Used Deckel Maho Dmu 50 M for sale (322)

Condition: repair required (used), Year of construction: 2002, operating hours: 54,981 h, functionality: not functional, machine/vehicle number: 1114 000273 3, travel distance X-axis: 1,080 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Haidenhain, controller model: HEIDENHAIN TNC 530, total height: 2,500 mm, total length: 6,200 mm, total width: 3,802 mm, table width: 795 mm, table length: 1,500 mm, table load: 900 kg, overall weight: 9,500 kg, operating hours of spindle: 14,170 h, spindle nose: SK40, number of slots in tool magazine: 32, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, Technical Details Machine: DMG DMU 100T Year of manufacture: 2002 Control: HEIDENHAIN TNC 530 Spindle taper: SK40 Operating hours: 54,981 h Travel paths: X-axis: 1,080 mm Y-axis: 710 mm Z-axis: 710 mm Weight: approx. 9,500 kg Additional equipment: - NC rotary table (Nikken) - Large NC rotary table - Tailstock - Electronic handwheel Inspection Viewing under power is possible by prior appointment at any time. Condition: Used condition appropriate to age and previous usage. Known defects: - Ball screw of the X-axis worn / overhaul required Todpfjxxamxsx Ahuef - Y-axis likely cable or motor defect Repairs carried out: 2017 – Retrofit kit for handwheel 2022 – Replacement of screw conveyor in chip conveyor 2024 – New cylinder/linear guide for tool magazine 2024 – New monitor Further defects cannot be ruled out. Important note / disclaimer The machine is expressly sold as defective, without warranty, without guarantee, and with the exclusion of any liability for material defects. All technical details have been provided to the best of our knowledge, but are not binding. No responsibility is taken for completeness, accuracy, or timeliness of the information. The sale is made as seen and excluding any subsequent negotiation.

Condition: reconditioned (used), Year of construction: 2004, With MILL PLUS iT CNC control Year of manufacture: 2004 Travel distances: X 1000 Y 1000 Z 1000 mm Speed range: 0 – 8,000 rpm stepless (SK 50) Including the following accessories: - NC rotary table 900 mm x 700 mm clamping surface (table load max. 1.4 t) - Universal milling head with controlled B-axis - Universal tool changer with 40 magazine slots, double gripper (SK 50) - Fully enclosed safety cabin with sliding doors and interior lighting - Coolant high-pressure system – 40 bar - Chip conveyor - Rotoclear - 3D probing system Heidenhain TS 641 - Operating modes 3 + 4 - Electronic handwheel - Chip-blowing pistol - 50 tool holders SK 50 - 3 height-adjustable machine mounts Tsdpfx Ajxn Aibjhuef - Transport device - Operating manuals

Condition: excellent (used), Year of construction: 2005, Type: DMU 80T2 Year of manufacture: 10/2005 Control: Heidenhain 3D path control iTNC-530 Clamping surface: 1250 x 700 mm (fixed table) Working area: X: 980 mm Y: 630 mm Z: 630 mm Tjdpfx Asxz Rhlohuef Spindle speed range: 20 – 12,000 rpm Feed rate: 0–10 m/min Tool changer: 32 magazine positions SK 40 Machine hours: Control on: 33,814 h Machine on: 29,764 h Program run: 8,237 h

Condition: used, Year of construction: 2008, x-travel 750 mm y-travel 600 mm z-travel 520 mm tool taper SK40 control i-TNC 530 weight of the machine ca. ca. 9 t DMGDMU 70 Built in 2008 5-axis universal milling machine DMU 70 Travel range X/Y/Z 750/600/520 mm 24 m/min rapid traverse Spindle speed 14,000 rpm Tool holder SK 40 according to DIN 69871 Tool changer 30 magazine slotsTool measurement Tjdpfxexv Eale Ahujf Blum laserInfrared probe Heidenhain TS 640 Control Heidenhain iTNC 530

