Used Cnc Drilling Milling Machine for sale (65,899)

Condition: used, CNC tool milling machine MAHO, type MH 400 E Machine no. 43072, year of manufacture 1989 Travel distances X: 400 mm, Y: 250 mm, Z: 375 mm Table size 700 x 270 mm Distance spindle nose / table max. 410 mm Tool holder ISO 40 with draw bolt type B Spindle speed 80 - 4000 rpm, 18 steps Feed rate 1-1500 mm/min, stepless Rapid traverse (X, Z and Y) 2.5 m/min. Quill travel, vertical 50 mm Spindle drive 2.2 kW Power connection 400 Volt, 50 Hz, 19 kVA - swiveling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH Gbedpfeh Ic Ufsx Aikjw - hydro-mechanical tool clamping system - pivoting device for the vertical milling head - splash guard cabinet as a table enclosure with 3 fold-up doors - electrical control cabinet fixed to the machine - V24 (RS 232) interface for data transfer - 52470 operating hours, main switch on - fixed angular table - coolant system with coolant pump located next to the machine - central oil lubrication system Vogel - operator's manual, electrical wiring diagram Space requirement L x W x H 2250 x 1800 x 1850 mm Weight approx. 1.5 tons good condition

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface Gbodpou Tln Nofx Aikew - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Year of construction: 2001, condition: used, Travel X/Y/Z/W: 1500mm/1250mm/1000mm/550mm, B-axis: 360°, boring spindle diameter: 110mm, spindle speed: 4000rpm, gear ranges: 2, rapid traverse: 15m/min, tool taper: SK50, table dimensions X/Y: 1000mm/1250mm, T-slot width: 22mm, height of clamping surface above floor: 1050mm, max. table load: 6000kg, control: Heidenhain TNC 426. With electronic handwheel. Weight: approx. 13500kg. An on-site inspection is possible. Gbjdpjzwfqyjfx Aikow

Condition: excellent (used), Year of construction: 2004, - Universal milling machine, vertical head - *CNC FAGOR 8055* – the blue control panel with the full keyboard; this is a very good CNC system and is still well-maintained. - Complete protective cover, very clean - Video of the machine in operation is available, which is a significant advantage for the sale - *Make/Model:* CHALLENGER MB-20 - *Year:* 2004 - *Axes:* 3 axes with lead screws - *Control:* FAGOR 8055 - *Spindle:* NT40 – No. 40 taper Gbodpfx Ao Ai Umkeikew - *Spindle speed:* 4,000 rpm - *Power:* 5.5 kW - *Travel:* X 910 x Y 510 x Z 570 mm - *Table:* 1370 x 400 mm, 5 T-slots - *Feed rates:* 7,500 mm/min *Dimensions and weight for packaging:* - *Dimensions:* *L 3000 x W 1240 x H 2800 mm* - *Weight:* *3,000 kg*

Condition: excellent (used), HEIDENHAIN TNC-310 Working travels 500x260x480 mm (+ spindle stroke 160 mm) cross table 880x320mm Gedpfefrbtdex Aikjbw additional with Manual hand wheels Spindle speeds 100-9000 Rpm Misc accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Table specifications: Length: 900 mm Width: 530 mm Max load capacity: 450 kg Gbodpfswrdu Aox Aikjw Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Spindle taper: ISO 40 / BT / MK Spindle power: 7.5 kW Max speed: 5000 RPM

Condition: new, Drill and milling machine OPTIMUM OPTImill MB 4 - Exhibition machine - This offer includes an equipment package. The following items and options are already included in the price: - Drill and milling machine OPTImill MB 4 Optimum - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - Shank milling cutter set HSS, 20-piece, OPTIMUM - Precision machine vise FMS 100 Optimum - New exhibition machine - Gsdpfx Aou R Tftjikjbw

