Used Cabinets for sale (3,430)

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: Kfjdpfxox Eabpo Aa Eoa • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) For further questions, feel free to contact us by phone.

Condition: good (used), functionality: fully functional, total length: 4,570 mm, total width: 3,820 mm, total height: 2,300 mm, number of shelf rows: 13, product height (max.): 70 mm, Specifications: Overall dimensions (HxWxD): 457 × 382 × 230 cm Cabinet front dimensions (HxW): 328 × 210 cm Number of drawers: 13 Drawer dimensions: 328 × 210 × 7 cm (HxW×drawer height) -Robust steel construction, suitable for intensive industrial use This cabinet offers extensive storage capacity and, with its spacious drawers, is ideally suited for workshops, production environments, or warehouses where organization and accessibility are important. -Due to its large dimensions and solid construction, transport requires extra planning and appropriate equipment (e.g., forklift/load handling equipment). Kfjdex Izkyepfx Aa Eea

Condition: used, Year of construction: 2014, functionality: fully functional, Machine name: Hydraulic Tire Vulcanizing Press with Two Stations 2. General Information Manufacturer: HF TireTech Group (Harburg-Freudenberger Maschinenbau GmbH) Kjdox I D A Sopfx Aa Eofa Model / Type: KHP 46-150 Year of manufacture: 2014 Order number: 7282500526 Station Labels Left station (factory number): 4L Right station (factory number): 4R Control Interface System: Rockwell Automation / Allen-Bradley PanelView Plus 700 Controls: Integrated physical push-button panel 3. Technical Data / Specifications - Configuration: Vertical hydraulic curing press with two chambers Pressure Specifications Maximum pressure: Not clearly legible on the attached nameplate; corresponds to the design parameters of the KHP 46-150 series (typically approx. 250 bar, based on model specifications). Electrical cabinet - Label: Cabinet B01 Inventory tags: “024398” / “100” Hydraulic System - Unit Manufacturer: Parker Tank / Components: Branded hydraulic reservoir and system components Pump / Motor: Vertically mounted electric motor on a white/beige hydraulic tank Loading Mechanism - System: Automatic loading system for green tires - Mold handling: Segmented mold handlers Pneumatic Control System Control panel: Dedicated pneumatic control panel (Pneumatic PC) Equipment: Pressure regulators and solenoid valves

Condition: excellent (used), Euromac hydraulic punching machine Inventory no. 3723 * Manufacturer: Euromac * Model: XP 950/30 CNC * Capacity: 30 t * Throat depth: 950 mm Kodpfx Aaex Iwrys Eofa * Strokes: 180 strokes/min * Table size approx. 4000 x 1300 mm * Cabinet with accessories

Condition: ready for operation (used), Year of construction: 2011, table length 3050 mm table width 1525 mm burner heads 1 Control Mazatrol Preview M Number of working hours 31400 h laser capacity in Watt 4000 max. table load 915 kg max. size of workpiece LxWxH 3050 x 1545 x 25 mm sheet thickness - max. 25 mm height of material-table 375 mm table height over floor 900 mm rapid traverse x / y / z axis 24 / 24 / 25 m/min weight of the machine ca. 14,2 t dimensions of the machine ca. 8 x 2,9 x 2,6 m Well-maintained laser cutting system (CO2 gas laser) with travel distances x/y/ z = 3260 x 1545 x 430 mm, maximum working area: 1525 x 3050 mm, 3rd turning Kfsdpfx Asx H Tuuja Eea axis NC rotary table for mounting tubes (therefore Z-axis 430 mm), gantry loader with vacuum lifter for feeding new sheets and lifting unit for removing finished sheets, as well as control cabinet with operating elements, tapping unit with drill magazine, automatically retracting protective hood, Donaldson extraction system, cooling system, further technical data available upon request. The gantry loader uses a vacuum lifter to pick up the new sheets, automaticallypicks up the laser-cut sheet during transport, sets the new sheet down, and then moves it to the delivery table for the finished sheet, where it is placed – see video 2. The extraction system, cooling system, and transformer are mounted on the platform above the machine. Mazatrol Preview M control unit with color TFT, 64-bit CPU, 20 GB hard drive, EIA/ISO format programming.

Condition: ready for operation (used), Beckhoff C6930-0050 control cabinet industrial PC SN:3351156-002, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Kfsdpfsx Eqvyjx Aa Eea

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Kfsdpfx Aaox D Abpj Esa Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) For further questions, feel free to contact us by phone.

