Used Duplo System 5000 for sale (3,394)

Condition: used, Year of construction: 2007, Manufacturing year: 2007 Mazatrol matrix Nexus Travels X/Y/Z: 730/730/740mm Pallet size 500x500 mm Prsdsx Nm Nwspfx Aa Eof Spindle speed: 18000 rpm ISO 40 ATC 40

Condition: excellent (used), Year of construction: 2005, Offer consisting of: Very well-maintained block gluing press, year of manufacture 2005 Pjdpfxsx E D Sbe Aa Ejrf

Condition: used, Year of construction: 2010, clamping force: 320 kN, displacement volume: 891 cm³, injection pressure: 2,420 bar, overall weight: 17,300 kg, load hours: 47,000 h, screw conveyor diameter: 60 mm, terms of delivery: EXW (ex Works) Pjdpfx Ajx E A Twea Eerf delivery time: on request terms of payment: 100% prior to delivery

Condition: new, Year of construction: 2025, 5000 m³/h power capacity 5,5 kW Speed 3000 U/min. 280 mm Dimensions (L/W/H) 2460x1250x1600 mm Weight 380 kg Podpfsw Nbk Uex Aa Eorf

Condition: used, Keyence Type: VHX-5000 Only 10 operating hours! Technical data: Frame rate: 50 F/S (max.) Resolution: Normal: 1600 (H) x 1200 (V) Approx. 1000 TV lines 3CMOS *1, *3: 1600 (H) x 1200 (V) Approx. 1200 TV lines (2 million pixels x 3CMOS mode). Excellent color reproducibility. High Definition*3: 3200 (H) x 2400 (V) Approx. 1600 TV lines Prodpfowr Ax Hjx Aa Eef Super fine*3: 4800 (H) x 3600 (V) Approx. 2000 TV lines or more 18 Megapixel x 3CMOS*2, *3: 4800 (H) x 3600 (V) Approx. 2000 TV lines or more (18 million pixels x 3CMOS mode). Excellent color reproducibility. High dynamic range: Each RGB pixel in 16-bit resolution Electronic shutter: Automatic, Manual, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 sec. to 4 sec. Adjustable in 0.1 sec. steps. White balance: Push-set, auto, manual, preset (2700 K, 3200 K, 5600 K, 9000 K) LCD monitor*5: Size color LCD (IPS) 23" Panel size 509.184 (H) x 286.416 (V) mm Pixel pitch 0.2652 (H) x 0.2652 (V) mm Number of pixels 1920 (H) x 1080 (V) (FHD) Display color approx. 16.77 million colors *4 Brightness 300 cd/m2 (center 1 point, typical) Contrast ratio 1000:1 (typical) Viewing angle ±89° (typical, horizontal), ±89° (typical, vertical) Approx. 1,680,000 images (if a 2-megapixel image is compressed) up to approx. 55,000 images (if a 2-megapixel image is not compressed) Image format: With compression: JPEG; Without compression: TIFF Maximum image size 20,000 pixels (H) x 20,000 pixels (V) (with image stitching function) Light source: Super bright LED lamp Lamp life 40,000 hours (reference value) Color temperature 5700 K (typical) List of components: VHX-5000 control unit VHX-2000D digital microscope VHX-S90BE Free-angle Observation System base unit VHX-S90F Free-angle Observation System lens holder VH-Z250R Dual-light high-resolution zoom lens 250x - 2500x Condition: used Scope of delivery: (As shown) (Changes and errors in technical data and information excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), Year of construction: 2008, operating hours: 12,100 h, lifting height: 4,500 mm, fuel type: gas, mast type: duplex, color: yellow, BAUMANN sideloader Year of manufacture: 2008 12,100 operating hours Fork spread adjustment Predpexy R Ddsfx Aa Eef New tires Lifting height: 4.5 meters Maximum load capacity: 5,000 kg Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: like new (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, table width: 660 mm, table length: 1,320 mm, MORI SEIKI MACHINING CENTER TECHNICAL SPECIFICATIONS Brand: Mori Seiki Model: NV 5000 a1 CNC: Fanuc Year: 2008/2009 Table: 1320 x 660 mm X: 1020 Y: 500 Z: 500 Taper: BT 40 Prodpfox Ngqhox Aa Eof PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE, DMG MORI)

