Used Construction Sites for sale (22,623)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12389, Equipment: documentation/manual, We are offering this used FAT T1 regeneration system, manufactured in 2013. 1. Brief Description For sale is a thermal sand regeneration system from the German manufacturer FAT Förder- und Anlagentechnik GmbH. The system is currently in operation and is being sold solely due to a capacity expansion at the site. The sale is not due to any technical or economic deficiencies. The system has only been operated in a production hall and is in very good technical and visual condition. 2. Technical Data Manufacturer: FAT Förder- und Anlagentechnik GmbH Type: T1 Factory Number: 12389 Year of Manufacture: 2013 Fuel: Natural Gas Thermal Output: 350 kW Regeneration Temperature: approx. 850 °C Throughput: approx. 850 to 1,300 kg/h Sand System: PEP-SET / Cold Resin Systems Volatilization Loss: up to approx. 0.1% Installation: Production Hall Availability: Dismantling from mid-September 2026 3. Scope of Supply The scope of supply includes:  Frequency-controlled sand dosing via screw conveyor  Sieve  Magnetic Separator  Thermal Regeneration Furnace  Cooler Sand/Air Cooler (Recuperation) Air/Water Cooler Chilling Unit  Control Cabinet  PLC Control  Electrical Equipment Credpfszhvagjx Aa Hog  Pneumatic Components  Original FAT Documentation Not included in the scope of supply:  Dust extraction system, as it is connected to a central extraction system  Sand conveyor after the cooler The system is currently connected to the existing central dust extraction system of the plant. 4. Performance Features The system was designed for the regeneration of chemically bonded molding materials and achieves excellent regeneration results. Special Features:  Volatilization loss up to approx. 0.1%  High regenerant quality  Economical natural gas operation  Robust FAT construction  Proven industrial continuous operation  Complete technical documentation available 5. Documentation Scope The following documents are complete:  Operating Instructions  Maintenance Instructions  Circuit Diagrams  Pneumatic Diagrams  Installation Plans  Layout Drawings  Water Installation Plans  FAT Construction Drawings  Technical Documentation (2 folders) + Switchgear Planning The completeness of the documentation has been verified. 6. System Condition The system is in continuous production operation until dismantling. Advantages for the buyer:  Functional demonstration possible during operation  Inspection possible by appointment  Documented system condition  Weather-protected hall installation  Weather-independent dismantling and loading 7. Dismantling and Availability Dismantling is expected to be possible from mid-September 2026. The system is located inside a production hall and is very easily accessible for dismantling and loading operations. 8. Reason for Sale The system is being sold solely due to a capacity expansion at the production site. The existing system meets all technical requirements and is in functional condition. 9. Inspection Inspections and functional demonstrations are possible by prior appointment. Qualified interested parties will be provided with further technical documents, drawings and photo documentation upon request. If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 43,686 h, total height: 2,300 mm, overall weight: 7,000 kg, table width: 500 mm, table length: 870 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D Powerline, working width: 500 mm, cutting length (max.): 870 mm, laser power: 100 W, number of axes: 3, This 3-axis DMG Sauer Lasertec80 FineCutting was manufactured in 2006. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 700 mm. The machine is equipped with a Siemens SINUMERIK 840D Powerline control and a high-precision cross table with linear drives. If you are looking to get high-quality laser fine cutting capabilities, consider the DMG Sauer Lasertec80 FineCutting machine we have for sale. Contact us for further details. Technical Data • Machine Type: Laser Fine Cutting, Laser Drilling and Laser Welding Machine • Control: Siemens SINUMERIK 840D Powerline • Table Type: Cross Table with Linear Drives • Maximum Sheet Size: 870 × 500 mm • Vertical Axis with Linear Guideways and Ball Screw Drive • Machine Base: Mineral Cast Construction • Laser Type: Lasag KLS246 Nd:YAG Laser • Average Laser Power: 100 W • Focal Length: 70 mm • Machine Dimensions (L × W × H): 6,000 × 5,000 × 2,300 mm • Machine Length: 6,000 mm (including aggregates, operation and maintenance space) • Machine Width: 5,000 mm (including aggregates, operation and maintenance space) • Operating Hours: 43,686 h • Laser Unit Condition: C Module Defect Crjdpszl T R Dofx Aa Hog Additional Equipment • Precitec Processing Head • Automatic Height Control • Keller Dust Extraction System • Automatic Filter Cleaning System • KKT Kraus Water-Air Cooling Unit • Programmable Process Gas Pressure • Completely Overhauled Laser Cavity • New Pulse Lamp • Precitec Laser Head Mounting Tools Machine Benefits • Suitable for Laser Fine Cutting, Laser Drilling and Laser Welding • High-Precision Cross Table with Linear Drives • Automatic Height Control for Precise Processing • Comprehensive Maintenance Logbook Available • All Repairs and Component Replacements Documented • Inspection on Site Possible • Repair of the Laser Unit PossibleRepair will only be carried out if requested. Please note that the selling price may vary accordingly.

