Used Ctp Computer To Plate for sale (16,805)

Condition: good (used), Year of construction: 2005, Marking and surface plate 1000 x 1000 with base frame Location: from stock 54634 Bitburg - available immediately - Iijdpfx Aowqx Axoaceh

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on a solid base frame, with vice Ijdpfx Aajxm Sagecsih -Clamping surface: 2000 x 1000 mm -Table height: 925 mm -Plate thickness: 115 mm -Vice: clamping jaws: 150 x 30 mm clamping width 250 mm -Transport dimensions: 2480/1000/H1110 mm -Weight: 1850 kg

Condition: new, Year of construction: 2019, sheet width 2050 mm plate thickness 2 mm strokes per minute until 38 cutting angle 1,75 ° table height over floor 870 mm total power requirement 3 kW weight of the machine ca. 1520 kg range L-W-H 2,2 x 0,6 x 1,2 m Demo machine at a special price: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Iisdpfxovn Al Hs Aacoh Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille. Plus freight + packaging 270,--. This is a demonstration machine at a special price, so we are selling it without any warranty. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2009, sheet width 3050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 18 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm work height max. 770 mm Control SP 8 total power requirement 7.5 kW weight of the machine ca. 4800 kg. range L-W-H 3650 x 2100 x 1750 mm very little use (!!) from a maintenance workshop Features - Guide-railed electro-hydraulic guillotine shear - HACO control model NC SP 8 * Easy operation directly at the cutting table * Adjustment of cutting angle + backgauge * Retraction function from rear stop * Electric cutting length limitation * Emergency stop button, locking - Motor-adjustable and programmable rear stop Iodoxmakgopfx Aacsih - Electric/hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front - 1x side stop - 1,000 mm, with scale & T-slot - Front finger guard - 1x freely movable foot switch - Rear safety guard + sheet metal chute - Operating instructions (PDF)

Year of construction: 2022, condition: used, New: Yes Colour: White Iiedsuighcjpfx Aacjh Empty weight: 350 kg CE mark: yes Reference number: 1 Delivery terms: EXW Production country: KR Please contact Ö. Inalkac for more information ACP5R is 350kg excavator mounted vibration plate compactor with hydraulic rotation. ACP5R is suitable for 6-12ton excavator. Available from Netherlands. Contact us for details. Verdichter, Compacteur, Puristin, Kompaktor, compactador, Zagęszczarka, Þjöppur, Komprimator, Цомпацтор, Συμπιεστής, Compattatore, Trilblok

Condition: used, Electro sinus magnetic plate, sinus magnet, E-sinus magnetic clamping plate. Length: 255 mm, width: 130 mm, height: 120 mm. Voltage: 110 V DC. The magnet can be swiveled up to 90° and features a sinusoidal support surface. Net weight: 29 kg. Isdpoxcimiefx Aacjih

Condition: excellent (used), Year of construction: 1995, Schroeder HS 2000/1.0 Manual Guillotine Shear Specifications: Iijdpfx Ajwhf Ntjaceh Manufacturer: Schröder Model: HS 2000/1.0 Year of Manufacture: 1995 Working Length: 2000 mm Cutting Thickness: 1.25 mm Collecting Tray Rear Paralleling Device via Handwheel Location: Arrives at Warehouse 54634 Bitburg - Available at Short Notice -

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1200 mm -Table height: 735 mm -Plate thickness: 125 mm Iisdpfx Aaexm R S Uoceh -Transport dimensions: 2000/1400/H735 mm -Weight: 2220 kg

Condition: new, sheet width 2050 mm plate thickness 3 mm strokes per minute until 35 cutting angle 2,0 ° table height over floor 870 mm thickness at "Niro-steel" 2 mm total power requirement 4 kW weight of the machine ca. 1550 kg range L-W-H 2,5 x 1,57 x 1,21 m The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. Iodpfx Aajvdfmxscoih • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1967, total length: 3,500 mm, total width: 1,400 mm, total height: 1,600 mm, Empty weight: 4.500 kg Price: On request - Year: 1967 - Documentation available: No - Serial number: 3058 Iiodpfoxhcgmjx Aacsh - Max. sheet thickness: 7mm - Top roll diameter: 220mm - Max. working width: 1500mm - Number of rolls: 3 - Control: Conventional - Transport dimensions: 3500mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2021, total width: 1,000 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Angles plate ASQUITH - HT-35/10 MACH-ID 9260 Make: ASQUITH Type: HT-35/10 Year: 2021 Number of T slots: 14 Jump from T to T: 250mm T size: 28mm Number of matching pieces:1 Length: 1200mm Width: 1000mm Height: 3500mm Ijdpfx Aoxhgg Djaceih Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Electro sinus magnetic chuck, sinus magnet, E-sinus magnetic clamping plate BRAILLON type BJP. Length: 350 mm, width: 150 mm, height: 110 mm. Connection: 110 Volt DC. Power: 0.65 Amp. The magnet is tiltable up to 90° and features a sine table base. Net weight: 45.8 kg. Iiedsxcimcopfx Aacjh

Condition: good (used), Year of construction: 2021, 1 used motorized plate bending roll Manufacturer: Akyapak Model: ASM 140-12/5 Year of manufacture: 2021 Technical specifications Sheet width: 1250 mm Sheet thickness: 5.5 mm Pre-bending: 5.0 mm Iodoxnpwxjpfx Aacjih Roll length: 1280 mm Minimum diameter: 210 mm Top roll diameter: 140 mm Weight: 1365 kg Dimensions (LxWxH): 2,020 x 900 x 1,200 mm Standard equipment: – Central rolls driven by electric motor, planetary gearbox, and gear drive – Side-opening top roll – Main motor with brake system – Cone bending device – Mobile control panel and foot pedal – CE mark / Declaration of Conformity

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: clamping plate with T-slots, for hydraulic press, eccentric press... -Clamping surface: 630 x 500 mm -Inner diameter: 180 mm -Plate height: 75 mm -Groove width: 19 mm Iisdjxm R Ipjpfx Aaceh -Dimensions: see drawing in the photos -Dimensions total: 630/500/H75 mm -Weight: 162 kg

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Ijdstq I Rqepfx Aaceih Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Machine dealer with own stock of 1600 m².

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Travel paths Longitudinal movement (X-axis): 5,500 mm Vertical movement (Y-axis): 3,200 mm Spindle movement (Z-axis): 600 mm RAM/Outrigger movement (W-axis): 600 mm Feed rates X, Y, and Z axes: 2,800 mm/min Spindle unit Spindle power: 37 kW Boring spindle diameter: Ø 125 mm Spindle sleeve diameter: Ø 240 mm Spindle taper: SK50 Isdpfsxn Al Aex Aaceih Number of gear stages: 4 Spindle speed range: 3–700 rpm Faceplate diameter: Ø 1,000 mm Faceplate speed range: 1–82 rpm Gear stages Stage I: 3–33 rpm Stage II: 30–85 rpm Stage III: 88–247 rpm Stage IV: 250–700 rpm Connection data Operating voltage: 3 × 400 V Mains frequency: 50 Hz Total connected load: 80 kW Dimensions and weight Machine footprint: approx. 8 × 5 m Total height: approx. 5.5 m Machine weight: approx. 50,000 kg Features and accessories Robust, flat-bed horizontal boring mill in moving column design, in very good condition Retrofit including electrical system in 2014 Refurbished control panel with Heidenhain digital readout Coolant tank with belt filtration system, high and low pressure pumps Counterweight for weight compensation Conventional control Thread cutting device with change gears Axis drives via intermediate gearbox Swiveling control panel for operation from the front or rear of the machine Telescopic steel cover for X-axis Scope of delivery excludes foundation plates and rotary table Chip conveyor included in delivery

