Used Compactor Plate for sale (12,848)

Condition: used, Year of construction: 2004, Manufacturer: Gerteis Model: GMP-Polygran Macro Pactor 250/100/3 Year: 2004 Type: roller compactor, granulation unit for the pharmaceutical industry. Feeding screw: 0.1–180 rpm Compaction screw: 1–460 rpm Compaction zone with pressure rollers: 1–30 rpm Granulation zone with star rotor and screen: 0–180 rpm Force: 1 – 20 KN/cm Gap width: 1.0 – 6.0 mm Pressure roller speed: 1 – 30 rpm Roller diameter: 250 mm Cjdpfx Acsx R Ar Rs Terg Roller width: 100 mm Capacity: 60 – 400 Kg/H (normal value: 200 Kg/h) Equipment dismantled and stored. Full electrical and technical file + program backup available. Electrical, control, and safety cabinets are not available. These items can be quoted separately.

Condition: good (used), Offer 80216 Cedpfx Aezrvmnjc Tsrg Technical data: - Various pass-through openings, round and square - Length approx. 450 mm - Width approx. 450 mm - Plate thickness approx. 120 mm - Table height with base frame 720 mm - Space requirement: W 500 x D 500 x H 720 mm - Weight approx. 120 kg

Condition: good (used), machine/vehicle number: 26041, Offer 26041 Technical data (approx.): - Plate length approx.: 3000 mm - Plate width approx.: 2500 mm - Plate height without base frame approx.: 180 mm Cedpjyvrx Rofx Ac Terg - Plate height with base frame approx.: 810 mm - Top plate thickness approx.: 115 mm - 11 T-slots in the table surface, length: 1500 mm - T-slot pitch in the table surface: 250 mm each - T-slot width approx.: 40 / 22 mm - T-slot depth approx.: 16 / 24 mm - Required space: L 3500 x W 2500 x H 1100 mm - Weight approx.: 4500 kg

Condition: good (used), Year of construction: 1982, Cutting length 4.300 mm Cedpfx Ajygm Tiec Torg Cutting height 1.800 mm machine weight ab. ca. 600 kg kg

Condition: used, Sheet metal trolley, welded steel construction Second-hand Single-sided loading platform made of plywood Codpozk Nr Iofx Ac Tsrg 5° tilt Side rail height: 915 mm Trolley powder-coated in RAL 5010 gentian blue Permanent or surface-protected impact- and scratch-resistant Tyres made of thermoplastic rubber on plastic rims with precision deep-groove ball bearings, grey, non-marking Thread and foot protection 2 swivel castors with wheel locks and 2 fixed castors 1500 x 370 Wheel diameter (mm) 200 x 40 Load capacity (kg) 500 Weight (kg) 47.5 Dimensions (WxDxH, mm) 1500 x 680 x 1200 Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Specifications and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 hollow roof-tooth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Dimension readout for: – horizontal cuts: via scale and strip-cutting stop - vertical cuts: via scale from 0–1,300 mm Extraction connection: 100 mm 5 material support rollers, per metre of cutting length 1 feed roller and 1 discharge roller Pneumatic workpiece clamping device between the support rollers 1 centre support element, per metre of cutting length Torsion-free, free-standing machine frame pneumatically retractable slatted frame Round bar guide, vertical and horizontal Finely adjustable folding stop Fine adjustment for horizontal saw cuts via handwheel Strip-cutting stop Credpfszk Nwqox Ac Teg Manual programming rail with 5 groove blocks Pneumatic lowering of the saw unit Pneumatic saw head locking mechanism Control panel on the saw unit: start button, stop button Control panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swivelling saw head Location: Flörsheim Availability: at short notice

Condition: good (used), Code: 0462 Brand: SERRMAC Model: V 22 - CE Standard Pillar drill with swivel table for machine shops, workshops, carpentry shops, and other applications - CE Standard Technical data: Sturdy construction Drilling capacity in steel diameter 22 mm Spindle taper cm2 Spindle stroke 90 mm Column diameter 98 mm Distance from column to spindle center 201 mm Table 350 x 250 mm Spindle speed 255/380/420/560/630/660/950/990/1090/2380/2590/3850 rpm Motor power 0,55 Kw Cjdpfszp Exzex Ac Torg Overall dimensions mm 400 x 750 x 1700 h Weight kg 170

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate, -T-slot plate: clamping plate on a solid base frame with inlet/outlet device -Clamping plate: Ø 600 mm -Groove width: 20 mm Cjdpfx Aeh It Tyjc Terg -Accessories: incl. 4 holders -Total dimensions: Ø 685 x 825 mm -Weight: 200 kg

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate, -T-slot plate: clamping plate with solid base frame -Length: 1350 mm -Width: 1150 mm -Plate thickness: 100 mm -Plate: with support ribs -Groove width: 26 mm Cedjhuf Iajpfx Ac Tjrg -Groove spacing: 110 mm -Dimensions total: 1350/1150/H825 mm -Total weight: 1000 kg

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with support ribs -Length: 1000 mm -Width: 1000 mm -Sheet thickness: 30 mm -Dimensions: 1000/1000/H260 mm Credpfxjiz Drxs Ac Tog -Weight: 402 kg

Year of construction: 2000, condition: excellent (used), Splash guard Diameter 400 mm Crodpfxjd Tyu Rs Ac Tog Taper 105 mm Bolt circle 135 Estimated age