Condition: used, mileage: 120,398 km, power: 382 kW (519.37 HP), first registration: 03/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2026, color: green, gearing type: automatic, total length: 7,900 mm, total width: 2,550 mm, total height: 3,145 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Packages and optional equipment * Safety package – Lights and Visibility * Safety package * Driver comfort package * Construction site package * Trailer package ----Cab and comfort * Cab NN: narrow, medium length, normal height * Comfort seats: driver's seat with air suspension, seat heating, armrests, lumbar support * Climatronic air conditioning * Auxiliary water heater 4 kW * Multifunction steering wheel * Professional instrument cluster 12.3 inches * Central locking with remote control * Cool box, storage compartments, cup holders, entry lighting ----Infotainment and connectivity * MAN Media System Professional Navigation 12.3 inches * MAN Sound System Advanced * Smartphone integration, online traffic information * Option for integrating MAN apps * 2 cameras (one linked to reverse gear) * Digital tachograph with remote communication * Digital axle load display for air-suspended axles and trailers * Engine start/stop system * Tipper indicator ----Lights & Visibility * LED headlights, LED daytime running lights, LED fog lights, LED cornering lights * High beam assistant * Automatic headlight activation * 2 rotating beacon lights (LED) on the cab roof Codozk Tyiepfx Aa Herg * 2 work lights on the cab roof * Exterior mirrors, electrically adjustable and heated * Curb mirror on the right side, electrically adjustable and heated * Sun visor * Construction site grille in front of headlights ----Drive and chassis * Engine: MAN D2676 LFAX, 382 kW (520 hp), 2,650 Nm, Euro 6e * Transmission: MAN TipMatic 12.26 DD * Various driving programs (Performance, Efficiency, Offroad, Manoeuvre) * Suspension: leaf/air suspension (BL) on front and rear axles * Front axle 8,500 kg, rear axle 13,000 kg, trailing axle 9,000 kg (liftable, steerable) * Disc brakes on all axles ----Assistance and safety * Electronic Braking System (EBS), ABS * Full brake assist * MAN EasyStart hill start assist * Electronic Stability Program (ESP) * Anti-slip control (ASR) * Emergency Brake Assist (EBA) * Lane Departure Warning (LDW) ----Body and attachments * MEILLER RS.21.60 roll-off tipper * MEILLER underrun protection USR-RK-03 * FMS interface * Storage box * Trailer coupling RINGFEDER type RF40/G150A??? ----* Tire dimension front axle: 385/55R22.5 * Tire dimension rear axle: 315/70R22.5 * Fuel tank: 380 liters * AdBlue tank: 85 liters * Technically permissible gross weight: 27,500 kg * Unladen weight: 10,785 kg * Technically permissible gross train weight: up to 53,000 kg * Permissible trailer load: 28,375 kg * Overall length: 7,900 mm * Wheelbase: 3,900 mm * Next inspection due: 10/2026 ----Vehicle number: 12273----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: * Trade-in of your old vehicle * TÜV/SP inspection * Complete export handling * Arranging financing * Applying for export license plates * Vehicle delivery * Vehicle registration * Recovery and vehicle transport ----YOUR VTS TEAM

Condition: used, Year of construction: 2008, power: 5.8 kW (7.89 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, total height: 1,400 mm, total length: 2,700 mm, total width: 1,000 mm, overall weight: 550 kg, Equipment: CE marking, No. 04542 Edge banding machine HEBROCK Top 2000 Used, year of construction 2008 Max. edge thickness 3 mm Max. workpiece height 50 mm Feed speed approx. 10 m/min Glue pot heating time approx. 5 min Total connected load 5.8 kW Codpfxozrpnls Aa Hjrg Glue application unit with quick-heating glue pot for hot-melt adhesive granules End trimming unit for flush cutting of protruding edge material Combination trimming unit with two motors, 0.37 kW each Four-flute indexable insert cutters for flush, bevel and radius trimming Electronic glue temperature control with digital display Workpiece support with rollers Mobile machine base Transport dimensions approx. 2700 x 1000 x 1400 mm LWH Weight approx. 550 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 4,500 mm, clear span: 3,600 mm, clearance between the columns: 3,600 mm, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Csdpozrr Nfofx Aa Herg Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 35 l, color: red, empty load weight: 1,520 kg, maximum load weight: 1,000 kg, lifting height: 2,370 mm, tire size: 26x12.00-12, number of seats: 1, emission class: euro5, shovel volume: 0.3 m³, Year of construction: 2026, Equipment: 3rd hydraulic function, 4th hydraulic function, additional headlights, all wheel drive, cruise control, differential lock, gripper hydraulics, hydraulics, onboard computer, standard shovel, The HZM 807 Profi is your compact, articulated-steering yard loader for agriculture, gardening, landscaping, and municipal operations. Equipped with the proven Perkins 403J-11 diesel engine (25 hp / 18.4 kW), the hydrostatic PWG drive system, and an inside turning radius of just 1,358 mm, it maneuvers precisely and powerfully even in the tightest spaces. As standard, the machine features a 0.3 m³ standard bucket with a Euro attachment. The hydraulic quick-change system enables tool-free changing of all yard loader attachments with Euro attachments from the driver's seat in under 60 seconds. The 3rd and 4th hydraulic circuits with continuous pressure function and pressure-free return enable continuous operation of hydraulically powered attachments without any loss of performance. The auto-drive control allows you to adjust the driving speed independently of the engine speed, the manual throttle lever maintains the speed at a constant, optimal working level, and the electrically controlled reversing switch on the joystick enables comfortable changes in direction without having to move your hand. With a lifting height of 2,370 mm (bottom edge of the bucket) and an overall width of just 1,140 mm, the HZM 807 Profi is ideal for loading and transport tasks in narrow barns and confined construction sites. The ergonomically adjustable driver's seat and the tilt-adjustable steering wheel ensure fatigue-free working. The complete LED lighting system with work lights, headlights, and a rotating beacon guarantees good visibility at night and indoors. A rain protection roof is installed as standard; a closed cab is available at an additional cost (€1,490). The machine is CE-certified according to the EU Machinery Directive 2006/42/EC and complies with the EN 474 standard. The scope of delivery includes the COC document for road approval, with a maximum speed of 12 km/h. A driver's license of class L is sufficient for operation on public roads; no driver's license is required on private property. 2 years manufacturer's warranty included. Technical data: Codpfx Aszp H Rlsa Herg Feature Value Engine Perkins 403J-11, Diesel, water-cooled Engine power 18.4 kW / 25 hp Max. torque 66.9 Nm Drive type Hydrostatic with 2 travel motors (1 gear) Maximum speed 12 km/h Fuel tank 35 l Hydraulic tank 35 l Max. hydraulic oil pressure 180 bar Max. hydraulic oil flow 38 l/min Operating weight 1,520 kg Tipping load (machine level) 1,000 kg Standard bucket 0.3 m³ Lifting height 2,370 mm Turning radius inside/outside 1,358 mm / 2,542 mm Wheelbase 1,339 mm Overall length/width/height 3,398 mm / 1,140 mm / 2,370 mm Highlights: Rain protection roof; ergonomically adjustable seat; adjustable steering wheel; LED work/headlights, rotating beacon; professional joystick with hydraulic pilot control; manual throttle lever; auto-drive control; PWG drive system; Euro quick-change system with pressure relief; flat-seal oil couplings; 3rd/4th hydraulic circuit; floating position; oil cooler; brake inch pedal. Scope of delivery: HZM 807 Profi incl. Euro attachment & 0.3 m³ standard bucket, German operating manual, COC documentation, 2 years mobile warranty with free workshop choice, invoice with VAT stated. Options: Closed cab (+€1,490); individual configuration on request. Financing/leasing: Possible on request, also for individual entrepreneurs and agricultural businesses.

