Used Digital Colour Printer for sale (11,680)

Year of construction: 1992, condition: used, machine/vehicle number: 1784, ITEK Graphix 985CF / Ryobi 3202MCS – 2-colour continuous forms offset press Year: 1992 Condition: used Price: €3,250 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands ITEK Graphix 985CF, the ITEK version of the Ryobi 3202MCS, 2-colour offset press for printing continuous stationery and fanfold forms. Redpozqhgdjfx Akisch The machine is equipped with tractor feed and pack-to-pack delivery. The press comes from a small printing company which ceased its activities due to serious health problems of the owner. The machine was mainly used for single-colour printing. After arrival at our warehouse, the machine was thoroughly cleaned. The machine runs and turns mechanically, but it has not printed again after cleaning. Therefore, no recent print test is available. The electronic counter is currently not working because its internal battery is exhausted. The total impression count is therefore unknown. Technical specifications * Number of colours: 2 * Application: continuous stationery / fanfold forms * Feeding system: tractor feed * Delivery: pack-to-pack * Paper width: approximately 127–356 mm / 5–14 inches * Form length: approximately 178–356 mm / 7–14 inches * Length adjustment: in increments of 1/6 inch * Maximum printing size: approximately 330 × 355.6 mm * Paper thickness: approximately 0.06–0.20 mm * Production speed: approximately 4,000–6,000 forms per hour * Dampening system: molleton * Electrical supply: 230 V, single phase, 50 Hz * Power consumption: approximately 550 W * Dimensions: approximately 1,500 × 900 × 1,410 mm * Weight: approximately 550 kg Included * Original Ryobi operating manual * Original Ryobi parts catalogue * Safety documentation * Various loose rollers * Additional trays, shafts, rods and tools * Other accessories shown in the photographs The machine is offered in its present condition and can be inspected by appointment in Son en Breugel, the Netherlands.

Condition: used, Spare parts exclusively for the Vutek GS3250 LXpro LED. - LED lamp - Motors - Electronic boards Rcedpfxez Hv I Ee Akijh - Printheads 12pl - Carriage - Ink filling parts - Everything you need!

Condition: like new (used), Year of construction: 2022, functionality: fully functional, We are offering our Chiossi e Chiavazzuti Poker 1900 textile tunnel dryer, year of manufacture 2022, for sale. The machine has been consistently serviced and is in full working order. We have always been very satisfied with the dryer and can recommend it without reservation. Delivery to your desired address, including international destinations, can be arranged for an additional fee if required. Details about the dryer: • Model: Chiossi e Chiavazzuti Poker 1900 • Year: 2022 • Location: Germany • Regularly serviced • Fully operational and ready for immediate use • Ideally suited for industrial textile drying applications Reason for sale: We are selling the dryer due to an expansion of our production facilities and no longer require the Chiossi e Chiavazzuti Poker 1900. Additional information: • The Poker 1900 is renowned for its consistent heat distribution and energy-efficient drying performance. • It is perfectly suited for companies with high production throughput and ensures dependable operation even under intensive use. Rsdpfjv Scn Nox Akioch • The machine is user-friendly and efficient, making it ideal for professional textile printing and finishing operations. Inspection and demonstration: An inspection and demonstration of the dryer can be arranged by appointment at any time. You are welcome to visit us and see the machine in operation for yourself. If you are interested, please feel free to contact us! A great opportunity for anyone looking for a reliable and high-performance textile tunnel dryer!

Condition: used, Year of construction: 2005, operating hours: 70,000 h, clamping force: 1,600 kN, displacement volume: 4,546 cm³, injection pressure: 1,778 bar, overall weight: 89,000 kg, screw conveyor diameter: 105 mm, terms of delivery: EXW (ex Works) delivery time: on request Rede Aarg Rjpfx Akijch terms of payment: 100% prior to delivery

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand 2-blade cutter/trimmer, the “Canon 2-Knife Trimmer-A1” Item for sale: 1 x Canon 2-Knife Trimmer-A1 Rjdpfx Aozxw H Nokioch Condition: This listing is for a second-hand unit, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: not inspected (used), Year of construction: 2022, Leased return. No further data available. Serial no. FPR4012012202007256 Based on the original invoice: No guarantee or warranty that this corresponds to the actual condition. Rcedezu Iupepfx Akish • 1x Markforged Onyx Pro 3D printer • EIGER Software Cloud online version included • EIGER Software Desktop online version included • Early access to new features • 1x Onyx filament 800 cm³ • 1x Glass fiber filament 50 cm³ • 3x FFF quick-change nozzle • 3x CFF quick-change nozzle • 1x Markforged Drybox for material storage Stock ID 13373665 Approximate transport dimensions: 80x60x45, approx. 30 kg