Condition: good (used), Year of construction: 2007, Ref. -No.: 10726 Manufacturer: DMG GILDEMEISTER Type: GMX 300 linear Year of construction: 2007 Type of control: CNC Control: Siemens 840D powerline Storage location: Halberstadt Country of origin: Germany C-axis speed: 5000 RPM Travel quill: 1500 mm Turning Diameter: 640 mm Swing Diameter: 640 mm Tool Taper: HSK63-A Spindle Speed Min.: 12.000 RPM Rapid Travel Speed X-Axis: 16 m / min Rapid Travel Speed Z-Axis: 40 m / min Travel -X Axis: 1500 mm Main Drive: 25/35 kW C-Axis For Work Spindle: Torque: 390 Nm Spindle distance: 1930 mm Spindle 1 chuck diameter: 200-315 mm Spindle 2 chuck diameter: 315 mm hydraulic tank: 30 L. coolant reservoir: 1000 L. Coolant tank at chip conveyor: 370 L. Spindle motor drive: 13,2/22 kW Bearing diameter: 80/55 mm Quill holder: 5 MK Flow rate: 20 l/min Further information: Gjdpfx As Aka Hqoikjbw The machine is offered including all available accessories and technical documentation. The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: 326289/205, travel distance X-axis: 1,600 mm, travel distance Y-axis: 450 mm, overall weight: 3,850 kg, Universal milling machine "Prvomajska GKA-30S" with a complete set of accessories. Work table 1600x450, rotatable. Accessories: - new MK40 spindle - vertical and horizontal indexing heads - complete set of mandrels MK 50 and MK 40 - consoles for horizontal milling with mandrels - operating manuals for the milling machine and indexing heads Gbjdps Agrrrefx Aikow

Condition: used, ABENE VHF 360 TI is a CNC milling machine engineered for precision work with high accuracy and reliability. Capacity: table 1200x450 mm, travels X650 Y480 Z475 mm, table load max 400 kg, spindle stroke 75 mm, swivel 0–140°, spindle nose ISO40. Specs: stepless spindle 55–4000 rpm, feeds stepless up to 4000 mm/min (X/Y) and 1500 mm/min (Z), spindle motor 7.5 kW, total power 14 kW, 3x400 V 50 Hz, machine weight ~2300 kg, footprint 3000x3000 mm. Accessories: drilling spindle, mechanical handwheels, coolant system, machine lamp. Achieves tight tolerances; typical applications: automotive, watchmaking, tooling, aerospace and medical. Gbjdps Ai R Ucefx Aikew

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, table width: 400 mm, table length: 800 mm, overall weight: 5,300 kg, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, CNC Milling Machine HURON VX8 NVU TECHNICAL SPECIFICATIONS: - Date of manufacture: November 2021 - Power-on hours: approx. 9 758 h - X-axis travel: 820 mm - Y-axis travel: 510 mm - Z-axis travel: 510 mm - CNC control: HEIDENHAIN TNC 620 - Max. spindle speed: 10 000 obr/min - Table dimensions: 800 × 400 mm - Tool magazine capacity: 24 tools - Chip conveyor - EUROCOLD H2021P473 cooling unit - 3-jaw lathe chuck - 2 HILMA NC 160 machine vises - Machine weight: approx. 5 300 kg The machine is in very good technical condition, connected to power and available for inspection and testing on site by prior appointment. Professional loading is included in the price. Accessories, tools and clamping devices shown in the photos are included in the offer only if explicitly listed under equipment. Gbodpfx Aj Aifm Teiksw Technical specifications are provided for reference only and may contain inaccuracies. The machine is subject to prior sale.