Condition: used, Year of construction: 2017, operating hours: 11,087 h, Equipment: ABS, Hitachi ZW220-6 Wheel Loader | Volvo Bucket | Quick Coupler | Central Lubrication System Serial Number: 0000278 VEHICLE FRAME / EQUIPMENT * Articulated wheel loader * Central lubrication system * Work lights * Rotating beacon ATTACHMENTS * Volvo bucket, model B2014 * Hydraulic quick coupler * Joystick control * Automatic bucket and lifting functions TIRES * Tires: 23.5 R25 ENGINE / TRANSMISSION * Cummins QSB6.7, 6-cylinder diesel engine * 149 kW (203 hp) * 6,690 cm³ displacement * Emission standard: EU Stage IV * Automatic transmission * Direction change switch on the joystick CABIN / EQUIPMENT * Air conditioning * Radio * Ergonomic joystick control * Digital information display WEIGHTS * Permissible total weight: 18,600 kg * Permissible front axle load: 8,800 kg * Permissible rear axle load: 10,200 kg OTHER * Year of manufacture: 2017 * Operating hours: 11,087.5 h * Wheelbase: 3,300 mm ----We don't leave you alone, even after the purchase: We will support you in organizing the transport and loading. Just contact us - we will be happy to help! We speak German, English and Russian. All information is without guarantee. Subject to changes, errors, printing and typographical errors as well as prior sale.----About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. For many years, we have stood for experience, reliability and competence in the field of refurbishment and distribution of commercial vehicles and construction machinery. Our strength lies in the purchase and sale of new and used commercial vehicles, construction machinery and special vehicles. On our approximately 11,000 m² site, you will find a wide selection for a variety of applications. We will support you personally and reliably - from the first contact to the handover.----Our service for you: Vehicle and machine loading We will help you with the loading of your purchased machine. Special transport We will support you in organizing a suitable special transport. Customs formalities Codpfx Aszp Sx Isa Horg We will also support you in customs matters. Transfer and transport If desired, we will support you in organizing the transport.

Condition: used, mileage: 202,401 km, power: 320 kW (435.08 HP), axle configuration: 6x4, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, total length: 104,600 mm, total width: 25,500 mm, total height: 38,500 mm, loading space length: 62,900 mm, loading space width: 24,900 mm, loading space height: 3,900 mm, Year of construction: 2009, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. [phone number]). Mercedes-Benz Actros 2644 L 6x4 platform truck with rear crane Crsdpfeztlrijx Aa Heg Crane: MKG HLK 541 HP, 307 operating hours, 5 hydraulic extensions, 2 manual extensions, radio remote control, 4-point support, crane tip, load chart: see photos, twist locks, outriggers, A00 front axle air-suspended, A57 front axle with camber, AL4 front axle 8.0 t, AM4 rear axle H7 13.0 t, bevel gear 233, AP3 axle ratio i = 3.714 (HL7), B43 trailer brake 2-line, B65 AIR DRYER HEATED, BB5 disc brake on front and rear axle, BB8 Telligent braking system with ABS and ASR, C71 rear underrun protection (EC), C73 front underrun protection (EC), CB9 splash guard (EC), front, CE6 DUST PROTECTION FOR AIR SPRING, CL9 steering LS 6/LS 8, DS3 pop-up roof, electric, E39 FUSE AUTOMATA, E52 CB mobile radio system, E86 battery sensor, EB3 batteries, 2 x 12V/220 Ah, maintenance-free, EC6 trailer socket, 15-pin, EC8 adapter, 15-pin to 2x7-pin socket, EM8 PSM, cab and trailer CAN, ISO 11992, ES5 auxiliary socket 12 V/15 A, cab bulwark, ET2 voltage converter 24 V/12 V, 15 A, EU2 CD radio Bluetooth, without mobile phone charging interface, EV2 CB radio pre-wiring, EV5 telephone, fax pre-wiring, EX8 toll collection pre-wiring, material Toll Collect, F04 L cab, F52 external sun visor, transparent, FA5 curtain, transverse in front of bed/sleeping berth(s), FA6 Mercedes star, illuminated, FC0 rain sensor and automatic headlights, FC7 tinted windows, without band filter, FE5 electric windows, driver and passenger door, FG1 digital clock with alarm function, FG6 drawer above engine tunnel, pull-out, FH9 root wood trim, cab, FK0 storage compartments above, with hinged lid, FL4 comfort cab suspension, steel-sprung, FN2 comfort cockpit, FQ2 cool box, 25 l, in pull-out drawer, FS2 wide-angle mirror, on driver's side, heated, FS4 sun blind, side window driver's door, FT2 exterior mirror, housing chrome, FX7 front mirror aerodynamic, front, FZ7 immobilizer, with transponder, G86 twin-plate clutch, GE7 Mercedes PowerShift 2, GH8 Mercedes PowerShift G 330-12/11.63-0.77, H03 air conditioning, H04 additional thermal insulation, H61 auxiliary hot air heater, Webasto Air Top 2000, HF1 construction site filter, I69 tires tubeless, 315/70 R 22.5 rear axle, IA5 wheel arrangement 6x4, ID2 air suspension rear axle, IE8 tires 385/55 R 22.5 front axle/front lifting axle/rear lifting axle, IF2 MPII series, IL1 domestic (Germany), IL6 color tone control, metallic, IL8 left-hand drive version, IR8 wheelbase 4800 mm, IV5 26.0-tonne truck, J76 air horns, cab roof, JD3 tachograph, dig. EC, speed limiter + additional recorder, ADR, JK2 combination instrument, graphic display, JZ2 tachograph manufacturer Stoneridge TVI, K40 fuel tank lock, KD6 exhaust gas monitoring for nitrogen oxide (NOx), KE9 on-board diagnostics 2, with NOx control, KG2 muffler, SCR catalytic converter medium, stainless steel, KH8 exhaust pipe, tailpipe downwards, KP4 AdBlue tank, 95 l, KP9 AdBlue container, plastic, KU4 main tank 400 l, aluminum, L16 fog lights, halogen, L54 rotating beacon yellow, left+right front, L72 electrical system, for external body, M62 air intake rear top, air filter under cab, MD4 speed limiter 90 km/h, EC, MD9 cruise control, MO1 viscous coupling electromagnetic, for fan, Behr, MS5 BlueTec 5 (Euro V), MV4 engine, V6, diesel, 320 kW (435 hp), 1800/min, MZ8 air compressor, 2-cylinder, regulated, N55 transmission oil cooler, ND3 auxiliary dri

