Used Camp Ground for sale (2,156)

Condition: good (used), Technical data for the pallet racking system: Racking system: Arestant Nsdpfxjz Azyuj Abyjdc Type: AS Technical data for installation: Number of racking bays: 01 unit Length per racking bay: 19,575 mm Number of bays per racking bay: 07 units Number of levels including base level: 04 units Technical data for capacity: Pallet spaces per bay: 12 units Pallet spaces per racking bay: 84 units Total pallet spaces: 84 units Based on: Load support: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.d. Weight per pallet (max.): 400 kg Included in the scope of delivery: 08x Pallet racking uprights, used Material color: blue Frame profile: 8808 Profile dimensions: 80 x 80 x 1.50 mm Pitch hole: 50/50 mm Includes cross and diagonal braces, Base plates The uprights are pre-assembled (bolted framework) Height: 5,000 mm Depth: 1,100 mm 42x Pallet racking beams, used Material color: orange Box profile: 80 x 40 mm Agraffe: 4 HK (hooks) Clear span: 2,705 mm Max. load per pair of beams: 1,200 kg, with evenly distributed load. (Observe bay load) 84x Safety pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 32x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 16x Leveling shims, used Design: completely galvanized for leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and frame loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any further transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Year of construction: 2026, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. Ndodpfx Aboz E Im Deyoc The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2026, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Ndedpfjz E Ipxjx Abyjc Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Condition: refurbished (used), Shaft milling cutter, Grooving milling cutter, Corner milling cutter Nsdpfx Ajiuh E Iebyedc Manufacturer: Walter Type: Prototyp P 31 23017-20 Shaft diameter: 20 mm Cutting diameter: approx. 19 mm Cutting length: 38 mm Used, freshly ground and coated Material: HSS Co

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 50,000 l, Heating oil tank – storage tank – diesel tank – tank system – steel tank brand new – with a capacity of 50,000 liters – according to EN 12285-2 – Class B – (replacement for DIN 6616), above ground, double-walled, including test certificate, Njdoi A Hz Aspfx Abyjdc suitable for installation in areas of seismic zone 0. The tank has two saddle supports, a manhole with a dome cover, and is equipped with the following fittings: 1 filling pipe with a TW closure (filling cap) and dip tube, 1 gauging pipe with a gauging rod and gauging rod closure, 1 vent pipe with a vent cap, 1 brand new limit switch with type approval (AIII), 1 ladder and 1 spare socket for withdrawal purposes, 1 optical leak detection device with type approval and leak detection fluid. The tank will be sandblasted, primed, and painted white externally / RAL 9016 color (sample photo). (Other RAL colors are also available on request!) L = approx. 10.70 m – D = 2.50 m – Weight approx. 9.5 tons – ex works, loaded free of charge – General: You will receive an invoice with VAT shown. The purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental systems are also available! In addition, we purchase existing tank systems and can, with certified specialist company qualifications in accordance with the German Water Resources Act (§ 62 WHG), professionally empty, clean, dismantle, and transport them away.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: og30, tank capacity: 30,000 l, with this 30m³ storage tank you can store diesel or heating oil above ground Ndedpfx Abeb Hn Udeyoc

