Used Cutter Machine for sale (65,407)

Condition: like new (used), operating hours: 12 h, KILIA 65 Liter Meister Plus – factory-reconditioned by HELTEK | KILIA For sale is a KILIA 65-liter high-speed cutter / Meister Plus, which undergoes complete factory reconditioning at HELTEK | KILIA. This is not a simple repair or cosmetic refurbishment. The machine is completely disassembled and rebuilt from the ground up, both technically and visually. The goal is to achieve a condition that consistently aligns with the current machine standards of HELTEK | KILIA. The 65-liter cutter is ideal for butcher shops, meat processing plants, and industrial food processing operations. Technical data: Manufacturer: KILIA Model: Meister Plus / High-speed cutter Bowl capacity: 65 liters Batch processing capacity: approx. 46 kg per batch Main motor: 22 kW Knife shaft speed: approx. 50–5,100 rpm Reverse / mixing speed: approx. 50–500 rpm Plate speed: approx. 7–20 rpm Knife and plate drive: continuously variable, frequency-controlled Voltage: 400 V / 50 Hz Total electrical connection power: approx. 28 kW Customer-side fuse: 50 A Control: modern PLC Operation: 7-inch HMI touch panel Central lubrication: yes Scope of the HELTEK | KILIA factory reconditioning The machine is completely disassembled, except for the base frame. As part of the reconditioning, the following work is carried out, among other things: new base plate, professionally welded in machine frame completely refurbished and blasted stainless steel areas refurbished or glass bead blasted base frame with high-quality new powder coating 22 kW main motor new or completely overhauled and certified by Siemens new motor tensioning device made of stainless steel plate shaft drive new or completely overhauled and certified by the manufacturer plate shaft bearing completely new new bearings and new bearing seats for the plate shaft bearing new knife shaft new knife shaft bearing new electronic central lubrication system new wear parts new scrapers, guides and sliding elements made of food-grade blue POM electrical system and control completely new The electrical equipment is also comprehensively modernized: new PLC control new 7-inch HMI touch panel new frequency inverters new contactors and relays new cables and wires new or revised sensors modern safety technology complete rewiring This gives the machine modern control and drive technology with good spare parts availability and high serviceability. Ljdpfx Akjz A Ufzjwsah Factory-reconditioned instead of just used You will receive the extremely robust basic structure of a proven KILIA cutter, combined with modern control, drive and safety technology. Proven KILIA quality. Modern HELTEK technology. Ready for many more years of production. After completion of the factory reconditioning, the machine is completely inspected and subjected to a FAT – Factory Acceptance Test. Warranty We provide a 6-month warranty on the factory-reconditioned machine in accordance with our terms and conditions. The knife shaft bearing is excluded from the warranty. Inspection and machine acceptance / FAT can be arranged at HELTEK | KILIA. Transportation, installation and commissioning can be offered on request.

Condition: used, DECKEL S11 universal tool & cutter grinder under power in our warehouse Ljdsphvlaepfx Akwsah Mimu machine-tools (Italy)

Condition: used, Plasma cutting unit HYPERTHERM, Type Max 100 Plasma cutter with machine torch Machine No. 70-2513, Year of manufacture 1990 Power: 100 Amps = 80% duty cycle 89 Amps = 100% duty cycle Cutting capacity: up to 32 mm material thickness Adjustment range: stepless Hose package length: 22 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 63 Amps plug - Hose package with machine torch (hand torch without switch) - Spare nozzles for the plasma cutting torch - Separate push button switch for starting the plasma cutter Space requirement L x W x H: 850 x 700 x 1100 mm Laedpfxoyah Sae Akwoh Weight: 225 kg Good condition Ideal for retrofitting to an oxy-fuel cutting machine.

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Lajdpfxsz R Rbds Akwjh Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC.

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) Lsdpfx Akjyxy S Rswjah - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Laodpsz Iz Imjfx Akwjh Manufacturer: Apollo Model: 4AX 2030 Year of manufacture: 2021 Condition: used Machine type: CNC Router If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Laodpjyah R Nefx Akwoh Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: excellent (used), Year of construction: 2023, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, Lasdpfez Srv Dox Akwjh 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: excellent (used), SECO Minimaster holder MM 12-20 150.4 (28657) Slot milling cutter in case with 4 inserts MM 12-12008 RO8 P 40 Ljdpfew Iczxsx Akwsah

