Used Clamping Angle for sale (14,415)

Condition: used, length 500 mm width 250 mm height 80 mm weight 90 kg The magnetic clamping plate is in good, ready-to-use condition. Hjdpfx Aswth S Ieicofk Length: 500mm Width: 250mm Height: 80mm Weight: 90kg

Condition: used, length 900 mm width 505 mm height 110 mm weight 310 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Hedewth Tfjpfx Aicsfk Length: 900mm Width: 505mm Height: 110mm Weight: 310kg We have two identical magnetic chucks with the same dimensions. See S9062

Condition: excellent (used), length 690 mm thread M16 height 1020 mm weight of the machine ca. 360 kg Angle table with breadboard table LxWxD: 1020x690x40 mm Fixing LxW: 330x690 mm Thread: M16 Weight: 360 kg Hfedpfxjzcgk Ts Aicsk

Condition: new, weight / kg taper MK / Berg Spanntechnik BERG 376.14917.000.0 Q1107 Hydraulic clamping head New/new. Price is per piece. 2 pieces available Typ: SPH20 d1: 85mm d2: 105mm d3: 125mm d4: 85mm Gewinde: 6xM8 l1: 54mm Hfsdpfeymgbaox Aicek l2: 56mm FS: 20kN P: 80 bar

Condition: used, length / mm width / mm Hjdpfx Aijy S Dzpocofk

Condition: used, weight / kg taper MK / Hfsdpfoibnnkox Aicjk

Condition: used, weight / kg Hedpoxwdyajfx Aicofk taper MK /

Condition: used, length 575 mm width 510 mm height 1015 mm Clamping table, clamping plate, T-slot table Hodeylz Edjpfx Aicsfk Dimensions Table length: 575 mm Table width: 510 mm Table height: 1015 mm

Condition: good (used), clamping plate, welding table, welding table, straightening plate, straightening table -Clamping plate: with base frame -Clamping surface: 4400 x 2200 mm -Table height: 875 mm -Plate thickness: 30 mm -Flatness: see photos (straightening sheath not included) -Transport dimensions: 4000/2200/H875 mm Hfsdpfx Aisv E Edmecjk -Weight: 2222 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Technical characteristics: Section modulus 100 cm³ Main shaft diameter 130 mm Side shaft diameter 130 mm Outside diameter of the bending rolls 410 mm Adjustable rolling speed 0-6 m/min Installed power 18.4 kW (25 hp) Length 1,900mm Width 2,200mm Height 1,900mm Weight 5,720 kg Standard equipment: Hydraulic adjustment of the side rolls 3 rolls driven (3 hydraulic motors + 3 planetary reduction gears) Independent lateral profile guide rolls, adjustable in 6 directions, fully hydraulic Automatic scope rotation speed compensation Complete universal rolls set for standard profiles and beams (12 pieces) Tool kit for machine equipment Low-voltage control on mobile operator panel Safety device according to regulations Technical documentation and CE certificates Hjded Eqg Nspfx Aicofk Digital displays for the roller position of the side rollers Optional, installed: Siemens NC control PGS-CLASSIC

Condition: new, functionality: fully functional, Year of construction: 2026, Specifications R-62 Standard rolls diameter: 460 mm Diameter of the central / side shafts: 180 /160 mm Motor power: 15 kW Rotation speed: 0-7m/min Net weight: 8,000 kg Standard version R-62S: Vertical working position Hydraulically variable speed of rotation on all three rolls with hydraulic motor. one motor for the top roll, one motor for the side rolls Automatic speed compensation between top and side rolls Hydraulic adjustment of the side rolls Hfsdpeiinllefx Aicjk Digital displays for the position of the side rolls Fully hydraulically adjustable guide rolls SKF ball or roller bearings in all journals Hardened gears running in oil Hanging control unit with mini joysticks for all control functions with digital displays Emergency push button Complete set of adjustment tools Operating and maintenance manual

Condition: new, functionality: fully functional, Year of construction: 2026, RCMI 280 Three-roll profile bending machine Technical characteristics: Section modulus 720 cm³ Main shaft diameter 280 mm Side shaft diameter 280 mm Outside diameter of the bending rolls 720 mm Adjustable rolling speed 0-4 m/min Installed power 44 kW (60 hp) Weight 34,000 kg Standard equipment: Hydraulic adjustment of the side rolls 3 rolls powered (3 hydraulic motors + 3 planetary reduction gears) Hfsdpsiivhdjfx Aicjk Independent lateral profile guide rollers, adjustable in 6 directions, fully hydraulic Automatic scope rotation speed compensation Complete universal rolls set for standard profiles and beams (12 pieces) Tool kit for machine equipment Low-voltage control on mobile operator panel Safety device according to regulations Technical documentation and CE certificates Digital displays for the rolls position of the side rolls

Condition: used, This listing is for the Eppendorf Fixed Angle Rotor FA-34-6-38 Hfjdpfx Aijyx Ur Escek The unit is in full working condition and ready for immediate use. Designed for high-speed centrifugation, this rotor accommodates up to 6 x 38 ml tubes and ensures reliable sample separation with precision engineering and durable construction. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for Eppendorf Fixed Angle Rotor FA-45-24-11 The unit is in full working condition and ready for immediate use The Eppendorf FA-45-24-11 is a high-performance fixed angle rotor designed for efficient sample separation in centrifugation applications. Built for precision, it supports consistent results in research and laboratory workflows, offering durability and reliable operation for demanding environments Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Hjdpfx Aisyx Uwzocjfk • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Year of construction: 2000, length 800 mm width 800 mm Hfjdpfx Aoznnd Doicsk height 1000 mm total power requirement 0 kW weight of the machine ca. 700 kg dimensions of the machine ca. 800 x 800 x 1000 mm