Condition: used, mileage: 412,602 km, power: 331 kW (450.03 HP), first registration: 12/2020, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2028, color: yellow, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, all wheel drive, Internal Vehicle No.: G400186 Available immediately at our yard in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova German Scania 450 XT 4x4 Tractor Unit | Tipping Hydraulics | Euro 6d | 16 Units Available For sale are 16 used Scania 450 XT 4x4 tractor units from the model years 2020 and 2021. The mileage ranges between approximately 302,000 and 408,000 km. Credpfezqic Hjx Aa Hsg The vehicles are equipped with 450 hp diesel engines, Scania Opticruise automatic transmissions, all-wheel drive, tipping hydraulics, auxiliary drive, and leaf/air suspension. Thanks to the robust XT design, they are particularly suitable for use on construction sites and as dump trucks. Technical data: * Manufacturer/Model: Scania 450 XT * Vehicle type: Standard tractor unit * Model years: 2020 and 2021 * Power: 331 kW (450 hp) * Engine displacement: 12,742 cm³ * Fuel: Diesel * Transmission: Automatic/Scania Opticruise * Transmission: GRS0905 * Scania Ecocruise * Transmission oil cooler * Emission standard: Euro 6d * Environmental badge: 4 (Green) * Axles: 2 * Wheel arrangement: 4x4 * Wheelbase: 3,600 mm * Drive: All-wheel drive * Hydraulic system: Tipping hydraulics * Auxiliary drive: EG652P * Suspension: Leaf/Air * Saddle height: approx. 1,350 mm * Permissible total weight: 20,500 kg * Tare weight: 8,850 kg * Payload: 11,650 kg * Fuel tank capacity: 400 liters * Aluminum fuel tank * Color: Yellow * MOT: New * Vehicle number: G400185 * Condition: Used Equipment: * Scania XT version * Opticruise automatic transmission * Engine brake, 2-stage * ABS * ASR * Differential lock * Tipping hydraulics * Auxiliary drive * Drum brakes on front and rear axles * Heavy-duty stabilizer bar at the front * Air conditioning * Auxiliary heater, 2 kW * Heated comfort driver's seat * 1 sleeper bed * Cruise control * Electrically adjustable and heated exterior mirrors * Electric windows, left and right * LED daytime running lights * Fog lights * Roof beacon * Air horn * Sun visor * Sunroof * CG cab Tires: * Front axle: 385/65 R22.5 * Rear axle: 315/80 R22.5 Available vehicles: * 03.12.2020 - YS2G4X40005606169 - 4x4 - 377,585 km * 07.12.2020 - YS2G4X40005606365 - 4x4 - 348,389 km * 07.12.2020 - YS2G4X40005606348 - 4x4 - 302,800 km * 07.12.2020 - YS2G4X40005606584 - 4x4 - 343,862 km * 03.12.2020 - YS2G4X40005606255 - 4x4 - 408,008 km * 07.12.2020 - YS2G4X40005606440 - 4x4 - 378,609 km * 07.12.2020 - YS2G4X40005606413 - 4x4 - 354,302 km * 07.12.2020 - YS2G4X40005606452 - 4x4 - 387,469 km * 07.12.2020 - YS2G4X40005606408 - 4x4 - 340,793 km * 03.12.2020 - YS2G4X40005606276 - 4x4 - 319,700 km * 03.05.2021 - YS2G4X40005624233 - 4x4 - 351,327 km * 03.05.2021 - YS2G4X40005624498 - 4x4 - 314,612 km * 03.05.2021 - YS2G4X40005624047 - 4x4 - approx. 350,000 km * 03.05.2021 - YS2G4X40005624143 - 4x4 - 345,983 km * 03.05.2021 - YS2G4X40005624599 - 4x4 - 344,498 km * 03.05.2021 - YS2G4X40005624462 - 4x4 - 326,043 km The technical data, mileage, and equipment features may vary slightly depending on the vehicle. Inspection is possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale are subject to change.

Condition: used, mileage: 128,707 km, power: 310 kW (421.48 HP), first registration: 10/2019, fuel type: diesel, overall weight: 22,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2028, color: orange, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), Internal vehicle number: G400234 Available immediately at our yard in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Mercedes-Benz Arocs 2042 4x4 MEILLER Tipper | Winter Service | Euro 6d For sale: a used Mercedes-Benz Arocs 2042 4x4 with a MEILLER tipper body, manufactured in 2019. The vehicle features a 421 hp diesel engine, automatic transmission, permanent all-wheel drive, and tipping hydraulics. Thanks to its robust 4x4 configuration and winter service equipment, this vehicle is ideal for municipal operations, construction site use, and winter road maintenance. Technical specifications: * Manufacturer/Model: Mercedes-Benz Arocs 2042 * Vehicle Type: Tipper/Winter Service Vehicle * Body: MEILLER Tipper Body * First Registration: 10/2019 * Year of Manufacture: 2019 * Mileage: 128,707 km * Power: 310 kW (421 hp) * Engine Displacement: 12,809 cm³ * Cylinders: 6 * Fuel: Diesel * Transmission: Automatic * Emission Standard: Euro 6d * Environmental Badge: 4 (Green) * Axles: 2 Crsdjzr Ayzspfx Aa Hsg * Wheel Arrangement: 4x4 * Drive: All-Wheel Drive * Hydraulic System: Tipping Hydraulics * Permissible Gross Weight: 22,000 kg * Unladen Weight: 10,775 kg * Payload: 11,225 kg * Automatic Climate Control * ABS * ESP * Fixed Trailer Coupling * Color: Orange * TÜV (Technical Inspection): New * Vehicle Number: G400234 * Condition: Used * German Vehicle Inspection is possible by prior appointment. Further information, photos, and videos are available upon request. Errors, changes, and prior sale are subject to change. Financing example: * Internal Number: G400234 * Purchase Price: €95,900.00 * Down Payment: 10% * Term: 60 months * Monthly Rate: €1,490.02 * Residual Value: €16,380.00 If you are interested in this offer or would like to customize it to your needs, please contact Mr. Enchev. We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing is available directly with us.