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, High-precision drilling and milling machine Gsdpfj Agaruox Aiksbw Fehlmann Model Picomax 56TOP Heidenhain TNC 620, excellent condition, CE compliant!! Technical data: >> Year of manufacture: 2014, Machine No. 14214621 >> Travel ranges X/Y/Z: 500/400/400 mm >> Distance between table and spindle nose: 120-520 mm >> Clamping area (L x W): 908 x 480 mm >> Spindle speed range: 50-12000 rpm >> Drive power: 9.5 kW >> Tool magazine: Number of positions: 20 >> Footprint (W x D x H): 1700 x 1900 x 2500 mm >> Weight approx. 3000 kg About the machine: The top-of-the-line machine for manual and CNC operation with an innovative Fehlmann operating concept: user-friendly, fast, and economical. The precision milling and drilling machine PICOMAX 56 TOP (Touch Or Program™) is available with a completely new operating concept that combines 3-axis CNC operation with manual operation via drilling lever and handwheels. Specifically designed to quickly, safely, and efficiently perform milling, drilling, and threading operations on individual parts without time-consuming programming. Even after a short training period, the PICOMAX 56 TOP milling machine can be used extremely economically by skilled personnel, even without programming knowledge. Even in its basic configuration, the FEHLMANN milling machine 'Made in Switzerland' offers various features of a modern, high-performance milling machine, such as: fully digital CNC Heidenhain control TNC 620, a Fehlmann-specific, liquid-cooled, and high-torque motor spindle for universal milling up to 12,000 rpm, as well as Z/S-interpolated threading, 3D milling, and turning. The tool holders and accessories (see pictures) are included. Absolutely excellent condition. Mechanically and electrically inspected. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: excellent (used), Year of construction: 2008, operating hours: 50,236 h, functionality: fully functional, travel distance X-axis: 2,360 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 9,000 rpm, For sale is a 6-axis machining center from AXA, model VHC 2-2360-XTS / 50. The machine is in good condition and fully functional, has only been used for light machining such as aluminium. Of particular note: Each of the two NC tables allows clamping of workpieces up to Ø1,100 mm – see drawing. A fixed milling table can also be mounted. A high-speed spindle insert SK50 is available for this machine. Technical data: Year of manufacture: 2008 Controller: Heidenhain iTNC 530 Machine on: 50,236 hours Spindle hours: 16,319 X-axis: 2,360 mm Y-axis: 600 mm Z-axis: 800 mm Spindle taper: SK 50 Spindle power: 56 kW Torque: 355 Nm Tool changer: 52 positions on 2 chains NC rotary tables (2 pieces) Type: SKH-NC 7/T Table plate: Ø 630 mm Max. load: 750 kg Clamping: Hydraulic Dimensions: 5,650 mm x 3,700 mm x 3,200 mm Weight: approx. 22,000 kg Equipment: IC coolant system with 50 bar high-pressure pump, belt filter, Heidenhain RCN 729 measuring system, 3D probe Renishaw OMP 60, electronic handwheel, 2x Visiport (inspection windows), chip conveyor. Tool holders are not included in the offer, but can be supplied at additional cost. Godoyi Er Aepfx Aikjbw Transport and loading can be organized throughout Europe on request for an additional fee. Prices are subject to VAT. Inspection possible by appointment. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase and sales – BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For further information or to contact us, please visit our website.