Condition: excellent (used), Year of construction: 2021, total width: 1,500 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Number of T slots: 14 Jump from T to T: 250mm T size: 28mm Number of matching pieces:2 Length: 1200mm Width: 1500mm Height: 3500mm Iisdpsxhgfmofx Aacjh Weight: 7000kg

Condition: new, Year of construction: 2025, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, roller diameter: 95 mm, - Capacity 1270 x 3 mm - Conical rolling Iedpsxn Rrqjfx Aaceih - Swing-out top roll - Foot pedal operation - Brake motor - Emergency stop - Documentation - 400V

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 6922191908, controller model: Cybelec D-Touch-7, working width: 4,100 mm, sheet thickness (max.): 6 mm, back gauge: 1,000 mm, overall weight: 10,470 kg, TECHNICAL DETAILS Max. working width: 4,100 mm Max. sheet thickness: 6 mm Iijdpfxsxgdl Io Aaceh Backgauge: 1,000 mm MACHINE DETAILS Control type: Cybelec D-Touch-7 Dimensions & Weight Dimensions (L x W x H): 5,100 mm x 2,300 mm x 2,400 mm Motor power: 11.0 kW EQUIPMENT Pneumatic sheet support CE marking

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, Iisdpjtnlz Hjfx Aacsh -T-slot plate: clamping plate with T-slots for hydraulic press, eccentric press -Clamping surface: 705 x 484 mm -Inner diameter: 250/220 mm -Plate height: 65 mm -Groove width: 22 mm -Dimensions: see drawing in the photos -Dimensions total: 705/484/H65 mm -Weight: 147 kg

Condition: good (used), functionality: fully functional, Type: gosmeta 3-roll plate bending machine Maximum rolling length: 2100 mm Estimated rolling thickness (S235) over the entire length: between 8 and 10 mm Exact value not known, as the nameplate is unreadable Top roll diameter: 190 mm Lower roll diameter: 170 mm Rolling speed: 5.3 m/min Lower rolls: powered Drive: electric Side: fold-away for removing edge-bent products Shafts for profile rolls: 3 × Ø 90 mm Foldable side for removing closed cylinders. Equipped with emergency stop wire around the machine. Profile rolls or special segment rolls can be mounted on the 3 × Ø 90 mm shafts. Machine dimensions: length 360 cm x width 120 cm x height 140 cm Weight approx. 2800 kg Isdpfx Aasxmvhzjcsih

Year of construction: 2018, condition: used, Serial number: 1302xxxx Please contact ATS Norway for more information Iiodpfxsvgzv Ij Aacjh Please provide reference number upon request: 19196 Description: Ammann 538 kg vibrating plate for sale. It has stood for less than a year since it was new and not used at all. Everything must work as it should Ready for delivery.

Condition: used, A used well preserved guillotine shear Vöest Alpine cutting length: 2010 mm cutting capacity in steel up to 370N/mm² tensile strength: 5 mm strokes per minute: 50 H/min Hold down pressure: 30 bar number of hold-downs: 8 pcs. Iiedpfx Aaepgmpdeceh backgauge manually adjustable: 950 mm throat depth: 150mm dimensions: LxWxH 280x190x140cm weight: 2500 kg

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: with support ribs, on a solid base frame Iedpfowclciex Aaceih -Clamping surface: 800 x 800 mm -Table height: 930 mm -Plate thickness: 25 mm -Transport dimensions: 800/800/H930 mm -Weight: 235 kg

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate comes from: a WOTAN drilling machine -compatible with: Linear actuator ID 22786 -Travel: 1110 mm -Clamping plate: 1000 x 1260 mm (rotatable) -Plate is: Solid Isdpod E Hk Hefx Aaceih -Groove width: 21 mm -Dimensions: 2470/1070/H885 mm -Weight: 2200 kg