Used Construction Elevator for sale (19,748)

Condition: used, Serial number: D0500xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22060 Description:It has not been in operation for five years, so the condition is unknown.The grapple was working the last time it was in use.Ready for delivery. Own weight: 11 Model: Sorteringsklype Ihsdpfjx Ip Uaex Ag Uet

Condition: new, functionality: fully functional, machine/vehicle number: 12623007, empty load weight: 730 kg, maximum load weight: 1,270 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,280 mm, loading space width: 1,670 mm, loading space height: 2,300 mm, suspension: other, Year of construction: 2026, Loading dimensions approx. 1670 mm x 3280 mm x 2300 mm External dimensions approx. 2130 mm x 4475 mm x 2705 mm Permissible total weight: 2000 kg Payload: approx. 1270 kg (payload may vary depending on additional equipment) Manufacturer: Cheval Liberté Special features - Aluminium horse trailer GOLD Origins (2 horses) - Polyester roof and front section (aerodynamic) - Rear ramp in aluminium / pivoting and swivelling with rubber mat - Lockable tack room - Roll-up tarpaulin (air and light permeable) - Shock absorbers installed incl. 100 km/h approval - Lockable side door (large version) - Interior lighting with switch - Vehicle documents included Further equipment - Aluminium floor with 8 mm rubber mat (bonded and sealed) - Sliding windows left and right (tinted) - Partition bars front and rear (split / adjustable) - Centre partition (removable) - Emergency release - Kick protection and side padding Chassis - Knott | Rubber suspension axle | V-drawbar | Automatic heavy-duty jockey wheel | Reverse drive automatic Electrics - 12 Volt | 13-pin plug | Rear fog lamp If you wish to purchase this trailer or have further questions about trailers, please use our internal horse trailer reference "No. 12613027". Iodpfx Aei R Hvteg Uoht

Condition: new, functionality: fully functional, Year of construction: 2026, Technical data Drive type: Gasoline Output power: 3.7 kW Max. Cutting depth: 125 mm Max. Cutting disk diameter: 350 mm Motor Output power: 3.7 kW Max. recommended speed: 9300 rpm Speed at max. power: 9000 rpm Cylinder: 1 Isdpfx Ajtt Ad Tsg Uoht Number of strokes: 2-stroke engine Exhaust emissions (CO2 EU V): 711 g/kWh Drive type: Petrol Cutting equipment Max. Cutting depth: 125 mm Max. Cutting wheel diameter: 350 mm Mounting diameter: 25.4/20 mm Max. Cutting wheel thickness: 5 mm Max. speed: 90 m/s Coolant: Wet

Condition: good (used), The scope of delivery includes: 01x wooden beam, used Wood type: spruce / fir Cross-section: approx. 200 x 100mm Total length: approx. 2,800 mm Weight | piece: approx. 25.67 kg The price stated corresponds to the pick-up price for a wooden beam in the specified dimensions. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: Iedpfx Aovu Rq Dog Ujht This article is only available for pick-up. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 900 W, with electronic defrosting, for continuous operation. Very quiet operation. Dehumidification capacity max. 50 l/24 h, air volume max. 265 m3/h. Electronic control unit with illuminated large control panel and memory function. Electronic hygrostat. Air filter. Internal 7.7 l condensate container. In sturdy plastic housing with castors. In cardboard box. Iedpfx Agotty Raj Uoht Dehumidification capacity: ≤ 50 l/24 h Air volume: ≤ 265 m³/h

Condition: used, color: other, For further information, you can reach us on weekdays from 8:30 am to 5:00 pm and on Saturdays from 10:00 am to 3:00 pm at the following phone number . You can also email us at: See you soon! Ihsdpfxsx Nw Rxj Ag Uet

Condition: used, Please contact ATS Norway for more information Ihedpfxsxx H Nys Ag Uet Please provide reference number upon request: 21840 Description: Price is per unit.Owner states that one is a 2019 model and the other is a 2017 model.Ready for delivery.

Year of construction: 2011, condition: excellent (used), This is a complete plant for house construction. Prices are listed with each item. Consisting of the following individual elements (see attached document as well): Photos will follow, they are already included in the attached document. Table 1 (Positioning and clamping of the frame structure) €34,500 - Elevating longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Table 2 (Applying the first sheathing and fastening) €25,300 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 3 (Applying the second sheathing, fastening and turning the element onto the next table) €35,650 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping Iodpfxeu D Amgs Ag Ueht - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Electrical installation and insulation) €34,500 - Cross conveyor with rollers and sheathing - Table traverse drive - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Applying the first sheathing and fastening the second side) €32,775 - Longitudinal conveyor with 3 hinge conveyors - Cross conveyor with rollers - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 6 (Applying the second sheathing and fastening) €28,750 - Longitudinal conveyor with 3 hinge conveyors - Pneumatic cross clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal conveyor with 3 hinge conveyors - Hydraulic tilting unit - Table traverse mechanism - Upper guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 €13,800 (Applying the first layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 €13,800 (Applying the second layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 €13,800 (Applying the first layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 €13,800 (Applying the second layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Wall storage 1: 12 m long x 24 tracks €11,500 Wall storage 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 1 cross beam 2 t Abus €20,125 1 cross beam 2 t