Condition: used, mileage: 3,243 km, power: 397 kW (539.77 HP), first registration: 12/2025, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 12/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Digital tachograph R4.1. The ESE 6 RD 8000 is the ideal vehicle for demanding civil engineering and waste disposal work. The combination of high suction power and compact dimensions makes this model a versatile all-rounder for use on construction sites. Features include: entry lighting for driver and passenger, sun visor, driver's air-suspended seat, cooler box, all-round lights on the cab, LED daytime running lights, air horns on the cab, reversing camera, LED work lights, trailer hitch with ball head, articulated hose carrier with swivel joint with swivel motor, swivel range 180°, additional swivel joint as a 3rd link, hydraulic swivel drive, MAN sound system, RIO box, MAN radio with 12.3" screen, navigation with SD card, lane guard system, reversing camera, ESE 32/8DV2-K (ESE 6RD 8000) PTO OMSI, high-performance double fan Qmax 42000 m³/h Pmax 40000 Pa, 8 m³ tipping container, one-sided discharge, tipping height approx. 2000mm, high-pressure water system 200 bar 21l/min, RSP exhaust silencer, emergency stop button, RM Vario suction nozzle, 2x PU suction hose extension each 2 meters, fan and superstructure, rotating module on the suction nozzle, gas detection system, grounding system. Crjdpfxjzc A Ars Aa Heg

Condition: used, mileage: 202,092 km, power: 290 kW (394.29 HP), first registration: 11/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2027, color: orange, emission class: euro6, total length: 7,700 mm, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, air conditioning, soot filter, MB 2640 Multilift Roll-off Truck 6x4 Suspension: Leaf-air Wheelbase: 3.60 m Payload: 14,565 kg HIAB Hooklift Type: XR21S46 - W - IT2B- Year: 2016 4.80 m to the center of the rollers Special Equipment: Front axle load 8.0 t, Audio system: CD radio (Bluetooth), Step with handrail on the roof, Exhaust to the lower right, Brake connection standard and DuoMatic, Air horn, Suspension: Front springs 8.0 t, 3 leaves, Transmission: 12-speed - Type: G 230-12, Rear lights, construction site version, Info display 10.4 cm with additional display, Interior filter for construction vehicles, Fuel tank: 290 L steel, left, Air intake from the front, Parameterizable special module, Rotating beacon left/right, Reversing warning audible (warning signal outside), Rear cross member reinforced, Protective plate under main tank, Seats in the cab: Driver's seat, sprung comfort seat, Sun visor outside, Sunshade for side window, driver's door, Additional stabilizer, Rear axle / trailing axle, Storage flap outside left, 24V socket in the passenger footwell, additional, Stone chip protection grille Additional Equipment: Emission standard EURO 6, Axle configuration: 6x4, Trailer brake 2-line, Trailer socket 24V / 15-pole, Arocs, Exterior mirrors electrically adjustable and heated, Battery 170 Ah, Differential lock rear axle, Compressed air connection in the cab, Compressed air tank steel, Cab: Width 2.30 m, Cab: Cab entry movable, Cab: Tilting device hydraulic, Cab: M ClassicSpace, Cab: steel sprung, standard, Cab floor with engine tunnel 170 mm, Crjdpfxezf Sg De Aa Hjg Suspension: Leaf / air, Window lifters electric, Windshield tinted, Generator 100 A, Urea tank (AdBlue): 60 L, Lift roof manual (steel), Rear axle bevel gear 233, Interior filter: Pollen filter, Steering power pump unregulated, Air compressor 2-cylinder, Air dryer heated, Engine 10.7 L - 290 kW R6 Diesel (OM 470), Engine brake, Engine compartment encapsulation, Auxiliary drive MB 131-2c, Frame lowering without air spring residual pressure control, Ramp mirrors, Waste heat recovery, Rear window, Disc brakes with full protection, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Passenger multi-adjustable seat, Stabilizer front axle, Socket cab 24V, Tachograph / EG control device, Rear underrun protection fixed, Front axle straight, Water pump regulated, Permissible total weight 26.0 t, Oil cooler transmission We will also be happy to support you in the area of financing/leasing with our partners. All information without guarantee. Subject to change and prior sale.

Condition: good (used), Year of construction: 2019, Kaeser M250 construction site compressor Cjdpfxszb Nf De Aa Hjrg 25 m3/min 10 bar Integrated dryer Battery disconnect switch Diesel engine: Mercedes-Benz Operating hours: 2,205