Condition: used, Year of construction: 1998, impressions 91 Mio. Rodszwqb Repfx Akioch max. printing speed sheets 15000 /h max. paper size 38 x 52 cm numbering unit + Version optional with numbering unit

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: CNEL57067, Toshiba ES-3015AC This is a Toshiba ES-3015AC photocopier in very good condition, with good copy quality and a low print count. Counter: 48,000 copies (including 10,000 black and white copies and 9,000 + 29,000 low-quality color copies) Rodpfx Akotxnkgsisch Options: PCL / PS / Send / Finisher / Large Capacity / Paper feeding unit with 2 cassettes. Technical data: Power supply: 220-240 V, 50-60 Hz CM SOLUTIONS is now one of the leading French and European companies in the purchase, sale, and refurbishment of used office equipment. By integrating transparency, expertise, and ethics into every level of our business, we offer our customers high-performance products at competitive prices. Why do our customers choose CM Solutions? - 28 years of international experience in over 50 countries - 20 machine brands: Ricoh, Kyocera, Xerox, Toshiba, Canon, Konica Minolta… - A large stock of 2000 copiers available immediately - A team of qualified technicians Do not hesitate to contact us for more information.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: documentation/manual, We offer for sale a professional digital microscope, the KEYENCE VHX-7000, a state-of-the-art device designed for detailed visual inspection, measurement, and analysis of materials and components. This microscope is ideal for industrial companies, laboratories, research institutions, quality control departments, and technical universities. 🔍 Main advantages and features: • ✅ High-resolution digital imaging Rcodez Ng Ntspfx Akieh • ✅ Advanced 2D and 3D surface imaging • ✅ Large depth of field and automatic focusing • ✅ Precise measurement of dimensions and surface analysis • ✅ Advanced lighting options and detail enhancement • ✅ Simple and intuitive operation • ✅ Capability for documentation, archiving, and evaluation of results • ✅ Suitable for quality control, research, and development 🏭 Application areas: • Automotive and mechanical engineering • Electrical engineering and electronics • Metallurgy and materials engineering • Quality control and analysis of manufacturing defects • Research, development, and laboratory measurements 📦 Device information: Manufacturer: KEYENCE Model: VHX-7000 Type: Professional digital microscope

Condition: new, WAGO 750-323 Profibus DP 12 MBd/ Digital SN 93787 -unused!- ,unused, in sealed original packaging, 100% functional, scope of delivery as per photos Rjdpez Adirjfx Akijch

Condition: new, Yokogawa UT351-01 Digital Indicating Controller with Active Color PV Display, serial number as per photo, unused, 100% functional, scope of delivery as per photos Redpfjz Adp Ssx Akisch

