Used Electro Hydraulic Press for sale (42,072)

Condition: used, Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Ltodpfx Aowyplcoa Eoa Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Ltjdpfjvvkmbsx Aa Eja

Condition: good (used), Year of construction: 1973, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, Hydraulic 4-column press, manufacturer FIBRO, year of manufacture 1973, pressing force 315 t. Dimensions approx. 3.0 m × 1.6 m × 4.5 m. Lodpjx Nhaksfx Aa Eota Table size: 2.5 m × 1.5 m. Separate hydraulic unit and control panel. Maximum working area 883 mm (ram fully retracted). Powered, can be inspected on site. All information has been provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.

Condition: used, Double-column hydraulic press NEFF Type RHS 125 Z Ltsdpfx Aeguvtlea Esa Hydraulic drawing press Machine No. 3973 Year of manufacture 1983 Pressing force: 125 tons Column gap: 1050 mm Lateral column clearance: 550 mm Table size: 1000 x 800 mm Ram size: 1000 x 800 mm Ram stroke: 350 mm Installation height max.: 750 mm Table height above floor: 960 mm Blankholder force: approx. 12 tons at 105 bar Blankholder stroke: 100 mm Through-hole in table: Ø 202 mm Rapid advance speed downwards: approx. 360 mm/sec Rapid advance speed upwards: approx. 360 mm/sec Working speed: approx. 36 mm/sec Oil tank capacity: approx. 1000 liters Main pump motor power: 22 kW Control pump motor power: 4 kW Control pump motor power: 2.2 kW Electrical connection: 400 Volt, 50 Hz - Hydraulic blankholder cushion underneath the table with a through-bore in the table top Ø 202 mm - Precise 4-column guide on the ram corners - Infinitely variable pressing force adjustment - Electrically adjustable fixed stop via hydraulic motor - Cutting shock damping - Two-hand control panel for stroke release on the press - Free-standing control cabinet (1600 x 500 mm) - Documentation such as operating instructions, electrical wiring diagram, and PLC program printout available Required space L x W x H: 2600 x 2400 x 4270 mm Weight: approx. 14 tons Good condition

Condition: new, RHTC 100 TON M/H-M/C-2 Hydraulic Press Model 100 TON M/H-M/C-2 Year 2025 Condition New Stock Number 2796 Working Width 1000 mm Ltodpfx Aexwk E Aja Eja Stroke 380 mm Max Capacity 100ton

Condition: good (used), functionality: fully functional, Year of construction: 1994, Pressure: 160 t Bending length: 3,200 mm Control unit: CYBELEC CybTouch 15 PS Machine weight approx.: 14,000 kg Ltedpfx Aaexb Sm No Esa Accessories/Equipment: - Control unit retrofit March 2025 – CYBELEC CybTouch 15 - Foot switch - Tools

Condition: used, Year of construction: 1991, machine/vehicle number: 041-024/39, Press capacity: 63 ton Throat depth: 360 mm Stroke: 500 mm Daylight: 800 mm Ltsdpfx Aaovai R To Eea Table surface area : 750 x 560 mm Slide area: 630 x 400 Working speed: 60 mm / sec Return speed: 380 mm / sec Electrical connected load: 12,6 kW Dimensions L x W x H: 1.200 x 1.950 x 2.800 mm Weight of machine approx.: 4,3 ton

Condition: ready for operation (used), Year of construction: 1992, Available immediately from location: Edelhoff Hydraulic Single Column Press Type HEP 45 Year of manufacture 1992 Machine complies with the latest accident prevention regulations Pressure capacity 45 tons Table 1000 x 1000 mm Stroke 300 mm Drive 7.5 kW Weight 6 tons Ltsdpfex Icdnsx Aa Esa Price: €5,000 plus VAT, ex location