Condition: used, mileage: 141,000 km, power: 125 kW (169.95 HP), first registration: 01/2010, overall weight: 3,500 kg, fuel type: diesel, color: green, next inspection (TÜV): 03/2026, gearing type: mechanical, emission class: euro5, loading space width: 2,025 mm, loading space length: 2,850 mm, loading space height: 340 mm, Year of construction: 2009, total length: 6,180 mm, total width: 2,100 mm, total height: 2,350 mm, number of seats: 7, Equipment: ABS, central locking, parking heater, soot filter, First owner. German municipal vehicle used for daily grounds maintenance. Only 141,000 kilometers total mileage. Regularly maintained in the authority's own workshop. Double cab with 7 seats and 4 doors. Unladen weight: 2660 kg. Permissible total weight: 3500 kg. 3.0-liter Iveco diesel engine with 2998 cc and 170 hp / Euro 5 + EEV. 6-speed manual transmission. 156 km/h. Auxiliary heater (hot water). Rockinger ball-type trailer hitch with 2800 kg braked trailer load and 750 kg unbraked trailer load. Electrically adjustable exterior mirrors. ABS and ASR. Central locking (1 remote key and 1 key without remote are included, both are original from IVECO). Radio/cassette. Airbags for driver and front passenger (according to the cockpit display, "airbag defective". According to the diagnostic device, the fault lies in the malfunctioning seatbelt pretensioner in the center seat in the front). Suspension: Transverse leaf spring at the front. Reinforced parabolic springs at the rear. Ndedjxthdujpfx Abysc Wheelbase 3450 mm. Body: Tipper body from SAXXAS, German production, with the following body dimensions: 2.85 m long / 2.20 m wide / 0.34 m high. Electro-hydraulic three-way tipper. Steel floor with 6 recessed lashing eyes. Plastic storage boxes for small items on both sides. Yellow rotating beacon on the cab roof. This offer is only valid for commercial businesses, freelancers of all kinds, or government agencies. Subject to prior sale and errors. The purchase price is subject to the differential tax rate according to §25a UStG, as it is a government vehicle. Therefore, no additional 19% VAT will be added to the purchase price, but the VAT cannot be deducted separately from the purchase price either.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Automatic creasing machine with feeder Ndsdpfx Abjz N Hp Heyoc Year 2014 Infeed width up to 330 x 450 mm 12 programmable lines with a minimum spacing of 1 mm and a crease line of 1.2 mm Digital colour TFT display with all data visible at a glance Power supply: 220 V, 50 Hz, 1.5 amps, with ground wire

Condition: used, Electric pallet stacker - pedestrian stacker, drawbar stacker for the ergonomic handling of small loads Manufacturer EXPRESSO, Model Lift & Drive 225 (lift2move) Serial No. 19153-HD, Year of manufacture 2010 Type No. Rated load capacity 225 kg Lifting stroke 1770 mm Lifting height 2350 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Outreach of lifting arm 400 mm Chassis length 1130 mm Ground clearance 90 mm Nodpoflt Egofx Abyodc Underrun length 600 mm Chassis design (front / rear) Ø 80 / 150 mm (2 fixed / 2 swivel casters) Overall length 1130 mm Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with spiral cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Battery charge indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually movable, swivel casters with three-stage parking brake - Handlebar infinitely adjustable in height - Load receiving flange according to EXPRESSO standard 380 x 50 mm / 4 mounting holes M10 at a distance of 100-120-100 mm Mounted lifting attachment: Quadruple lifting fork, Expresso type, load capacity of the lifting attachment 40 kg - Lifting attachment can be swivelled by 90° by hand (can only be locked in the 0° position) - Lifting attachment can be moved laterally by +-100 mm on linear guide (locking only in the center) - Width between the support arms 320 mm - Height between the support arms (height can be locked at) 365 / 400 / 450 mm (max. opening width without locking hole 510 mm) - Depth between the support arms 150 mm to the stop bolt / 300 mm maximum Total weight 100 kg Good condition

Condition: used, Year of construction: 2004, Technical details: table diameter: 400 mm table turning speeds: stufenlos U/min tilting range table plate: 90 ° voltage: 230 V / Hz V Njdpfxou Nkxhj Abysdc connected load: 11,8 kVA machine weight approx.: 220 + 173 kg POSITIONER - ROTARY TABLE with welding source Messer Griesheim Application: for circumferential seam welding Welding device: Welding rectifier Messer Griesheim Variomatic 40 for MIG-MAG, direct current; protection class IP 23; cooling type F with remote control Stepless current/drain feed, 4.0 meter hose package Torch head Ground clamp/ground cable Size: L: 1.1 x W: 0.5 x H: 1.3 Weight approx. 279kg Welding turntable MB Milano, TGA 75: swiveling welding turntable up to 90° allows horizontal and vertical welding (direction of rotation left and right) Infinitely variable speed; operation via control panel and/or foot control stands on transport trolley Size: L: 0.8 x W: 0.6 x H: 1.3 Weight approx. 173kg Wire feeder type Eurotrac SLV, feed rate 1.2 - 18 m/min *