Condition: new, Year of construction: 2025, functionality: fully functional, NEWAY NL502 2 AXIS CNC LATHE WITH FANUC 0IT PLUS 3B YEAR OF MANUFACTURE - 2025 STANDARD INCLUDED FACTORY FITTED MACHINE OPTIONS  STD AIR - AIR GUN  STD CHIP - CONVEYOR SIDE HINGED WITH CHIP BOX  STD CHU - 10 INCH 3 JAW HOLLOW HYD CHUCK INC SET SOFT JAWS  STD CHU - STANDARD HYD CHUCKING CYLINDER - HOLLOW  STD CNC.OP - FANUC 0ITF 3B PLUS WITH 10.4 INCH COLOUR LCD DISPLAY & 8MB MEMORY  STD CNC.OP - MANUAL PULSE GENERATOR (MPG)  STD CS - COOLANT GUN  STD GUA - FRONT DOOR INTERLOCK  STD GUA - FULLY ENCLOSED SPLASH GUARDING SYSTEM  STD GUA - TELESCOPIC SLIDEWAY COVERS  STD HYD - STANDARD HYDRAULIC UNIT  STD LI - LED WORKING AREA LIGHTING SYSTEM  STD LI - PATROL LIGHT (3 COLOUR)  STD MISC - AIR CONDITIONING IN ELECTRICAL CABINET  STD MISC - BASIC MACHINE INSTALLATION PARTS  STD MISC - CE STANDARDS MACHINE CONFIGURATION  STD MISC - CENTRALIZED AUTOMATIC LUBRICATION SYSTEM  STD MISC - MACHINE MANUALS & OPERATOR HANDBOOKS  STD MISC - STANDARD ACCESSORIES  STD POW - TRANSFORMER (415V, 3PH, 50HZ)  STD SPGB TC - BELT DRIVE SPINDLE - 3,500 RPM - A2-6  STD SPGB TC - SPINDLE MOTOR FANUC 15.0 / 18.5 KW  STD TS - HYDRAULIC TAILSTOCK  STD TUR - 12 STATION SERVO TURRET MACHINE CONSTRUCTION & FEATURES  SOLID CAST IRON 45 DEGREE SLANT BED CONSTRUCTION  HARDENED & GROUND BOX GUIDEWAYS  12 STATION SERVO TURRET  10 INCH STANDARD CHUCK SIZE - 12 INCH & BAR CAPACITY UPGRADE OPTIONS  15.0 / 18.5 KW MAIN SPINDLE  HYDRAULIC TAILSTOCK MACHINE SPECIFICATION CAPACITY Max. Swing Diameter Over Bed Ø 600 MM Max. Swing Diameter Over Saddle Ø 480 MM Max. Turning Diameter Ø 500 MM Max. Turning Length 570 MM Max. Bar Capacity Ø 74 MM X / Z AXIS TRAVEL X-Axis Travel 280 MM Z-Axis Travel 600 MM X / Z AXIS SERVO MOTOR TORQUE Kodjxt Nrmopfx Aa Eofa X-Axis Torque 10.5 NM Z-Axis Torque 10.5 NM SPINDLE HEADSTOCK STD Spindle Nose A2-8 Spindle Bore 86 MM Spindle Speeds 30 ~ 3,500RPM Chuck Size Ø 10” - 245 MM Spindle Power 15.0 / 18.5 KW FEEDRATES X-Axis Rapid Traverse Rate 16 M / MIN Z-Axis Rapid Traverse Rate 20 M / MIN Cutting Feed Rate 1 ~ 8,000 MM / MIN TURRET Number of Turret Stations 12 Turret Indexing Time 0.2 SEC / POS Tool Size - Turning 25 x 25 MM Tool Size - Boring Ø 40 MM TAILSTOCK Tailstock Quill Diameter Ø 100 MM Tailstock Quill Travel 100 MM Tailstock Quill Taper MT5 LIVE CENTER ACCURACY Positioning Accuracy (X / Z) 0.010 / 0.010 MM Repeatability (X / Z) 0.005 / 0.007 MM MISCELLANEOUS Power Requirement 35 KVA Power Supply 415V / 3PH / 50HZ Cutting Coolant Volume 240 L Machine Dimensions (L / W / H) 4,290 / 1,880 / 1,750 Machine Gross Weight 4,000 KGS