Condition: new, functionality: fully functional, Year of construction: 2026, A STURDY GIANT FOR THE PRODUCTION OF NATURAL GAS PIPELINES Exclusive Features: • Max Pipe Length: 12.000 mm • Max Bending thickness (mild Steel): 12.000 x 28mm • 3 rolls with Variable Axis configuration • Anti-deflection System for Top roll • Anti-deflection System for Bottom Rolls • 3 rolls drive • Automatic Pipe Ejection System Capacities for Material Yield 360Mpa 12.000 x 17mm a D= 1500mm 12.000 x 15mm a D= 550mm 6.000 x 22mm a D= 1500mm 6.000 x 19mm a D= 550mm Possibility of adding interchangeable top rolls to reach Higher thickness capacities up to more than 12000x23mm or Smaller Diameters down to 400mm. Crodpogurb Hsfx Ac Teg Available immediately from the factory!

Condition: good (used), Year of construction: 1977, machine/vehicle number: 1172, Offer 23443 Technical data: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30 ° - Cutting gap adjustment by hand - Projection 200 mm - Manual backgauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirement incl. backgauge Crodperckh Sefx Ac Tjg - approx. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Crsdpfsthuzpox Ac Tog Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Codpfswkaalsx Ac Tjrg Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2009, machine/vehicle number: 150042, Offer 25328 Technical Data: - Max. cutting width: 3200 mm - Max. cutting capacity at 45 Kp/mm²: 12 mm - Frame throat depth: 175 mm - Cutting angle: 1.48° - Manual blade gap adjustment - Number of hold-downs: 13 units - Strokes per minute: up to 10 1/min - Front squaring arm approx.: 1100 mm - 2 front support arms approx.: 1100 mm each - Motorized back gauge with positioning control up to: 1000 mm - Rear area safety with light barrier - Cutting line illumination - Working height: 860 mm - Electric foot pedal - Drive: 400 V / 19.5 kW - Space requirements (approx.): W 4150 x H 2150 x D 2300 mm - Weight (approx.): 8.5 t Codsxl Rypjpfx Ac Tjrg

Condition: excellent (used), Year of construction: 2006, Technical specifications: Working width: 2100 mm Bending capacity: 28.0 mm Springback: 22.0 mm CNC control Diameter of upper roller: 350 mm Diameter of middle roller: 330 mm Diameter of side rollers: 240 mm Hardened rollers Conical bending unit by inclining the two side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (length x width x height): approx. 3600 x 1500 x 1500 mm Weight: approx. 14.5 tons Crjdpfx Acsx Dtt As Teg The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid Crodox Ii Hvspfx Ac Tsg The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3219, Offer 24295 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 16 mm - throat 270 mm - Cutting angle 2.4 ° - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 16 pcs - Motorized back gauge with positioning control 20 - 1000 mm - Front angle fence + support arms - Stroke rate depending on cutting angle and cutting length 7 - 18 per/min - Hydraulic drive 400 V / 30 kW - Table height approx. 820 mm - Space requirement incl. back gauge, without front support arms Crodpju Upafsfx Ac Tsg - approx. W 4000 x H 2400 x D 2400 mm - Weight approx. 14500 kg - with: - electric foot - switch - cutting line lighting - - cutting length preselection - Rear guard with light barrier

Condition: good (used), Year of construction: 2004, Number of T slots: 8 + 3 Jump from T to T: 280mm T size: 22mm Crodpfswu D Afex Ac Tsg Number of matching pieces:5 Length: 1250mm Width: 750mm Height: 2500mm Weight: 2900kg

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Condition: Guide slightly worn, now only suitable for rough cutting Features and technical specifications: - Cutting length: 4,300 mm - Max. clearance height: 2200 mm - Max. trimming height: 2100 mm - Max. vertical scoring height: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4,500 rpm - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm Cjdpfx Aezk N Hxec Tjrg - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 Availability: at short notice Storage location: Flörsheim

Condition: excellent (used), electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Clamping surface: Ø 1600 mm -Plate height: 70 mm -Control unit: Type ST214 -Remote control: Type KEYBOARD ST210 Crjdpfxozka Uao Ac Tjg -Connection: 400 volts -Magnetic plate weight: 960 kg -Dimensions: 1650/1600/H270 mm -Weight: 997 kg

Condition: used, Year of construction: 2008, sheet width 3050 mm Crodpfozkvx Isx Ac Tjg plate thickness 30.0 mm column arm 100 mm cutting angle 1,5° - 3,5° adjustment speed max. 200 mm/s weight 36.000 kg dimensions 4700 x 3535 x 2980 mm

Condition: good (used), 2 pcs. AMF grid panel, 415 mm x 740 mm, height 50 mm. Grid: 40 x 40 mm, with 16 H7 pilot holes and M12 threads. Codpfx Aeziwzhjc Tjrg With cast support under the panel, height 100 mm.

Condition: ready for operation (used), Wagner Electromagnetic Magnetic Chuck / Magnetic -Type: 115-30/60 -Rated voltage: 110 V Csdpfxeztcu Ij Ac Tjrg -Rated current: 1.05 A -Apparent power: 105 VA Dimensions: L x W x H 0.6 x 0.3 x 0.075 meters / Weight 90 kg Errors and omissions excepted.