Condition: like new (used), Year of construction: 2012, operating hours: 23,252 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: 3D-Control Siemens 840D, workpiece diameter (max.): 840 mm, workpiece weight (max.): 600 kg, total height: 2,897 mm, total length: 3,567 mm, total width: 2,615 mm, table width: 650 mm, table length: 650 mm, overall weight: 12,100 kg, spindle speed (min.): 18,000 rpm, tool length: 315 mm, tool weight: 8,000 g, Year of construction: 2012 CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 735 Y-axis travel mm: 650 Z-axis travel mm: 560 C-axis degrees: 360º (0,001) A-axis degrees: ±120(0.001) Feed rates m/min: 40 Rapid traverse m/min: 40 Acceleration in the axes m/s2: 6 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø650 Maximum workpiece size (D x H) mm: Ø840x500 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 13/9 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tsdpfexrr I Ijx Ahuef Tool system Tool holder: SK 40 Tool magazine slots: 30 Tool changer: Double Gripper With free neighboring places mm: 160 Max. Tool Length mm: 315 Max tool weight kg: 8 Chip-to-chip time s: 4.9 Equipment Electronic Handwheel Chip conveyor Rigid table with integrated rotary table Infrared probe Internal cooling lubricant supply Rinsing gun Paper band filter Machine running times Under power: 23252 Spindle Working: 6497 Basic machine dimensions / weight Length mm: 3567 Width mm: 2615 Height mm: 2897 Weight kg: 12100

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tsdpfsxvw Hqsx Ahuef Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 1998, functionality: fully functional, DECKEL MAHO - DMU 125 T Tsdsxtmpiepfx Ahujf Offer Details Stock number: 1039-8700 Machine type: Vertical Machining Centre Manufacturer: DECKEL MAHO Model: DMU 125 T Year of manufacture: 1998 Control: Heidenhain TNC 426 Location: D-59302 Oelde, Germany Country of origin: Germany Delivery time: by arrangement Freight terms: ex-site Additional information: CNC Vertical Machining Centre DECKEL MAHO - DMU 125 T - ICS (internal coolant supply) WE OFFER YOU: • Workshop-inspected machines • Free loaded onto truck • NO auction fees • Delivery possible (at extra cost) • Unloading and commissioning (at extra cost) Technical Details Travel paths: X-axis travel: 1,250 mm y-axis travel: 880 mm z-axis travel: 800 mm Control: Heidenhain TNC 426 Main spindle: • Spindle speed range: max. 12,000 rpm • Main spindle drive power: 15 / 10 kW • Max. torque: 500 Nm • Tool holder: SK 40 Worktable: • Clamping surface: 1,500 x 1,050 mm • Max. table load: 2,500 kg • Number of T-slots: 10 • T-slot width: 18 H7 mm • T-slot spacing: 100 mm Tool changer: • Number of tool pockets: 30 positions • Max. tool diameter: 80 mm • Max. tool diameter with adjacent pockets empty: 160 mm • Max. tool length: 315 mm • Max. tool weight: 8 kg • Max. total tool weight: 100 kg Feed rates: • Rapid traverse (X / Y / Z): 15 m/min • Feed rate: 10,000 mm/min Total power consumption: 29 kW Machine weight approx.: 16.0 t Space requirements approx.: 7.0 x 5.0 x 3.3 m Accessories • Documentation • Chip conveyor • Coolant system • High-pressure cooling • Internal coolant supply • Tool changer • Touch probe (Heidenhain) • Electronic handwheel

Condition: reconditioned (used), Year of construction: 2006, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With MILL PLUS iT path control system Year of manufacture: 2006 Travel paths: X 800 Y 800 Z 800 mm Spindle speed range: 0 – 8,000 rpm, stepless (SK 50) Including the following accessories: - NC rotary table, 900 mm x 700 mm clamping surface (maximum table load 1.4 t) - Universal milling head with controlled B-axis - Universal tool changer with 40 magazine stations, double gripper (SK 50) Todpfexn Aczex Ahujf - Fully enclosed guard cabin with sliding doors and interior lighting - ICS – 40 bar (internal coolant supply) - Chip conveyor - Rotoclear - 3D tactile probe Heidenhain TS 641 - Operating modes 3 + 4 - Electronic handwheel - 50 pcs. tool holders SK 50 - 3 height-adjustable machine feet - Transport device - Operating manuals

Condition: used, Year of construction: 2008, x-travel 450 mm y-travel 400 mm z-travel 480 mm control MillPlus IT V600 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 Nm tool taper SK 40 swivellable B: -95 / +30 ° Tjdpju Dbpmofx Ahuef table surface area Ø 450 mm T-slots 7x 14 x 63 mm max. table load 250 kg rotatable C: 360 ° max. workpiecediameter 380 mm max. workpiece height 670 mm number of toolpositions 16 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 8,0 kg feed speeds max. 30.000 mm/min rapid traverse 30 m/min Feed force ( X / Y / Z ) 7 / 13 / 10 kN total power requirement 27,6 kVA weight of the machine ca. 5,2 t dimensions of the machine ca. 3,1 x 3,0 x 3,0 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 40 monoBLOCK - 5-axis simultaneous - only ca. 589h Spindle-hrs.! Operating-Hours: ca. 1.700h - from training center

