage regulator, power maker, power device, backup power device, diesel power unit, construction site power unit, 22KW 28KVA 30KW 38KVA 34KW 43KVA 44KW 55KVA 19KVA 15KW 38KVA 30KW 63KVA 50KW 125KVA 100KW 100KVA 80KW

Year of construction: 2008, condition: ready for operation (used), This Finn-Power LP 8 turret punch press was manufactured in 2008. It features a maximum punching force of 30 tons and a punching working area of 1500 × 3000 mm. The machine includes a threading/tapping unit capable of mounting 6 taps up to M8 and a versatile tool turret. Consider the opportunity to buy this Finn-Power LP 8 turret punch press. Contact us for further details. • Max punching force: 30 tons Bodpfx Aoyh I Ibecveda • Max sheet loading size: 1500 × 4000 mm • Max sheet unloading size: 1500 × 4000 mm • Punching working area: 1500 × 3000 mm • Laser working area: 1500 × 2500 mm • Threading/tapping unit in turret: up to 6 taps, max M8 • Tool turret configuration: • 1 × Multitool 8/24 • 2 × Multitool 8/16 • 5 index stations • 1 forming station for forming operations • Unloading flaps: 2 for single parts (front and side)

Condition: ready for operation (used), Year of construction: 2023, This Prima Power Laser Genius + 1530 was manufactured in 2023. It features an 8kw laser with chiller, open cabins on both sides, safety glasses on doors, and a high-capacity dust collector. It includes advanced cutting technologies like NIGHT Cut, SMART Cut, and MAX Cut, plus an ATC automatic tip changer with 20 nozzle stations. Consider the opportunity to buy this Prima Power Laser Genius + 1530 fiber laser cutting machine. Contact us for more information. Additional equipment • Laser with 8kw and chiller • Open Cabin with right and left side accessible doors • Safety glasses on the doors • NIGHT Cut for safer cutting and piercing process • SMART Cut for faster processing of thin material • MAX Cut for piercing process time reduction for thick material • Gas Mixer Cut • Nozzle check and OPC by camera • Adaptive cut Bdodpfjx D Ebrex Acvoa • ATC automatic tip changer with 20 nozzle stations Machine Benefits Technical Machine Benefits • Dust collector for high production (3200m3/h) with 6 cartridges • Automatic selector for additional cutting gas • Uninterruptible power supply (ups) • Fleet manager remote care via tosibox • Interface to nt or automation connection • Interface for psr 2d Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2007, punching force: 31 t, total height: 2,200 mm, total width: 5,165 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D CNC, product length (max.): 5,570 mm, number of axes: 2, This 3s Finn-Power C5 + Compact Express CNC punching machine was manufactured in 2007. It features a working area of 2500 × 1250 mm and a punching force of 30 tonnes. With 20 tool stations and a maximum tool diameter of ~89 mm, it offers efficient operation. Consider the opportunity to buy this Finn-Power C5 + Compact Express CNC punching machine. Contact us for further details. • Maximum sheet thickness (steel): 8 mm • Number of tool stations: 20 • Maximum tool diameter: ~89 mm • Table clamps: 3 (typically pneumatic) • Sheet weight capacity: ~200 kg • Traverse speeds: X ~90 m/min; Y ~60 m/min • Table support: vacuum or brush table Additional equipment • Automatic loading/unloading system (automatic material handling, loaders/unloaders) Bedpfx Aoyiz Igocveda • Chip/slug conveyor belt