Condition: used, Technical details: length: 750 mm height: 800 mm welding current: 120 machine weight ab.: 180 kg dimensions L x W x H: Schweißgerät: 0,75 x 0,52 x 0,8 m Nsdou R A Dlopfx Abysdc dimensions L x W x H: Kompressor: 1,2 x 0,5 x 0,9 m Plasma cutter with piston compressor optional cutting device: make Jäckle, year: 2005 - cutting power 30 kVA - TIG / E-welding - cooling type F - with torch package 6,0 meter - with ground cable 12,0 meter OPTIONAL: piston compressor: make Schneider type Universal 650-60D, year: 1993 - filling capacity 500 liters/min. - volume flow 616 liters/min. - Compressor pressure 10 bar - power max. 4 kW - incl. compressed air hose approx. 4 meters - mobile on two wheels *

Condition: used, Technical details: Ndsdpfx Ajwqpl Debysc Length: 1120 mm height: 1480 mm power consumption: 500 A capacity at 100% ED: 390 A capacity: 23 KVA welding current: 390 V weight of the machine approx.: 234 kg dimensions of machine: 1,12 x 0,58 x 1,48 m capacity: 23 kVA Hose package with welding gun Ground cable *

Condition: used, Technical details: welding current: 500 A weight of the machine approx.: 129 kg dimensions L x W x H: 1,1x 0,7 x 1,2 m Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Cooling system: Water-cooled with frost protection Shielding gas: Solenoid valve without pressure reducer 3.0 m hose package Torch head: Gas-cooled Ground clamp with ground cable 2.5 m Wire feed: 4 roller drive with wire Ø 1.0/1.2 mm Ndsdpfxjwtctmj Abyjc *

Condition: used, Year of construction: 2011, Technical details: bore capacity in steel (diameter): 35 mm throat: 350 mm bore stroke: 180 mm threading: ST M 24 mm spindle taper MT: MK4 spindle speed:: 50 - 1450 U/min Distance spindle/table max.: 780 mm table clamping surface:: 560 x 560 mm weight of the machine ca.: 500 kg dimension machine approx.LxWxH: 0,73 x 0,56 x 0,22 m Heavy-duty, solid cast-iron construction Automatic gear lubrication via oil pump Smooth and quiet operation thanks to precision-ground gears running in an oil bath High spindle concentricity thanks to the hardened and ground main spindle Thread-cutting device up to M24 in steel Main switch and motor protection switch Mechanical quill feed, 2 stages: 0.1 / 0.2 mm/rev. Coolant system Adjustable drilling depth stop 18 spindle speeds from 50 to 1,450 rpm 9 selectable speeds via gear selector levers in combination with a two-speed motor Nodpfxeyli Sfo Abyedc *

Condition: used, Technical details: welding current - continuous: 320 / 100 A protection class: IP21 total power requirement: 17 kVA kVA weight of the machine approx.: 132 kg dimensions of machine: 1,3 x 0,5 x 0,9 m Ndsdeu Nwa Sspfx Abyoc - TIG welding with direct current - TIG welding with pulsed current - E-hand welding Control switchover 2/4 cycle spot welding, stepless New components like: -hose package 4,0 meter, water cooled -ground tongs and ground cable 4,0 meter -pressure reducer -TIG welding torch ERGO 301 *

Condition: used, Technical details: power consumption: 350 A total power requirement: 17,5 kVA weight of the machine approx.: 64 kg dimensions of machine: 0,65 x 0,32 x 0,5 m Welding rectifier/inverter MIG/ MAG:40A / 14V up to 350A / 31,5 V Ndsdpeu Nwd Djfx Abyec TIG: 10A / 10V up to 350 A E-welding: 15A / 20,5V up to 350A / 34V Voltage U1: 380 - 415V Cooling type: F (water cooled) Protection class: IP 23 without hose package without grounding cable *

Condition: used, Technical details: floor-plate length: 255 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) * Ndjdpeu N D Icjfx Abyec

Condition: good (used), Year of construction: 1993, functionality: fully functional, Schaublin 102 N - VM, Machine number BL 330699, Year of manufacture approx. 1993, Machine with leadscrew, Centre height 102 mm, Leadscrew: diameter 40 mm, hardened and thread ground. Leadscrew pitch: 4 mm. Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Threading range: Metric: 20 pitches from 0.25 to 4 mm. Imperial (inch): 25 pitches from 80 to 6 tpi. Centre distance 450 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, Spindle speed up to 2,800 rpm, Ndsdpfszlc Apox Abysc Tailstock, Accessories,