Condition: good (used), Year of construction: 1998, Versatile frame dowel and slot boring machine with angle adjustment Especially designed for staircase construction, window manufacturing and universal applications thanks to pneumatic height adjustment. Angled doweling and baluster drilling are easily achieved via the rotatable drilling unit. Motor with pole switching, two speeds Motor power 1.0 / 1.5 kW, 1,400 and 2,800 rpm Motor started via convenient handle switch With Röhm two-jaw chuck 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit can be rotated 65 degrees left and right Pneumatic height adjustment for processing, doweling possible on two levels without repositioning. Desired drilling heights for each drilling level can be set via digital counter; switching between levels is pneumatic and operated from the front. Cross adjustment 340 mm, stepless or in 12 mm increments, with indexing bar Pneumatic clamping possible at any position, operated from the front Maximum height adjustment approx. 100 mm above table level Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps 1 clamp column can be moved to the front 2 swiveling workpiece supports Extraction funnel Central stop + 1 side stop Fixed mitre stop Length stop as round bar Assortment of drill bits Operating manual CE marking Machine has been partially repainted due to presence of paint splashes. Ihjdpfoxmatnsx Ag Ujt Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See "More offers from this seller."

Condition: good (used), Window rubber, cutting machine, seal cutter Ihjdpfob A Ncgox Ag Uet -Hitches: 2 -Dimensions: 2500/600/H1000 mm -Weight: 15 kg

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 1200 W, with automatic hot gas defrosting system, for continuous operation. Very quiet operation. Dehumidification capacity max. 80 l/24 h, air volume max. 850 m3/h. Electronic control unit with illuminated 3"" display and memory function. Electronic hygrostat, operating hours counter, power consumption counter. Air filter. In a sturdy sheet steel housing on a mobile tubular steel frame with large wheels. In cardboard box. Condensate container not included (see accessories below!) Dehumidification capacity: ≤ 80l/24h Air volume: ≤ 850 m³/h Super offer: When you buy a REMS Secco 80 set, you will receive 1 REMS Detect W humidity measuring device free of charge. You save an additional 233.55 euros. Ihedpeuy Thmsfx Ag Ujt The offer is valid until 31.12.2024

Condition: excellent (used), Year of construction: 2019, For sale: 2 Kardex Megamat RS 350 vertical carousels in excellent condition. These machines have been meticulously maintained with annual servicing and have only been operated in a clean, light-duty environment. The package comprises 2 units from 2017, available in two height versions: 6,585 mm and 7,110 mm. Each vertical carousel is equipped with either 21 or 23 carriers, resulting in between 42 and 49 shelves per unit. A detailed overview of each shelf configuration is available on request. All carousels are fitted with the optional "Matrix Strip" LED guidance system at the access opening. This system laterally indicates the picking location and displays product information; however, full functionality requires ERP or WMS integration. Please note: the boxes shown in the photos are not included in the offer. Technical data: Manufacturer: Kardex Remstar Model: MEG RS 350.1.3050.6.533.21 / MEG RS 350.1.3050.6.533.23 Year of manufacture: 2 units from 2017 Height (carousel/carrier): 6,585 mm & 7,110 mm, with approx. 470 mm free storage height Width (carousel/carrier): 3,675 mm / 3,050 mm Ihedpfjvgdkbox Ag Uet Depth (carousel/carrier): 1,671 mm / 628 mm Number of carriers/shelves: 21 or 23 carriers, 42–49 shelves Max. load per tray: 228–350 kg, depending on shelf configuration Supply voltage: 3/N/PE 400V For further information or inquiries, please do not hesitate to contact us.