Condition: good (used), mileage: 473,158 km, power: 368 kW (500.34 HP), first registration: 06/2019, fuel type: diesel, axle configuration: 10x4, wheelbase: 7,490 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 10,090 mm, total width: 2,550 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, power assisted steering, power mirror, - Brake booster - Differential lock - High beam headlights - Windshield - Low noise - Speed limiter - Air conditioning - Air horn - Rotating beacon - Rear view camera - Sun visor - Tool box - Power take-off (PTO) Technical Information Number of cylinders: 6 Engine displacement: 12,882 cc Axle Configuration Maximum front axle load: 10,000 kg Rear axle 1: Max. axle load: 10,000 kg Rear axle 2: Max. axle load: 9,500 kg Rear axle 3: Max. axle load: 9,500 kg Rear axle 4: Lift axle; Max. axle load: 10,000 kg; Steerable Weights Unladen weight: 19,025 kg Payload: 29,975 kg GVW: 49,000 kg Functional Body manufacturer: PIET RUIZEVELD REAR DUMP BODY WITH FLAPS Dumper: Rear Condition Technical condition: good Optical condition: good Identification License plate: 20-BNK-9 IVECO TRAKKER 500 E6 10x4 DUMP TRUCK Geurts Trucks B.V. presents this exceptionally well-maintained and excellently serviced IVECO Trakker 500 Euro 6 10x4 rear dump truck. This vehicle was specifically developed for professional use in earthmoving, road and civil engineering, quarry operations, mining, and for the transport of heavy bulk goods. The Trakker is powered by a powerful IVECO Cursor 13 six-cylinder turbo diesel engine with 500 hp (368 kW) in combination with a fully automatic transmission, which combines maximum driving comfort with optimal power transmission. The robust 10x4 configuration ensures maximum traction and reliability – even under the most difficult operating conditions. General data * Manufacturer: IVECO * Model: Trakker 500 E6 * Axle configuration: 10x4 * First registration: 07.06.2019 * Emission class: Euro 6 Csdpfjzxglzsx Aa Herg * Mileage: 473,158 km * Engine power: 500 hp (368 kW) * Engine: IVECO Cursor 13, 6-cylinder turbo diesel * Transmission: Fully automatic * Cab: Day cab * Color: Original factory paint Chassis and drive The extremely stable chassis was designed for the highest loads in daily use on construction sites. Equipment: * 10x4 axle configuration * Air-suspended rear axles * Differential locks * High off-road capability * High payload * Robust frame construction * Optimal weight distribution * Excellent driving characteristics on the road and on construction sites Cab The comfortable day cab offers the driver an ergonomic and safe workplace. Equipment: * Pressurized system for dust-free cabin air * Air conditioning * Fully automatic transmission * Comfort driver's seat * Adjustable steering wheel * Electric windows * Electrically adjustable and heated exterior mirrors * On-board computer * Multifunction instruments * Central locking * Numerous storage compartments * Excellent all-round visibility Dump body The vehicle is equipped with a high-quality Piet Ruizeveld rear dump body, which was specifically developed for daily heavy-duty operation. Technical data: * Body manufacturer: Piet Ruizeveld * Type: Rear dump body * Body made of high-wear-resistant Hardox steel * Loading volume: approx. 26 m³ * Aluminum cover flaps * ...

Condition: used, axle configuration: 2 axles, first registration: 03/2025, next inspection (TÜV): 03/2027, loading space length: 3,320 mm, loading space width: 2,350 mm, loading space height: 600 mm, total width: 2,420 mm, total height: 410 mm, Year of construction: 2025, Vetter TRG 8120 / TRA 8120 Cable Drum Variable Trailer, 1 owner, low usage, not used on construction sites, as new condition. TRA 8120 tandem trailer for the Subduct Drum Frame TRG 8120: - Height-adjustable overrun drawbar with DIN towing eye and jockey wheel, including interchangeable ball hitch coupling. - 2 rear telescopic crank supports. - Floor made of phenolic resin-coated plywood with mounting points for securing the frame. - Ramp slot for inserting aluminum ramps. - No drop sides, no aluminum ramps included. - Trailer TÜV-certified. Cjdpozxix Rjfx Aa Hjrg - Vehicle ID No.: WHC2PHTXXRN623360 Payload: 1200 kg Unladen weight (approx.): 800 kg Gross weight: 2000 kg Drawbar load: 100 kg Platform internal width: 2350 mm Trailer overall width: 2420 mm Platform internal length: 3320 mm Maximum trailer overall length: 5550 mm Loading height: 600 mm Coupling height: 410 mm Tyres: 4x 195/55 Additional equipment: aluminum side panels, 300 mm high, including APR Board hinges, for trailer TRA 8120. Optional extras: Aluminum ramps 2500x600x55 mm, APR Ramp. Surcharge for 2 aluminum ramps, each 2500x300x55 mm, coarse, for trailer TRA 8120. - Permissible load per ramp pair: axle spacing 2.0 m = 1400 kg; axle spacing 1.5 m = 1400 kg; axle spacing 1.0 m = 1220 kg; single axle = 900 kg Net purchase price: €696.00 + 19% VAT TRG 8120, drum transport and 1 pay-off frame for up to 8 subduct drums on trailer TRA 8120 or on truck beds. The frame can also be placed on the ground at the worksite and the drums unwound. Drums from various manufacturers can be accommodated: - Up to 8 drums, diameter 1200 mm - Max. drum width: 440 mm - Max. payload: 2000 kg The frame is equipped with: - 2 lightweight aluminum drum axles - 6 spacers - 4 clamping collars for 2 shafts - 1 rear portal for deflection piping Advantages of the frame: - Usable on a range of vehicles - Can be placed directly on the ground - Fully disassemblable, bolted construction - Completely hot-dip galvanized and robust Technical data: Length: 2770 mm, Width: 2330 mm, Internal width: 2160 mm, Height: 770 mm, Weight approx. 277 kg Former net new price: €16,892 + 19% VAT Despite the utmost care, errors in this advertisement cannot be excluded. Errors and prior sale reserved!