Condition: used, Year of construction: 1986, functionality: fully functional, We offer this used Brenta vertical bandsaw with an automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type: Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type: Progress 750 Machine no.: 409621 S268 N1143886 Maximum sawing length: 12 meters The various photos show: - overall view of the saw - saw machine plate - saw with dust extraction pit - automatic line behind the saw - pit under the lower wheel - feed line from the outside - feed line as seen from the inside - discharge line inside - additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain - collection bin behind the discharge line - collection bin as seen from the other side. With a red button that can be operated from here and in the machine room - discharge line in its entirety - machine plate for the saw carriage - saw carriage in the outside position, where the log can be placed - control room behind the saw - control room for electronic dimension setting and operation of all feed and discharge lines - electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually Ndodpfxsyxhq Uo Abyec - Compressor: Atlas Copco GX 11 FF - Type plate compressor, year of manufacture 2005 - Air dryer: Grass Air type DW 31 - Stellitem adjustment blocks for the guides through which the saw blades pass Technical information: - the machine must be operated with air, hydraulics, and electricity (and control current) - the wheels (upper and lower) were ground approximately three years ago and can last for many more years - control cabinet for the feed line was renewed in 2025 - at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment. This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination. The stated price is based on the Incoterm EXW, including disassembly by the buyer. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 540 8x2 with F990RA.2.28 L616 V30 - New model - Electro-hydraulically steered tag axle, single-tire configuration - FH Sleeper cab - Wheelbase 5600 mm - Exhaust emissions compliant with Euro 6 Stage E, - with SCR, particulate filter, and exhaust gas recirculation - Diesel engine 12.8 l, 540 hp, 2850 Nm - Volvo Engine Brake+ (VEB+) engine brake. - Braking power 540 hp (D13K) - Complies with ADR braking regulations - I-Shift AT2612F, automated 12-speed transmission (direct gear), max. input torque: 2,652 Nm - Liftable axle - Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t - AA tires 315/70R22.5 - Drive axle ratio 2.85 : 1 - Driver comfort package - Air conditioning with automatic temperature control and sun sensor - Info and media package with navigation - Radio reception: AM/FM - USB port, 3-way - 8 speakers - High instrument cluster: digital driver information display, 12 displays with 4 views - Second driver information display, 9-inch touchscreen color display - TOMTOM navigation system - AGM batteries, 2 x 210 Ah - Battery indicator on the display (Volts, Amps, and battery status with warning function) - Main switch on the chassis - 330 L aluminum tank on the right, D-shape, 710 mm high, 830 mm long - Fuel tank, normal ground clearance - AdBlue tank on the left, usable capacity 64 liters - Lockable fuel tank cap - Fuel tank filler neck, anti-splash protection - Exhaust outlet to the rear - 2 foldable chock blocks, transport mounting - Rear and side marker lights - Trailer coupling with D-value = 190 kN for G-150/G-260 hole pattern - Trailer coupling to frame end 85 mm - Rear frame length 4395 mm, measured from drive axle/1st drive axle - Rockinger 400 G-150 trailer coupling (Note D-value/max. trailer load!) - Electrical connection for semi-trailer/trailer, 15-pin - Trailer/semi-trailer connection Duomatic - Trailer connections in the center - Stationary trailer brake (active up to 7 km/h) - Underrun protection rear, aluminum, fixed, thin - 4x front axle tires 385/55R22.5 Continental, Hybrid HS3+, Rolling resistance class: C, steering axle - 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle - 2x tag axle tires 385/55R22.5 Continental, Hybrid HS3+, Rolling resistance class: C, tag axle - Venting pump, electric - Transmission/I-Shift operation via control unit on the driver's seat - I-Shift driving modes: Standard, Performance, and Economy - Autoreturn in Economy mode - No manual intervention in automatic mode, without kickdown - Cruise control - Transmission oil cooler, basic, water/oil - Air compressor 2-cylinder, 1100 l/min, for vehicles/combinations with increased air demand - Air intake at the front with a normal air filter - Alternator 150A/4200W Ndedoywfxyepfx Abysc - Exterior noise according to ECE R51.03 Phase 2, with low-noise certificate and L-label - Closed crankcase ventilation - Double fuel filter on the engine, large for poor fuel quality, e.g. in Eastern Europe - Fuel filter with water separator - Auxiliary drive (medium-fast PTR-DM), gearbox side, connection: 1 DIN rear for pump - Auxiliary drive on the gearbox, max. power 600 Nm - Dynamic equipment: seats in fabric, side vinyl (blue/dark blue) with interior in gray fabric - Driver's seat comfort, air-suspended, heated, seatbelt in the seat - Passenger seat standard, air-suspended - Lower bunk, foldable, 2000x815/740/660 mm (middle, top, bottom) with safety net - Cab heater, 2 kW - Storage space under the bunk - Cool box with f