Year of construction: 1988, condition: used, Serial number: 7.5745.3xxxx Please contact ATS Norway for more information Ihsdsx Azk Hspfx Ag Uot Please provide reference number upon request: 21961 Specifications: - 1988 model - Hours: 2550 - Electric - Charger - Hydraulic sideshift - Lifting capacity: 900 kg - Ready for delivery   Own weight: Model: 1988 Jungheinrich EFG D1.0 El Truck m/ Lade

Year of construction: 2000, operating hours: 1 h, condition: used, Transmission: Automatic Power: 1 kW (1 HP) Empty weight: 645 kg Ihedpfx Asx R Uamog Ujt Please contact Emal Jaweed for more information

Condition: new, REMS Orkan 1360 electric construction fan for commercial use. For ventilation of rooms, intermediate spaces, shafts, cavities and for ventilation and wind cooling of machines, marquees, event halls. To support the exchange of air in damp, musty cellars, to support the drying of e.g. concrete, masonry, plaster, screed and for filling e.g. inflatables, hot air balloons. Capacitor motor 230V, 50Hz, 145W, for continuous operation. Very quiet operation. Air volume 1360m³/h. In sturdy plastic housing. In cardboard box. Ihedpeuyg Utjfx Ag Uet Air volume: 1360 m³/h Power: 145 W

Year of construction: 2021, condition: used, Serial number: M12xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21878 Ihedpfx Agoxy Etme Ujt Specifications: - 2021 model - Weight: 700 kg - For excavators from 12-19 tons - Ready for delivery

Year of construction: 2000, operating hours: 1 h, condition: used, Transmission: Automatic Power: 1 kW (1 HP) Empty weight: 1 kg Please contact Emal Jaweed for more information Iodpfsx R T Snox Ag Uoht

Condition: new, REMS Orkan 2050. electric construction fan for commercial use. For ventilation of rooms, intermediate spaces, shafts, cavities and for ventilation and wind cooling of machines, marquees, event halls. To support air exchange in damp, musty cellars. Especially for accelerating the drying of e.g. concrete, masonry, plaster, screed. Condenser motor 230V, 50Hz, 145W, for continuous operation. Very quiet operation. Air volume 1740/2050m³/h. In sturdy plastic housing. In cardboard box. Air volume: 2050 m³/g Ihodetty Nnopfx Ag Ust Motor: 230 V, 50 Hz, 145 W

Condition: used, Please contact ATS Norway for more information Ijdpfex Ty Rijx Ag Ueht Please provide reference number upon request: 22136 Description: Plumett tensioner for sale on behalf of a customer.According to the owner, the machine is in working condition.Ready for delivery.

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21889 Ihsdjxy Evnepfx Ag Ust Description:A list with dimensions and quantities is included.The total amount is 1,540 m² of formwork.It is possible to purchase a smaller volume if desired.Can be delivered on short notice.

Year of construction: 2020, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20526 Specifications: Model: AD500 Year of Manufacture: 2020 Voltage: 400V Maximum Working Pressure: 14 bar Weight: 165 kg Condition: In good working order Isdpfx Asxu A Dfsg Ueht Delivery Status: Ready for delivery Description:Pneumatech AD500 refrigerated air dryer, manufactured in 2020. The unit is in good working condition. Ready for immediate delivery and use. Total Weight: 165

Year of construction: 1994, operating hours: 34,200 h, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20522 Specifications: Year of production: 1994 Hours : Approximately 34,200 Voltage: 400V Condition: Works as it should Delivery status: Ready for delivery Description: Ihsdpfxoxu A Ecs Ag Uot The compressor was produced in 1994 and has run approximately 34,200 hours . It works as it should and is ready for immediate delivery. Hours: 34200

Year of construction: 2016, operating hours: 68,000 h, condition: used, Serial number: CAI72xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20523 Specifications: Ihjdpfx Agoxu A Eij Ujt Model year: 2016 Hours: Approx . 68,000 Voltage: 400V Maximum pressure: 8.25 bar Weight: 360 kg Condition: Ready for delivery Description: The compressor is from 2016 and has run for approximately 68,000 hours . Ready for immediate delivery. Hours: 68000 Total Weight: 360

Year of construction: 2008, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20893 Specifications: Ihjdpjwwqduefx Ag Ust Year: 2008 Bucket volume: approx. 1,600 liters Bucket width: approx. 200 cm S70 quick coupler (top and bottom) Previously mounted on CAT 325DL (2008 model) 4 hydraulic hoses (approx. 240 cm) Extra outlet Control system: Engcon No. 9 Description:Engcon EC30 tiltrotator and SMP grading bucket sold as a set.Both feature S70 couplers and were previously fitted to a CAT 325DL.According to the owner, both units are in decent working condition.Available for prompt delivery. Own weight: 1000 Model: Engcon EC30 Rotortilt & SMP Pusseskuffe – S70 feste

Year of construction: 2022, operating hours: 72 h, condition: used, Serial number: AMOxxxx Please contact ATS Norway for more information Please provide reference number upon request: 21151 Specifications: Ijdsw R Nnqspfx Ag Ueht 2022 model Hours: 72 Weight: 2,950 kg Stage 5 engine Remote control Good tires Ready for delivery Hours: 72 Own weight: 2950 Model: F10 Strekkemaskin. Som Ny.