Used Colchester Combi 2000 for sale (62)

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, center height: 165 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, overall weight: 900 kg, Ladies and Gentlemen, We are selling a Colchester Master 2500 lathe with Heidenhain digital readout. The machine is fully functional and can be tested on site. Availability: immediately Center width: 635 mm Center height above bed: 165 mm Center height above support: 105 mm Kedsu St S Aepfx Ag Ujll Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm. 16 steps Inner tailstock taper: MK 3 Drive power: 3.7 kW Space requirement: (LxWxH) 1700 x 880 x 1200 mm Weight: approx. 850 kg

Condition: good (used), functionality: unexamined, turning diameter over cross slide: 178 mm, spindle bore: 35 mm, turning diameter: 280 mm, center height: 145 mm, turning length: 750 mm, total length: 1,700 mm, total width: 800 mm, total height: 1,800 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 70 rpm, overall weight: 800 kg, - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 11 A - Spindle nose: D 1-3 - Morse taper in head sleeve: 3 Klsdev Iqr Ujpfx Ag Uol - Lead screw diameter: 25 mm - Thread: 6 mm pitch

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 308888, turning diameter over cross slide: 210 mm, spindle bore: 40 mm, turning diameter over bed slide: 300 mm, turning length: 1,000 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 40 rpm, Turning diameter in gap: 480 mm, tailstock quill diameter: 42 mm, tailstock quill stroke: 110 mm, - With ACU-RITE manufacturer digital display Kledpfx Aewxratog Usl - With tailstock, Multifix quick-change tool holder, and three-jaw chuck (Ø 150 mm) - Width in front of faceplate: 115 mm - Lead screw diameter: 28 mm - Thread: 6 mm - Feed (16 metric): 0.03 – 2 mm/rev - Cross slide width: 140 mm – travel: 190 mm - Top slide width: 82 mm – travel: 92 mm - Tool holder: 16 x 20 mm

Condition: good (used), functionality: fully functional, turning diameter: 400 mm, turning diameter over top slide: 240 mm, center height: 200 mm, turning length: 1,100 mm, total length: 2,500 mm, total width: 1,100 mm, total height: 1,900 mm, spindle speed (max.): 2,500 rpm, overall weight: 1,500 kg, three-jaw chuck diameter: 240 mm, TECHNICAL SPECIFICATIONS & EQUIPMENT: Operating voltage: 380 V Frequency: 50 Hz Rated current: 21 A Spindle speed: 75–2500 rpm Spindle bore: approx. 52 mm Centre distance: 1100 mm Centre height over bed: approx. 200 mm Swing over bed: 400 mm Centre height over cross slide: 120 mm Swing over cross slide: approx. 240 mm The machine is equipped with a tailstock, a Multifix tool holder, and a 3-jaw chuck Diameter: 240 mm Including two-axis digital readout by manufacturer FAGOR REFERENCE NUMBER: 14 DIMENSIONS & WEIGHT: 2500 x 1100 x 1900 mm 1500 kg PICK-UP INFORMATION: The item will be available from September 2025. A collection date must still be arranged on a specific day from 01.09.2025 onwards FCA: 73235 Weilheim an der Teck (DE), loaded onto truck Kedpow U Tn Nefx Ag Usll

Condition: used, Year of construction: 2010, functionality: fully functional, turning length: 450 mm, turning diameter: 220 mm, spindle bore: 64 mm, travel distance X-axis: 200 mm, helix angle: 60 °, TECHNICAL DETAILS Swing diameter: 440 mm Turning diameter: max. 220 mm Turning length: 450 mm Travel x-axis: 200 mm Control: Fanuc 18i-TB Helix angle: max. 60° Spindle Spindle nose: A2-5 Spindle height: 950 mm Chuck size: 170/210 mm Spindle bore: 64 mm Draw tube for bar diameter: 54 mm Inner diameter of spindle bearing: 95 mm Max. spindle speed: 3500 rpm Spindle drive: 15 kW Axes "X" axes ball screw [Ø x pitch]: 32 x 8 mm "X" axes rapid traverse: 25 m/min "X" axes pressure force: 3.75 kN "Z" axes Ball screw [Ø x pitch]: 2 x 10 mm "Z" axis rapid traverse: 30 m/min "Z" axis pressure force: 4.44 kN "C" axis resolution: 0.001° Turret Tool holder: VDI 30 Number of stations: 12 Tool shaft size: 20 x 20 mm Max. boring bar Ø: 32 mm Driven tools: 12 Max. speed: 5000 rpm Max. power: 3.75 kW Connection coupling: DIN 5480 (16 x 0.8) MACHINE DETAILS Max. energy consumption: 28 kVA Space required: 3.9 m² Machine weight: approx. 4500 kg Kjdpfx Aovtpwtog Uell

Condition: used, Year of construction: 2008, max. swing diameter over bed 510 mm max. turning diameter 260 mm Max. Turning length 540 mm travel -x axis 240 mm center height over bed 260 mm control FANUC 21i-TB spindle bore 77,5 mm no. of tools in turret 12 x tool taper VDI 40 CNC Lathe | COLCHESTER - TORNADO T8 The machine is in good condition. Please refer to further technical details in the attachement of the offer. A machine video will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Kjdpfsvzcqpjx Ag Uell #Tags: T 8 | T-8

Condition: new, Year of construction: 2025, 0330 mm 1000 mm Kljdpfx Aswp Tqzjg Ujl 167 mm 40 mm 3000 U/min DIN 55029 D1-4