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 500 h, input voltage: 230 V, input current: 15 A, input frequency: 60 Hz, We are offering this very well-maintained Z Corporation ZPrinter 650 3D printer, manufactured in 2015, for sale. Voltage: 100/115/230 V Current: 15/15/8 A Frequency: 50-60 Hz Rsdszzk Ufopfx Akiech We are a workshop for people with disabilities and are selling the printer because we no longer have the demand for the products it produces. The printer has been used very little and is therefore in very good condition. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2020, - Feed - Cutting - Cleaning - Infrared heating - UV curing - Coating - Digital printing - Structuring - Excimer matting - Stacking Digital printing system Manufacturer: Hymmen Type: JUPITER - JPT C 680/548 with OFS 850 Year of manufacture: 2020 Technical data - Nominal width: 680 mm - Maximum printing width: 548 mm (expandable to 680 mm) - Maximum panel width in the OFS: 510 mm - Working height: 900 mm (+50 mm) - Processing: Printing and top coating from above, back coating from below - Operating mode: two-lane up to a max. part width of 255 mm; otherwise single-lane - System speed: 8-65 m/min - Printing speed: up to 50 m/min Jupiter digital printing unit (JPT): - Number of colors: 4 - Print heads per color: 8 (max. 10 possible) - Free slots for additional colors: 6 - Print head type: XAAR 2001 Printing unit with DLE structure: - Printing rows: 1 - Print heads per row: 8 (max. 10 possible) - Free slots for additional rows: 1 - Total print heads: 8 - Print head type: XAAR 1003 Specifications of the raw panel: - Length: 600-2800 mm - Width of the raw board before the longitudinal cutting process: 900-1260 mm - The panels are split in the longitudinal direction before digital printing and coating - Thickness: 2-12 mm (without limitations); up to 28 mm with speed limitation Cutting format saw: - Longitudinal slitting system with up to 5 saw cuts plus 2 trimming units for the production of finished panel widths of 160-510 mm Specifications for finished panels: - Length: 600-2800 mm - Width: 160-510 mm - Thickness: 2-12 mm (without limitations); up to 28 mm with speed limitation Feed system (feed): - Type: Vacuum portal - Feed stations: 2 - Discharge stations: 1 - Maximum feed rate: 8 cycles/min; with double stacking: 16 panels/min - Identical stacks per station: up to a panel length of 1550 mm = 2; =1550 mm = 1 - Maximum stack height: 1050 mm - Maximum stack weight: 5000 kg (combined) - Design: without pits - Type of transport: protective plate or pallet - Protective plate (infeed): Length 800-2800 mm; Width 1000-1260 mm; Thickness 20-30 mm (up to 150 mm for pallets); max. 80 kg per panel/pallet Stacking system (outfeed): - Type: Drop shaft - Stack positions: 1 - Maximum stacking rate: 30 cycles/min Rcedpfjzuzfzjx Akish - Identical stacks per position: up to a panel length of 1550 mm = 2; =1550 mm = 1 - Maximum stack height: 1050 mm (alternatively: 1000 mm) - Maximum stack weight: 5000 kg (combined) / Alternative stack configuration maximum stack weight: 3500 kg - Design: with pits - Type of transport: protective plate or pallet - Type of protective plate feed: loading by forklift, separation by robot - Protective plate (stacking): Length 800-2800 mm; Width 1000-1200 mm; Thickness 20-30 mm; max 80 kg per panel; Material OSB or HDF Units: - Number of units: 35 - Process steps: Feed, cutting, cleaning, infrared heating, UV curing, coating, digital printing, structuring, excimer matting, stacking Application: - Industrial single-pass digital printing line for the high-speed surface finishing of large panels (flooring and furniture), which creates realistic wood, stone, or custom decors directly onto substrates. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, For sale is a professional Stratasys Objet30 V2 3D printer, manufactured in 2013. Technical specifications / features: * Manufacturer: Stratasys / Objet Rsdpezwv E Iofx Akijch * Model: Objet30 V2 * Year of manufacture: 2013 * Printing technology: PolyJet * Build volume: approx. 294 × 192 × 148 mm * High level of detail and fine surface finish * Professional industrial-grade equipment * Original base frame on rollers Ideal for prototyping, product development, model making, design, and technical components. Used, condition appropriate for its age. Inspection possible by appointment. Collection by the buyer. Subject to prior sale and errors.

Condition: ready for operation (used), functionality: fully functional, WEISSER HEILBRONN Junior / L & Z lathe with Heidenhain digital control -Center height 220mm Rodpfozwggvex Akioch -Turning diameter over bed 440mm -Distance between centers 1000mm -Spindle bore approx. 50mm -Spindle speeds 40 - 2000 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Heidenhain digital display ND 780 -Forkardt F250 3-jaw chuck -Multifix base and inserts -Electric chuck guard -Follow rest -L & Z spindle cover -Work light -Documentation Dimensions: L x W x H 2.6 x 1.3 x 1.8 meters / Weight approx. 1800 kg Errors and omissions excepted.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, We have a Kirk-Rudy Firejet C4 inkjetsytem full colour KR519 year 2021 available. Rcsdpfxezwlbro Akioh Complete with feeder, alignmenttable, mailbase and conveyor. This machine has not been used much so now for you a chance to buy a almost new one for a used price!

Condition: ready for operation (used), Konica Minolta Accurio Press C 4070, with 1.3 million copies, fully equipped, in good condition, tested, and ready to print. Equipment: - DF 713 - UK 112 - PF 707 m - HT 506 - FS 532 m - RU 518m - Fiery IC 409 - VI 515 As an experienced retailer of used copiers, we have developed a genuine expertise in packing and pallet/container shipping to guarantee that our customers receive machines in perfect condition. Our company offers the largest range of production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information. Rcjdpezh Hnbefx Akioh