Condition: ready for operation (used), Year of construction: 1999, Control Unit Brand HEIDENHAIN Model 426 This 5-axis DECKEL MAHO DMU 80P was manufactured in 1999. It features a Heidenhain 426 control system, a 30-slot tool magazine, and a SK 40 toolholder type. The spindle cooling is capable of 40 bar, enhancing its performance for complex machining tasks. Consider the opportunity to buy this DECKEL MAHO DMU 80P universal machining centre. Contact us for more information about this machine. Todpfx Ajxn Uyfehujf Application Types Milling

Condition: good (used), Year of construction: 2012, operating hours: 51,149 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 600 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 600 kg, spindle speed (min.): 18,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 120, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Pallet changer including 2 pallets 630x630 Control: Siemens 840D HSK63 spindle, 18,000 rpm Tool magazine for 120 tools Measuring probe: Heidenhain 3D quickSET preparation Four-color signal light Blow air through spindle center Scraper belt chip conveyor with slotted screen Internal coolant supply with 980L tank Rinsing gun for chip flushing Operating mode 4 C-axis: direct drive, integrated balancing system Extended chip flushing Swiveling tool laser measurement Operating hours: 51,149h, spindle hours: 26,121h Spindle NEW from Kessler including measurement protocol Viewing windows NEW, bellows NEW OPTION Milling / Turning package NC rotary milling table, C-axis with direct drive and integrated balancing system Motor spindle 20-18,000 rpm Power: 35/25 kW (40/100% duty cycle) Tool holder HSK-A63 Spindle clamping for turning mode Reinforced cabin version for FD Tjdpfjxv Ak Uex Ahujf 3D probe for turning tools Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and expert assembly – all from a single source. Billing based on individual terms and contract period. Contact us for your personal offer.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 36109, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 6,000 m/min, rapid traverse Y-axis: 6,000 m/min, rapid traverse Z-axis: 6,000 m/min, nominal power (apparent): 16 kVA, total height: 2,000 mm, total length: 3,000 mm, total width: 2,800 mm, table width: 480 mm, table length: 800 mm, table load: 530 kg, rotational speed (min.): 31 rpm, rotational speed (max.): 5,000 rpm, overall weight: 2,800 kg, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Neat machine, still runs smoothly and produces precise work. The machine can be inspected in operation. Tsdpjxt Nlysfx Ahujf

Condition: good (used), DMU 60P hi-dyn, power-on 37,732 h, spindle 22,802 Tsdpfoxy T Ulex Ahusf

Condition: excellent (used), Year of construction: 2002, Machining Centre - Universal Deckel Maho DMU 60 T Year of manufacture: 2002 Number of axes: 5 (3+2) Technical specifications: Travel paths: X-axis: 630 mm Y-axis: 560 mm Z-axis: 560 mm Magazine positions: 24 SK 40 NC rotary table integrated into fixed table. Clamping surface: 600 x 1000 mm Diameter: 600 mm Table weight: 800 kg Number of T-slots: 8 / 1 T-slot width: 14 H12 / 14 H7 Tsdpexqfw Tofx Ahujf T-slot distance: 63 mm Max. table load: 350 kg Rotatable C: 360° 5 axes - Controlled NC swivel milling head (B axis) - Rotary table integrated into fixed table (C axis)

Condition: used, Year of construction: 2005, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° max. workpiecediameter 850 mm max. workpiece height 550 mm Todpfx Asvn Ur Eehuef number of toolpositions 32 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool weight 8,0 kg change-time chip to chip 10 sec feed speeds max. 30.000 mm/min rapid traverse 30 m/min Accelaration 5 m/s² total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 6,5 x 5,0 x 2,9 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Axis) - only 6.100h Spindle Hours

Condition: ready for operation (used), Year of construction: 2004, operating hours: 40,000 h, Control Unit Brand HEIDENHAIN Model Mill Plus Main Drive Spindle speed range 18000 Number of axis 3 Movement X-Axis Movement 880 mm Y-Axis Movement 630 mm Z-Axis Movement 630 mm Tools Type of tool holder SK40 Tsdpfx Ahsxulb Houef This 3-axis DMG DECKEL MAHO DMU 80T was manufactured in 2004. It features a high-speed spindle at 18,000 RPM, internal coolant supply with 40 Bar pressure, and a 32-station tool changer. The machine includes SK 40 tool holders and a Rotoclear viewing window. Ideal for demanding machining tasks, consider the opportunity to buy this DMG DECKEL MAHO DMU 80T vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2000, operating hours: 1,600 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 6,300 rpm, overall weight: 5,500 kg, spindle speed (max.): 6,300 rpm, Universal Machining Center Deckel Maho DMU 80T Year of manufacture: 2000 Control: Heidenhain Operating hours: approx. 1,600 h Technical specifications: Spindle speed: 0 - 6,300 rpm Spindle torque: Tool holder: SK 40 Magazine capacity: 24 positions X-axis: 800 mm Y-axis: 650 mm Z-axis: 550 mm Equipment: - Coolant system (KSS) - 30 SK 40 tool holders - 1x machine vice Tedpfx Ahowq Dmcsuof The machine is in very good condition and has seen very little use.