Condition: new, Year of construction: 2023, 0460 mm 1500 mm 230 mm 78 mm 400 mm 2200 U/min D1-8 DIN 55029 95 mm 145 mm Kljdpfx Agswp Th Ts Usl

Condition: new, Year of construction: 2025, 0330 mm 210 mm 0635 mm 167 mm 40 mm Kedpfx Agswp Tfxo Uoll 2,2 kW

Condition: new, Year of construction: 2024, 0350 mm 196 mm 0650 mm Kljdpfswp Tpkex Ag Usl 170 mm 42 mm 7,5 kW

Condition: used, machine/vehicle number: 1457, Outer-Ø: 205 mm Klsdpfob Nxhmox Ag Uel Height: 59 mm Camlock receptacle DIN 55029: size 3

Condition: good (used), Colchester Mastiff 1400 lathe for sale. The machine comes from a workshop that has ceased operations. Fully operational and ready for use. Kjdpfxow Al T Uo Ag Ujll For more information, please contact us.

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-action tool lock Dickson No. 2 Tailstock Diameter of quill (nominal value) 63 mm Klodpfx Astr Ud Sog Uol Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length 1250 mm Machine 2500 mm Total width 1100 mm Height over all 1300 mm Cooling pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Weight 1250 mm between tips approx. 1450 kg

Condition: good (used), Year of construction: 1999, All additional equipement from pictures will come. Kedpfx Aoww Irisg Uell Technical details shown on picture.

Condition: good (used), Year of construction: 2004, Technical details shown on pictures. Parts shown by hand not come. Kjdpfxjww Haxo Ag Usll

Condition: good (used), Year of construction: 2000, Equipment: documentation/manual, LATHE TORNADO COLCHESTER 200 CNC FANUC GE Series DIAM. AUTOCENTRATING MANDRIN : 250 mm CORSE : Ksdpfx Agstuut Uo Ujll X : 215 mm Z : 400 mm TOOL MAGAZINE : 12 POSITIONS INCLUDING VARIOUS TOOL HOLDERS AND TOOLS BAR WIDTH : 65 mm TAILSTOCK IN CYCLE CHIP EVACUATOR INCLUDING ALL DOCUMENTATION

Condition: used, Year of construction: 1996, functionality: fully functional, Colchester Tornado T-80 CNC lathe production lathe for production from bar up to fi 42mm equipment head 12xVDI30 Klodpfxjwavu Re Ag Ujl Bar feeder MB1000 Collet chuck

Condition: used, Year of construction: 1986, turning diameter over bed:335 mm turning diameter over slide rest:165 mm turning length:635 mm total power requirement:2,2 kW :3 - Achsen - Digitalanzeige :Ø 40 mm :30 - 2500 U/min :D1-4 Camlock 4-jaw-chuck diameter:200 mm 3-jaw chuck:200 mm mm :MK 3 weight of the machine ca.:860 kg dimensions of the machine ca.:1700x1000x1700 mm Kedpfx Ageufud Rj Ujll digital readout:Heidenhain Machine is in good condition. Accesssories like tool holders etc come with the machine

Condition: ready for operation (used), lathe Colchester Master Kljdpod Hdqvofx Ag Usl

Condition: used, Year of construction: 2000, operating hours: 17,200 h, functionality: fully functional, machine/vehicle number: T 90077, turning length: 450 mm, turning diameter: 230 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 4,000 rpm, overall weight: 2,800 kg, - Year of manufacture: 2000 - Single owner, used in-house - Fully functional, under power, ready for demonstration - Operating hours: 17,200 h - X-axis travel: 200 mm - Z-axis travel: 450 mm - Turning diameter: 230 mm Kedpfxjxgtrks Ag Ujll - Turning length: 450 mm - Spindle speed: 4,000 rpm - Spindle bore: 52 mm - Spindle motor power: 11 kW - Control: Fanuc 21 i - Tailstock - 12-station VDI 30 turret - Chip conveyor - Weight: 2,800 kg Net price ex-works, unloaded, from location Luckenwalde (Germany), excluding transport

Condition: excellent (used), Year of construction: 2013, Alpha 1550XS - Cycle lathe incl. accessories Center distance is 1500 not 2000 Multifix holder 16 pieces Year of construction 2013 Top condition (really in top condition) Various interchangeable jaws (soft jaws) Kedounruyspfx Ag Usll steady rest face plate Spindle bore 104mm Turning over bed 550mm Three-jaw chuck 315mm

Condition: excellent (used), Lead and tension spindle lathe spindle bore 76 mm Center height 220 mm turning length 3.00 m Multifix steel holder with 5 cassettes Kledpfx Agova Ef Ts Uol Coolant device Operating instructions

Condition: good (used), Year of construction: 1999, functionality: fully functional, CNC lathe tornado A90 after renovation in 2024 tool head VDI30 equipment bar feeder collet chuck on E173 Kedpowavqxsfx Ag Uoll The machine is working can be seen in production

Condition: ready for operation (used), Year of construction: 2008, Year of manufacture: 2008 Control system: Fanuc Maximum length of the turning: 650 mm Max. turning diameter: 350 mm Spindle bore: 42 mm Maximum rotary speed of the spindle: 3500 1/min Length: 2400 mm Width: 1700 mm Height: 1500 mm Weight: 1800 kg Accessories/options: 3-jaws chuck lots of jaws collet type chuck collets steady faceplate Parat type tool holders Kodsv Tpanspfx Ag Uoll Under power in our warehouse.