Used Deckel Maho Dmu 80 T for sale (343)

Condition: used, Year of construction: 2002, x-travel 750 mm y-travel 600 mm z-travel 520 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 87 Nm tool taper HSK-A63 table surface area 700 x 500 mm Swivel range B-Axis 0 - 180 ° Swivel range C-Axis 0,001 ° max. table load 350 kg center hole 30 H6 mm T-slots 7x 14H7 x 63 mm table turning speeds 21,5 rpm number of toolpositions 32 pos. max. tool length 315 mm max. tool diameter 105 mm max. tool-dia with free toolbox 130 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 50 / 50 / 50 m/min feed speeds 20.000 mm/min Feed force X / Y / Z: 8 / 8 / 7 kN total power requirement 50 kVA weight of the machine ca. 8,5 t dimensions of the machine ca. 6,5 x 3,5 x 3,5 m 5 Axis-CNC-Machining Center DECKEL MAHO - DMU 70 eVolution - 5 Axis - NC-Swivel-Rotary-Table - Operating-Hours: Power-On: ca. 62.500h / Spindle: ca. 15.100h Kwedeuntmdspfx Ah Eeu

Condition: good (used), Year of construction: 2004, operating hours: 64,500 h, functionality: fully functional, machine/vehicle number: 1505709006, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, rotational speed (max.): 42,000 rpm, number of slots in tool magazine: 60, swivel angle B-axis (max.): 180 °, Machine in good condition, measurement protocol available TECHNICAL DETAILS Travel X: 750 mm Travel Y: 600 mm Travel Z: 520 mm Table Clamping surface: Ø 700 × 500 mm Central/max table load: 350 kg NC rotary-swivel table: 700 × 500 mm B-axis: 180° C-axis: 360° Spindle Spindle speed: 42,000 rpm Tool holder: HSK E50 Spindle cooler: available Control CNC control: HEIDENHAIN iTNC 530 Electronic handwheel: available Preparation for 3D probe HEIDENHAIN TS 641: without probe BA: 4 Tool management Tool changer: 60 positions Speed Rapid traverse: 50 m/min MACHINE DETAILS Machine dimensions (L × W × H): 3,200 × 2,650 × 2,800 mm Machine weight: 9 t Total power requirement: 50 kVA Power supply: 400 V Operating times Power-on hours: 141,300 h Spindle hours: 64,500 h Control on time: 146,100 h EQUIPMENT - 5-axis simultaneous HSC machining center - NC rotary-swivel table with B and C axes Kedewrz Nwepfx Ah Ejwu - Chip conveyor present - Electronic handwheel for manual operation - Laser for tool measurement - Prepared for 3D probe HEIDENHAIN TS 641 - Oil mist extraction integrated - Spindle cooling available - No internal coolant (IKZ) available

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 3500 mm Measurements depth 3000 mm Measurements height 2500 mm Main Drive Kwedpfx Aox D I Ibsh Esu Spindle speed range 18000 Tool taper HSK-63A Number of axis 4 Movement X-Axis Movement 630 mm X-Axis Rapid Traverse 26,000 mm/min Y-Axis Movement 560 mm Y-Axis Rapid Traverse 26,000 mm/min Z-Axis Movement 560 mm Z-Axis Rapid Traverse 20,000 mm/min Table Table load 400 kg Tools Number of index 20 This 4-axis DECKEL MAHO DMU-60T was manufactured in 2005. It features a robust vertical machining centre with X, Y, Z travels of 630 mm, 560 mm, and 560 mm respectively. Equipped with a high-speed spindle up to 18,000 rpm and a HSK-63A taper, it ensures precision and efficiency. The machine includes a Heidenhain MillPlus CNC control and a 20-tool magazine. Consider the opportunity to buy this DECKEL MAHO DMU-60T vertical machining centre. Contact us for further details regarding this machine. Application Types Milling

Condition: used, x-travel 500 mm y-travel 400 mm Ksdpfsv Td Elox Ah Ejwu z-travel 400 mm