Condition: new, Year of construction: 2027, functionality: fully functional, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 400 mm, workpiece weight (max.): 200 kg, spindle speed (max.): 26,000 rpm, number of slots in tool magazine: 30, CNC machines from HG GRIMME SysTech Perfect for: Highly efficient 3D milling for small workpieces – precise milling with high part output Materials: Plastics, composite materials such as CFRP / GFRP, model-making materials, aluminum Gbjdpfx Aio Adqr Tskow Industries: Automotive, aerospace, transportation & logistics, leisure industry, sanitary, boat building, automation Availability: March 2027 Model: 5-axis CNC milling machine RT-F 1400 Spindle data: 8 kW / 6.4 Nm; 1000-36000 1/min; HSK E 40 Rapid traverse X/Y/Z: 80/80/60 Part dimensions X/Y/Z: 1000 x 800 x 400 Control system: Fanuc with IPC, handheld terminal HMOP Type B Tool changer: 12 tools Tables: 1 rotary table Vacuum system: yes Tool breakage and length monitoring: Renishaw-TS 27 R Other: Chip tray, perforated metal grid, sheet metal for extraction on the rear Year of manufacture: 2026 Condition: new

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS Gbjdpstnh Aljfx Aikow SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS

Condition: used, Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 510 mm, total height: 3,250 mm, total length: 3,545 mm, total width: 3,970 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, Equipment: chip conveyor, For sale is a high-precision Hurco VTXU vertical 5-axis machining center with a swivel rotary table. The machine is in very good cosmetic condition. Technical data: Year of manufacture: July 2008 Control: WinMax (dual-screen) Travel distances X / Y / Z: 800 x 700 x 510 mm Swivel range A-axis (tilting axis): -30° to +110° Rotation range C-axis (rotary table): 360° (full range) Rotary table diameter: 610 mm Table load: max. 400 kg Distance spindle nose - table: 150 - 660 mm Max. spindle speed: 12,000 rpm Spindle power: 18 kW Torque: 237 Nm Tool holder: SK 40 Magazine capacity: 48 tools Max. tool length: 280 mm Max. tool weight: 7 kg Tool change time chip-to-chip: 8 sec. Voltage: 400 V / 50 Hz Connected load: 55 kVA Compressed air requirement: 6 - 8 bar Gbjdpfezvd U Uex Aiksw Machine dimensions (W x D x H): 3,545 x 3,970 x 3,250 mm Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: new, Type XL-2812S Processing wood length 150mm~3050mm Gbjdo Aidcnspfx Aikew Processing wood width 40mm~1200mm Processing wood thickness 10mm~60mm Max moving speed of x-axis 150m/min Max moving speed of Y-axis 90m/min Max moving speed of Z-axis 45m/min Drill group vertical drilling 7 pieces*2 Drill group horizontal drilling (2 x 2)pieces Drill down vertically 6 pieces Drill group power 2.2KW×2 Lou milling spindle mode Er3 Lou milling speed 18000r/min Lou milling spindle power 3.5kw×2 Workbench height 900mm Lord enters the diameter of the suctionpipe 150mm Total power 19.8kw Operating voltage 380V 50HZ Working pressure 0.6-0.8Mpa Weight 3500Kg Dimensions 5500mm×2750mm×2300mm Price 28500 Eur (EXW Jonava, Lithuania)

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, total height: 2,700 mm, total width: 1,700 mm, total length: 2,000 mm, power: 0.01 kW (0.01 HP), CNC-Drilling and Milling machine, Control Heidenhain TNC 426, only 8500 h table size 380x920 mm, travel X/Y/Z/W - 500/350/610 mm, max. table load 250 kg, spindle speed stepless 50-10'000 rpm., spindle performance 10,2 kw, drilling capacity Ø 25 mm, tapping capacity M20, taper SK 30, tool changer 24 places, elektronic handwheel, central lubrication, oil mist filter, coolant refigitor, preparation for spindle coolant + Renishaw, lot of tools and holders, manual Gbedpfstvmtksx Aiksw

Condition: ready for operation (used), Year of construction: 2000, Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts. Gjdex Tpytjpfx Aikobw

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4.5 kW (6.12 HP), number of axes: 3, overall weight: 880 kg, table length: 2,500 mm, table width: 1,300 mm, Equipment: CE marking, documentation/manual, Any shape or form may be cut, engraved, or 3D milled using this universal CNC router. The Wattsan M1 6090 can create décor, furniture, advertising, and packaging. This machine is compatible with several materials, including wood, MDF, chipboard, acrylic, plexiglass, PVC, composite, and aluminum. The working table of the Wattsan M1 6090 is 600x900x200 mm. A 2.2 kW spindle and a T-slot table are part of its basic design. Compared to the A1 6090 model, the processing depth may be increased by 20% in a single pass thanks to the 300 mm portal height. You can give our managers a call for additional details! Wattsan M1 6090 characteristics Working area: 600x900 mm Spindle: 2.2 kW Gedpfxjrvh Ebj Aiksbw Machine size: 1380 x 1500 x 1890 mm Weight: 400 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Mikron UM 710/900 Universal Milling Machine High-precision universal tool milling machine from the Swiss quality manufacturer MIKRON, model UM 710/900. The machine comes from a well-maintained environment and impresses with the renowned Mikron precision and the generous working area (up to 900 mm travel in X). It is ideally suited for toolmaking, prototype construction, training, or demanding repair workshops. Technical data at a glance (manufacturer's specifications): Working area & axes: Longitudinal travel (X-axis): 710 / 900 mm Transverse travel (Y-axis): 630 mm Vertical travel (Z-axis): 500 mm Spindle: Tool holder: SK 40 / DIN 69871 Gear stages: 4 Speed range: adjustable (vertical & horizontal) Main drive & feed: Spindle drive power: 11 kW (at 44% duty cycle) / 7.5 kW (at 100% duty cycle) Feed rate (X, Y): 0 – 10,000 mm/min (programmable) Feed rate (Z): 0 – 8,000 mm/min (programmable) Rapid traverse (X, Y / Z): 10 m/min / 8 m/min Gbjdpfxozcqcgj Aiksw Clamping table (rotary table): Clamping surface: 600 x 1,200 mm T-slots: 9 pieces (14-H7, spacing 63 mm) Max. table load: 500 kg Electrical system, dimensions & weights: Connected power: Total installed rated power 21.5 kW Operating voltage: 3 x 400 V - 50 Hz Coolant system: 150-liter capacity Machine weight: approx. 4,300 kg (including safety enclosure) Product video "Everything from a single source: We would be happy to offer you a suitable bank financing solution for your project." You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, year of last overhaul: 2024, Well-maintained drilling machine for sale due to expansion; it was also overhauled in 2024 and has been in our inventory since 2024. Gbsdpjzhby Sofx Aikow

