Used Emco Mat for sale (142)

Condition: good (used), Year of construction: 1996, Milling machine, universal milling machine, tool milling machine, drilling and milling machine -Manufacturer: EMCO, milling machine with digital display and hydraulic clamping -Clamping table: 800 x 400 mm -Clamping table: rotatable/tiltable/swivelable -Travel range X/Y/Z: 600/400/400 mm -Spindle mount: SK40 with hydraulic clamping Accessories: incl. 9 tool holders (see photos) -Speeds: from 63 - 3150 rpm -Feed rate X/Y: 16-800 mm/min -Feed Z: 8-400 mm/min -Quick stroke: 100 mm -Rapid traverse X/Y: 2000 mm/min -Rapid traverse Z: 1000 mm/min -Coolant system: yes Nkjdpfsxvraxjx Adtet -Dimensions: 1740/1670/H1940 mm -Weight: 2200 kg

Condition: like new (used), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, spindle speed (max.): 15,000 rpm, MMV 4200 GANTRY-TYPE MACHINING CENTER FOR 5-AXIS SIMULTANEOUS MACHINING WITH HEIDENHAIN TNC 640 5-axis simultaneous gantry-type machining center with integrated water-cooled motor spindle. Control: HEIDENHAIN TNC 640 • Conversational programming • USB and Ethernet interface • 24" TFT color monitor • 3D visualization, programming graphics Spindle: Water-cooled motor spindle Spindle power: 46 kW Spindle speed: 50 - 15,000 rpm Spindle torque: 170 Nm Tool holder: ISO 40 DIN 69871 Pull stud: ISO7388/2 Type B (not included in the basic version) Travel: X = 4200 mm, Y = 1000 mm, Z = 950 mm Distance spindle nose to table: 0-950 mm Rapid traverse (X-Y-Z): 60/50/50 m/min Nksdoychf Sjpfx Adtet B/C axis: 50/100 rpm Fixed table: Cast iron table with T-slots Number - width - spacing: 7 - 18 mm - 125 mm (central alignment slot 18H8) Clamping surface: 4400 x 1050 mm Maximum table load: 6000 kg (evenly distributed) Swivel head (B axis): Torque motor, swivel range +120°/-120° Rotary table (C axis): Torque motor, table diameter 900 mm Maximum table load: 2000 kg Rotary table accuracy: 0.05 mm +/-0.02 mm, recessed under the fixed table Stationary tool changer: Drum magazine on the left side of the machine with 40 tool stations Tool change time (chip-to-chip, VDI2852): approx. 15s Coolant pump: Pressure 6 bar, delivery rate 40 l/min (nominal at pump) Work area lighting: 4 LED lamps Standard equipment: • Linear glass scales in X/Y/Z axes • Central lubrication with grease • Handwheel • Alarm lamp • Work area lighting • Electrical cabinet air conditioner