Condition: used, Year of construction: 2009, functionality: fully functional, total height: 2,800 mm, total width: 3,000 mm, total length: 7,000 mm, overall weight: 18,000 kg, Hydraulic filter press from the HPS series by Bucher Unipektin, specifically designed for applications in the food industry and the industrial sector. - Rotating cylinder-piston system with hydraulic drive - Flexible drainage elements are located between the piston and the cylinder base to channel the filtrate The press operates in cycles of pressing and loosening to achieve maximum juice extraction. Technical specifications Type: Hydraulic filter press Application: Solid-liquid separation of biological substances, food processing, also suitable for fruit Dry matter content: Product-dependent, approx. 10% Press cycle: 70–120 minutes depending on fruit type Control system: Self-optimizing, continuous operation without supervision Advantages: High yield Low product loss Robust construction Minimal maintenance requirement Technical data Throughput: approx. 150–300 kg DS/h Filter area: approx. 25–30 m² Dimensions (L × W × H): estimated at approx. 7,000 × 3,000 × 2,800 mm Ltsdpfxsx Nqcus Aa Eea Power consumption: approx. 11–15 kW

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread Ltodpfx Aowki Apsa Eoa - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: used, Year of construction: 1990, pressure 25 t total power requirement 4 kW 200 mm inward space Ltodpfx Aoxzk S Dsa Eoa

Condition: used, Year of construction: 2000, Press force: 85 t Bending length: 2050 mm Distance between uprights: 1750 mm Control: DELEM Stroke: 215 mm Throat depth: 410 mm Weight: 7,900 kg Machine dimensions: 2700x2100x2400 mm Accessories: - Two-hand operation Ltedpoxnxwnefx Aa Eoa - 2 support arms - Side safety doors - Lasersafe Fissler - Wila tool holder - Die shifting - Crowning - Tool cabinet

Year of construction: 2012, condition: ready for operation (used), General Data Machine weight 625 kg Ledpox D Sm Ijfx Aa Eeta This TOX MAG 008.261.A.001 was manufactured in 2012. A robust hydraulic press with a maximum pressing force of 85 kN and a total stroke of 150mm. It operates with a minimal power requirement of 0.3 kW and can handle upper tool weights up to 100kg. Ideal for operations requiring precise pressing with moderate power. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), Year of construction: 1968, Immediately available ex site: Ljdpfx Aaox Icdhj Eeta Hydraulic press brake Lotze Type P 100 – 3.5 Year of manufacture: 1968 Press force: 100 t Working length: 3500 mm Frame opening: 3050 mm Stroke: 315 mm Throat depth: 200 mm Drive: 11 kW Complete set of upper and lower tooling Weight: 8 t Price: EUR 4,000—plus VAT, ex site

Condition: good (used), C-frame press Capacity unknown, estimated pressing force 40 tons Maximum workpiece height: 250 mm Throat depth: 510 mm Stroke: 250 mm Weight: 3000 kg Stroke up and down adjustable via limit switches Ljdpjx A Tygjfx Aa Eeta Note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we advise you to verify all relevant details. Financial information VAT/margin: VAT: The shown price is excluding VAT (VAT deductible for businesses)

Condition: good (used), functionality: fully functional, throat depth: 500 mm, pressing force: 160 t, table width: 1,250 mm, Output 160 tonnes --- Working length 1250 mm --- Stroke 250 mm Thrust 500 mm Installation height max. 480 mm Weight approx. 11.2 tonnes Output 30 kW Area of application: universally applicable machine: Straightening / bending / pressing / folding etc. --- Was previously used as a folding press with system tool holder + tools Ltedjx Nxrwspfx Aa Eoa .