Condition: refurbished (used), operating hours: 3,700 h, functionality: fully functional, total length: 6,000 mm, total width: 2,500 mm, overall weight: 18,400 kg, year of last overhaul: 2009, The Komptech Crambo 5000 shredder is in perfect condition and has been refurbished in 2009 where it got a new mercedes engine. The Mercedes-Benz V8 engine is 435 PK/320 KW and has 2 turbos, making the machine more fuel efficient and powerful. Pjdpsxyk Agjfx Aa Esrf The engine's working hours are 3700 hours. - The machine includes documentation regarding the inspections and history of the shredder. Additionally included are the schematics of all parts in the shredder and the manual of the engine. - The shredder has a remote control. If there are additional questions or the wish to inspect the machine then feel welcome to contact us.

Condition: used, Year of construction: 2017, clamping force: 550 kN, displacement volume: 1,239 cm³, injection pressure: 1,990 bar, overall weight: 21,000 kg, load hours: 21,636 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) delivery time: on request Podpfxjx E A Tqs Aa Esrf terms of payment: 100% prior to delivery

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 920x2100x2150 mm Weight 300 kg Podpfxovz Erpj Aa Eerf Total power requirement 5,5 kw

Condition: excellent (used), IPG Prodpfxetr Ep Ns Aa Eef Type: YLS - 5000 Description: IPG Ytterbium laser system YLS-5000-S1T 5 kW laser power Compact footprint Highly efficient ECO modules Compatible with all types of processor heads Independent power control via fieldbus interface Advanced IPG power supply with integrated safety Laser emission ON watchdog Data: YLS-5000-S1T 400-460V AC 3P/PE 50/60Hz 59A 63A/80kA YEAR: 2011 S/N: 11101050 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Used NAUTAMIX Stainless steel mixer-Total volume : 5000 litre-Useful capacity : 4000 litre-Vessel Ø 2320 mm x 3500 mm-Drive =Screw geared motor : Hp 10 - Rpm 532 - 3x 400/690 volts-Arm geared motor : Hp 2 - Rpm 25 - 3x 230/400 volts-Without drain valve-Without electric control panel-Without frame Prodpfx Aex Nizcea Esf

Condition: used, all stainless steel electrically heated (= 300 kW) total power 313 kW nett belt length 5.000 mm nett belt width 650 mm Predpsxp Hhkofx Aa Ejf frying time min/max : 20-250 sec throughput speed min/max 1,2-15 m/min min. oil volume at oil level of 2cm above the belt : ± 1.009 L max. oil level above the belt : 90 mm setting overheating protection : 220°C adjustable speed outfeed conveyor oil level control circulation pump sediment removal system filter lifting unit with electric hoists weight : 4.000 kg capacity : 3 x 400V, 50Hz

Condition: used, functionality: fully functional, Year of construction: 2025, total length: 2,240 mm, load capacity: 5,000 kg, empty load weight: 200 kg, construction height: 580 mm, construction width: 500 mm, Crane arm Psdpewri Unofx Aa Eerf Load center: 600 Condition: Ready for use and fully functional Technical condition: New Description: Length: min: 2240 mm - max: 3830 mm Length: min: 2240 mm - max: 3830 mm

Condition: used, mileage: 110,480 km, power: 160 kW (217.54 HP), first registration: 08/2009, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: yellow, gearing type: automatic, emission class: euro4, total width: 2,450 mm, total height: 3,700 mm, Equipment: air conditioning, all wheel drive, crane, Errors and prior sale excepted! Internal number: 1413. V219925 ----U 5000 flatbed Crane Trailer coupling Double cab with six seats Air conditioning ... and much more. Psdpfxjw Umx Us Aa Esrf ----The vehicle is unprepared! Nationwide delivery available at additional cost. Errors and prior sale excepted. We are happy to accept your vehicle in part exchange. Financing / leasing possible even without down payment! Any further questions? We are happy to advise you!