Year of construction: 2011, condition: used, This is an 115-liter electric braising pan, MAGNUM 3/1 GN, from the premium manufacturer MKN, type Optima 850. The braising pan is a multi-functional device for poaching, boiling, simmering, stewing, and frying. It is emptied via a safety drain valve on the front. The device has been inspected in our in-house workshop and is fully functional. The braising pan has been completely refurbished and is in excellent condition. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1300 x 850 x 850 mm Inner pot W x D x H: 700 x 540 x 250 mm Power connection: V: 400 / kW: 19.2 Serial number: 11203758 Type: 2022705 Year of construction: 2011 Nominal capacity: 115 liters Condition: Used, inspected and fully functional Further information: Multi-functional cooking appliance for poaching, boiling, simmering, stewing and frying Braising pot made entirely of highly corrosion-resistant chrome-nickel steel Frying surface made of special sandwich material (MKN PowerBlock), smooth-ground Heated by SUPRA contact heating elements for optimal heat distribution and short heating times Braising pot with raised edge, tightly welded High thermal capacity ensures uniform heat transfer and minimal temperature fluctuations when the plate is loaded with cold food Standard with electronic "Eco Control" Standard with double-walled hinged lid and mixing tap Codpszu Rpcefx Aa Herg Emptying via safety drain valve to the front Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday - Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, mileage: 114,000 km, power: 350 kW (475.87 HP), first registration: 10/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Mercedes Benz Arocs 2648 /6x4/ TRUCK CRANE/MOUNTING CRANE/ROOFER CRANE!! GERMAN VEHICLE, all inspections performed at Mercedes Benz, original paint CRANE MKG/HMK 401 HPA 4 L/ wire rope winch, remote control 26 m fully hydraulic - 900 KG, plus 2 x mechanical up to 31 m - 400 KG. Axle load front axle 9.0 t, trailer brake 2-line, audio-navigation system Bluetooth comfort, exhaust downwards to the right, battery 220 Ah, air horn, electrical pre-wiring in the cab 24V / 100 A, suspension: rear leaf springs 2x13.0 t, suspension: front leaf springs 9.0 t, 4 leaves, parking brake additionally on front axle, luggage compartment on the upper part of the rear wall, transmission 12-speed - type: G 330-12, transmission lock for auxiliary drive, rear lights construction site version, info display 12.7 cm with video function, fuel tank: 390 L steel, left, air intake on the side of the cab, engine brake reinforced, auxiliary drive MB 124-10c, configurable special module, spare wheel, pipe breakage protection brake system, reversing warning acoustic (warning signal outside), rear cross member reinforced, drawer under dashboard, seats in the cab: armrest passenger seat, seats in the cab: driver's seat comfort suspension seat, sun visor outside, sun protection roller side windows, driver and passenger door, voltage converter 24V / 12V 10 A, steel rims 11.75x22.5 (on front axle), steel rims 9.00x22.5, socket 12V additionally, socket 24V in the passenger footwell additionally, stone guard grille, carpet on the engine tunnel, door extension for the cab, preparation for CB radio, preparation for reversing camera, front axle straight, ground clearance increased, additional thermal insulation, auxiliary heater (water), two-disc clutch Cedpfx Aezu Du Soa Hsrg Emission standard EURO 6, axle configuration: 6x4, trailer socket 24V / 15-pole, Arocs, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air connection in the cab, compressed air tank steel, cab: width 2.30 m, cab: cab entry movable, cab: tilting device hydraulic, cab: L StreamSpace, cab variant: StreamSpace, cab: steel-sprung, comfort, storage compartment outside left, storage compartment outside right, lifting roof electric, windshield tinted with band filter, preparation comfort bunk above, wide, curtain sleeping cabin, seats in the cab: driver's seat backrest foldable, suspension: leaf spring / leaf spring, power windows, vehicle without rear window, generator 100 A, urea tank (AdBlue): 60 L, rear axle bevel gear 233, interior filter: pollen filter, body/superstructure: chassis, comfort bunk below, comfort locking system, steering pump unregulated, air compressor 2-cylinder, air dryer heated, engine 12.8 L - 350 kW R6 Diesel (OM 471), engine compartment encapsulation, ramp mirror, waste heat recovery, disc brakes with partial protection, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger multi-function seat, stabilizer rear axle, stabilizer front axle, socket cab 24V, tachograph / EG control device, underrun protection rear fixed, preparation toll collection, water pump regulated, permissible total weight 26.0 t, oil cooler transmission.

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 10,000 l, total length: 3,350 mm, total width: 2,600 mm, total height: 3,000 mm, overall weight: 569 kg, Double-walled 10,000-liter diesel tank: 230 Volt (TT10000P) The TT10000P is a robust 10,000-liter double-walled diesel storage tank equipped with a fully functional 230-volt filling system. With a flow rate of 72 liters per minute, a 6-meter filling hose, and an automatic filling nozzle, this tank is the ideal choice for companies with high fuel consumption, such as large agricultural contractors, transport companies, construction companies, and industrial sites where reliable and safe diesel storage on a maximum scale is required. Safety & Construction The double-walled plastic construction offers maximum protection during diesel storage and is equipped with an integrated leak detection system that immediately signals any leakage between the walls. Thanks to the overfill protection, unwanted overflow is prevented. The lockable pump housing protects the system against unauthorized use and weather conditions. Operation & Regulations For easy management of fuel consumption, the tank is equipped as standard with a digital liter counter with daily and total display. The tank complies with BAL regulations, making it suitable for stationary storage in accordance with applicable environmental and safety requirements. Key benefits Double-walled construction with leak detection for maximum safety Complies with BAL regulations for stationary diesel storage 230 Volt filling pump with 72 ltr/min, 6 m hose, and automatic filling nozzle Digital liter counter with daily and total display Cedpszwv I Nsfx Aa Hjrg Lockable pump head

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 4033, overall weight: 800 kg, type of input current: AC, input voltage: 220 V, total width: 1,000 mm, total length: 10,000 mm, total height: 1,200 mm, Pitney Bowes Vantage Sorting System designed for high-volume mail processing, document handling and sorting operations. The system is engineered to scan, image and sort large volumes of mail using automated OCR, configurable sorting bins and piece-level tracking. This is a comprehensive industrial sorting system comprising eight sorting sections, multiple sorting bins, operator control panels and monitoring equipment. Information displayed on-site indicates a processing capacity of approximately 45,000 mail pieces per hour and approximately 30 million pieces annually. Depending on the configuration, the available specifications indicate maximum processing speeds of up to 46,300 No. 10 envelopes per hour or up to 50,000 postcards per hour. Manufacturer: Pitney Bowes / BlueCrest Model: STV1 Year: 2012 Product line: Vantage Sorting System Equipment type: Automated letter and mail sorting system Construction: Metal structure Crodpszxbgasfx Aa Hjg New one around 1,5 m. Euros Requests for proposals.