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 540 8x2 with F990RA.2.28 L616 V30 - New model - Electro-hydraulically steered trailing axle, single-tired - FH Sleeper cab - Wheelbase 5600 mm - Exhaust emissions acc. to Euro 6 Stage E, - with SCR, particulate filter and exhaust gas recirculation - Diesel engine 12.8 l, 540 hp, 2,850 Nm - Engine brake Volvo Engine Brake+ (VEB+). - Braking power 540 hp (D13K) - Complies with ADR braking regulations - I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm - Liftable axle - Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t - AA tires 315/70R22.5 - Drive axle ratio 2.85 : 1 - Diesel fuel - Driver comfort package - Air conditioning with automatic temperature control and sun sensor - Info and media package with navigation - Radio reception: AM/FM - USB connection, 3-way - 8 speakers - Instruments High: digital driver information display, 12 with 4 views - Second driver information display, 9-inch touchscreen color display Njdpfx Aezl Irpjbyedc - Navigation system TOMTOM - AGM batteries, 2 x 210 Ah - Battery indicator in the display (Volts, Amperes and battery status with warning function) - Main switch on the chassis - 330 L aluminum tank on the right, D-shape, 710 mm high, 830 mm long - Fuel tank, normal ground clearance - AdBlue tank on the left, usable content 64 liters - Tank cap lockable - Tank filler neck, splash guard - Exhaust pipe pointing backwards - 2 foldable wheel chocks, transport mounting - Marker lights at the rear and on the sides - Trailer beam with D-value = 190 kN for G-150/G-260 hole pattern - Trailer beam to frame end 85 mm - Rear frame length 4395 mm, measured from drive axle/1st drive axle - Trailer coupling Rockinger 400 G-150 (Pay attention to D-value/max. trailer load!) - Electr. connection for semi-trailer/trailer, 15-pole - Trailer/semi-trailer connection Duomatic - Trailer connections in the middle - Stationary trailer brake (active up to 7 km/h) - Underrun protection rear, aluminum, fixed, thin - 4x front axle tires 385/55R22.5 Continental, Hybrid HS3+, Rolling resistance class: C, steering axle - 4x AA tires 315/70R22.5 Continental, Hybrid HD3, Rolling resistance class: C, drive axle - 2x trailing axle tires 385/55R22.5 Continental, Hybrid HS3+, Rolling resistance class: C, trailing axle - Venting pump electric - Transmission/I-Shift operation via control unit on the driver's seat - I-Shift driving mode: Standard, Performance and Economy - Autoreturn in Economy mode - No manual intervention in automatic mode, without kickdown - Cruise control - Transmission oil cooler, basic, water/oil - Air compressor 2-cylinder, 1100 l/min., for vehicles/combinations with increased air demand - Air intake at the front with normal air filter - Alternator 150A/4200W - External noise according to ECE R51.03 Phase 2, with low-noise certificate and L-label - Closed crankcase ventilation - Double fuel filter on the engine, large for poor fuel quality, e.g. in Eastern Europe - Fuel filter with water separator - Auxiliary drive (medium-fast PTR-DM), gearbox-side, connection: 1 DIN at the rear for pump - Auxiliary drive on the gearbox, power max. 600 Nm - Dynamic equipment: seats in fabric, side vinyl (blue/dark blue) with interior in grey fabric - Driver seat Comfort, air-suspended, heated, seatbelt in seat - Passenger seat Standard, air-suspended - Lower bunk, foldable, 2000x815/740/660 mm (middle, top, bottom) with safety net - Stand-alone heater cab, 2 kW - Storage space under the bunk - Cool box

