Used Continuous Shelf for sale (5,779)

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard Dkedpfeh R Taqjx Aqvon - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) Dksdomhhypepfx Aqvjn - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard Dkodpfx Aqsmhh Dheven - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: Dkodpfxomhh Dzj Aqvjn 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Djdpjfdkb Tjfx Aqvekn Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing Dksdsmhh Anspfx Aqvjn - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard Dksdpeguk A Hsfx Aqven - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Dsdpfoguk Dkex Aqvokn According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard Dedpfxomhhy Nj Aqvekn - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) Dkodpomhh Dtsfx Aqvjn - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm Dsdpfx Aoguk Dvjqvokn - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2020, condition: like new (used), functionality: fully functional, conveyor belt length: 95,000 mm, Tunnel Type Enamel Cooking Ovens are based on the principle of hanging the workpiece to be fired on the oven conveyor and firing at maximum 1200C. These types of furnaces are internally rotating furnaces, after the workpiece is hung on the conveyor (maximum gross output 1 000 kg/h), it is provided to be fired (firing zone 10meters) or dried while traveling at a certain speed according to the thickness and m2 area of the part. Tunnel Type Enamel Cooking and Drying Ovens are specially designed with our expert engineering staff. Our Tunnel Type Enamel Cooking and Drying Ovens are also manufactured as assembled. Thanks to this feature, it can be easily assembled and moved to other areas if desired. In the industry, it is preferred by high-capacity production enterprises. Dksdpfjvcdr Dsx Aqvon

Condition: good (used), Stacking boxes, plastic boxes, Euro stacking boxes, transport baskets, stacking baskets, Euro stacking containers, small load carriers, storage bins, shelf boxes, shelf boxes -Manufacturer: Schoeller, Arca Systems shelving units -Type: 9133 -Number: 1190 boxes available -Price: per piece, minimum order 5 pieces -Dimensions: 595/230/H100 mm Dodpfx Aouzn Dxsqvjkn -Weight: 0.7 kg/pc.

Condition: used, We are offering used pallet racking for sale here. TECHNICAL DATA Frames: 3,000 x 1,100 mm x 70 mm Finish: galvanized Beams: 2,700 mm Box section: 120 x 50 mm Bay load: 2,400 kg Colour: orange Manufacturer: Tegometall Condition: used Scope of delivery: 1 starter bay + 2 add-on bays consisting of: 2 starter bays + 8 extension bays 12 frames 40 beams 160 safety pins Yellow bumper guards (upright protection) can be purchased for €5.00 per piece net. PRICES Net price: €1,115.68 Gross price: €1,327.66 (incl. VAT) Available quantity: 350 m pallet racking Location: 14656 Brieselang – transport can be organized on request Djdpfx Asy Dgcmsqvjkn YOUR CONTACT PERSONS Tanja Henkelmann Rainer Nürenberg Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. Extra costs depend on the destination and shipment volume and can be quoted individually upon request. TERMS OF PAYMENT Terms of payment are to be agreed upon in the case of an order. The price stated is per item/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT. ABOUT US DLK in Nordhorn specializes in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer interesting used items from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, We offer used pallet racks for sale here. TECHNICAL DATA Frames: 3,000 x 1,100 mm x 70 mm Finish: galvanized Beams: 2,700 mm Box profile: 120 x 50 mm Bay load: 2,400 kg Color: orange Manufacturer: Tegometall Condition: used Scope of delivery: 1 starter bay + 2 add-on bays consisting of: - 4 frames - 12 beams - 2 locking pins The yellow collision protectors (upright protection) can be purchased for €5.00 each (net). PRICES Price: €360.00 net Price: €428.40 incl. VAT Available quantity: 350 m of pallet racking Location: 14656 Brieselang – Transport can be arranged upon request YOUR CONTACTS AT OUR COMPANY Tanja Henkelmann Rainer Nürenberg Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist with transport and assembly of the goods. This item is available for pickup. Delivery or shipping is possible for an additional charge. The extra costs depend on the delivery location and shipment size and can be requested individually from us. PAYMENT TERMS Payment terms are to be arranged in the event of an order. The price stated is per unit/net price or as specified in the item description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US Djdpfsy Dga Esx Aqvjkn The company DLK in Nordhorn deals in new and used products from the fields of intralogistics, conveyor technology, mezzanine floors, textile warehouses, as well as machines for commerce, industry, and trades. We continuously offer a range of attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The building blocks for success from DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, functionality: fully functional, Shelf trolley / Transport trolley / Order picking trolley / up to 7 levels / 3 mesh walls / 3 shelves Dksdpfx Aqjyw Nthovon