Condition: used, Year of construction: 2008, functionality: fully functional, Machine Name: Hydraulic Tire Vulcanizing Press with Two Stations 2. General Information Manufacturer: Harburg-Freudenberger Maschinenbau GmbH (Rubber Technology Division) Model / Type: KHP 52-180 Year of Manufacture: 2008 Order Number: 70 825 00 225 Station Identification Left Station (Serial Number): 4L Right Station (Serial Number): 4R Control Interface System: Rockwell Automation / Allen-Bradley PanelView Plus 700 Kjdpsx I Dyqjfx Aa Eofa Control Elements: Integrated physical pushbutton panel 3. Technical Data / Specifications - Configuration: Vertical hydraulic curing press with two chambers Pressure Values Maximum Pressure: 240.2 bar Test Pressure: 343.8 bar Test Date: January 2008 Electrical Cabinet - Designation: Cabinet D11 Inventory Labels: "4019311" / "99" Hydraulic System - Unit Configuration: Rear-mounted green hydraulic tank and manifold system - Components: Rexroth hydraulic valves and gauges (visibly installed) Loading Mechanism - System: Automatic loading system for green tires - Mold Handling: Segmented mold handler Auxiliary Control System - Control Panel: Secondary pneumatic/hydraulic valve control panel - Manufacturer: Rockwell Automation - Installation Location: Mounted at belt conveyor infeed

Condition: used, Year of construction: 2000, 1 pc. ALTENDORF F45 CE panel saw Max. saw blade diameter 450 mm, includes various saw blades and cabinet, angle guide, fence, voltage 400V, current 13.5A, power 5.5kW, as per images and inspection, self-dismantling required Ksdpfxsx Ifaxj Aa Eefa Color: green Year of manufacture: 2000 Condition: used Payment method: advance payment by bank transfer Storage location: Carpentry workshop / Hall 1 Shipping: Collection only – no shipping offered for this item!

Condition: used, mileage: 11,000 km, power: 120 kW (163.15 HP), first registration: 10/2022, fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2022, Equipment: air conditioning, central locking, Renault Master for sale, body: NadwoziaTIM This food truck comes with a very comprehensive equipment package: - Large refrigerator - Separate freezer - Refrigerated counter - 3 sinks - Plenty of cabinets Kfjdex Df Tujpfx Aa Eea - Sufficient power outlets - Pizza oven - 2 deep fryers - 1 gas grill - Large wall-mounted extractor hood with light This sales vehicle is fully equipped and immediately ready for use! Video on TikTok: penderstrucksvans New TÜV upon delivery! Financing possible via Santander Consumer Bank.

Year of construction: 2008, condition: used, // Equipment dismantled and stored in our warehouse // Manufacturer: Larox / Pannevis (Larox B.V.) Model: RT®/FT 1.15 x 5.6 m Type: Vacuum belt filter Year: 2008 (1988 version refurbished) Application: Liquid/solid separation, with cake drying and filtrate recovery. FT = Fume-Tight> Materials: stainless steel Filter area: 6.4 m² Cake cleaning: – Option to perform several washing stages, with each filtrate collected in its own receiver (purity up to 99.99% or more) with low washing water consumption. – Backwashing Repositioning of the tray and support grids at each retraction Operation/power supply: continuous Continuously washed filter cloth Cloth orientation and tensioner Kedpfex Akbzjx Aa Ejfa Extraction screw Skid with 3 filtration tanks and circulation pumps Vacuum pump skid: – Sihi Sterling LPHA 70123 (Atex) – Liquid ring: ethanol – 855 m³/h – 21.83 KW – Heat exchanger – Recirculation pump – Separator tank Main machine weight: 3000 kg Main machine length: 913 cm Full technical documentation (paper and digital versions) Electrical cabinet

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 28900 kg Main Drive Number of axis 6 This 6-axis Universal Robots ur10 cb3.1 was manufactured in 2018, featuring a payload capacity of 10 kg and a reach of 1300 mm. It includes a control cabinet with dimensions 475x423x268 mm, supports TCP/IP communication, and operates with a power consumption of approximately 350 W. Ideal for tasks requiring precision and flexibility. Contact us for more information about this machine. Application Types Robotics Kfodpfsx I S Sbjx Aa Eea