Condition: ready for operation (used), Konica Minolta Accurio Press C 4070 with 1.8 million copies, fully equipped, in good condition, tested, and ready to print. Equipment: - DF 713 - UK 112 - PF 707m - HT 506 - FS 532 m - RU 518 m - HT 511 Rcsdpfx Aezh Hqpokieh - Fiery IC 609 As an experienced retailer of used copiers, we have developed genuine expertise in packing and pallet/container shipping to guarantee that our customers receive machines in perfect condition. Our company offers the largest range of production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: new, turning length 1000 mm turning diameter 400 mm turning dia. in gap 560 mm spindle bore 52,0 mm turning speeds 45 - 2.000 U/min bed width 210 mm spindle taper 55029 D 1-5 taper in tailstock 4 MK quill travel 100 mm total power requirement 2,0 / 2,4 kW weight of the machine ca. 810 kg. range L-W-H 1.890x800x1.600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 90 mm - Follow-on steady rest - passage diameter max. 70 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears Rodpfexaau Sjx Akiech - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Operating tool

Condition: good (used), PLC control, digital output, PLC expansion module -Manufacturer: Siemens, Simatic ET 200eco PN Digital Output Module -Type: 6ES7 142-6BR00-0AB0 6ES7142-6BR00-0AB0 Rcjdpfxjxu U U Nj Akijh -Number: 7 modules available - Price: per piece -Dimensions: 175/60/H50 mm -Weight: 0.9 kg/pc

Condition: good (used), PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S5 Digital Input Digital Input 2 pieces with bus module Rsdpfswpgmiex Akioch -Type: 6ES5 421-8MA12 -Bus module: Siemens 6ES5 700-8MA11 -Number: 5x double module available -Price: per piece -Dimensions: 165/100/H125 mm -Weight: 0.7 kg/piece

Condition: used, Designation: 3D Printer Selective Laser Melting Machine Manufacturer: SLM Solutions AG Model: SLM 280 HL Build Volume: 280 x 280 x 365 mm (minus substrate plate height) Machine Configuration: Single Optic, 1x 400W Materials Used: (1.4404, 1.2709, L40, AlSi10Mg) Laser Operating Hours: 1500 h Build Rate up to 88 cm³/h: depending on material and part geometry Variable Layer Thickness: 20 μm - 90 μm Minimum Feature Size: 150 μm Focus Diameter: 80 - 115 μm Max. Scan Speed: 10 m/s Average Shielding Gas Consumption during Build Process: 3.0 l/min (argon) Rcjdpfxswpkcns Akijh Average Shielding Gas Consumption during Flooding Process: 200 l/min (argon) Electrical Connection / Power Consumption: 400 Volt 3NPE, 63 A, 50/60 Hz, 3.5 - 5.5 kW Compressed Air Requirement / Consumption: 60 l/min at 6 bar Machine Dimensions: 2600 mm x 1200 mm x 2700 mm Condition: Used item as shown in the pictures. Please contact us if you have any questions. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please request shipping costs outside Germany). Sale to commercial customers only, without warranty or guarantee. Technical data may vary and errors in the description may occur and are subject to change.

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 398, control type: manual, degree of automation: manual, actuation type: hydraulic, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, input frequency: 50 Hz, type of input current: three-phase, overall weight: 900 kg, cutting length (max.): 150 mm, Equipment: angle stop, foot remote control, Cutting performance (90° notch) - Normal steel: 4.0 mm - Stainless steel: 3.0 mm Cutting angle: 30-120° Cutting length: 150 x 150 mm Working height: 900 mm Table: 1000 x 650 mm Motor power: 3.0 kW Weight approx. 900 kg Dimensions: 1250 x 1000 x 1160 mm (LxWxH) Equipment: - Angle adjustment 30° - 120 ° continuously - 2 digital displays for the adjustable stops Rcjdpfx Aevk I Avskioh * Set-up stroke * Single stroke * Continuous stroke - Plexiglass protection for better transparency - Hardened blades also for cutting stainless steel - Adjustable stroke height setting - Removable cutting container - Freely movable foot switch BOSCHERT angle adjustment: - the one-piece 30° The upper blade is directly connected to both a left and a right lower blade within a tool - for each notch over 30°, the notch is made once to the left and once to the right. - the swivel adjustment is carried out pneumatically immediately after the first notch has been completed. The machine can be demonstrated on site with power on. All information is provided without guarantee. Subject to errors and prior sale.

Condition: excellent (used), machine/vehicle number: 9056423, WITH COLOR RIBBONS Rsdovf Ifaopfx Akisch Config. No.: 096-104-00404 Equipment / Additional information: Maximum Print Area: Width: 3.4”/86mm Length (with standard memory): 39”/991mm Resolution: 300dpi/12dots/mm Maximum Print Speed: 8”/203mm per second Label and liner width: 0.79”/20mm– 3.54”/90mm Ribbon width: 0.79”/20mm– 3.4”/87mm

Condition: used, Year of construction: 2018, 3D printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Rcsdovtftqjpfx Akieh Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm