Used Drill Grinding Machine for sale (83,578)

Condition: excellent (used), Year of construction: 2011, grinding diameter 250 mm grinding length 650 mm centre height 125 mm total power requirement 13 kW weight of the machine ca. 3500 t STUDER (CH) High Precision Electrohydraulic Universal Cylindrical Grinding Machine Model S 30-1 Year 2011 19-39xx Height of centers / Grinding Ø 125 / 250 mm Center distance / Grinding length Z-axis 700 / 650 mm Workpiece weight between centers (no steady) max. 130 kg Table speeds 50 – 5000 mm/min Table way automatic, min. 1,5 mm Table reverse delay 0 – 6 s Table swivable ° Cross way X-axis 315 mm Rapid infeed way 60 mm Feeds 0,012 – 6 mm/min Spar-out time 0 – 6 s Universal Turret Wheelhead Swivable, manual B-axis 0 – 180 ° Grinding wheel dimension : bore x width x Æ 127 x 63 x 400 mm Cutting speed max. 35 m/s Internal Grinding device for spindle Ø 0 mm Workhead with hydrodynamic bearing Fitting taper / spindle bore MK 5 / 30 mm Speeds 60 / 175 / 270 / 600 U/min Spindle drive 5,5 kW Total electric load approx.. 13 kW - 400 V – 50 Hz Weight approx. 3.500 kg Accessories / Special Features: • Electrohydraulic conventional control and drives with a large variablilty and high und high resolution. • MAGNESCALE 2 axis digital read out for Z- and X- axis (linear and diameter display) • Preinstalled automatic cycles for plunge-in grinding, traverse grinding, internal grinding with roughing, finishing, fine-finishing, spark-out (also prepared for use of structure sound sensor and gauge control) • Turret wheelhead with manual B-axis 0-180° with cylindrical grinding spindle left, 5,5 kW and internal grinding spindle with oilmist-lubrication Ø 0 mm, 40.000 rpm, 1,5 kW • Workhead, hydrodynamic bearing, swivable 90°, sine ruler, aircushion • Precision tailstock with fine setting to correct for cylindricity • Machine base made of mineral catsting GRANITAN S3 for high excellent dimensional accuracy, themal stability and dampening characteristics. Ibsdpfx Aexvdrtoh Hed • Adjustable Dresser mounted on tailstock, hinged dresser for table mount, swivable dresser for table mount • Collet device with many SCHAUBLIN high precision collets Ø 1 – 25 mm • Wide range of accessories as 2 grinding wheel flanges, various internal grinding mandrels, 2 pieces face plates, balancing arbor, var. centers and mandrels, MK adapters, var. sleeves, var. covers, auxiliary pulley, large bandfilter coolant unit, manuals, etc. Condition : excellent, 7.515 hours, universal machine for all sorts of grinding tasks ! Video : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, before loading

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: C3300, grinding length: 4,500 mm, grinding width: 300 mm, table length: 4,500 mm, table width: 300 mm, space requirement height: 2,500 mm, space requirement length: 13,700 mm, space requirement width: 2,500 mm, Reform AR45 T9 ZU C3300/86 Year of manufacture: 1986 Sanding length: 4500mm Sanding width: 300mm Workpiece height: 250mm Swivel range table or sanding arm: +-90 degrees Segment head diameter: 560mm Spindle diameter in front bearing: 120mm Swivel range: 2° Max. Torque: 719,5Nm Motor: B280, 55kW Iodpfxotqtn Do Ah Hobd Grinding spindle speed range: 0-730 rpm Control system: BBC Baumüller drives Marposs measuring system Hydraul. Clamping Sanding mist extraction system: Hydrocyclone cleaning system Additional sanding unit ZU Feed rate: 2000-35000mm/min Space requirement approx. 13.7x2.5x2.5m

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, External Cylindrical Grinding Machine Manufacturer: NAXOS-UNION (Germany) Model: W500 500 x 2500 mm Year of Overhaul: 2017 Technical Specifications: • Max. distance between centres: 2500 mm (full length can be ground) • Centre height: 250 mm • Grinding wheel diameter: 600 mm • Grinding support travel: 320 mm • Max. workpiece weight between centres: 1500 kg • Grinding spindle speed, stepless: 900 – 1600 RPM • Workpiece spindle speed: 50 – 450 RPM • Workpiece spindle taper: MK5 / Morse 5 Isdpfx Ahsxcvr Sj Hobd • Motor power: 2.2 kW • Approx. machine dimensions (L x W x H): 7800 x 3300 x 1750 mm • Approx. weight: 13 tonnes Accessories included: • 1x full machine enclosure incl. front sliding door with safety switch • 2x glass scales for X and Z axes incl. digital display Z300 from RSF-Elektrik, measuring system MSA • 1x new belt filter unit by SEITZ, type PFA 100, incl. 100 l/min pump and control system • 1x electromechanical balancing system by MPM, balancing head mounted on spindle, sensor at grinding spindle bearing • 1x live centre, manufacturer RÖHM MK5 • 6x grinding wheel flanges • 7x steady rests • 14x leveling feet Condition: Completely overhauled in 2017, very little use since. Negotiation basis: Price: ex works, loaded free on truck Collection after payment received and by prior appointment. Disclaimer: The seller shall not be liable for typographical or data transmission errors. Machine condition in terms of appearance, technology and wear corresponds to its age; used equipment is sold without any warranty. All prices are net.

Condition: good (used), Year of construction: 1968, Cylindrical grinding machine, manufacturer: STANKOIMPORT, type: XC3, year 1968, with accessories. Model: 3A 161. Centre height: 161 mm, grinding diameter: 322 mm. Centre distance/grinding length: 1000 mm. In good condition. Iedpfjxq Tlrsx Ah Hsbd

Condition: good (used), Year of construction: 1996, functionality: fully functional, grinding length: 1,200 mm, grinding width: 450 mm, Internal item no.: 25085 Iedpfxjxtn Dne Ah Hjbd Surface grinding machine Rosa Linea Iron 12.6 Year of manufacture: 1996 + Magnetic chuck 1200 x 500 mm + Borazon grinding wheel (mounted) Max. grinding wheel size: 400x60x127 mm Grinding length: approx. 1250 mm Grinding width: approx. 550 mm Max. distance from grinding wheel to magnet: approx. 400 mm Dimensions (LxWxH): 4000 x 2300 x 2400 mm Weight: 5800 kg

Year of construction: 2002, condition: ready for operation (used), General Data Ibjdpfx Ajxwqtyeh Hjd Machine weight 11000 kg Control Unit Brand FANUC Main Drive Number of axis 2 Spindle motor power 24 kW This JUNKER jucam 5002/51 cylindrical grinding machine was manufactured in 2002. It features a FANUC control system, MARPOSS verification, and a robust 24 kW main drive motor. Capable of grinding lengths up to 1000 mm and diameters up to 280 mm, it supports workpieces from 20 to 80 mm. Weighing 11,000 kg, it ensures stability and precision. Contact us for more information about this machine. Application Types Grinding

Condition: new, Year of construction: 2024, Working width: 380 mm Working height: 150 mm 1. Unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with a 3 kW motor 2. Unit, brush: Scotch Brite Hard / diameter 210 mm, variable drive Isdpfx Ajtnf Rroh Hjbd Height adjustment: handwheel Height display: mechanical counter Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Vacuum conveyor belt: yes Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Condition: good (used), Year of construction: 1984, Machine is in good working codition. Isdpfjxvikuex Ah Hsbd

Condition: ready for operation (used), Year of construction: 2006, grinding length: 500 mm, grinding width: 250 mm, capacity 500×250 mm magnetic 500×250 mm 3 automatic functions Ibedpfx Ajww Eywsh Hed

Condition: good (used), Centre bore 2- 50 mm Diameter of workpiece 8 - 125 mm Lenght of workpiece 50 - 1000 mm Grinding wheel speeds 13'000 - 45'000 rpm Iedpfxerivluo Ah Hebd Misc.accessories MARCELS MASCHINEN AG

Condition: good (used), Year of construction: 2006, Internal item no.: 25061 Adjustable wet grinding machine Knopp Rundomat - N Year of manufacture: 2006 Belt size: 120 x 3000 mm Workpiece lengths: 120 - 1000 mm Includes various grinding belts, support rules, etc. Dimensions (LxWxH): 170 x 150 x 190 cm Weight: approx. 500 kg The machine is fully functional but shows significant contamination. Ijdpfx Ahjxcttye Hobd

Year of construction: 2002, condition: ready for operation (used), General Data Machine weight 11000 kg This 3-axis JUNKER QUICKPOINT 5002/10 was manufactured in 2002. It features a Siemens control system, Marposs measuring, and CNC-controlled Z-axis and grinding spindle head. With a grinding length of 1000 mm and a diameter up to 280 mm, it's ideal for precision surface grinding. Consider the opportunity to buy this JUNKER QUICKPOINT 5002/10 surface grinding machine. Contact us for more information about this machine. Ibodjxwqukopfx Ah Hod Application Types Grinding

Condition: used, dia. of draw-in collets 4 - 24 mm Iodpev Dxzpofx Ah Hobd max. radius to grind 12 mm grinding range 4 - 24 mm grinding wheel-diameter 100 mm total power requirement 0,4 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1 x 0,6 x 0,4 m Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Myford cylindrical grinding machine Max. grinding lenght : 305 mm. Max. grinding dia. : 76 mm. Iodpfx Ahsxwd Nzo Hsbd RPM : 2500 With internal grinding Coolant Delivery : 1. December 2025

Condition: reconditioned (used), Year of construction: 2015, SEEDTEC YSG-618 TS Surface Grinding Machine With 1-axis NC system ST-2 control Year of manufacture: 2015 Grinding area: 465 mm x 150 mm Ijdpfewgmy Rex Ah Hebd With the following accessories: Magnetic clamping plate 350 mm x 160 mm Electronic handwheel Paper belt filter system Machine light 5 machine mounts

Year of construction: 2016, condition: ready for operation (used), A centerless round polishing machine Loeser is available. Workpiece diameter range: 10mm-30mm, workpiece length range: 100mm-1000mm, stations: 2, working direction: left-right, magazine system with infeed and outfeed table: 1000mm/1000mm. Including magazines as well as infeed and outfeed table. Documentation available. An on-site inspection is possible. Ibedpfx Aovzbg Aoh Hod

Condition: used, Year of construction: 1992, Internal item no.: 25086 Surface Grinding Machine Zirsch & Baltrusch Formmaster 6/30 + Magnetic clamping plate 600x300 mm Attention! Ibsdpsxtn R Iefx Ah Hed The grinding spindle is noticeably louder and should probably be replaced in the near future. See video! Technical Data: Maximum grinding area: 650 x 300 mm Electromechanical cross feed: 300 mm Maximum table load: 300 kg Table clamping surface: 650 x 250 mm Maximum distance from table surface to spindle center: 600 mm Grinding wheel dimensions: 400 x 40 mm Travel X: 840 mm / Y: 310 mm Automatic infeed in Z Connected load: 8 kW Installation dimensions (LxWxH): 3500 x 2000 x 2500 mm Weight: approx. 3000 kg

Condition: used, Year of construction: 2000, controller manufacturer: Heidenhain, controller model: Heidenhain 1830 M - KELCO 120, _____ Description: Year of manuf. : 2000 Control : Heidenhain Heidenhain 1830 M - KELCO 120 Grinding length : 1000 mm In General: YOM::2000 - Retrofit 2024 Controller:Heidenhain 1830 M - KELCO 120 Workpiece headstock: Swivelling range:-10°/+100° Speed:600 rpm Centre height:250 mm Internal mounting cone:MK5 Short taper outside:DIN 55026 Workpiece weight max.:150 kg Grinding headstock: Design:Tandem grinding headstock B-axis:-210°/+30° Internal grinding device:Internal grinding spindle Grinding table (X-axis): X-axis:320 mm Max. speed:7.5 m/min Resolution:0.1 μm Lower table (Z-axis): Centre distance:1,000 mm Ibodjxwgh Hopfx Ah Hsd Z-axis:1,150 mm Max. speed:15 m/min Resolution:0.1 μm Equipment: Coolant supply:Coolant system with filter Emulsion mist separator:Mechanical Tailstock:MK4, stroke 50 mm Workpiece measurement:Marposs T25 :Tool measurement Marpos A 90 Set-up mode:Electronic handwheel Chuck:3-jaw chuck, magnetic chuck

Condition: reconditioned (used), Year of construction: 1979, functionality: fully functional, Fully rebuilt Danobat grinding machine. Disassembled, adjusted, painted, and operational. Includes various accessories. Video available for interested parties. Iodpfx Ahjxwln Ss Hobd