Condition: good (used), Year of construction: 2005, DMC 80U duoblock, year of manufacture 2005, CNC MillPlus IT, spindle 18,000 rpm, SK40 taper, 60-position automatic tool changer (ATC), coolant through spindle, serial no. 1147 000022 3, power-on hours: 42,344, spindle hours: 23,544 Kjdpfoxy T Hnex Ah Eswu

Condition: good (used), Year of construction: 2004, DMC 80 U, year of manufacture 2004, CNC MillPlus IT, spindle 18,000 rpm, SK40 taper, coolant through spindle, ATC 60 positions, machine number 1120 000170 3, power-on 41,449 h, spindle hours 21,015 h. Kwjdpfx Ahoxy Tybe Esu

Condition: good (used), Year of construction: 2001, MACHINE SPECIFICATIONS Control: HEIDENHAIN Machining area: X axis: 500 mm Y axis: 420 mm Z axis: 380 mm Main drive: Speed range: 20 – 18,000 rpm Power (40/100% ED): 35/25 kW Torque (40/100% ED): 130/87 Nm Feeds: Working feeds (X/Y/Z): 20-20,000 mm/min Rapid traverse (X/Y/Z): 50 m/min Work table (B+C axes): Table dimensions: Ø 500 x 380 mm Maximum weight on table: 200 Kg T-slots (Number / Size / Tolerance): 7 / 14 mm / H7 C-axis travel: 360º (resol. 0.001º) B-axis travel: 180º (resol. 0.001º) Machine: Machine dimensions (LxWxH): 2,683 x 5,353 x 2.470 mm Machine weight: 5.020 Kg Taper: Taper type: SK 40 (DIN 69871 A) Electrical connection: Kwjdpfx Ahexq Hb Tj Eeu Phases | Frequency | Voltage | Power: 3N | PE~50-60Hz | 400/230V | 40 kW Accessories: Cooling fluid through the chuck Automatic tool changer: ATC-32 - Maximum tool weight / Maximum tool diameter: 6 Kg / 200 mm Chip evacuator Electronic handwheel: HR-410 High capacity cooling system: Interlit SUK-200-900 Equipped with Reninshaw probe interface: probe included

Condition: ready for operation (used), Year of construction: 2002, Technical details: X travel: 1,250 mm Y travel: 710 mm Z travel: 710 mm Table area: 1,500 x 800 mm Table load: 800 kg Spindle speed: 12,000 rpm Spindle motor: 15 / 10 kW Control: iTNC HEIDENHAIN Kjdpfjxq S Ncsx Ah Ejwu Spindle taper: SK 40 Tool changer: 40 positions Power consumption: 44 kVA Machine weight approx.: 10 t Space requirements approx.: 3.5 x 2.65 x 2.65 m 5-axis simultaneous machining center, B-axis (-120° / +30°), NC rotary table integrated in rigid table, direct measuring system, 3D probe Through-spindle coolant 20 bar, 600 l, Rinsing gun, Chip conveyor, Approx. 44,973 operating hours / 20,542 spindle hours

Condition: excellent (used), Year of construction: 2000, Hello I have for sale a Deckel Maho DMU 60T machining center Control: Heidenhain 430 Kwodpfx Aetyk Hmjh Eeu Technical condition of the machine - perfect Year of production: 2000 Country of Manufacture: Germany Machine parameters: Axis travel "X" : 630mm "Y" axis travel: 560mm Z" axis travel 560mm Torsion head Maximum spindle speed 18,000 rpm. Tool storage: 24pcs(2x12 tools) Heidenhain measuring scales on all axes Walking through spindle Chip conveyor High-pressure cooling system central lubrication hydraulic tool clamping spindle taper SK40 Full programming instructions Documentation Included in the price loading and transport by forwarding within the country The price also includes training in programming and operation of the machine We take care of all procedures related to obtaining leasing Stal-Com company for 17 years we are engaged in sales, service and training on CNC machines from DMG group. We specialize in all models of Gildemeister lathes and Deckel Maho Machining Centers. All machines undergo a meticulous technical inspection. In addition to customers from Poland, our machines are also bought by customers from all over Europe and parts of Asia. Each machine can be checked during production as we also do machining. After purchasing a machine from our company, we provide training for the crew as well as we can set up the production of details at the customer's site. We cooperate with many companies on a permanent basis to which we provide further machine tools.