Condition: like new (used), mileage: 10,854 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 3,682 mm, overall weight: 3,500 kg, empty load weight: 2,669 kg, maximum load weight: 831 kg, operation weight: 2,669 kg, first registration: 10/2020, next inspection (TÜV): 09/2028, loading space length: 3,733 mm, loading space width: 1,780 mm, loading space height: 1,800 mm, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 8.1 l/100km, fuel consumption (combined): 8.6 l/100km, CO₂ emissions: 224 g/km, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2020, total length: 6,290 mm, total width: 2,070 mm, total height: 2,580 mm, fuel: diesel, machine/vehicle number: Master L3 4 x 4, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, all wheel drive, all-season tires, car registration, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, immobilizer system, onboard computer, parking heater, power assisted steering, power mirror, sliding door, soot filter, start-stop system, traction control, trailer coupling, truck registration, Master van with original 10,000 km, in top condition No rental company – no delivery service – no construction site use All-wheel drive, switchable Gearbox reduction, switchable Euro 6 emission standard – green particulate filter badge Engine: 2.3 dCI – 96 kW / 131 hp Wheelbase L3: 4332 mm AD BLUE technology ECO function for fuel-efficient driving Air conditioning Auxiliary heater with timer Cruise control Rearview camera ABS – Anti-lock braking system ESP – Electronic stability program Csdpfx Aajzxc U Ee Herg ASR – Anti-slip control Brake assist Hill start assist 3 x seats in fabric – passenger double seat with folding table Driver's seat height-adjustable with armrest + lumbar support Airbag for driver + passenger Central locking with remote control Electric windows Electrically adjustable and heated exterior mirrors Side marker lights Steering column, height-adjustable On-board computer Outside temperature display Gear shift indicator Radio with USB / MP3 / AUX Bluetooth hands-free system LED daytime running lights Heat-insulating glazing Storage compartment above the windshield Storage gallery dashboard Power steering 6-speed manual transmission Rear step bumper Cargo area partition with window LED cargo area lighting Roof-height cargo area lining Wooden cargo floor with lashing eyes for securing cargo Vehicle overall length: 6290 mm Vehicle height: 2580 mm Cargo area dimensions: 3733 mm long, 1780 mm wide, 1800 mm high Permissible total weight: 3500 kg Payload: 831 kg Trailer coupling can be retrofitted for up to 3500 kg towing capacity Vehicle has very good all-season tires, approx. 90% tread Complete service history, maintenance recently carried out MOT + emissions test new Very clean German vehicle in like-new condition from first owner Truck net price: €29,900 Typographical errors, errors and prior sale excepted We also offer affordable financing options and warranties up to 24 months, even for commercial users. Commercial vehicles at nutzfahrzeuge-heppenheim.de email: info-at-nutzfahrzeuge-heppenheim.de

Condition: ready for operation (used), This used Jungheinrich Esmena pallet racking system is a compact, high-performance heavy-duty racking solution for industrial storage requirements. The modular high-bay racking is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for the storage of Euro pallets and heavy loading units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 3,080 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam colour: yellow painted - Uprights: approx. 400 x 105 cm, pre-assembled - Upright colour: blue painted - Levels: Floor + 2 - Pallet spaces: 99 including floor positions - Version: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 12 x Uprights (approx. 400 x 105 cm), pre-assembled - 44 x Beams (approx. 270 cm) - 88 x Safety pins Crjdpfx Ajzxpmnea Hsg Price: €2,200 net €2,618 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner carriers – freight costs depending on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding quote – tailored to your specific requirements. Whether new construction, conversion, or expansion – we provide expert advice for your racking configuration. SHOWROOM: Feel free to visit us in our showroom! On site, you can get an in-depth look at our pallet racking, shelving systems, and other storage solutions. Many systems are assembled and ready for demonstration. Our specialist advisors are available to answer your questions and provide individual consultation – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 8:00 am to 4:00 pm. Alternatively, send us a message with your name and number, and we will get in touch with you as soon as possible.

Condition: ready for operation (used), This used Jungheinrich Esmena pallet racking system is a compact, high-performance heavy-duty racking solution for industrial storage requirements. The modular high-bay racking is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for the storage of Euro pallets and heavy loading units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 3,080 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam colour: yellow painted - Uprights: approx. 400 x 105 cm, pre-assembled - Upright colour: blue painted - Levels: Floor + 2 - Pallet spaces: 99 including floor positions - Version: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 12 x Uprights (approx. 400 x 105 cm), pre-assembled - 44 x Beams (approx. 270 cm) - 88 x Safety pins Price: Codszxppcopfx Aa Herg €2,200 net €2,618 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner carriers – freight costs depending on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding quote – tailored to your specific requirements. Whether new construction, conversion, or expansion – we provide expert advice for your racking configuration. SHOWROOM: Feel free to visit us in our showroom! On site, you can get an in-depth look at our pallet racking, shelving systems, and other storage solutions. Many systems are assembled and ready for demonstration. Our specialist advisors are available to answer your questions and provide individual consultation – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 8:00 am to 4:00 pm. Alternatively, send us a message with your name and number, and we will get in touch with you as soon as possible.

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a compact, high-performance heavy-duty racking system for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a load capacity of 2,000 kg per shelf and a bay load of 6,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 37.00 m - Shelf load capacity: 2,000 kg per shelf - Bay load capacity: 6,000 kg - Beams: approx. 360 × 12 × 5 cm Credpfxezxppve Aa Hjg - Beam color: yellow painted - Uprights: approx. 520 × 110 cm, pre-assembled - Upright color: blue painted - Levels: ground + 3 beam levels - Pallet spaces: 160 including ground spaces - Version: Used Jungheinrich MPB SCOPE OF DELIVERY: - 11 × Uprights, approx. 520 × 110 cm, pre-assembled - 60 × Beams, approx. 360 × 12 × 5 cm - 120 × Safety pins PRICE: €3,750.00 net €4,462.50 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams is optional - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your individual requirements. Whether it's a new construction, renovation, or expansion – we will provide you with competent advice on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, storage racking systems, and other solutions on site. Many systems are set up and can be experienced directly. Our specialist consultants are available to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND WHAT YOU'RE LOOKING FOR YET? Visit our website. Here you will find a quick overview of many other offers and models. ARE YOU INTERESTED OR DO YOU HAVE ANY QUESTIONS? Simply contact us by message or phone. You will find our telephone number on our company page. ☎️ You can reach us by telephone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 15 h, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required - E-starter: Convenient push-button starting - Robust cutting system: Hardened steel blades for long service life - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Cedpfozilarox Aa Hsrg Max. branch thickness: 200 mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Upon request, we offer technical service and repairs in our own workshop or directly at your site. Financing Leasing or installment payment available—please contact us for details.

Condition: used, No. 3280 Complete painting line / water-wash spray booths Used, system still completely assembled, from a furniture manufacturing company Large complete painting line, consisting of various water-wash spray booths, spraying equipment, extensive roller conveyor system as well as fresh air and exhaust air ducting Several water-wash spray booths / spray walls Spray booths partly designed as 3-sided booths Turntable available Various spraying units / pumps available Extensive roller conveyors for workpiece transport Fresh air supply / air technology available Exhaust air ducts / extraction system available Lighting above the spray booths available Dimensions of the spray booths approx. 3000 x 2000 mm / 2000 x 2000 mm / 2500 x 2000 mm Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Codpfszhblnex Aa Herg Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location