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1845/455, Completely refurbished: Mechanics, geometry, hydraulics, and electrical components Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, plus adjustment. New paintwork. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Ijdpfx Ahoxt Ilfj Hjbd Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal grinding attachment Disassembly, cleaning of parts, replacement of worn and defective components, installation of the support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, hose replacement, defective and worn parts replaced. Hydraulic block checked. X-Axis Disassembly, replacement of worn items such as O-rings, seals, rings, etc., overhaul of hydraulic piston, regrinding of tables. Z-Axis Disassembly, regrinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring system Digital 2-axis display included. Electrical cabinet Replacement of motor contactors and relay controls. New wiring. New variable speed drive (frequency inverter) for the workhead. TECHNICAL SPECIFICATIONS Distance between centers: 1500 mm Distance between centers (workhead to tailstock overhang): 1650 mm Center height, standard: 125 mm Center height with riser blocks: 225/250 mm Maximum grinding diameter: Ø 250 mm Maximum grinding diameter with riser blocks: 450/500 mm Table Usable surface: 2060 x 140 mm Max. length and width for surface grinding: 1750 x 200 mm Longitudinal travel, manual or hydraulic: 1750 mm Manual table movement, 1 handwheel revolution – coarse: 20.006 mm Manual table movement, 1 handwheel revolution – fine: 2.457 mm Table speed, continuously via hydraulics: up to 6 m/min Table swivelling: 6° Stop and return: 0–5 sec. Workspindle Workpiece speeds, continuously variable (electric): 20–400 rpm Swivelling: 360° Workspindle taper (internal): MT5 Tailstock Internal taper, tailstock spindle: MT3 Spindle retraction, manual or hydraulic: 30 mm Diamond dresser taper (internal): MT0 Universal grinding head Cross slide travel for wheel: 285 mm Rapid traverse for wheel slide, front and rear: 40 mm Grinding spindle speeds: 1500 – 1700 – 2200 – 3600 rpm Vertical grinding spindle movement, center heights: 125–330 mm Max. wheel for cylindrical grinding: 400 x 50 x 127 mm Max. wheel for surface grinding: 250 x 20 x 76 mm Head swivelling with locking at every 90°: 270° Wheel feed 1 division of the micrometer drum: 0.005 mm/Ø Automatic wheel feed, max.: 0.9 mm/Ø Motors Grinding spindle motor: 2,900 rpm / 4.0 hp Workspindle motor: 3,000 rpm / 2.0 hp Coolant pump motor: 2,850 rpm / 0.12 hp Internal grinding attachment Bore: 70 mm Internal grinding spindle speed Ø70 mm: 14,000 rpm Internal grinding spindle speed Ø50 mm: 21,000 rpm Subject to error or omission, the technical information is provided without obligation.

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, grinding length: 1,000 mm, grinding width: 550 mm, grinding height: 350 mm, grinding wheel diameter: 400 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12-1988 Delivery time: immediately Grinding length: 1000 mm Grinding width: 550 mm Grinding height: 350 mm Ibedpfxou Rpd Ee Ah Hed Electromagnetic chuck 1000 x 550 mm Fine pole pitch 45-5 mm Electronic straightening device with compensation Vertical digital readout Mount for grinding wheel max. 400 x 100 x 127 mm Spindle motor 7.5 kW, 1435 rpm Leveling wedges Coolant system with universal paper band filter Machine is fully functional and can be inspected under power at our warehouse. Test grinding possible by arrangement.

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, machine/vehicle number: 752588, grinding length: 2,000 mm, grinding width: 500 mm, overall weight: 12,000 kg, disc diameter: 700 mm, with magnetic clamping plate 2000x700mm due to insolvency Ibodpfxoxlaa Ee Ah Hed

Condition: good (used), Internal Item No.: 25080 No VAT can be shown, as the item is subject to differential taxation. Internal cylindrical grinding machine Overbeck 250i + Operating manual + Three-jaw chuck (workpiece holder) + Collet set (workpiece holder) Technical data: Max. clamping diameter of workpiece: 140mm Max. clamping length of workpiece (in front of spindle flange): 250mm Grindable bore length: 160mm Grindable bore diameter: 0.8–90mm Max. workpiece weight: 15kg Swing diameter under guard: 150mm Workpiece spindle speed (stepless): 112–1000 rpm Swivel range of workpiece spindle headstock: 45° Internal taper of workpiece spindle: MT4 Spindle bore: 26mm Grinding spindle speed range: 6,000–175,000 rpm Incremental infeed: 0.001–0.01 mm Power requirement: 7.3 KVA Space required: 2.8 x 2.5m Iedpfsxtndbjx Ah Hebd Weight: 1,750kg The machine comes from a training workshop in a rehabilitation clinic, and is in very well-maintained condition.

Condition: ready for operation (used), Internal Item No.: 25055 Ibedpfx Aew Ty H Aoh Hsd Surface Grinding Machine Manufacturer: Jung Model: Not specified The machine comes from a school and was used for training purposes. + Magnetic chuck (400x150mm) + Feed in X direction pneumatically and mechanically Mounted grinding wheel: D:165mm W:25mm Travel in X approx. 600mm (mechanically via handwheel) Dimensions (LxWxH): 190 x 140 x 210cm Weight: approx. 700kg

Condition: good (used), Internal item no.: 25087 Cylindrical grinding machine Schaudt AR 500 + Magnetic chuck D160mm + Internal grinding attachment! Ibodpfextpbbsx Ah Hjd Grinding length: max. 500mm Grinding diameter: max. 300mm Centre height: 150mm Centre distance: 500mm Tailstock taper: MK4 Machine dimensions (LxWxH): 2700 x 2000 x 1800mm Weight: approx. 2000kg