Condition: used, DECKEL MAHO DMU 60T Kjdpfswg Df Djx Ah Ejwu HEIDENHAIN 426 – worktable dimensions (length x width): 900 x 500 mm – table load: 350 kg – maximum feeds in the X/Y/Z axes: 600/525/ 500 mm

Condition: good (used), Year of construction: 2000, Hello I have for sale a 5 axis CNC milling center DECKEL MAHO DMU 50 V evolution. The machine is connected and working. _ Type: 5 axis milling center Manufacturer: DMG DECKEL MAHO Model: DMU 50 V evolution Control: HEIDENHAIN TNC430 Country of manufacture: Germany Year of manufacture: 2000 Kjdjtt Ntfjpfx Ah Ejwu _ Machine parameters: - number of axes: 5 - working table dimensions (length x width): 500 x 380 mm - maximum spindle speed: 18,000 rpm - spindle power: 15 kW - X/Y/Z axis travel: 500/420/380 mm - C/B axis travel: 180/360 degrees - maximum feed rate: 20 m/min - total power: 40 kVa - machine dimensions (L x W x H): 2800 x 2300 x 2600 mm - total weight: 6000 kg

Year of construction: 2000, condition: excellent (used), I have for sale a Deckel Maho DMU 100T machining center Control: Heidenhain MillPlus Technical condition of the machine - Very good Year of production: 2000 Country of Manufacture: Germany Machine parameters: Axis travel "X" :1080mm "Y" axis travel: 710mm "Z" axis travel 710mm Torsion head Maximum spindle speed 12,000 rpm. Tool storage: 32pcs(2x16 tools) High-pressure cooling Spindle cooling Heidenhain measuring scales on all axes Kwjdpolffzcefx Ah Eeu Chip conveyor central lubrication hydraulic tool clamping Spindle taper SK40 Full programming manual Documentation Machine weight 10t. Included in the price loading Stal-Com company for 17 years we are engaged in sales, service and training on CNC machines from DMG group. We specialize in all models of Gildemeister lathes and Deckel Maho Machining Centers. All machines undergo a meticulous technical inspection. In addition to customers from Poland, our machines are also purchased by customers from all over Europe and parts of Asia. Each machine can be checked during production as we also do machining. After purchasing a machine from our company, we provide training for the crew as well as we can set up the production of details at the customer's site. We cooperate with many companies on a permanent basis to which we provide further machine tools. Stal-Com Rafał Dziendziel

Condition: good (used), Year of construction: 1996, operating hours: 35,000 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, rotational speed (max.): 18,000 rpm, overall weight: 4,000 kg, For sale is a 5-axis machining center of the DMU brand and type 50 5 The machine comes from a vocational school, is in good condition and very well maintained Please note in particular that the spindle has only 2,000 hours, 18,000 rpm and the IKZ system Technical data Year of construction: 1996 Operating hours: 35,000 h Spindle replacement: 33,000 h Spindle hours: 2,000 h Spindle holder: SK 40 Control: Heidenhain Mill Pluss Max. speed: 18,000 rpm Working range x/y/z: 500/380/380 mm Rotary table: 500*380 mm Installation dimensions L/W/H: approx. 4,000/5,200/2,400 mm Weight: approx. 4,000 kg On request, for an extra charge, can be delivered throughout Europe Prices plus VAT Kwsdpfsry Tn Eex Ah Eju Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a 3+2-axis CNC machining center, type Deckel Maho DMU50M. The Heidenhain TNC310 contouring control (also available with Siemens 810D!) makes the DMU a fully-fledged CNC machine for both production and training applications. Due to the absence of a tool changer and the conveniently positioned maintenance doors, the DMU50M requires very little space and can be positioned almost directly against a wall. The machine has been thoroughly tested in our workshop, is therefore in excellent condition, and is ready for immediate use. We look forward to receiving your inquiry! Delivery time: immediately available Machine no. xxxx Year of manufacture: 2002 Control: Heidenhain TNC310 or Siemens 810D (including Shopmill) Table design: Rotary and tilting table Speed: 20-4500 rpm, continuously programmable Feed rate: 0-5000 mm/min, continuously programmable Travel ranges X/Y/Z: 500/400/400 mm Tool holder: SK40 Tightening system: pneumatic Handwheels: 3-axis electronic / B+C axes mechanical Weight: approx. 2800 kg Further equipment and accessories: upon request Our service promise to you: - We are a certified master machine shop - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the selected machine Kwodpfx Ahov Sy Sfe Eju - About the paint color of the selected machine You can decide freely. - If you wish, you can order additional accessories such as tools, etc. directly. - If you wish, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation.