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2100x920x2250 mm Psdpfevz Eriex Aa Eerf Weight 410 kg Total power requirement 5,5 kw

Condition: excellent (used), Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analysis); 0.000 to 3.000 ml/min (capillary). Flow rate accuracy: < 0.1 %. Flow rate precision: < 0.1 %. Gradient dosing accuracy and precision: ± 0.5 % at 2 ml/min (analysis only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analysis); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 55 lb. (24.1 kg) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus Dual Pump 6Port Valve MXP9900-000 AFC-3000 Automated Fraction Collector RFC-10 Controller Condition: used / used Scope of delivery: (See pictures as shown) (Changes and errors in the technical data, specifications are reserved!) Pedpehh Ibtefx Aa Ejrf Further questions we can answer on the phone for you.

Condition: good (used), Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Manufacturer: Kampmann, air heater heat exchanger Prjdpsu N Sibjfx Aa Eef -Type: Tip 5000 2-stage 157000573036 -Power: 53.5/64.9 kW -Fan: Ziehl-Abegg -Operating pressure: max 16 bar Quantity: 1 piece available -Dimensions: 800/390/H880 mm -Weight: 49 kg

Condition: good (used), Year of construction: 2005, Main components: Washing machine, scanner, inspection station, gas filling press, cork applicator, automatic sealing, water treatment. The system dates from 2005, except for the washing machine (1992). Predpex Dtq Isfx Aa Esf The brushes are in perfect condition. Total length of the system: approx. 43.8 m. Condition: good, second-hand

Condition: used, Year of construction: 2007, operating hours: 42,000 h, functionality: fully functional, 2 identical systems consisting of: Psdpfx Aow R T Twja Eorf 1 cloos welding robot romat 350 incl. control unit, teach pendant incl. cable Connection cable between control unit and robot Gasnozzle sensing, seam tracking, point editor, CTMS, Manax C bow construction for robot in a fixed position Cloos welding machine MC 3 353 ( 350 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: on request . Subject to prior sale. Both systems together will be offered for a special price !!

Condition: used, mileage: 149,986 km, power: 160 kW (217.54 HP), first registration: 03/2009, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: yellow, gearing type: automatic, emission class: euro4, total width: 2,450 mm, total height: 3,700 mm, Equipment: air conditioning, all wheel drive, crane, Errors and prior sale excepted! Internal number: 1425. V219543----U 5000 flatbed Palfinger crane Tow bar ----The vehicle is unprepared! Nationwide delivery available at extra cost. Errors and prior sale excepted. We are happy to accept your vehicle as part exchange. Financing / leasing available without down payment! Do you have further questions? We are happy to advise you! Predpjw Ua Rwjfx Aa Eef

Condition: excellent (used), Keyence Here we offer you a 3D profilometer. Prjdpfx Aajkvntho Eef Technical data: Viewing and measuring range: Horizontal: mm 24.0 12.0 8.0 6.0 7.6 3.8 2.5 1.9 Vertical: mm 18,0 9,0 6,0 4,5 5,7 2,9 1,9 1,4 Measuring resolution 0.1 μm : Height measurement: Height measuring range Without image composition in Z : 10 mm 1 mm With image composition in Z : 50 mm 30 mm Repeatability (σ)*1 Without image composition in Z : 0.4 µm With image composition in Z : 1.0 µm Width measurement: Measurement accuracy*1 Without image composition in Z : ±2.5 μm With image composition in Z : ±4.0 μm Repeatability (σ) *1 1 μm 0.5 μm Measurement accuracy*1 ±5 μm ±2 μm XY stroke 184x88mm Z stroke 73mm Incl. VR-5000 control unit + software with licenses Type: VR-5200 + VR-5000 Sale ex location!! Condition: fully functional + no traces of use For more technical information, please contact the manufacturer. Scope of delivery: (As shown) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Year of construction: 2021, operating hours: 300 h, functionality: fully functional, 1 cloos welding robot QRC 350 incl. control QC2, teach pendant incl. cable Prsdpexvbu Ejfx Aa Eof Connection cable between control unit and robot Touch sensing, seam tracking, point editor, C bow construction for robot in a fixed position Cloos welding machine Qineo Next 452 (450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: appr. 3 month . Subject to prior sale.