Condition: excellent (used), Year of construction: 2019, The machine is in very good condition – the latest model is designed for poultry slaughter and initial processing, ensuring a capacity of 13,500 birds per hour. Technical Specification Model: 20x6" Capacity: 13,500 birds/hour Live weight: 1.2-4.0 kg Number of units: 20 Shackle pitch: 6" Length (X): 2508 mm Height (Y): 2985 mm Width (Z1): 1693 mm Iebttsv Au Nge Shdfoar Width (Z2): 3092 mm Laedpfx Akjwdic Ajwsh Width (Z3): 2580 mm Weight: 1535 kg Water consumption: 1.0 m³/h Water connection: High pressure: 40 bar; Medium pressure: 8 bar; Low pressure: 2-3 bar Water inlet: 3/8" BSP Drain connection: DN100 BSP

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: Laedpoz St Uzsfx Akwsh – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards – operation tools – hardened pressure plate

Condition: used, PARPAS Type AU engraving tool grinding machine Manufacturer's No. 854/36 Year of manufacture 1971 Grinding wheel diameter 100 mm Grinding spindle speed approx. 3500 rpm Motor power approx. 0.55 kW Mains connection 380 volts, 50 Hz - Collet chuck (DECKEL system with S20x2) - Collet chuck Ø 15.0 mm - Diamond grinding wheel dresser for the face of the grinding wheel Ledpfsdzp T Tsx Akwjah Space requirement L x W x H 700 x 350 x 450 mm Weight approx. 80 kg good condition

Year of construction: 2000, condition: good (used), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Technical Specifications: Maximum sheet size: 740 x 1040 mm Minimum sheet size: 350 x 400 mm Maximum speed: 8,000 sheets/hour Maximum cutting force: 250 tons Operating hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide 2 cutting chases 1 cutting plate (4 mm) Centerline system Micrometric adjustment device (for 1 mm plates) C.U.B.E. system Lajdpfx Aksyz Adnjwjh Stripping section 1 set of stripping frames (quick locking) including tools Non-stop delivery Condition: Machine is in good working condition Inspection under production possible upon request _____ Key Advantages: Reliable and proven BOBST technology High cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for quick job changeovers Well-maintained machine with relatively low operating hours _____

Condition: good (used), EBA 551-06 Paper Cutting Machine The machine is in very good condition. A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, bookbinding shops, and digital printers. Equipped with programmable controls, it is designed for low-volume, frequently changing orders. Control: Program storage capability Data entry via a decimal keypad Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Lodpoz Rk Nmjfx Akwjah Machine diagnostics with on-screen error indicator Program start with the „start” button MM/INCH switching Hydraulic knife and pressure beam drive Photocells Cutting line Side tables Foot pedal for pressure adjustment Safety guards on the rear table Technical data: Cutting length: 550 mm Infeed depth: 570 mm Stack height: 95 mm Front table depth: 460 mm Minimum final offcut: 32 mm Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 350 kg The set includes: spare knife, cutting stick, operating tools, instructions.

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines. Laedpoz Rk N Tofx Akwjh

Condition: used, Plasma cutting unit Harris Type Plasma Cutting H 35 A Machine No. Year of manufacture approx. 1994 Lsdsxciumjpfx Akweah Output 35 Amp. Cutting capacity approx. 4 mm Torch package length approx. 7 meters Compressed air connection approx. 6 bar - with pressure reducer Power supply 380 Volt, 50 Hz Space requirement (L x W x H): 550 x 400 x 960 mm Weight approx. 50 kg Good condition

Condition: used, Year of construction: 1994, workpiece diameter 110 mm Lajdpfx Ast Hw Nmokweh grinding length 410 mm clamping length 20 mm total power requirement 0,25 kW weight of the machine ca. 500 kg dimensions of the machine ca. m Profile Tool Grinder for Chamfer Angles, accessories