Condition: used, Year of construction: 2012, functionality: fully functional, Machine Name: Hydraulic Tire Vulcanizing Press with Two Stations General Information Manufacturer: Harburg-Freudenberger Maschinenbau GmbH (Rubber Technology Division) Model / Type: KHP 46-150 Year of Manufacture: 2012 Order Number: 70 825 00 382 Station Identification: Left Station Number: 6L Right Station Number: 6R Asset Number: “D03” Control Interface: Allen-Bradley PanelView Plus 700 with integrated keypad module Technical Data / Specifications Configuration: Vertical dual-chamber curing press Pressure Values: Maximum Pressure: 250 bar Test Pressure: 360 bar Control Cabinet: Label: Control Cabinet D03 Inventory Tag: “4023489” / “91” Hydraulic System: Unit Manufacturer: Parker / Harburg-Freudenberger Tank Manufacturer: HF-Belisce (Test Date: 06.2012) Motor: Electric motor, vertically mounted on tank Loading Mechanism: Automatic loader arms for green tires with extendable clamping chucks Kfsdpfx Aox Iu Aiea Eea

Condition: used, Manufacturer: Contifrac sprl Model: CDS-161205 Year: 2017 Type: Deodorizer Kfsdpex Akadsfx Aa Eoa Condition: new, never used. Document : CDS-P& Installation consisting of: - A horizontal cylindrical deodorizer with a shallow bed divided into two horizontal compartments, supported by two supports and offering the possibility of treating either 250 kg in one compartment or 500 kg in two compartments. - A horizontal buffer tank equipped with a product inlet/outlet, a vacuum outlet, and a sight glass. Volume: +/- 460 liters. - 2 tubular heat exchangers - 1 electric heater - 2 electric heating elements - Other equipment: control and metering valves, flow meter, steam drying ramp, etc. - Electrical cabinet Materials: all parts in contact with the product are made of 304L and 316L stainless steel. Insulation: 100 mm rock wool. Documentation and diagram available. Capacity: deodorization temperature 180°C (200°C max.) Batch: 250 kg or 500 kg (2 x 250) Process: heating the product under vacuum + steam injection.

Condition: used, Year of construction: 2021, functionality: fully functional, Manufacturer: HF TireTech Group (Harburg-Freudenberger Maschinenbau GmbH) Model / Type: MCP 52-180IC Year of manufacture: 2021 Order number: 7782500896 Station Identification: Left station number: 3L Right station number: 3R Asset number: "C10" Control interface: Allen-Bradley PanelView Plus (touchscreen with physical control arrangement) Technical Data / Specifications Configuration: Vertical press system with two cavities Hydraulic unit: Manufacturer: Parker Components: Integrated blue hydraulic tank with level indicator and motor/pump assembly Control cabinet: Designation: Control cabinet C10 Kfedpfxox Iuufj Aa Eja Branding: HF TireTech Group

Condition: used, power: 4 kW (5.44 HP), color: grey, Year of construction: 2002, Field of application: Mining Volume of the tank: 0.22 m^3 Kodpfsx Ai Uaox Aa Eofa Manufacturer : Comec Model: Micronet-25-COSM Year : 2002 Type : DISPERSION & MILLING MACHINE   Useful volume : 3 - 22 L Motor power : 4 kW Material : stainless steel Electrical cabinet with variable speed drive. Work cycle timer for automatic stop. Double jacket Top loading of liquids Dispersion by deflocculating turbine + sand milling Continuous recirculation between the upper dispersion basket and the lower grinding chamber until the desired fineness is achieved. Cosmetic applications: Particularly suitable for the stable dispersion of oils in water, the addition of pigments and glues, and the mixing of colourants in products such as nail varnishes.