Condition: good (used), Year of construction: 2006, functionality: fully functional, Overhauled: 2014 Gbedpfx As Adn Rgoiksw Control system: Heidenhain iTNC 530 Table: 10,000 x 3,000 mm X-axis travel: 10,000 mm Y-axis travel: 4,200 mm Z-axis travel: 1,100 mm Distance between columns: 3,500 mm Distance between table and spindle (without head): 2,000 mm Distance between table and 45° head: 1,298 mm Table load capacity: max. 30,000 kg Rapid traverse rate: 10 m/min Feed rates: 6 m/min Spindle speed: 3,000 RPM Spindle power: 40 kW 3 heads: 1. Vertical, integrated, 2. Universal orthogonal head 1°, 3. Universal twist head

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 12,666 h, power: 12 kW (16.32 HP), MACHINING CAPACITIES: - X-axis (U) vertical milling travel: 3875 mm, 3170 mm between stops - Y-axis (V) milling travel: 1390 mm between stops, for drilling: 1201 mm - Z-axis (W) milling travel: 290 mm Maximum workpiece height (thickness), effective travel: 110 mm For further details, see aggregate travel schematic - Maximum traverse speeds: X-axis (U): 60 m/min Y-axis (V): 50 m/min Z-axis (W): 20 m/min MACHINE CONFIGURATION: - Worktable with 6 mobile support beams, equipped with several vacuum pods and pneumatic clamps 2 pneumatic connections per beam for clamps, usable capacity ranging from 44 to 78 mm 6 rear stops 6 intermediate stops 3 right lateral stops 3 left lateral stops 4 lifting blades (for loading/unloading assistance) Table divided into 2 working zones - Becker VTLF vacuum pump 250 m3/h, 5.5 kW with air filter Gbsdpfx Aey Nb Tkjikew - Pfannenberg cooling unit 1.7 kW - Chip conveyor belt - X-axis movement by rack and pinion, Y & Z axes by ball screw and bearing block (high-precision linear guides with automatic lubrication) - Aggregates on swan-neck, composed as follows: • 12 kW HSD milling/routing unit - Toolholder type: HSK 63 F - Variable spindle speed 6000 - 24000 rpm - Inverter-controlled - Surround extraction hood - Onboard tool magazine with 10 stations + additional 12-station magazine • 11-spindle drilling unit, 1.7 kW - Center distance between spindles: 32 mm - Spindle speed: 4000 rpm - 11 vertical spindles (8 along X, 3 along Y) - 2+2 horizontal spindles on X - 1+1 horizontal spindles on Y • Control panel - Windows PC - Network card and Ethernet connection - Software: Masterworks and user manual - DXF conversion and direct execution of ISO, TLF, DXF - Pre-programmable zones - Remote control OTHER FEATURES: - Overall electrical supply: 400V, 3Phases+N+E, 50Hz Nominal current: 58.6A, 46.6 KVA - Pneumatic supply: 7/8 Bar - Average consumption: 100Nl/min - Extraction Lower port Ø120 mm, upper port Ø250 mm Recommended flow rate: 6500 m3/h at 20 m/s - CE certified, safety zones and protective grille Lockable isolator, emergency stops Operating footprint: see schematic Transport dimensions: to be specified during equipment preparation Estimated total weight: 2400+350+350 kg Please contact us for supply of consumables, accessories and/or extraction systems. Original documentation, manual, spare parts list, electrical and pneumatic diagrams, service keys, software and license keys included.

Condition: ready for operation (used), Fehlmann Picomax 50 drilling machine with threading unit Speed: 125 - 4400 RPM Feed: 0.03 - 0.40 mm Drilling capacity in steel: 22 mm Threading unit Spindle stroke: 120 mm Stroke: 430 mm Accessories: see pictures You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! Gbjdpfxezzvxij Aikow You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.