Condition: excellent (used), Keyence Model: VR-5200 Type: Measuring Head Light Sources Viewing Light Source: LED Ring Light (red, blue, green) Measurement Light Source: White LED Control Unit: VR-5000 Viewing and Measurement Range Macro Mode Magnification (based on a 15-inch monitor) 12×: Horizontal 24.0 mm Vertical 18.0 mm Magnification (based on a 15-inch monitor) 25×: Horizontal 12.0 mm Vertical 9.0 mm Magnification (based on a 15-inch monitor) 38× Horizontal 8.0 mm Vertical 6.0 mm Magnification (based on a 15-inch monitor) 50× Horizontal 6.0 mm Vertical 4.5 mm Micro Mode Magnification (based on a 15-inch monitor) 40× Horizontal 7.6 mm Vertical 5.7 mm Magnification (based on a 15-inch monitor) 80× Horizontal 3.8 mm Vertical 2.9 mm Magnification (based on a 15-inch monitor) 120× Horizontal 2.5 mm Vertical 1.9 mm Magnification (based on a 15-inch monitor) 160× Horizontal 1.9 mm Vertical 1.4 mm Zoom 1× to 4× Height Measurement Measurement Resolution 0.1 µm Height Measurement Range Without Z-Compositing Macro Mode: 10 mm Micro Mode: 1 mm With Z-Compositing Macro Mode: 50 mm Micro Mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 µm With image stitching in Z 1.0 µm Measurement accuracy Without image stitching in Z ±2.5 µm With image stitching in Z ±4.0 µm Width measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image stitching Fully automatic measurement (automatic XY control + automatic Z focus), Automatic assignment, automatic area setup Measurable XY area 206 x 104 mm Stage XY travel 184 × 88 mm (motorized) Z travel 73 mm (motorized) Load capacity 4.5 kg Working distance 75 mm Image pickup element 4-megapixel CMOS, B/W Transmitter lens Dual telecentric lens x 2 Receiver lens Dual telecentric lens Data processing Dedicated PC according to KEYENCE specifications (Operating system: Windows 11 Pro) Power supply Prsdpfx Aaswc Sxdo Ejf Voltage 100 to 240 V AC, 50/60 Hz Power consumption Max. 200 VA Environmental resistance Ambient temperature 15 to 30 °C Relative humidity 20 to 80% RH (no condensation) Weight Approx. 28 kg (weight of the measurement unit only: approx. 11 kg) Distance extension stage Viewing software VR-5000 Version 3.3.5.75 Image composition module VR-H3J Creates a single large image from a series of images captured with the viewing software. You see color images. Analysis Expansion Module VR-H3CA Extends the functionality of the analysis software. Can perform measurement comparison and 3D CAD measurement comparison. Condition: Used Scope of delivery: (as shown) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: used, Year of construction: 2021, operating hours: 300 h, functionality: fully functional, 1 cloos welding robot QRC 350 incl. control QC2, teach pendant incl. cable Connection cable between control unit and robot Pedoxvbw Hspfx Aa Ejrf Touch sensing, seam tracking, point editor, C bow construction for robot in a fixed position Cloos welding machine Qineo Next 452 (450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: appr. 3 month . Subject to prior sale.