Used Corner Connection Machine for sale (73,254)

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, Gedpfxoq R Tnzs Aivjbu spindle speed 8000rpm, spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, swarf auger.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Gjdpfxozg D I Ae Aivobu NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: used, Year of construction: 2008, workpiece height (max.): 40 mm, controller model: PowerControl P85, working width: 1,550 mm, working length: 4,175 mm, TECHNICAL DETAILS Working area, X-axis: 4,175 mm Working area, Y-axis: 1,550 mm Maximum workpiece thickness: 40 mm Number of working areas: 2 Traverse speed, X-axis: 80 m/min Traverse speed, Y-axis: 80 m/min Traverse speed, Z-axis: 30 m/min Table system: Beam table with vacuum cups Number of vacuum cup beams: 8 Positioning: CNC-controlled Drilling unit Position: Top Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 10 Milling unit Position: Top Controlled axes: 4 + Flex5 Motor power: 15 kW Cooling: Liquid cooling Tool changer: Automatic Sawing unit Position: Top Tool magazine: 2 slots Tool magazine 1: 18 slots Position of tool magazine 1: Rear of the machine Tool magazine 2: 10 slots Position of tool magazine 2: On the machining head MACHINE DETAILS Control system: PowerControl P85 Machine programming software: WoodWOP 5.0 EQUIPMENT Beam table with vacuum cups 8 vacuum cup beams Vacuum pump Automatic tool changer Liquid cooling PowerControl P85 control system WoodWOP 5.0 machine programming software Gjdez Ekfvopfx Aivobu Note: Tools not included The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Gbjdpfx Aexghngoivsu Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: excellent (used), Year of construction: 2023, Distance between Centres 1000mm, Gedpfsxz Dqgox Aivobu Swing 360mm, Swing over cross-slide 225mm, Spindle Speed 50-4000rpm, 52mm spindle bore, Prototrak RLX control, toolpost, 3 jaw chuck, Coolant, interlocked guards

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Trotec SpeedMarker 156Wx Industrial Laser Marking System Brand: Trotec Model: SpeedMarker 156Wx Type: Industrial Laser Marking System Application: Permanent marking, engraving and identification of industrial components Available for sale is a Trotec SpeedMarker 156Wx, a professional industrial laser marking system from Trotec Laser. Gsdpfxez Hzvhe Aivebu The SpeedMarker series is designed for high-quality, permanent marking and identification of a wide range of industrial components and products. It is suitable for applications including product identification, serial numbers, barcodes, QR codes, logos, text, part numbers and traceability markings. The SpeedMarker 156Wx is particularly suited to industrial and manufacturing environments where accurate, repeatable and permanent marking is required. Typical Applications: - Industrial component marking - Serial number and part number marking - Barcode and QR code marking - Logo and branding - Product identification - Traceability marking - Metal component marking - Engineering and manufacturing applications - Tool and equipment identification - Permanent asset marking Device was removed from IMA manufacturing line that was never commissioned. Marking system is in "as new" condition. Sold as seen in images.

Year of construction: 2018, condition: good (used), Bagging line consisting of Incline Conveyor with Flights and product speed control Weigher 4 Dispensing Buckets PLC Controller for complete system Gbjdpfxoinbhtj Aivju In good working order

Condition: used, Year of construction: 2012, operating hours: 99,097 h, working height: 45 mm, power: 6.5 kW (8.84 HP), working length: 2,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum working length: 2,600 mm Maximum working height: 45 mm Gbsdpfez Ekhdox Aivsu MACHINE DETAILS Installed total power: 6.5 kW Operating hours (according to the meter): 99,097 h The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6063

