Used Elb for sale (52)

Condition: used, Year of construction: 1977, functionality: not functional, machine/vehicle number: 145240377, grinding length: 650 mm, grinding width: 350 mm, total height: 2,350 mm, total length: 2,800 mm, total width: 1,800 mm, table load: 300 kg, type of input current: three-phase, overall weight: 2,800 kg, input voltage: 380 V, space requirement height: 2,350 mm, Equipment: documentation/manual, We are offering this used ELB-Schliff Orion635 VA I-Z (SW 4/5) surface grinding machine, year of manufacture 1977. Operating voltage: 3×380 V Frequency: 50 Hz Lajdpfx Amoy Nhxyjroc Direct current: 215 A Rated current: 15 A Fuse: 16 A Control voltage: 220 V DC voltage: 110 V If you have any questions or need more information, feel free to send us a message or call us.

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 4,800 kg, ELB Perfekt 8 SPS, year of manufacture 1998, grinding area 800 x 400 mm, grinding wheel 300 x 50 mm, 4.3 kW spindle power, SPS control for automatic grinding cycle (roughing, finishing, sparking out, lifting), dresser mounted on spindle head with compensation. The machine is currently being overhauled by us: the grinding spindle is being newly fitted with bearings, the guideways are being hand-scraped. After the overhaul, the machine will meet the geometry of a new machine and is thus immediately ready for operation. Accessories: electro-permanent magnetic chuck 800 x 400 mm, water tank with automatic paper filter, partial enclosure. All functions are tested, and the machine can be demonstrated under power at our facility. We are also happy to handle installation and on-site training. Financing/leasing is no problem; we’d be happy to provide an offer! Lodsrpz Evopfx Amreac

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, grinding length: 500 mm, grinding width: 400 mm, ELB Smart Line S 5 STC, year of manufacture 2008, grinding area X/Y/Z: 500mm/400mm/475mm, grinding wheel dimensions: 300mm/50mm/76.2mm, table speed up to: 30m/min, max. table load: 400kg, spindle taper: 36mm, control: Siemens STC, magnetic chuck 500 x 250 mm (can be enlarged), incl. coolant tank with paper filter system, grinding spindle with new bearings, all functions checked, in very good condition. The machine can be inspected under power at our facility; test grinding is also possible. We are happy to handle installation/training at your site as well as ongoing service in the future. Ledpfxsr D R I Sj Amrsac

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 3,600 kg, ELB Perfekt 6, year of manufacture 2002, grinding area 600 x 400 mm, grinding wheel 300 x 50 mm, 4 kW spindle power, automatic grinding cycle, roughing, finishing, spark-out, lifting, dresser mounted on spindle head with compensation. The machine has been professionally overhauled by us and now meets the geometry of a new machine. The grinding spindle has new bearings. Accessories: electro-permanent magnetic clamping plate 600 x 400 mm, water tank with paper filter unit. All functions have been tested and the machine can be demonstrated under power at our facility. We are also happy to handle on-site installation and training, as well as future servicing. Financing/leasing is available; we will be pleased to provide an offer! Laodpsxdalfofx Amrjc

Condition: good (used), Year of construction: 1999, machine/vehicle number: 490880699, ELB CNC-controlled profile grinding machine, type Perfect Future BD10 Unicon, 4 axes Used, well-maintained 4-axis CNC profile and surface grinding machine Siemens control system Grinding length 1000 mm Grinding width 600 mm Grinding height 600 mm Lasdpfx Aeiwa S Temrsc Grinding wheel dimensions 400 x 100 x 127 mm 4th axis Universal paper band filter system with permanent magnetic pre-filter Coolant unit Various grinding wheels

Condition: good (used), Year of construction: 2003, ELB Rotary 40 NC-K rotary table surface grinding machine, table diameter 400 mm, grinding height 300 mm, year of manufacture 2003, ELN NC-K control, spindle power 4 kW, grinding wheel 300 x 50 x 76.2 mm, rotary table with magnetic chuck diameter 400 mm, full enclosure, coolant system with paper band filter, can be inspected under power, we are happy to take care of installation / training and subsequent on-site service! Financing/leasing is no problem, we are happy to provide an offer! Lsdpfx Ameuiafujrsac

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm Ledpjwgnz Asfx Amreac table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges.