Condition: new, functionality: fully functional, power: 10.3 kW (14.00 HP), color: red, lifting power: 600 kg/m, shovel volume: 0.13 m³, The design of the simplified control panel is user-friendly, making operation easier and more comfortable. Comfortable seating, intuitive operation Ergonomically designed seats enable long working periods without fatigue. The recommended operator layout streamlines the workflow and increases efficiency. Machine body made from high-quality material The frame of the mini loader is manufactured from high-grade steel, enhancing stability and wear resistance, which ultimately improves the machine’s durability. Ndodpfx Asw Ufqisbyec More powerful machine core A brand-name engine and premium internal components ensure reliable performance of the mini loader. PERFORMANCE: Model: H130 PRO Payload: 238 kg Bucket volume: 0.13 m³ Maximum lifting force: 600 kg Travel speed: 0–4.2 km/h Hydraulic pressure: 18.5 MPa Lifting time: 4.7 s Lowering time: 3.2 s Dumping time: 4.6 s Gradeability: 30% Operating weight: 780 kg ENGINE: Brand: KOOP Model: 192F Type: 1-cylinder, diesel Power: 14 hp / 3600 rpm Fuel consumption: ≤ 2.3 l/h Starting: electric Tank capacities Fuel tank: 5.5 l Engine oil: 1.65 l Hydraulic oil: 23 l DIMENSIONS: Length with bucket: 2373 mm Width with bucket: 1050 mm Width without bucket: 1010 mm Height with ROPS: 1867 mm Height without ROPS: 1291 mm Track width: 800 mm Ground clearance: 180 mm WORK RANGE: Maximum working height: 2572 mm Height to bucket pivot pin: 1953 mm Maximum dump height: 1484 mm Dump reach: 561 mm Dump angle at max height: 29° Rollback angle on ground: 24° PRICE: €6,900 net €8,211 gross KINGWAY DEUTSCHLAND is the sole permanent distributor of the Kingway brand in Germany. Only here can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. Our extensive inventory ensures around 100 machines are available at any time. We deliver throughout Germany, Austria, Switzerland, Italy, and neighboring countries. We also provide our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, mileage: 100 km, power: 390 kW (530.25 HP), fuel type: diesel, overall weight: 44,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, Available Immediately!!! Vehicle located at Triftstr. 29, 38723 Seesen Specially designed recovery arm with lifting yoke for lifting, towing damaged vehicles, trucks, tractor units, buses, trailers, etc. Complete hydraulic system. 3rd coat of paint HDRV (STANDARD) STORAGE BOXES (inside): yellow RAL 1032 STORAGE BOXES (outside): yellow RAL 1032 LIFTING YOKE: black, powder-coated RAL 9005 RECOVERY ARM: black, powder-coated RAL 9005 REAR SUPPORT LEGS: black, powder-coated RAL 9005 COUNTERWEIGHT (front, under cab, if applicable): black, powder-coated RAL 9005, smooth on the front side. 4. Intermediate frame (STANDARD) - hot-dip galvanized - for mounting the counterweight in the front - rear part painted in body color. 5. Recovery arm (STANDARD) - lifting angle 40° (Fig. HDRV 1013) - mounting plates for main and auxiliary winch - shackles 2x15000kg - left and right side in the rear part of the arm - space for spare wheel holder on the recovery arm. 6. Lifting Yoke (STANDARD) - Area position with respect to the horizontal axis -5° / +10° - Load capacity in retracted state 20000kg - Load capacity in extended state 10000 kg - Extension 3800 mm - Reach to vehicle axle. 7. Hydraulic support legs at the rear (STANDARD) - independently controlled - maximum width -3000mm - rotatable support legs for working on asphalt and on the ground. 8. Hydraulically extendable beam No HDRV 1013 Individual extension 0 - 3000mm maximum payload 2000 - 9000kg 9. Relocation of the tank behind the cab Nsdpfx Aboz Sithoyodc - Relocation of the air tank behind the cab - Relocation of the battery behind the cab - Relocation of the AdBlue tank - Counterweight behind the cab on the frame in the front (weight 100kg) - Main winch COME UP Bison 50, mounted on the recovery arm, pulling force 22.6T - Auxiliary winch COME UP Bison 50, mounted on the recovery arm, pulling force 22.6T. 16. Hydraulic system (STANDARD) - Dual hydraulic pump (STANDARD) - hydraulic control block on the right side (STANDARD) - on right side, in rear storage box. 19. Connections for supplying the braking systems, transferred from the chassis - quick coupling with cable 20 meters - air pressure roller, on the left side of the superstructure, mounted over the rear axles. 21. Electric connector for trailer + trailer hitch, transferred from the chassis - Jump start 12V/24V, cable, lever, mounted on the right side - Jump start 12V/24V, cable, lever, mounted on the left side - Camera + LCD screen in the cab - Camera over winch + LCD screen in the control box SCREEN: - Vibration resistance: 10G - Impact resistance: 100G - Operating temperature: -30 to + 70 ° C - CE marking - EMC approval: E26. Control of EMERGENCY STOP switch - Wireless remote control - 1 function - Made of aluminum - Holder for tools and accessories - Floor with rubber mats - small ladder - Auxiliary ladder in storage boxes. 29. Storage box opening - doors - Railing on storage boxes - stainless steel - Aluminum platform, perforated, mounted on the upper part of the storage boxes - Stainless steel holder in large storage box, behind the cab, for fork, hook, open box. 33. All edges of the storage boxes are finished with stainless steel profiles - Bunk bed mounted in storage box 35. Lighting package complies with road traffic regulations - LED lighting in storage boxes - LED lighting, outside - LED warning light bar GAMET DE LUX, 1800mm - Mounting of the warning light bar on the upper part of the superstructure - Warning light ORANGE BLTZ, 2 pieces - front mou