Condition: ready for operation (used), Year of construction: 1996, operating hours: 22,000 h, overall weight: 12,000 kg, total height: 2,200 mm, punching force: 31 t, number of axes: 3, This 3-axis Finn-Power Shear Genius TRS 6 SBU was manufactured in 1996, featuring a punching force of 300 kN and a sheet working range of 2500 mm × 1250 mm. It supports up to 21 tool stations and can handle sheet thicknesses up to 6 mm. Automatic tool change system enhances productivity. Consider the opportunity to buy this Finn-Power Shear Genius TRS 6 SBU punching and bending machine. Contact us for more information. Machine Benefits Technical Machine Benefits Bdedpfxsyaqnqo Acvoa • Max material thickness: approx. 6 mm (mild steel) • Sheet working range: approx. 2500 mm x 1250 mm (without repositioning) • Positioning accuracy: ±0. 1 mm • Tool stations: up to 21 • Indexable tool stations: yes • Tool change system: automatic Extra Information Machine still under power Dimensions Machine Depth 5500 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 18,924 h, laser power: 3,000 W, travel distance Z-axis: 150 mm, overall weight: 11,000 kg, number of axes: 3, This 3-axis Prima Power Platino 1530 was manufactured in 2017. It features a 3 kW CO₂ laser, a working area of 3000 × 1500 mm, and can handle mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. It includes an automatic pallet changer and a CNC Touch Interface. If you are looking to get high-quality laser cutting capabilities, consider the Prima Power Platino 1530 machine we have for sale. Contact us for more information. • Working area (X × Y): 3000 × 1500 mm • Positioning accuracy: ±0.05 mm • Repeatability: ±0.03 mm • Drive system: CNC-controlled with brushless servo motors • Control unit: Prima Power CNC Touch Interface • Cooling: Water-cooled • Fume extraction system: Integrated • Total operating hours: 18,924 h Bdedpfx Aex D Nyxjcvea Additional equipment • Automatic pallet changer

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,003 h, This Finn-Power TRS 6 SUV was manufactured in 2003. A robust CNC punching and shearing machine, it features a punching force of 300kN and shearing force of 250kN. It includes a turret with 20 tool positions and optional a sheet metal storage capable of handling 40 pallets. Ideal for high-quality punching capabilities. Contact us for more information. Bodpfxox D H Dbj Acvsda Additional information • Punching Force: 300 kN • Shearing Force: 250 kN • Various spare parts • Weight: 22000 kg • Optional: Sheet Metal Storage: 40 pallets, 3000 x 1500 x 150 mm

Condition: good (used), axle configuration: 1 axle, first registration: 08/2020, loading space length: 10,000 mm, loading space width: 2,490 mm, loading space height: 2,670 mm, total length: 10,550 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275/70R22,5, wheelbase: 6,300 mm, color: blue, Year of construction: 2020, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 1, dual tires, payload: 19,250 kg, curb weight: 5,750 kg, gross weight: 25,000 kg, chassis type: complete chassis, chassis material: steel, kingpin size: 2 inch, suspension type: full air suspension, color: blue, ABS, EBS, axle type: BPW, tail lift, tail lift type: rear liftgate, tail lift capacity: 2,500 kg, tail lift manufacturer: Zepro, tail lift material: steel, tail lift dimensions: 250x200, System Trailers manufacture, Kelberg brand = Additional Information = General information Cab: Day Registration number: OV-25-YB Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tire size: 275/70R22.5 Brakes: Drum brakes Bdsdpfx Acev U T Rgjvoa Suspension: Air suspension Axle 1: Double tires; steered; tire tread left inner: 8 mm; tire tread left outer: 8 mm; tire tread right inner: 8 mm; tire tread right outer: 12 mm Weights Unladen weight: 5,750 kg Payload: 19,250 kg gross permitted weight: 25,000 kg Functional Tail lift: Zepro, rear liftgate, 2,500 kg Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offering covers all European brands, years of manufacture, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good prices • Professional business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of "recognizable quality" • And more… Please visit our website for special offers and the full inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 1975, filling amount ca. 250 l basket dimensions 560 x 260 x 40 mm dimensions of the machine ca. 1,25 x 0,70 x 1,20 m SYSTEM CHEMIE - T 50 Dive Wash Unit - Immersion Tank Dimensions: 585 x 385 x 500 mm Bodpfoym D Ahex Acvjda - Draining Area Dimensions: 400 x 375 mm - 2x Storage Rack Dimensions: 400 x 350 x 210 mm

Condition: like new (used), For sale is a used Record Power band saw BS 300 E with a cutting width of 305 mm. Bodpsyx Dalefx Acvsda The saw is in nearly new condition and has been reconditioned and inspected by our professional staff. (Fully functional) Technical data: - Cutting height: 190 mm - Cutting width: 305 mm - Saw blade length: 2370 mm - Blade width: 8-15 mm - Table tiltable 90-45° - Includes base with wheels The band saw is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: band saw, saws, saw, band Reference: R-AT0EF