Condition: new, Sheet metal cutting moulds Sheet metal cutting moulds Ledpsfuangsfx Aa Ejta Sheet metal form moulds Hot brass forging Hot steel forging Cold steel forging Cold forged aluminium & steel Deep drawing moulds Automotive and spare parts white goods Product Info: No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Condition: new, Sheet metal forms Sheet metal forms Deep drawing moulds Hot aluminium & steel forging Automotive and spare parts Food packaging industry Electrical panels Industrial cooling white goods Construction & building Hair metal cutting dies Product Info: No pit required Steel construction body C-Channel home plate & ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Ltedpfx Aofuam Uea Eja Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Condition: new, Sheet metal cutting dies Sheet metal cutting dies Sheet metal forming moulds Hot forged brass Deep drawing moulds Cold forged aluminium steel Automotive and spare parts White goods Industrial kitchen parts Industrial cooling parts Kitchen appliances Construction & building Product Info: Ledpfx Aaofuam Rj Eeta No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Condition: new, Sheet metal cutting moulds Sheet metal cutting moulds Sheet metal form moulds Hot brass forging Hot steel forging Cold steel forging Cold forged aluminium & steel Ltedpefuancjfx Aa Eea Deep drawing moulds Automotive and spare parts white goods Product Info: No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Brand : Schuler Schuler EB 2-500- 2.75-0.85 H-frame hydraulic press Power ( ton ) : 500 tons Table dimensions ( x-y/mm) : 3000×1800 Slide dimensions ( x-y/mm) : 3000×1800 Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Ltodehcnxrepfx Aa Esa Control Siemens S7 New hydraulic presses for sale

Year of construction: 2012, condition: used, Hounsell down stroke Hydraulic forming press H frame Year 2012 200ton Daylight 750mm Nominal Table size W x L 2100mm x 1200mm Max Weight top tool 800kg Max system Pressure 340 bar Ram diameters 110mm Number of Rams 6 Seal Dimensions 110 x 130 x 16 Machine construction fabricated frame Machine weight 95000 kg approx Approach speed 150mm/s Pressing speed 8mm/s Lodpfxef A R Uhs Aa Ejta Return speed 80-90mm/s Can quote for new hydraulic presses c and h frame

Year of construction: 2002, condition: used, Used Rhodes 60ton hydraulic press for sale Four pillar hydraulic press for sale. Year/new: 2002 Nominal force: 63 tonnes Design pressure: 200 bar Maximum stroke: 250 mm Approach speed: 150 mm/s Pressing speed: 15 mm/s Return speed: 150 mm/s Maximum tool size: 800 mm x 800 mm Maximum top tool mass: 750 kg Mass of press: 7000 kg Number of lifting points: 4 Electrical supply 400-3-50 Pneumatic supply 5.5 bar Worson Die Cushion Type DDC 104 In stock and available for immediate delivery. Ltjdpsf A R Adofx Aa Eoa Can quote for new hydraulic c, d and h frame presses. Free standing hydraulic press complete with hydraulic cushion.

Year of construction: 1985, condition: used, Used HUGH SMITH 1000 Ton Hydraulic 4 Post Downstroking Press for sale Operating Speeds 50 mm/sec. Gravity approach. 6 mm/sec. Pressing. 50 mm/sec. Return. Working Height 1060 mm. Press Weight 102 tons total. Towler Hydraulics. Machine originally upstroke (see original drawing attached) but converted to downstroke and refurbished in 1985 (see updated drawing attached) with new electrics. Lodpfx Aasf A R Uzj Eeta Brand new c, h and d frame hydraulic presses for sale – can quote at competitive prices and built to your specification. New 1000ton hydraulic presses available for sale upon request

Condition: good (used), Year of construction: 1994, functionality: fully functional, total length: 2,700 mm, pressing force: 1,000 t, table width: 1,500 mm, distance table to ram: 1,750 mm, Used 1000ton hydraulic press for sale 1000TON PRESS SIDE FRAME Max TYPE CAPACITY 1000ton Ltodoucdgpspfx Aa Esa PRESSURE 175kgf.cm2 STROKE 1000mm DAYLIGHT 1750mm BOLSTER AREA 2700mm x 1500mm PULL BACK CAPACITY 52.7ton DIE CUSHION CAPACITY 50ton DIE CUSHION STROKE 180mm MAIN MOTOR 415v 50hz 6p 110kw OIL TANK CAPACITY 1800L