Condition: used, Year of construction: 2002, Technical details: x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm weight of the machine ca.: 6,5 t Number of axles: 5 St. spindle turning speed range: 18.000 U/min numbers of tools in magazin: 24 tool taper: SK 40 Round Table B-Axis Tjdpjxn Swnofx Ahusf *

Condition: good (used), Year of construction: 2005, DMC 80U duoblock, year of manufacture 2005, CNC MillPlus IT, spindle 18,000 rpm, SK40 taper, 60-position automatic tool changer (ATC), coolant through spindle, serial no. 1147 000022 3, power-on hours: 42,344, spindle hours: 23,544 Tjdpfxsxy T Hnj Ahuef

Condition: used, Year of construction: 1998, x-travel 1.250 mm y-travel 880 mm z-travel 800 mm control TNC 426 Heidenhain Tjdpfjxp Ry Dox Ahuef turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 table surface area 1.500 x 1.050 mm max. table load 2.500 kg number of T-slots 10 T-slot - width 18 H7 mm T-slot - distance 100 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg rapid traverse ( X / Y / Z ) 15 m/min feed speeds 10.000 mm/min total power requirement 29 kW weight of the machine ca. 16,0 t dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T - ICS

Condition: ready for operation (used), Year of construction: 1996, operating hours: 23,198 h, Control Unit Brand DECKEL MAHO Model Millplus V400 Main Drive Tjdoxr Rztopfx Ahuof Number of axis 3 This 3-axis DECKEL MAHO DMU 60T was manufactured in 1996. It features a 24-position tool changer, an NC rotary table, and a spindle speed up to 6300 rpm. The working areas are 600 mm in length, 525 mm in width, and 500 mm in height. It includes a coolant system with a 150-liter capacity. Consider the opportunity to buy this DECKEL MAHO DMU 60T vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2004, DMC 80 U, year of manufacture 2004, CNC MillPlus IT, spindle 18,000 rpm, SK40 taper, coolant through spindle, ATC 60 positions, machine number 1120 000170 3, power-on 41,449 h, spindle hours 21,015 h. Todpfjxy Tybjx Ahuef

Condition: used, Year of construction: 1999, x-travel 1.250 mm y-travel 880 mm z-travel 800 mm control TNC 430 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 table surface area 1.500 x 1.050 mm max. table load 2.500 kg number of T-slots 10 T-slot - width 18 H7 mm T-slot - distance 100 mm number of toolpositions 60 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg rapid traverse ( X / Y / Z ) 15 m/min feed speeds 10.000 mm/min Todpexmagnjfx Ahuof total power requirement 29 kW weight of the machine ca. 16,0 t dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T

Condition: ready for operation (used), Year of construction: 2012, operating hours: 14,297 h, Control Unit Brand Heidenhain Model iTNC 530 Main Drive Spindle speed range 18000 Number of axis 5 Movement X-Axis Movement 735 mm Y-Axis Movement 650 mm Tjdpfx Asxpyygohujf Z-Axis Movement 560 mm Tools Type of tool holder SK40 Additional Equipment Magnetic plate 3D infrared probe This 5-axis DECKEL MAHO DMU 65 monoBlock was manufactured in 2012. It features a vertical machining center with an 18000 rpm spindle and a 3D infrared probe. The machine dimensions are X: 735mm, Y: 650mm, Z: 560mm. Ideal for complex and precise machining tasks, the DECKEL MAHO DMU 65 monoBlock machine we have for sale. Contact us for further details regarding this vertical machining center. Application Types Milling

Condition: good (used), Year of construction: 2016, CNC MillPlus IT V610 – ERGOline, spindle 18,000 rpm, taper SK40, ATC 120 positions, coolant through spindle, SN 11690001133, weight 9,460 kg, power-on hours 20,295 h, spindle hours 8,688 h Tsdpfx Ahjxyi Dpeuef