Condition: ready for operation (used), Year of construction: 2001, - USED - 5-AXIS VERTICAL MACHINING CENTRE WITH ROTARY AND TILTING TABLE X-AXIS TRAVEL: 500 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 400 mm SPINDLE: 9000 rpm; 13 kW; HSK 63 Kjdpjwl R Dqofx Ah Eewu B-AXIS: -10° +95 ° C-AXIS: 360 ° TABLE SIZE: 700 x 500 mm MAX ADMITTED LOAD: 200 Kg TOOL MAGAZINE: CHAIN-TYPE ; 16 POS CONTROL UNIT: HEIDENHAIN WEIGHT: 3000 Kg OVERALL DIMENSIONS: 2000 x 1520 x 2140 mm ACCESSORIES: SWARF CONVEYOR NOTE: MANUAL 5th AXIS

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025703124, Used 5-axis machining centre with double table Manufacturer: DECKEL MAHO Model: DMU 70VL Year of manufacture: 2001 Kedpfxeyk S Hpo Ah Ejwu

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 L • Measuring probe • Chip conveyor Kedpfxsymcvms Ah Eswu • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63

Condition: excellent (used), Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rotary table diameter: 1,500 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, Heidenhain iTNC 530 control Kwsdpfow Ngk Hsx Ah Eeu Tool changer for 60 tools Automatic head 180/-7° stepless

Condition: like new (used), Year of construction: 2010, operating hours: 32,498 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece width (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, overall weight: 5,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Cooling Cooling through the Spindle Center bar: 40 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Kjdpjyi Dnijfx Ah Eswu Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: excellent (used), Year of construction: 2012, operating hours: 18,648 h, CNC controller: Heidenhain ITCN 530 ERGOline Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360° (0,001º) B-axis degrees: –5° a +110° (0,001º) Rapid traverse m/min: 24 Worktable Table dimensions mm: 630 x 500 Maximum workpiece size (D x H) mm: 500 x 400 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18.000 Spindle drive power kW: 13 / 9 KW (40 / 100% ED) Tool system Tool holder: SK 40 Tool magazine slots: 30 Max. Tool Length mm: 300 Max tool weight kg: 6 Equipment Chip conveyor Kodpfx Aow Rnxzoh Eswu Workarea light Paper band filter Rotating viewing window with laminated glass Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 L Machine running times Under power: 18.648 Rated power kVA: 34 Operating Time: 6.226 Basic machine dimensions / weight Length mm: 2.800 Width mm: 2.800 Height mm: 2.600 Weight kg: 4.450

Condition: like new (used), Year of construction: 2000, operating hours: 33,831 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: '3D contouring control Millplus, workpiece weight (max.): 1,000 kg, total length: 7,000 mm, total width: 3,500 mm, overall weight: 3,902 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 15,000 W, Year of construction: 2000 CNC controller: '3D contouring control Millplus Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Max. workpiece weight kg: 1000 max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Tool changer: Doeble gripper Equipment Kwedpfexvrbisx Ah Eju Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rated power kVA: 55 Basic machine dimensions / weight Length mm: 7000 Width mm: 3500 Height mm: 3902