Condition: good (used), Year of construction: 1985, functionality: fully functional, The ELB SW 4/2 is a classic conventional surface grinding machine. Specific data may vary depending on the version (e.g., VA I, VAI-Z), but the key technical specifications typically fall within the following range: Laedpjyy Aczjfx Amrjc Machine type: Surface grinding machine (horizontal) Working area Grinding length: approx. 450 mm Grinding width: approx. 250 mm Max. workpiece height: approx. 280 mm Grinding spindle Grinding wheel: Ø 250 mm × 25 mm width Bore: 51 mm Speed: approx. 1,430 / 2,900 rpm Spindle motor: approx. 2.5 kW (total power ~4.5 kW) Axis travels Vertical travel (Z): approx. 400 mm General data Total power: approx. 4.5 kW Machine weight: approx. 1,800 kg Dimensions (L×W×H): approx. 1,800 × 1,400 × 2,000 mm

Condition: like new (used), ELB SMART BD10 STC is a CNC surface/profile grinder engineered for high precision, accuracy and reliability. Capacities: table 1360×590 mm, X1100 Z670 Y400 mm, grinding 1000×600 mm, table load 1000 kg. Specs: wheel Ø400×100 mm (bore127), 1450 rpm, spindle 10 kW, table 2–30 m/min stepless, feeds up to 2000/1500 mm/min, vertical rapid 1 m/min, 3×400V 50Hz, total 30 kW; machine ~6900 kg; dims 3550×2410×2660 mm. Accessories: coolant, paper filtration, oil‑mist extractor, magnetic plate 800×600, redressing/profile roll devices, wheel/flange sets, electronic handwheel. Achieves tight tolerances; suited to automotive, aerospace, toolmaking, medical, watchmaking. Lasdpfx Amoyxn N Doroc

Condition: used, ELB PERFEKT BD 8 SPS is a surface grinder engineered for precision, high accuracy and reliability. Capacities: table 1360×590 mm; grinding length 1250 mm; max grinding 600×400 mm; travels X900 Z540 Y400; table load 900 kg. Specs: wheel 400×100 mm, 1440 rpm, bore 127 mm, spindle cone 60 mm; grinding spindle motor 20 kW; supply 3×400 V 50 Hz; total power 18.5 kW; machine weight ≈5400 kg. Accessories: paper filtration, electrical magnetic chuck 1200×600 mm, redressing device, lamp, central lubrication. Achieves tight tolerances; ideal for automotive, aerospace, tooling, medical and watchmaking. Laodpfx Amsyxn Igjrec

Condition: ready for operation (used), ELB SWN 5 VA II Horizontal Surface Grinding Machine - Grinding area X/Y/Z: 525x375x255 mm - Magnetic chuck: 700x300 mm - Table clamping area: 900x250 mm - Table longitudinal stroke: 10-625 mm - Maximum table load: 280 kg - Table feed: 1-30 m/min - Reciprocating grinding: 3-30 m/min - Distance from table to spindle center: 525 mm - Vertical feed rate: 2-180 mm/min - Adjustable infeed: 0.001-2 mm - Grinding wheel speed: 3000 rpm - Coolant system - Machine feet - Documentation - Complete technical data – see photos Dimensions (LxWxH): 2.7x2.2x2 m / Weight: 3500 kg Lajdey Dcpcspfx Amrjc Subject to errors and input mistakes