Condition: used, Year of construction: 2017, Old Lodige KM 1200 D continuous mixer with ploughshares (year 1977) transformed into a mixer-dryer (year 2017) by the previous user. Modification made : New enclosure / mixing chamber in stainless steel 316. Change of motor transmission: belt -> geared motor Main material: 316 stainless steel Year: 2017 Type of drying: hot air blowing Without electrical cabinet With piping 1 – Ploughshare mixer 1200 L Motor manufacturer: SEW Power : 18,5 KW Material: 316 stainless steel + 2 manual butterfly valves + 2 manual Orbinox knife gate valves Porthole interior view Safety box suppression (brand : Vigilex) No manufacturer’s plate 2 – Fan n°1 Manufacturer: Kiekens Model : 8 KTEN 355 Year: 2017 Volume: 1204 m3 / H Power : 15 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA 3 - Fan n°2 Manufacturer: Kiekens Model : 8 KTEN 280 Year: 2017 Volume: 1204 m3 / H Power : 4 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA Djdpfxjx R An Ej Aqvokn 4 – Heat exchanger Manufacturer : Bronswerk heat transfer B.V Year: 1996 Exchange surface: 67 m2 x 2 Max pressure : 20 bar Max. temperature: 215°C Fluid : water or steam Volume : 17 L x 2 Temperature sensor connection 5 – Dust collection cyclone Year: 2017 With DMN Westinghouse rotary valve (type : butterfly) On frame 6 – Platform with stairs and mixer support Manufacturer: IJSSEL technology

Condition: used, Manufacturer: Ernens Materials: Stainless steel. Dkedpfx Aqjx Rz Rlevjn Nature of the cleaning fluid: liquid / water – Capacity: example with sultanas 600 to 800 kg/h – Feeding belt: 350 cm x 1500 mm – 2 compartment bowl 600 x 900 x 600 mm including : 1 inclined screw for product recovery d.150 mm 1 screw + horizontal draining drum d.300 mm – Heating by external recycling of the fluid

Condition: used, Material: stainless steel Double screw: 2 nylon brushes in two sections: Ø 200 mm x 3000 mm Quick disassembly Mounted on a mobile frame: 4 wheels Power: 0,55 kw Speed controller : mechanical Support for feeders and dosing systems Dkedpsx Rz N Ijfx Aqvjn Overall dimensions 3800 x 550 x 1700

Year of construction: 2012, condition: excellent (used), Now available: Mueller Apparatebau 6612 cutting system with complete pile stacking line This machine is equipped wih following for processing continues feed, cutting and stacking Dedpfohx Rkcex Aqvekn - unwinder - Mueller apparatebau merger - Mueller apparatebau cutting system - Mueller apparatebau automatic collating table - Mueller apparatebau output belt Now available for a very good price!

Condition: used, Year of construction: 1998, functionality: fully functional, total length: 23,360 mm, total width: 9,543 mm, total height: 4,200 mm, number of shelf rows: 11, shelf length: 23,360 mm, load capacity per storage section: 200 kg, frame height: 2,200 mm, inner dimension length: 1,000 mm, inner dimension width: 1,000 mm, inner dimension height: 300 mm, overall weight: 12,000 kg, shelf height: 2,200 mm, construction width: 1,000 mm, machine base height: 2,200 mm, support length: 1,000 mm, Equipment: double-sided, SSI SCHÄFER SHELVING SYSTEM + MEZZANINE PLATFORM / PICKING WAREHOUSE / RACKING SYSTEM For sale is a complete multi-tiered shelving system with mezzanine platform manufactured by SSI Schäfer. Ideal for order picking, spare parts storage, dispatch warehousing, e-commerce, or industrial warehousing. The system is dismantled and immediately available. ----- MANUFACTURER SSI Schäfer MODEL R4000 Shelving System with Mezzanine Platform YEAR OF MANUFACTURE 1998 ----- TECHNICAL DATA Shelving System Dksdeytfnrepfx Aqvsn Approx. 817 storage levels on ground floor Max. shelf load: 200 kg per shelf Max. bay load: 2,500 kg Mezzanine Platform / Upper Floor Load capacity: 500 kg/m² Top of platform: approx. 2,200 mm ----- SCOPE OF DELIVERY Complete shelving system Mezzanine / steel platform Staircase Railings Shelves Frames Connecting elements ----- LOGISTICS Freight volume: approx. 2 trucks Collection: Viersen (North Rhine-Westphalia, Germany) ----- ASSEMBLY Assembly by trained fitters possible nationwide. Shipping and assembly costs on request. ----- PRICE €16,500 plus statutory VAT.