Condition: like new (used), Year of construction: 2009, operating hours: 47,443 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, number of slots in tool magazine: 180, controller manufacturer: Siemens, total height: 2,900 mm, total length: 4,950 mm, total width: 5,060 mm, overall weight: 14,000 kg, table length: 630 mm, table width: 800 mm, controller model: 840D-Powerline, torque: 980 Nm, coolant supply: 40 bar, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, spindle motor power: 32,000 W, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rotational speed (max.): 8,000 rpm, spindle speed (max.): 10,000 rpm, table load: 1,000 kg, operating hours of spindle: 22,963 h, CNC controller: Siemens 840D-Powerline Axes X-axis travel mm: 800 Y-axis travel mm: 800 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø800x630 Max. workpiece weight kg: 1000 Table rotation speed rpm: 8000 max. torque Nm: 980 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 180 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Signal lamp Kwodpfjui Np Rex Ah Eou 3D quickSET Machine interface for FASTEMS system Paper band filter Machine running times Under power: 47443 Spindle Working: 22963 Basic machine dimensions / weight Length mm: 4956 Width mm: 5064 Height mm: 2900 Weight kg: 14000

Condition: reconditioned (used), Year of construction: 2016, With Siemens 840 D sl Operate CNC control Year of manufacture: 2016 Travel ranges: X 400 Y 400 Z 375 mm Spindle speed range: 20 – 20,000 rpm, stepless Including the following accessories: NC rotary tilting table 450 mm x 400 mm incl. table cooling 60-position tool changer with double gripper (HSK 63) 3D touch probe Heidenhain Electronic handwheel ICS 40 bar with paper band filter Scraper-type chip conveyor Bed flushing Kwedpsylpa Nefx Ah Eou Active cooler for control cabinet Spindle cooling: water circulation cooling Rotoclear Direct path measuring system Blow air through the spindle center 3 height-adjustable machine feet Operating manuals

Condition: ready for operation (used), Year of construction: 2001, operating hours: 16,799 h, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMC 80 U hi-dyn was manufactured in 2001. It features a rotary speed of up to 12,000 rpm, a B-axis automatic swivel milling head, and a C-axis NC rotary table measuring 900 x 630 mm. The machine includes a 60-position tool magazine, Heidenhain control system, dual pallet changer, and an internal coolant supply at 40 bar. Consider the opportunity to buy this DECKEL MAHO DMC 80 U hi-dyn universal machining centre. Contact us for more information. • B-axis automatic swivel milling head • C-axis NC rotary table: 900 x 630 mm • Tool magazine: 60 positions • Heidenhain control system Additional equipment • Dual pallet changer • Coolant temperature control system • Chip conveyor • Internal coolant supply 40 bar • Paper belt filter • Rotating viewing window • Cleaning gun Kjdpfex H U D Rex Ah Eswu • Oil and emulsion mist separator Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale DECKEL MAHO DMU 100 T machining centre – 5 continuous axes: Description: CNC vertical machining centre with 5 simultaneous axes, designed for complex precision parts machining (mould making, aerospace, automotive, etc.). Technical specifications: - Model: Deckel Maho DMU 100 T - CNC control: Heidenhain iTNC 530 - Axes: X / Y / Z + B rotation + A rotation (simultaneous 5-axis machining) Axis travels: - X-axis: approx. 1050–1150 mm - Y-axis: approx. 710–750 mm - Z-axis: approx. 710 mm Spindle and tooling: - Spindle speed: Up to 18,000 rpm - Spindle power: approx. 28 kW - Tool mounting: SK 40 - Tool magazine: 32 positions Table and capacity: - Type: Integrated NC rotary table - Dimensions: approx. 800 x 800 mm Kwodpfx Ahsyc Tzlj Eeu - Max load: 500–800 kg Dimensions and weight: - Machine weight: approx. 9,500–10,000 kg - Dimensions: approx. 3500 x 2500 x 3000 mm (L x W x H) I remain at your disposal for any further information.