Condition: used, Year of construction: 2000, length 800 mm width 1000 mm height 1300 mm total power requirement 0 kW Hodpfx Aioznndqocsfk weight of the machine ca. 900 kg dimensions of the machine ca. 800 x 1000 x 1300 mm

Condition: new, Year of construction: 2014, operating hours: 46 h, load capacity: 300 kg, lifting height: 1,850 mm, fuel type: electric, mast type: duplex, construction height: 1,500 mm, Manufacturer + model: LINDE L 16 (372) Mast: 2W1850 + KAUP / Drum clamp ID: 23032.5921 Category: Demo Mast: 2W1850 Lowered height: 1500 mm Lifting height: 1850 mm Year: 2014 Hours: 46 Capacity: 24 V / 345 Ah Hfodpszut Tdofx Aicjk Options: Equipped with a SELF-SUPPORTING drum clamp -> KAUP 0.8 R405 Drum clamp reach = 450 to 850 mm

Condition: good (used), Year of construction: 1996, Angled conveyor belt Axmann 4066 warehouse no.: 503611 type / device: belt conveyor manufacturer: Axmann type: 4066 year of construction: 1996 Angled conveyor belt Discharge height approx. 1290 mm + 370 mm adjustment range Mobile on casters Bending range approx. 2000 mm Hodpfx Asw N Rm Sjicsfk discharge height: 1290 mm (+ 370 mm) Belt width: 250 mm Belt length: ca. 4000 mm (2 x 2000 mm) distance of the slats: 410 mm height of the slats: 20 mm

Condition: good (used), diameter 250 mm amount 1 STK weight 37 kg Pratt Burnerd 6-jaw self-centring chuck (6 Jaw Griptru Scroll Chuck), Ø 250 mm – catalogue number 1260-02505. -->> Special feature of the 6-jaw chuck: Technical data – Specifications Type: 6-jaw self-centring chuck --> Model: l1260-02505 --> Outer diameter: 250 mm --> Number of jaws: 6 --> Through bore: approx. 75.9 mm --> Centring recess: 200 mm --> Mounting: 3 × M12 on 224 mm bolt circle --> Design: Rear mounting / Plain Back --> Clamping system: Scroll chuck (self-centring) --> About the model number Hjdpfx Aiozupmtscefk

Condition: like new (used), number 7 Stück weight 3,75 kg/Stück range L-W-H 175x 75 x 130 mm Multi Quick MQ 110 Set – (Item No. 110-091-2022 – Clamping force 40 kN) This infinitely adjustable clamping element is characterised by maximum horizontal and vertical adjustability thanks to an integrated support plate. Applications include plastics technology, machining and metal forming. Hfodjzuplvepfx Aicjk --> high clamping force --> low tightening torque Price per unit, discount for bulk purchases

Condition: good (used), weight 35 kg amount 1 STK tension force 40 kN Röhm NC Compact Clamp RKK With standard jaws SA and normal jaws SGN—optimized for maximum working precision on CNC milling machines and machining centers with very high working precision. Size 1: Mechanical-hydraulic clamping system. Sizes 2-5: Mechanical- mechanical clamping system. Drive spindle with clamping force presetting, Hfodpjzuplpofx Aicok deformation-resistant design for maximum clamping accuracy, mounting thread for workpiece stop, clamping surface for clamping claws, With grease nipples on both sides, all guides subject to wear and the spindle thread can be lubricated quickly and easily—Stable steel base body and all guides are hardened and ground on all sides, Size 1: Long clamping slide with cross offset, hardened on all sides, functional surface ground, Size 2-5:

Condition: used, Technical details: Hfedpfevfduwox Aicjk length: 1200 mm width: 500 mm height: 1260 mm

Condition: excellent (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table -Clamping surface: 3000 x 2000 mm -Quantity: 3 mounting plates available -Price: per piece -Note: The mounting plates can be screwed together end-to-end, as the end faces are milled. -Possible clamping surfaces: 3x 3000 x 2000 mm (1x 9000 x 2000 mm) (1x 6000 x 3000 mm) -Sheet thickness: 60 mm -Plate: with supporting ribs -Dimensions each: 3000/2000/H360 mm -Weight: 4500 kg/unit Hjdpew Dzk Eefx Aicsfk

Condition: like new (used), High volume production of small components including stair wedges, stair glue blocks, corner blocks for chairs, filler pieces, and more. Key Features: Self centring grippers and centreline cutting with angles of +/-60 degrees. Hopper fed with a standard length capacity of 1350mm - components are collected in box underneath. Hfjdpfx Aiozd Uxmscsk Produce up to 800 pieces per hour. Small footprint to maximise floor space. Condition - As New [only been used for showroom demonstrations.] 1350mm x 200mm x 80mm Capacity Cutting thickness from 10mm to 80mm Cutting width from 10mm to 200mm 3 seconds per operation - feeding, cutting & drilling = 9 seconds Up to 60m/min advancement speed 4kW saw motor +/- 60 degree rotation - mechanical adjustment Completely enclosed interlock saw cabin Outfeed conveyor belt

Condition: used, Hydropneumatic corner connection presses with support arms and new foot pedals Profile height max. 140 mm Stanzhöhe max. 93 mm Punching hub: 15 mm Hodpfxozrmcmj Aicofk Presskraft 45 kN Weight approx. 280 kg