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control Very Good CONDITION CE-Compliant!! Technical Data: >> Year of manufacture: 2008 Machine No. BA1DW2501 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Max. load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed: 10–2000 mm/min Rapid traverse X: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight approx. 2000 kg >> Dimensions approx.: 2.5 x 2 x 2 m Nkjdpfowxxdfjx Adtjt >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head with tailstock >> Counterholder >> Röhm machine vice About the machine: For sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a government facility where it was only used occasionally. The control system is very user-friendly. Furthermore, the machine is equipped with hydraulic clamping in both vertical and horizontal modes. Switching from vertical to horizontal operation is very simple by folding away the vertical head. The Emco has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the machine under power at our location.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control, Excellent Condition, CE Compliant! Technical Data: >> Year of manufacture: 2008 Machine No.: BA1DW2503 >> Milling table clamping surface: 800 x 400 mm Nkjdpfewxxd Eex Adtet Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rate: 10–2000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical quill and horizontal spindle – ISO 40 (SK40) >> Hydraulic pull-in system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (LxWxH): approx. 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged enclosure >> Coolant system >> Machine lamp >> Indexing/Dividing attachment with tailstock >> Steady rest >> Röhm machine vice About the machine: Offered for sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a governmental facility where it saw only limited use. The control unit is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal setup is very straightforward by simply swinging away the vertical head. The Emco has been both mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power at our location.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal Tool Milling Machine Emco Emcomat FB-450 Linear with Position Indicator – Near-Mint Condition, CE-Compliant!! Technical Data: >> Year of manufacture: 2013 | Machine No.: F9A124962 >> Milling table clamping surface: 800 x 400 mm T-slots: 8 Slot width: 14 H8 Slot spacing: 50 mm Maximum load: 150 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rates: 10–5000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical and horizontal quill – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (LxWxH): approx. 2.5 x 2 x 2 m Njdpfx Adswycv Ietjkt >> Main drive motor: 10 kW >> Spindle brake >> Technical documentation, spare parts plans, operating manual included >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head >> Rotary table >> Machine vice >> Steady rest About the Machine: For sale is a Universal Tool Milling Machine Emco Emcomat FB-450 Linear with position display, in near-mint condition. The machine comes from a government operation and was used only occasionally for training purposes. The control system is very user-friendly. Additionally, the machine features hydraulic clamping in both vertical and horizontal operation. Conversion from vertical to horizontal mode is very simple due to the tilting vertical head. The Emco has been mechanically and electrically tested in our workshop. Take advantage of the opportunity to inspect and test the machine under power at our facility.

Condition: good (used), Year of construction: 2004, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 100 mm, Universal Tool Milling Machine V/H Manufacturer: Emco Model: FB-4 Year of manufacture: 2004 Control: Heidenhain ND-760 display Technical specifications: ----- • Travel X-Y-Z: 450 x 300 x 350 mm • Clamping surface: 800 x 400 mm • Tool holder: SK-40 • Quill stroke: 100 mm • Milling head swivels ± 90° • Spindle: 50 – 2,500 rpm • Speed selection: 18 steps • Electric central lubrication • Machine lamp Njdpfjx Tzk Rex Adtokt • Coolant system • Splash guard enclosure (foldable) • Weight: 1,550 kg • Dimensions LxWxH in mm: 1,485 x 1,500 x 1,700 mm Accessories: ----- • 4x machine leveling feet • Operating manual • Clamping wrench • Counter bearing for horizontal machining • Shaft set for horizontal machining • Table enclosure (currently removed) Two identical machines available, both serviced and partially overhauled in Q4-2025.

Condition: excellent (used), Year of construction: 2006, HYPERTURN 665 MCplus - Y Multi-axis CNC turning center for complete machining of turn-milled components, featuring integrated spindle motors (ISM) on both main and counter spindles, equipped with a thermo-compensation system (liquid-cooled). Drive power: Main spindle: 29 kW Counter spindle: 22 kW Speed range: Main spindle: 0–5000 rpm Counter spindle: 0–7000 rpm Spindle interface (DIN 55026): Main spindle KK6 (max. bar passage 65 mm) Counter spindle KK6 Y-axis: travel range +/- 50 mm The Y-axis is engineered so that resultant cutting forces are distributed over two axes, ensuring exceptional rigidity for all machining operations. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D CNC control. Includes: * Hollow clamping cylinder incl. draw tube * Parts ejector and flushing through the counter spindle * 2 x 12-position tool turrets, VDI 30, radial with direction logic for up to 2 x 12 driven tool stations! Swivel speed adjustable via feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0–5000 rpm - C-axis for both main and counter spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished components * Sinumerik 840D * Chip conveyor with programmable discharge height of 1200 mm (type "hinged belt") * Coolant unit integrated into chip conveyor 2 pcs. high-pressure pumps, 14 bar 2 pcs. flushing pumps, 3.7 bar * Control cabinet air conditioning * Electrostatic oil mist separator * Hydraulic unit * Machine lighting * Documentation IMPORTANT: Export/re-export outside the EU is subject to export license requirements. Nkjdpfjyc Sa Hex Adtot Year of manufacture: 2006 Includes bar feeder High-pressure pump for both tool turrets. Chip flushing for both main and counter spindles. The tool turret for the counter spindle is as new, replaced approx. 2 years ago. Both turrets: 12 x VDI 30 AWZ