Condition: used, Year of construction: 1977, max. grinding diameter 400 mm grinding width 0 mm max. module min. module total power requirement 3 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Lasdpfxjt Hwnve Akwsh Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features * Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunately the machine does not have many accessories. It would therefore be a good investment as a second machine if you already have suitable accessories available.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 300 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 260 mm, total height: 1,800 mm, total length: 1,650 mm, total width: 1,150 mm, wire diameter (max.): 18 mm, workpiece height (max.): 400 mm, workpiece width (max.): 580 mm, workpiece length (max.): 580 mm, type of input current: three-phase, table width: 600 mm, overall weight: 1,700 kg, table length: 600 mm, table height: 380 mm, empty load weight: 1,400 kg, warranty duration: 12 months, table load: 300 kg, input voltage: 400 V, quill travel distance: 80 mm, quill diameter: 6 mm, quill stroke: 80 mm, stroke length: 80 mm, tank capacity: 110 l, cutting speed: 600 mm/min, input current: 6 A, positioning accuracy: 2 mm, Equipment: documentation/manual, Digima DK7732 CNC EDM Wire Cut Machine – 320 × 400 mm Product Description The Digima DK7732 is a compact CNC EDM wire cutting machine designed for precise machining of small and medium-sized metal components. It is suitable for tool rooms, mould and die production, maintenance workshops, precision engineering companies, as well as single-piece and batch production. The machine provides an X/Y working travel of 320 × 400 mm, a 380 × 600 mm worktable, a maximum workpiece height of 400 mm, and a maximum permitted workpiece weight of 300 kg. Its rigid construction and machine weight of 1,400 kg help reduce vibration and support stable, repeatable machining. EDM wire cutting technology allows the machine to produce accurate contours, narrow slots, holes and complex shapes in electrically conductive materials, including hardened metals that may be difficult to process using conventional cutting tools. Main Advantages CNC-controlled EDM wire cutting machine Compact design suitable for smaller production areas X/Y worktable travel of 320 × 400 mm Large 380 × 600 mm worktable Maximum workpiece height of 400 mm Maximum workpiece weight of 300 kg Stable 1,400 kg machine construction Suitable for complex contours and precision components Designed for mould, die and tool production Suitable for single-piece and serial production Low operating energy requirements Reduced molybdenum wire consumption Suitable for long, continuous machining cycles Technical Specification Parameter Specification Brand Digima Model DK7732 Machine type CNC EDM wire cut machine Condition New Worktable dimensions 380 × 600 mm X/Y worktable travel 320 × 400 mm Maximum workpiece height 400 mm Taper capability 6° / 80 mm Maximum workpiece weight 300 kg Machine net weight 1,400 kg Machine dimensions 1,650 × 1,150 × 1,800 mm Control system CNC/MNC Movement method Linear control Control method Open-loop control Processing accuracy 0.01–0.02 mm Molybdenum wire diameter Ø0.13–Ø0.18 mm Maximum wire speed 600 m/min Maximum cutting speed 200 mm²/min Best surface roughness ≤ Ra 0.8 µm Maximum working current 6 A Rated power 2 kVA Water tank capacity 110 litres Water filtration accuracy 0.005 mm Lsdpfx Asznttdjkwjah Application Electrically conductive metal materials With a stated processing accuracy of 0.01–0.02 mm, cutting speeds of up to 200 mm²/min, and a best surface finish of up to Ra 0.8 µm, the DK7732 is suitable for applications where dimensional accuracy and surface quality are important. Stable and Economical Operation The DK7732 is designed for stable processing, relatively fine surface quality, low energy consumption and reduced molybdenum wire wear. It is particularly suitable for users who prioritise economical operation and long continuous machining cycles rather than exceptionally high cutting productivity. Delivery and Availability Availability: available Estimated delivery time: approximately 90 working days Transport and installation conditions: to be agreed individually Availability and delivery information should be confirmed before placing the final order. Why Choose the Digima DK7732? The Digima DK7732 combines a practical working range, rigid construction, high workpiece capacity and economical EDM technology. It is a suitable solution for companies looking for a compact wire cutting machine for accurate machining of moulds, dies, tools and specialised metal components.

Condition: used, Bertuetti Universal Dough Cutter. In working condition. With two dusters. Belt 400mm wide Ljdpfx Ajtpvt Tokwsah One additional cutter included. Price € 590 We can organise shipping if you require this service

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats Lodpfxoz Dtb Dj Akwoah – operating tools – hard sheet metal

Condition: good (used), Fountain industrial bagging machine, suitable for the automated weighing and packing of fresh produce and other food products into bags. Laodpfx Akjzzzm Eewjh Designed for use within a commercial food-processing/packing environment and suitable for integration with an upstream weighing or feeding system.

Condition: used, Year of construction: 1982, x-travel 0 mm y-travel 0 mm table length 600 mm table width 400 mm total power requirement 2 kW weight of the machine ca. 1500 kg Laedpfx Ajt Hwr Uskwoh

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Lsdszrnkropfx Akwsah Distance Between Centres:1750mm Control: Prototrak SLX Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: new, Fully automated block cutting machine for pallet legs. Maximum length of raw material 6m. The machine suits all type of pallet production. OKKR-2006 can operate as a separate standing machine or as part of a production line. How does it work? The machine is fed block material on the chain infeed conveyor. The material is fed automatically and the machine cuts the blocks into the preinstalled length. OKKR-2006 can be programmed to cut several different lengths of blocks from the original piece of raw material. Maximum length of the raw material is 6m. Asssembled block size: Min / max length: 600 mm - 6000 mm Width min / max: 75 mm - 150 mm Thickness min / max: 75 mm - 100 mm Specifications Operators | 0 Length | 7,5 m Width | 2,5 m Lajdpfswdutmex Akweh Height | 1,8 m Power | 7 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 450 L/min Should be filled and controlled | Lubrication points Machine capacity | 36 blocks/min Standard equipment | 1 electric motor for saw blade 1 electric motor for material infeed 1 electric motor for chain infeed Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.