Condition: used, total length: 39,900 mm, total height: 3,000 mm, shelf height: 3,000 mm, support length: 2,700 mm, Included in this package: 15 uprights, each 3,000mm x 1,100mm (blue) 56 beams, each 2,700mm (yellow) 112 safety pins This results in a racking row with 14 bays, each with 2 levels plus floor pallet position = total of 126 pallet spaces (1,000kg per pallet) Approx. 800 uprights and 4,500 beams are available for this system. Please contact us for details. Manufacturer: Jungheinrich Type: MPB Condition: used, good condition Height: 3,000 mm Length: approx. 39.90 meters Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Compartment load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 126 Accessories such as: Floor fixings Connectors Load notices Impact protectors Guard rails Grating panels Rear mesh panels Support bars Safety barriers ...and much more. Simply ask us for your requirements! Dodpjyvr U Eefx Aqvskn "Benefit from over 20 years of industry experience – we provide expert and personal advice as your specialist dealer for new and used racking systems." Sales & Delivery Conditions (B2B) - Prices & Logistics: All prices are net ex location. Express delivery with our own fleet possible by arrangement. - Offer status: All offers are non-binding. Subject to prior sale. - Retention of title: Goods remain our unrestricted property until full payment is received (no processing or disposal before settlement). - Warranty: Exclusive sales to businesses (§14 German Civil Code). No liability for material defects with used and grade II goods. Manufacturer warranties apply to new goods.

Condition: used, Included in this package: 1 x upright 11,750 mm x 1,100 mm (galvanized) (The uprights can be cut to any height—just ask us) Available from Berlin or Neuwied For this system, 400 uprights and 2,800 beams are available. Please contact us for more information. Dkodpfxoyvr Swj Aqvsn Manufacturer: Meta Jungheinrich Type S Condition: used, good condition Height: 11,750 mm Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Bay load: 11,750 kg with a buckling length of 235 cm Accessories such as: - Floor fixings - Connectors - Load warning signs - Impact protection guards - Safety barriers - Wire mesh shelves - Back mesh panels - Depth bars - Boundary railings And much more... Just ask! "Benefit from over 20 years of industry experience – we offer you expert and personal advice as your specialist dealer for new and used racking systems." Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are net ex location. Express delivery using our own fleet possible by individual arrangement. - Offer status: All offers are subject to change without notice. Intermediate sale expressly reserved. - Retention of title: Goods remain our unrestricted property until full payment has been received (prohibition of disposal and processing). - Warranty: Exclusive sale to commercial customers (§ 14 German Civil Code). For used and surplus stock, liability for material defects is excluded. For new goods, manufacturer warranties apply.

Condition: used, Included in this package: 1 x pallet racking beam 1 x crossbeam, 2,700 mm (orange) 2 x locking pins Available from Berlin or Neuwied There are 400 frames and 3,000 beams available for this system. Feel free to contact us. Manufacturer: Meta Jungheinrich TYP S Condition: used, good condition, some with labels Beam length: 2,700 mm Bay load: 3,000 kg Accessories such as: - Floor fixings - Connectors - Load capacity warning notices Dkjdpfxeyvr Hnj Aqvsn - Impact guards - Guard rails - Wire mesh decks - Rear mesh panels - Depth support bars - Safety barriers and much more... Just ask us! "Benefit from over 20 years of industry experience – we provide you with expert and personal advice as your experienced specialist supplier for new and used racking systems." Sales & Delivery Conditions (B2B) - Prices & Logistics: All prices are net ex location. Express delivery via our own fleet available upon request. - Offer status: All offers are non-binding. Subject to prior sale. - Retention of title: Goods remain our sole property until full payment has been received (prohibition of disposal and processing). - Warranty: Sale exclusively to business customers (§ 14 German Civil Code). For used and second-choice goods, liability for material defects is excluded. For new goods, the respective manufacturer's warranties apply.

Condition: used, Included in this package: 50 uprights, each 11,750mm x 1,100mm (galvanized) (The uprights can be cut to any required height – simply inquire) 396 beams, each 2,700mm (orange) 792 safety pins Available ex Berlin or Neuwied This configuration results in a racking aisle with 49 bays, each with 4 levels plus storage on the floor, providing a total of 743 pallet spaces (900kg per pallet). Additional uprights and beams for this system are also available. Contact us for details. Manufacturer: Meta Jungheinrich Type S Condition: used, good condition, some with labels Height: 11,750 mm Length: approx. 137.30 running meters Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Maximum shelf load: 2,700 kg Maximum bay load: 11,750 kg Pallet spaces: 743 Accessories such as: - Floor anchors - Connectors - Load warning signs - Impact protectors - Guard rails - Grating Dodpfx Ajyvr Edeqvskn - Rear mesh panels - Depth bars - Partition railings and much more... Simply contact us for details! "Benefit from over 20 years' industry experience – we provide expert, personalized advice as your specialist dealer for new and used racking systems." Terms & Conditions of Sale and Delivery (B2B) - Prices & Logistics: All prices are net ex works. Express delivery via our own fleet available upon request. - Offer status: All offers are subject to change. Intermediate sale expressly reserved. - Retention of title: The goods remain our sole property until full payment has been received (prohibition of further disposition and processing). - Warranty: Sale is exclusively to commercial customers (§ 14 BGB). For used and IIa goods, liability for material defects is excluded. Manufacturer warranties apply to new goods.