Condition: used, Year of construction: 1982, grinding length: 600 mm, grinding width: 550 mm, total height: 2,490 mm, feed length X-axis: 600 mm, feed length Y-axis: 470 mm, feed length Z-axis: 600 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, table length: 1,100 mm, table load: 400 kg, table width: 450 mm, grinding wheel width: 100 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 1,400 rpm, overall weight: 5,300 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 470 mm, travel distance Z-axis: 600 mm, rotational speed (max.): 1,400 rpm, rotational speed (min.): 1,400 rpm, grinding spindle speed: 1,400 rpm, disc diameter: 400 mm, space requirement height: 2,490 mm, We are offering this used ELB-Schliff Oprimal 3 ND surface grinding machine, year of manufacture 1982. Maximum grinding length: 600 mm Maximum grinding width: 550 mm Working height with new grinding wheel: 400 mm Working height with worn grinding wheel: 600 mm Spindle taper ratio: 1:5 Manual vertical travel of grinding spindle: 600 mm Manual horizontal travel of grinding spindle: 470 mm Laedpeyrn Sdjfx Amrec Swivel range grinding spindle: 1° Clamping table surface: 1100 x 450 mm Small table stroke: 80 mm Number of T-slots: 1 T-slot width: 16H7 mm Cross feed (table): 470 mm Longitudinal feed (table): 600 mm Table load capacity: 400 kg Outside diameter of grinding wheel: 400 mm Inside diameter of grinding wheel: 127 mm Grinding wheel thickness: 100 mm Recess 1 diameter: 190 mm Recess 1 thickness: 20 mm Recess 2 diameter: 190 mm Recess 2 thickness: 30 mm Machine height: 2.49 m Weight: 4700/5300 kg Direct spindle speed: 1400 min⁻¹ Continuous feed rate, grinding spindle carriage: 1.2 m/min Intermittent feed rate, grinding spindle carriage: 3–60 mm Hydraulic table feed speed: 1–30 m/min If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1996, grinding length 1.000 mm grinding width 550 mm workpiece height 400 mm table surface area 1.580 x 550 mm Ledpfjxx A Dmox Amrsac table load capacity 950 kg magnetic clamping plate 1.000 x 550 mm x-Travel 1.200 mm table feed 1 - 30 m/min vertical feeds: 1 - 300 mm/min z-axis 470 mm cross feed 1 - 2.000 mm/min dimensions of grinding wheel 400 x 100 x 127 mm grinding wheel speeds 1.500 - 3.500 U/min grinding spindle drive 11,00 kW total power requirement 23,00 kW weight of the machine ca. 7,50 t dimensions of the machine ca. 4,50 x 3,20 x H2,90 m Coolant system with coolant pump integrated in the hydraulic tank, exhauster.

Condition: used, grinding length / mm grinding width / mm Lasdsxxb Nbspfx Amrec workpiece height / mm total power requirement / kW weight of the machine ca. / t required space / m

Condition: repair required (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: 49299, rotary table diameter: 600 mm, grinding height: 400 mm, workpiece weight (max.): 300 kg, grinding diameter: 500 mm, workpiece diameter (max.): 500 mm, TECHNICAL DETAILS Workpiece diameter: 500 mm Workpiece weight: 300 kg Workpiece height: 400 mm Grinding diameter: 500 mm Grinding height: 400 mm Table load capacity: 300 kg Magnetic rotary table diameter: 600 mm Rotary table speed: 20–80 rpm Y-axis Max. feed rate: 300 mm/min Incremental position measurement system, rotary encoder, resolution: 0.001 mm Z-axis Max. automatic cross travel: 330 mm Cross feed: 4–1,500 mm/min, adjustable Incremental position measurement system, rotary encoder, resolution: 0.001 mm Grinding spindle taper: 60 mm Grinding wheel: 400 x 100 x 127 mm MACHINE DETAILS Lajdexr U T Topfx Amroc Total power requirement: 18 kW Grinding spindle drive: 10 kW Space requirement approx.: 2,500 x 2,700 x 2,800 mm Control cabinet dimensions (L x H x D): 1,600 x 2,200 x 500 mm EQUIPMENT Coolant system with paper band filter NK grinding program Electronic handwheel switchable for B-Y-Z axis Machine enclosure with manually operated sliding door for loading and unloading Note: The frequency converter for the grinding spindle is defective. An offer from ELB is available (costs € 3,712.50 + packaging and shipping).

Condition: used, Year of construction: 1990, grinding length 1500 mm grinding width 550 mm workpiece height 400/450 mm table-size 1900 x 450 mm mm Laedswlviropfx Amroc table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 15 kW voltage 380 V weight of the machine ca. 5 t Machine was reconditioned and modernized in 2015 with modern control. Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges.