Condition: used, mast type: telescopic, fuel type: diesel, General information Year of manufacture: 2010 Weights Empty weight: 16.892 kg Functional Lifting capacity: 230 kg Working height: 2.810 cm Dimensions of cargo space: 1230 x 249 x 304 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Ndsdpfey A Nfnex Abyjc Max. horizontal reach: 2340 m Max swing of arm in degrees: 70 Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 860SJ Year of build: 2010 Condition: Used Data: Max. working height: 28,10 m Platform height: 26,10 m Max. reach: 23,40 m Platform lifting capacity: 230kg Platform dimensions LxW: 2,44 x 0,91 m Swivel range: endless Gradeability: 45% Transport dimensions LxWxH: 12,30x 2,49 x 3,04 m Movable up to working height: 28,10 m Wheel pressure max.: 82kN Ground clearance: 0,30 m Drive type: Diesel Empty weight: 16.892 kg Special features: All-wheel drive swing axle

Condition: good (used), loading space length: 7,430 mm, loading space width: 1,850 mm, loading space height: 2,100 mm, General information Year of manufacture: 2016 Field of application: Construction Drivetrain Type of fuel: Electric Weights Empty weight: 1.840 kg Functional Lifting capacity: 215 kg Lift height: 1.610 cm Working height: 1.810 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1110 m Max swing of platform in degrees: 360 Production country: FI Additional information Please contact Christian Theißen for more information Manufacturer: Dino Lift Model: 180T-1 Year of build: 2016 Condition: Used Data: Max. working height: 18,05 m Platform height: 16,05 m Max. reach: 11,10 m Platform lifting capacity: 215 kg Platform dimensions LxW: 1,40 x 0,80 m Swivel range: 360° / endlos Total dimensions LxWxH: 7,43 x 1,85 x 2,10 m Transport dimensions LxWxH: 7,43 x 1,85 x 2,10 m Support width both sides: 4,29 m Ndjdpfx Aoyx Sgaebysc Support length: 3,88 m Ground pressure: 13 kN Ground clearance: 0,20 m Drive type: Battery 230 V Empty weight: 1.840 kg Special features: Support load 75 kg, swivel work basket, socket in the work basket, maneuvering drive.