Condition: excellent (used), Manufacturer, Emco. Machine type, Hyperturn 665 CNC lathe. Inventory number, 22281. Machine designation, Drehmaschine Emco Hyperturn 665. Machine number, serial number R7A Q 2701. Year of manufacture, 2002. Control system, Siemens Sinumerik 840D with PCU 50 V1. Programming, DIN ISO, Siemens ShopTurn capable. Axes configuration, X axis and Z axis. Max turning diameter over bed, approx. 665 mm. Max turning diameter over cross slide, approx. 500 mm. Max turning length, approx. 1,000 mm. Swing diameter, approx. 665 mm. Main spindle. Spindle speed range, up to approx. 4,000 rpm. Spindle nose, DIN standard spindle interface. Spindle motor power, approx. 30 kW. Spindle torque, high torque for soft turning applications. Tool system. Tool turret, CNC controlled turret. Number of tool stations, typically 12 positions. Tool holder type, VDI standard. Live tooling, not included, soft turning configuration. Tailstock, CNC controlled tailstock. Quill diameter, approx. 100 mm. Quill travel, approx. 120 mm. Coolant system, included. Chip conveyor, included. Machine accuracy. Positioning accuracy, approx. 0.01 mm. Repeatability, approx. 0.005 mm. Electrical supply data. Supply voltage, 400 V. Frequency, 50 Hz. Rated current, 110.00 A. Backup fuse, 125.00 A. Nkedpfx Adjx S Hghjtst Connected load, 56.00 kW. Compressed air requirement, approx. 6 bar. Machine dimensions. Machine length, approx. 4,500 mm. Machine width, approx. 2,200 mm. Machine height, approx. 2,100 mm. Machine weight, approx. 8,000 to 9,000 kg depending on configuration. Application, precision soft turning of steel, aluminum, and non hardened materials.

Condition: like new (used), Year of construction: 2018, Technical Data: • Swing diameter over cross slide: 430 mm (max. turning diameter 220 mm) • Turning length: max. 670 mm Nsdpowl Uu Hsfx Adtjkt • Spindle bore (clearance diameter): 45 mm • HS spindle interface DIN 55026 A2-5 • Main drive power: 13 kW • Max. torque: 78 (100) Nm • Speed range: 0–6300 rpm • Counter spindle interface: DIN 55026 A2-4 • Number of tools: 12 driven tools, max. speed: 0–6000 rpm • Tool holder: VDI 25 • Pressure boost station E45 for central coolant system; centrifugal pump 14 bar; lifting pump min. 1.5 bar • Chip conveyor: hinge belt conveyor, discharge height 1200 mm • Swing loader Emcoturn E45 with loading and unloading system; 2-finger parallel gripper / 90° rotating module • Belt conveyor for RT parts feeding: length 1300 mm / width 567 mm; chain pitch 27.1 mm (1800L) • Control: Siemens 828 D ⸻ • Connected load: approx. 46 kVA • Voltage: 400 V / 50 Hz • Weight: approx. 4,300 kg • Space requirement: approx. 15 m²

Condition: like new (used), Year of construction: 2005, operating hours: 1,500 h, functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 510 mm, turning diameter: 430 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, rotational speed (max.): 6,300 rpm, type of input current: three-phase, overall weight: 2,800 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in very good condition and immediately ready for use. The machine comes complete with various tools and driven tools, both axial and radial. Software: Sinumerik 810D/840D Turning. Nkodpfsx Rqd Ijx Adtet Full documentation is available and included.