Condition: good (used), Magnetic table 455 x 170 mm digital display water tank Honing device Laodjtu Il Topfx Amrec Wet sanding device

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 19631, grinding length: 1,500 mm, grinding width: 900 mm, grinding spindle speed: 1,000 rpm, controller manufacturer: Siemens, workpiece height (max.): 690 mm, The machine was completely overhauled and modernized in 2009 & 2023. In 2023, the X-axis, including the drive, was refurbished and new magnetic plates were installed! TECHNICAL DETAILS Grinding width: 900 mm Grinding length: 1,500 mm Grinding area: 1,500 x 900 mm Workpiece height: 690 mm Table size: 1,800 x 900 mm Longitudinal table speed: 4 - 36 m/min Cross table speed: 1 - 60 m/min Grinding wheel dimensions: 500 x 100 x 203 mm Grinding spindle speed: 1,000 rpm MACHINE DETAILS Control system: Siemens Lajdpfx Amox Dcfbjroc Electrical Data Voltage: 400 V Total drive power: 80 kW Grinding spindle drive: 28 kW Machine weight: approx. 17 t EQUIPMENT Coolant system Dressing device Automatic vertical feed

Condition: used, dayligth 420 mm Magnetic field 420x200 mm grinding length . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Lajdpeyqtt Refx Amrsc If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1987, functionality: fully functional, grinding length: 1,000 mm, grinding width: 510 mm, total height: 2,400 mm, total length: 5,500 mm, total width: 2,500 mm, grinding height: 300 mm, grinding wheel diameter: 400 mm, table length: 1,000 mm, table load: 400 kg, table width: 510 mm, grinding wheel width: 80 mm, Our trusty Elb Schliff surface grinding machine of the type Orion 1052 NPC -1 is for sale. The machine is fully functional and ready for immediate use Technical data: Magnetic table L*W: 1000*510 mm Grinding wheel diameter: 400 mm Grinding wheel width: 80 mm max. sanding height: 300 mm Coolant system available Loading and transport can be organized on request, for an additional charge All prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale Laodpfx Amjtr D A Dorec PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours?

Condition: good (used), Year of construction: 1988, grinding length: 1,000 mm, grinding width: 550 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12-1988 Delivery time: immediately Laedpfou Rqynsx Amrjc Electro-permanent magnetic clamping plate SAV 1000 X 400 mm Fine pole pitch 45-5 mm Electric straightening device with compensation Digital display vertical Holder with grinding wheel max. 400 X 100 X 127 mm Spindle motor 7.5 KW 1435 min/1 Setting wedges Coolant system with universal paper belt filter Complete documentation

Condition: used, Year of construction: 1980, workpiece diameter 600 mm workpiece weight 400 kg workpiece height 300 mm total power requirement 35 kW weight of the machine ca. 4500 kg Lodpfx Aot Abrwjmroac

Condition: used, Year of construction: 2008, operating hours: 12,310 h, functionality: fully functional, machine/vehicle number: 50998, grinding length: 1,000 mm, grinding width: 600 mm, total height: 400 mm, total length: 1,200 mm, feed length X-axis: 1,200 mm, workpiece weight (max.): 500 kg, grinding wheel diameter: 400 mm, table length: 1,000 mm, table load: 600 kg, table width: 600 mm, grinding wheel width: 130 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 50 rpm, overall weight: 6,400 kg, table height: 100 mm, grinding spindle motor power: 32 W, rotational speed (max.): 3,200 rpm, rotational speed (min.): 50 rpm, power: 48 kW (65.26 HP), input voltage: 400 V, disc diameter: 400 mm, Equipment: documentation/manual, rotational speed infinitely variable, ELB- Perfekt-Future BD 10 CNC Machine in excellent condition, fully functional, for sale only due to lack of space and overcapacity. Laodpfex Th S Ujx Amrec

Year of construction: 1984, condition: ready for operation (used), Grinding dimensions X/Y/Z: 500mm/300mm/350mm, grinding wheel dimensions X/Y/Z: 300mm/50mm/76.2mm, magnetic table dimensions X/Y: 500mm/200mm, pole pitch: 5mm, machine dimensions X/Y/Z: approx. 3050mm/1600mm/2400mm, weight: approx. 3000kg. Including coolant system, paper band filter, sine table, digital display, and grinding wheel flange. Documentation available. An on-site inspection is possible. Laodpjxpw Ubsfx Amrsc

Condition: used, Technical details: Ljdpsyhwhwofx Amreac Magnetic plate: 900 x 450 mm Heidenhain measuring system Automatic feed Cross movement electrically and manually via handwheel Vertical movement electrically and manually via handwheel Longitudinal movement hydraulically and manually via handwheel Grinding spindle with plain bearings