Used Drying Rack for sale (5,700)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. Bsdjd Tqalspfx Acvolf The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) Bjdpfx Acsh Ek Daevelf - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Blodpefdkb Uefx Acvjf The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable Bledpfxsfdkbhj Acvjf - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Bljdpfx Acjmhhf Sevjf Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Bsdpfxjmhhl Hj Acvolf Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) Bjdomidyfjpfx Acvslf - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: Bljdjmkixwspfx Acvef 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm Bledpeqt Dmyefx Acvof - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Sliding rack for glass A sliding rack for glass size 170×380 cm Bledpfjxpvuaox Acvjf 10 drawers Dimensions: 213 cm H x 247 cm W x 443 cm D

Year of construction: 2019, condition: excellent (used), functionality: fully functional, The mobile dry air dryer of type KKT dries hygroscopic granulates directly next to your processing machine, and is also equipped with a TYPE 608 conveying unit. The saturated dry air flows through two alternating desiccant containers, where it is re-dried. This creates ultra-dry air with a dew point of approx. -35 °C. Dry air dryer: KKT 100S Dry air flow rate: 100 m³/h Desiccant containers: both NEW Container volume: 200 liters Mobile design Convenient touchscreen menu navigation Conveying unit: TYPE 608 Number of material types: 1 Blower: 1.1 kW Capacity: 8.5 liters Voltage: 230/50 Bledpfxsyxay Is Acvjf

Condition: refurbished (used), Dry cleaner/ Friction cleaner with 110 kW drive power. Blodpfx Aoyvrzrjcvof Throughput max. 4t/h depending on type of plastic and material thickness

Condition: refurbished (used), Dry cleaner/ Friction cleaner with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness Blodpfx Acsyvrzfjvjf

Condition: refurbished (used), Dry cleaner/ Friction cleaner Bedpfx Asyvqb Rjcvslf with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness

Condition: refurbished (used), Dry cleaner/ Friction cleaner with 110 kW drive power. Bedpeyvp Rkofx Acvjlf Throughput max. 4t/h depending on type of plastic and material thickness

Condition: good (used), functionality: fully functional, Automatic stacking unit for destacking battens, boards or long goods in kiln trucks. Manufacturer Makor, type ACA 2. Equipped with 2 transfer arms. Part lengths approx. 1600 - 3000 mm (depending on part thickness), maximum part width approx. 170 mm. Installation length approx. 3000 mm. Weight approx. 1500 kg. Blodjyxyfkjpfx Acvof

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Blsdpeyvpxnjfx Acvsf Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available.

Year of construction: 2021, condition: used, Claw vacuum pump Dry Manufacturer: Edwards Bsdpfohmbkhjx Acvolf Type: EDC 150 V Suction capacity: 150 m³/h Ultimate pressure: approx. 50 mbar (abs.)

Year of construction: 2021, condition: as good as new (ex-display), Rotary vane vacuum pump- dry running Manufacturer: Becker Type: VTLF 2.250 Motor: 400V/50Hz suction capacity: 250m³/h final pressure: 200mbar (abs.) corresponds to 90% vacuum Status: New Bodpfx Ashmfraecvjlf Delivery time: ex stock

Condition: used, Year of construction: 2013, Claw Vacuum Pump Dry Manufacturer: Busch Type: Mink MM 1502 AV V8 Motor: DS 400V Suction capacity: 500/580 m³/h Ultimate pressure: approx. 200 mbar (abs.) Accessories: Intake filter; Operating instructions Bledpfx Aov I Agdocvof Delivery time: Short term

Condition: good (used), Technical data for pallet rack beam: Bjdpfjyrtklox Acvolf Racking system: SSI Schäfer Type: PR 600 Included in delivery: 01x Pallet rack beam, used Color: yellow Box profile: 80 x 50 mm Beam type: TRV1-270-085-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) 02x Safety pins, used Finish: fully galvanized For securing the longitudinal beams against accidental lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the article: This item is offered for collection only. If transport or shipment of this item is required, additional costs will apply, which can be inquired separately depending on the delivery location and scope.

Condition: new, Scope of delivery includes: 01x Base plate, second choice Material finish: galvanized Suitable for manufacturer: Dexion Type: Speedlock S4 Frame profile: S | M | H Material thickness: approx. 3.00 mm Total width: approx. 88 mm Total depth: approx. 140 mm Hole spacing (edge): approx. 38 mm Number of holes (plate): 03 pcs. Hole diameter (plate): approx. 13 mm Weight | per pc.: approx. 0.22 kg / pc. Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. If transport or shipment of this item is required, additional costs will apply. These costs depend on the delivery location and the scope of delivery and can be provided upon request. Blsdjyrr Tfopfx Acvsf

Condition: used, Length 3.500 mm Depth 1.000 mm Height 2.000 mm ca. 700 kg Bjdpfxow I Sykj Acvelf Sturdy Lübbers paint drying trolley with adjustable center rake. Available: 15 units Price per unit: € 490.00 + VAT.

Condition: like new (used), Cantilevered construction for long goods. Profiles are made of solid IPE steel. Single-sided rack with 6 supports and 24 arms Bsdpfx Aoyu S Afjcvslf 6 sets available Price: €5,000 per set Length per arm: 1,500 mm Load per arm (IPE 140): 1,500 kg Load per upright (IPE 270): 6,000 kg

Condition: excellent (used), 7.4 m Nagy PB-80 Pallet Rack With a standard pallet height of 1.20 m, you can install 6 beam levels in the 10.3 m high rack. Together with the floor-level storage spaces, this results in 7 storage levels, which, with 4 pallets per bay, provides a total of 28 pallet spaces per bay. Material & Construction: The galvanized surface offers long-lasting corrosion protection. Unlike welded frames, the bolted truss construction (diagonal and cross braces) allows for easy replacement of individual components in case of damage (e.g., from forklift impacts). Profile: The 80 x 60 mm profile dimensions are typical for medium to heavy-duty pallet rack uprights to ensure the necessary buckling stiffness at heights exceeding 10 meters. Manufacturer: Nagy Type: PB-80 Shelf length: approx. 7.40 m Upright height: approx. 10.30 m Upright depth: approx. 1.10 m Upright type: PB-80 Profile: 80 x 60 mm Frame: bolted Upright finish: galvanized Clear span: 3.60 m Crossbeam: 3600 x 120 x 45 mm Crossbeam finish: blue painted (RAL 5015) Number of bays: 2 (basic bay + 1 extension bay) Number of levels: 7 incl. floor storage space Max. pallet weight: 500 kg Permissible shelf load: 2000 kg Permissible bay load: 12000 kg Pallet spaces: 56 Scope of delivery 3 x uprights approx. 10.30 x 1.10 m galvanized 24 x Crossbeam approx. 3.60 m blue incl. locking pins Your partner for safe warehouse logistics: Assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether new installation, conversion, or warehouse closure – we handle the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) Bledpfx Asyvr Aiecvjf - Shelving for small parts and archives - Mezzanine floors for optimal space utilization Rack inspection & testing according to DIN EN 15635 Safety is a legal obligation. We conduct the annual expert inspection (according to DGUV Regulation 108-007): - Inspection for deformations and damage. - Checking of locking pins and load capacity labels. - Creation of a legally compliant inspection report including an inspection sticker. We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de You can find more pallet racking – new and used – in our shop! International shipping costs on request!