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t Gbsdpfx Asy Nd Sieivsu dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: used, Year of construction: 1989, table length: 2,240 mm, table width: 1,400 mm, workpiece weight (max.): 5,000 kg, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time, no later than October 31, 2026! TECHNICAL DETAILS Longitudinal adjustment of the table (X-axis): 2,000 mm Transverse adjustment of the intermediate slide (Y-axis): 1,600 mm (1,500 mm) Vertical adjustment of the crossbeam (W-axis): 900 mm Adjustment of the drilling spindle (Z-axis): 400 mm Distance between the table clamping surface and the spindle head: min. 100 mm Distance between the table clamping surface and the spindle head: max. 1,400 mm Passage between the columns: 1,600 mm Workpiece weight max.: 5,000 kg Gbjdpfx Aez Hvyzjivsu Tool holder: SK 50 Table Width of the clamping surface: 1,400 mm Length of the clamping surface: 2,240 mm Clamping surface: 3.14 m² Number of T-slots: 9 T-slot width: 22 H7 mm Distance between T-slots: 160 mm Adjustment speeds Axis X: 0.1–4,000 mm/min Axis Y: 0.1–4,000 mm/min Axis Z: 0.1–4,000 mm/min Difference between adjacent feeds: 0.1 mm/min Rapid traverse speeds Axis X: 12,000 mm/min Axis Y: 12,000 mm/min Axis Z: 8,000 mm/min Axis ZW: 1,600 mm/min MACHINE DETAILS Control system: Siemens 840D Dimensions & Weight Space requirement (L × W × H): 7,000 × 6,500 × 5,300 mm Weight: 22,500 kg EQUIPMENT Comprehensive documentation All fluids will be drained before collection. Data backup has been saved to a USB drive. A 10-ton bridge crane is available on-site to assist with disassembly and loading. A forklift can be used if arranged in advance.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 10,649 h, functionality: fully functional, machine/vehicle number: 101161, travel distance X-axis: 1,020 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 920 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 14,000 rpm, A new spindle was installed one year ago! TECHNICAL DETAILS Travel in X-axis: 1,020 mm Travel in Y-axis: 620 mm Travel in Z-axis: 920 mm Swivel range of B-axis: +30° to -120° Spindle speed range: 1–14,000 rpm Tool holder: SK 40 Tool magazine capacity: 40 Clamping surface of rotary table: 1,200 × 610 mm Diameter of rotary table: 500 mm Gbjdpsz Hwutefx Aiveu MACHINE DETAILS CNC control: Heidenhain iTNC 530 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Power: 75 kVA Rated current: 100 A Main fuse: 120 A Machine weight: 8,740 kg Operating hours (according to counter) Spindle running time: 10,649 h Program running time: 11,159 h Machine operating hours: 24,317 h Control operating hours: 26,901 h EQUIPMENT Fixed rotary table NC rotary table WALTER B-axis swivel head with torque drive Vertical tool changer 3D measuring probe Heidenhain Electronic handwheel Fixed full protective enclosure with interior lighting Internal cooling system Coolant system Oil mist extraction Chip conveyor Operating manual

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: MITSUBISHI, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Y-axis: 250 mm Travel range, Z-axis: 250 mm Spindle speed range: 60–15,000 rpm Spindle speed control: stepless Tool changer: vertical Magazine capacity: 12 Tool interface: SK 30 Workpiece clamping area: 400 × 250 mm MACHINE DETAILS Control system: MITSUBISHI Jaw width: 100 mm EQUIPMENT Fixed angular table Gsdpfsz Hxb Uex Aivjbu Dual-pallet changer 4 × Allmatic vices Various tool holders SK 30 Electronic handwheel Full-protection enclosure with sliding doors and interior lighting Coolant system with paper band filter Coolant system Two-color signal light Chip conveyor 6 × Machine feet Operating manuals

Year of construction: 2024, condition: new, We are offering this new Machine Wala Enterprise MSA-2 double-die semi-automatic paper plate making machine, manufactured in 2024. Manufacturer: Machine Wala Enterprise Model: MSA-2 Year of Manufacture: 2024 Condition: New Category ID: 691 Gedsz E Damjpfx Aivobu Type: Double-die semi-automatic paper plate making machine If you have any questions or require further information, please send us a message or call us.

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. Gsdozlt Ayjpfx Aivjbu This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process.

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS Gjdpsy Du N Uefx Aivebu PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 480 h, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MFMC-6000W_ Pro-BKW1.0, laser hours: 480 h, laser power: 6,000 W, laser wavelength: 1,000 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,106 mm, table width: 1,582 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, workpiece weight (max.): 900 kg, input voltage: 400 V, input current: 33 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 11,800 kg, total length: 1,560 mm, total width: 5,900 mm, total height: 2,745 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, 2023 DNE LC3 3015 6kW Fibre Laser Cutting Machine - FAST SALE WANTED Used 2023 DNE LC3 3015 6kW CNC Fibre Laser Cutting Machine for Sale – 3000 x 1500mm – MAX Photonics 6000W Laser Source – Pallet Change Table Machine Manufacturer: DNE Model: LC 3 6000 Machine Type: Fiber Laser Cutting Machine Capacity: 3000 x 1500mm Year: 2023 Control: CNC Condition: Excellent Condition Price: Includes Decommissioning & Loading Built as part of the DNE/Bystronic fibre laser range, the LC3 combines high cutting speeds, straightforward operation and relatively low running costs compared with traditional CO2 laser cutting systems. Main Specifications Manufacturer: DNE Model: LC3 3015 Year: 2023 Machine Type: CNC Fibre Laser Cutting Machine Laser Power: 6kW / 6,000W Laser Source: MAX Photonics Fibre Laser Nominal Sheet Size: 3,000 x 1,500mm Approx. Cutting Area: 3,106 x 1,582mm Z-Axis Travel: Approx. 100mm Maximum Sheet Weight: Approx. 900kg Laser Source The machine is fitted with a: MAX Photonics 6kW / 6000W Fibre Laser Source MAX Photonics fibre laser technology is widely used in industrial sheet-metal cutting applications and offers efficient cutting with relatively low maintenance requirements. The 6kW power level provides a good balance between high-speed thin-sheet cutting and the ability to process heavier plate. Approximate Cutting Capacities Depending on material grade, assist gas, nozzle arrangement and cutting parameters, published capacities for the 6kW LC3 include approximately: Mild Steel: Up to 20mm Stainless Steel: Up to 20mm Aluminium: Up to 20mm Brass: Up to 10mm Copper: Up to 10mm Actual production cutting capacity, speed and edge quality will depend on the material specification and cutting parameters being used. Godpfxez D D N Ej Aivsbu Machine Performance Maximum X/Y Positioning Speed: Approx. 100m/min Maximum Simultaneous Positioning Speed: Approx. 140m/min Position Repeatability: Approx. 0.05mm Average Bilateral Position Deviation: Approx. 0.10mm Edge Detection Accuracy: Approx. ±0.5mm These characteristics make the LC3 suitable for both high-speed thin-sheet work and general production fabrication. Shuttle / Pallet Table System The DNE LC3 is designed with a sheet handling arrangement intended to minimise non-cutting time between jobs. Approximate Table Change Time: 24 seconds The rapid table exchange system allows the next sheet to be prepared while the machine is cutting, improving overall machine utilisation. Approximate Machine Dimensions Overall Length: Approx. 10,561mm Overall Width: Approx. 5,903mm Overall Height: Approx. 2,744mm Approximate Machine Weight: 11,800kg Transport dimensions and lifting requirements should be confirmed prior to collection. Please Note All specifications, cutting capacities, dimensions, weights and machine details quoted above are approximate and are provided for guidance only. Actual cutting performance will depend on material grade, assist gas, nozzle configuration, machine condition and cutting parameters. Prospective purchasers should verify all important specifications and operating requirements prior to purchase.