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840Dsl Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axzug Gr. 65 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Nkodsw Tg Adspfx Adtjt Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Mechanical extraction, Absolent Toolholder:Misc. static and driven toolholder Further Accessory:Spindlechiller

Condition: good (used), Year of construction: 2006, Machine used only for plastic. Technical details shown in attached pdf document. Parts shown by hand not come. Nkedpfx Adeu Ibihetet

Condition: good (used), Year of construction: 1999, EMCO PC MILL 125 CNC Machining Center Siemens Sinumerik Brand: EMCO Model: PC MILL 125 Serial No.: F1D V00 Year: 1999 Control: Siemens Sinumerik 810M Technical Features: Travels (X, Y, Z): 185, 125, 200 mm Vertical travel (Z-axis): 100 mm Distance between headstock and table surface: 95-195 mm Njdpjv S Tx Ejfx Adtokt Table: 420 x 125 mm Maximum load on table: 10 kg Spindle bearing: Diameter 40 mm Taper: SK30 Tool clamping: Automatic Motor speed: 5000 rpm Speed range: 150-5000 rpm Maximum cutter diameter: 25 mm Accuracy: 0.00125 mm Number of tool stations: 10 Maximum tool diameter: 55 mm Maximum tool weight: 700 g Dimensions: 1730 x 875 x 1892 mm Weight: 570 kg All machine and numerical control manuals are included.

Condition: used, Year of construction: 2000, Technical details: Njdpjx Dcgxsfx Adtekt turning diameter: 360 mm turning length: 520 mm total power requirement: 20 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 3 x 2 x 2 m

Condition: used, Year of construction: 2001, Technical details: Nkodpfx Asx Aq Hkjdtot turning diameter: 220 mm turning length: 700 / 665 mm total power requirement: 17 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 2,63 x 1,98 x 1,94 m greates pass round over bed: 430 mm Part length max.: 510 slide travel radial ( X-axis ): 160 mm bore diameter: 45 mm

Condition: used, Year of construction: 2007, Technical details: turning diameter: 220 mm turning length: 310 mm total power requirement: 17 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,25 x 1,63 x 1940 m greates pass round over bed: 430 mm bore diameter: 45 mm centre distance: 687 mm slide travel radial ( X-axis ): 160 mm slide travel axial ( Z-axis ): 310 mm spindle turning speed range: 0-6.300 U/min Nkjdpfx Adjx Aq Hwetjt

Condition: excellent (used), Year of construction: 2017, Heidenhain TNC 620 control Travel X/Y/Z: 350 x 250 x 300 mm Spindle speed: 12,000 rpm Nksdpfxex Rpahs Adtjt Rotary and swivel table Tool magazine for 50 tools, ISO 30 Chip conveyor LANG Automation

Condition: good (used), Hardness testing device Type: M5U 300-030 Manufacturer: emco Nedpfsx U Dprox Adtokt Condition: used, good, without warranty

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 260 mm turning length: 610 mm facing movement (x-axis): 160 mm longitudinal traverse (z-axis): 610 mm control: Siemens 810D revolution per minute: 1 - 6300 steples U/min max. torque on the spindle: 86 Nm spindle passage: Ø 42 mm external spindle dia. in forward position: Ø 80 mm feed motor: X/Z: 5000 / 7000 N rapid motion - x-axis: X/Z: 16 / 20 m/min tool turret - number of stations: 12 / VDI 30 tailstock taper ISO: MK4 tailstock adjustment: 500 (Hub) mm Main spindle capacity: 7,5 (100%=11kW) kW electrics - voltage/frequency: 3/PE ~ 400V und 50/60Hz V/Hz total power requirement: 20 kVA (11 kW) Weight approx.: 4,0 t dimension machine xH: 3,0 x 2,0 x 2,1 m Further technical specifications: Nkjdpfx Aeu Ixwiedtot C-axis Distance main spindle - tailstock: 805 mm Power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Coolant device, coolant supply via tool turret Switch cabinet with cooling, Rittal type SK3393100 Workpiece collecting tray Machine lighting Accessories: 1x driven tool i.D. *

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. Nkedpou N Avxsfx Adtet The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler Njdpfxsvvtpxj Adtokt With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *

Condition: used, Year of construction: 1990, Technical details: Nkodpfx Adovc Awrjtot x-travel: 185 mm y-travel: 95 mm z-travel: 200 mm control: emco tronic TM02 spindle taper: SK 30 range of revolution per miute: 10 - 4000 / steples U/min feed continuous: 1 - 2000 / steples mm/min. rapid traverse: ca. 3,0 m/min tool turret - number of stations: 10 interface: R 232 table surface area: ca. 420 x 125 mm total power requirement: 0,8 kW machine dimensions LxWxH: 2,1 x 0,9 x 2,0 m EMCOTRONIC TM 02 control panel Operating modes: Manual operation (manual) and/or automatic Coolant system (with feed to the milling spindle) Operation via control panel standing on 3 swivel wheels Pneumatic door protection *

Condition: used, Year of construction: 1995, Technical details: x-travel: 600 mm Nkodevbhcdspfx Adtst y-travel: 400 mm z-travel: 400 mm table surface area: 800 x 400 mm range of revolution per miute: 63 - 3150 / 18 step U/min feed continuous: X/Y/Z: 8 - 800 / 8step mm/min. spindle taper: SK 4 spindle head swivable left - right: 90 ° quill stroke: 105 mm total power requirement: 5,3 kW weight of the machine ca.: 2245 kg machine dimensions LxWxH: 2,1 x 2,8 x 1,9 m Control screen replaced with new LCD. The milling machine is equipped with measuring system with digital display PROTOTRAK MX2. The X and Y axes can run cycles. (interpolation), the Z-axis is moved manually. Spindle with right/left travel Automatic tool clamping via control command Coolant device (without container) Chip collection tray Tool accessories (comparable in the photo) *

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: F4N K5 105, Emco FB5; year of manufacture 1997; accessories: sub-spindle head + approx. 10 pcs SK 40 tool holders; Prototrac control Nodpfx Adjyctq Hetskt

Condition: ready for operation (used), Year of construction: 2019, operating hours: 16,296 h, functionality: fully functional, machine/vehicle number: R9B190201, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 50 mm, bar passage: 77 mm, counter spindle speed (max.): 4,000 rpm, distance between spindles: 1,300 mm, The original price of the machine was over €500,000! Turn-mill center with 2 turrets including milling drive and 2 Y-axes! TECHNICAL DETAILS Spindle distance: 1,300 mm Y-axis travel range: ± 50 mm Main spindle (BigBore 77) Main spindle speed range: 0 - 4,000 rpm Main spindle drive power: 29 kW Main spindle mount (DIN 55026): A2-8 Main spindle bar capacity max.: 77 mm Max. torque: 250 Nm Main spindle draw tube connection: M85 x 2 Sub spindle (BigBore 77) Nodpfx Adox Iz U Sotjkt Sub spindle speed range: 0 - 4,000 rpm Sub spindle drive power: 29 kW Sub spindle mount (DIN 55026): KK 8 Max. torque: 250 Nm Max. chuck size: 250 mm Sub spindle draw tube connection: M85 x 2 BMT turret (upper right) Max. speed BMT turret (upper): 12,000 rpm Max. drive power BMT turret (upper): 10 kW BMT turret (lower) Max. speed BMT turret (lower): 12,000 rpm Max. drive power BMT turret (lower): 10 kW MACHINE DETAILS Operating hours: 16,296 h Power-on hours: 20,707 h EQUIPMENT Hollow clamping cylinder incl. draw tube Parts ejector Through-spindle coolant in sub spindle Sinumerik 840D-sl/OPERATE control 22" multi-touch display IPC with 240 GB SHOPTURN conversational programming USB interface Network drive / Ethernet 3D simulation 2x 12-position BMT tool turrets C-axis for main and sub spindle TRANSMIT software Chip conveyor Minimum quantity lubrication Electrical cabinet air conditioning unit Hydraulic power unit Machine light 230 V socket at control panel 5 leveling elements Documentation