Condition: used, Year of construction: 2011, working width: 1,300 mm, workpiece height (max.): 50 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Maximum workpiece thickness: 50 mm Number of working areas: 2 Number of controlled axes: 3 Drilling units Number of drilling units: 4 Drilling unit 1: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Drilling unit 2: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Drilling unit 3: Bottom Horizontal drilling spindles in Y-direction: 42 Drilling unit 4: Bottom Horizontal drilling spindles in Y-direction: 42 Milling units Number of milling units: 2 Milling unit 1: Top Controlled axes: 3 Motor power: 6.6 kW Godpfjz Ekggox Aivebu Milling unit 2: Top Controlled axes: 3 Motor power: 6.6 kW Sawing units Number of sawing units: 2 Sawing unit 1: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm Sawing unit 2: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm EQUIPMENT Albatros machine programming software Collets for workpiece clamping The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5446

Condition: used, Year of construction: 2008, number of axes: 3, working width: 1,300 mm, working length: 3,200 mm, TECHNICAL DETAILS Working area, X-axis: 3,200 mm Working area, Y-axis: 1,300 mm Number of controlled axes: 3 Gbodpfx Asz Ekchjivju Total number of drilling spindles: 36 Tool change stations: 10 MACHINE DETAILS Power of main electric spindle: 11 kW EQUIPMENT Type of machining: Drilling and milling The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7468

Condition: used, New 2013 Gsdpoyhdi Refx Aivobu Table size 1474 x 356 mm X axis 1016 mm Y Axis 596 mm Z Axis 584 mm (Head Traverse) Spindle Speeds 40 – 5000 rpm & 40ISO 7.5 hp Spindle Drive. Max Table load 850 kg

Year of construction: 2019, condition: like new (used), ETIKETT LABELLING MACHINE FOR SELF-ADHELSIVE LABELS YOM 2019 NEW CONDITION WAS USED FOR STICKING LABELS WITH NECESSARY DESCRIPTION ON TETRA PAK PACKAGES STILL IN PRODUCTION TILL MAY 15TH Gedpfx Aisyynlzjvjbu

Condition: good (used), 1 x Provatec 745 Burger Forming Machine Serial number: 745.04.686 Gedpfx Aisz Hn Tasvsbu 3 Phase

Condition: excellent (used), Year of construction: 2004, Year 2004 With 8 station Fastem pallet loading system with tombs Tooling & manuals 12,000rpm Gbsdpfx Aiezxr Twovju 40 ATC DIN40 / Renishaw probing Pallet size 400mm x 400mm

Condition: reconditioned (used), Year of construction: 2004, machine/vehicle number: 63237, clamping force: 350 kN, total length: 2,759 mm, total width: 886 mm, total height: 1,900 mm, overall weight: 1,310 kg, warranty duration: 6 months, Awaiting refurbishment at our headquarters in Northamptonshire is this Boy 35M injection moulding machine. Gbodpfxoz Armfj Aivsu Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: used, Year of construction: 2002, Chiron FZ 15 W High Speed Twin Pallet Vertical Machining Centre. Serial No. 147-18 (2002) with Fanuc Series 18i-M Control, Dual Peiseler AWUP 160 NC Rotary Units, Air Bench Mist Filtration Unit, Swarf Conveyor. Country of Origin: Germany Gsdpfx Aisz Ar Ezovjbu Location: These lots are located in Sheffield, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2013, A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine is equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Specification Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Gbsdpfxozzwg Us Aivju Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain. With following options fitted : - Pneumatic tool change ISO 30 - Drilling unit with ER25 collet. - Extended Y axis stroke 400mm - Increased clamping capacity 200mm. Year - 2013 CE Compliant Serial Number - 22170