Condition: used, Year of construction: 2011, functionality: fully functional, PC/LT Tire Endurance Testing Machine 1. Manufacturer Kedpex Iunlsfx Aa Eofa • Manufacturer: Tianjin Jiurong Wheel Tech Co., Ltd. • Country of origin: People's Republic of China 2. Machine Identification • Model: TJR-2-PC/LT (JC) • Machine type: PC/LT Tire Endurance Testing Machine • Internal identification: “Tianjin 8” • Serial number: B1060 • Year of manufacture: August 2011 3. Intended Purpose • Durability and endurance testing of passenger car (PC) and light truck (LT) tires • Designed for high-speed and load-controlled tire testing 4. Test Drum and Capacity • Test drum diameter: 2,000 mm • Test drum width: 500 mm • Tire diameter range: 500 – 1,000 mm • Rim diameter range: 12" – 24" 5. Mechanical and Performance Data • Maximum speed (V/MAX): 350 km/h • Maximum test load: 25 kN (approx. 2,500 kg) • Camber angle adjustment range: –6° to +6° 6. Drive System • High-power AC electric motor • Power transmission via multi-belt drive system 7. Electrical and Performance Data • Rated power: 120 kW • Electrical connection: 400 V / 50 Hz • Rated current: 220 A 8. Control and Automation • Control unit (HMI): Allen-Bradley PanelView 550 9. Electrical Equipment • Stand-alone control cabinet • Control cabinet manufacturer: Rittal • Integrated active cooling unit 10. Physical Data • Machine weight: 15,000 kg • Overall dimensions (L × W × H): – 7,064 × 2,795 × 2,050 mm

Condition: used, Power: 9 kW (12 HP) Volume: 550 l Manufacturer: WAM Model: WBH550 Type: Ploughshare mixer Ksdpfx Asx Ai Tvea Eefa Total volume: 550L Capacity: 155 - 385 L Material: stainless steel Main motor power: 9.2 kW ATEX tulip-shaped chopper: 3 kW Bearing seal: air purge Filter support Bag emptying hopper Drain valve: pneumatic Secondary drain valve: manual Electrical cabinet with speed variation Dismantled platform available with equipment including: mixer support, platform, and stairs.

Condition: used, Year of construction: 2005, functionality: fully functional, 1. Manufacturer • Manufacturer: inmess Gesellschaft für Industrie- und Messtechnik mbH 2. Machine Identification • Model: RRT (Rolling Resistance Tester) • Machine number: 05-U-RRT-08 • Year of manufacture: 2005 3. Physical Data • Machine weight: 6,200 kg • Version: Heavy-duty industrial design • Finish: Yellow/Green 4. Test and Performance Parameters • Test wheel diameter: 67 inches (approx. 1.70 m) • Maximum test speed (V_max): 320 km/h • Maximum test load: 2,500 kg • Camber angle adjustment range: 0° – 5° 5. Drive System • High-performance electric motor • Multi-belt transmission system 6. Control and Instrumentation • Control unit (HMI): Allen-Bradley PanelView 550 Ksdpfx Asx Iuhxsa Eofa • Instrumentation: – Digital display units JUMO di 308 – For pressure and load monitoring 7. Electrical Equipment • Standalone control cabinet • Integrated active cooling unit

Year of construction: 2016, condition: used, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Kjdpfx Ajx Ai Tisa Ejfa Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVDPump support benchATEX: Ex-d-IIB-T4 – IP55Power: 11 kWAtmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Year of construction: 1971, functionality: fully functional, 4-Roll Rubber Calender 1. Manufacturer • Manufacturer: Comerio Ercole 2. Machine Identification • Machine type: 4-Roll Rubber Calender • Roll dimensions: 18" × 54" – Roll diameter: 18 inches – Roll length: 54 inches 3. Year of Manufacture and Modernization • Original year of manufacture: 1971 • Modernization history: Machine regularly upgraded until 2018 4. Intended Use • Calendering of rubber compounds • Designed for continuous operation in tire and rubber production lines 5. Control and Automation • Upgraded control system implemented in 2012 • MMI system installed in 2001 • Control panel equipped with Beckhoff components 6. Mechanical and Process Upgrades Mechanical Upgrades • Installation of new calendar rolls (2018) • Optimization of the spool winding unit (2014) • Overhaul of cooling lines (2013) Process Upgrades • Gauge measurement system installed (2012) • SQ1 material width measuring system installed (2009) • Cassette winding systems with dedicated control cabinets installed (2009) Ksdpfsx Iug Uex Aa Ejfa 7. Drive System • Large industrial electric motor by ABB • Drive system coupled with Comerio Ercole gearbox 8. Plant Configuration • Integrated adjustment for feed extruder (installed 2012) • Cooling section included in the system • Multiple winding stations integrated into the calender line

Year of construction: 1997, condition: used, Power: 11 kW (15 HP) Manufacturer : Aeromatic TK Fielder (GEA) Model: Pharma Matrix 150 Year : 1997   Type : Granulator / high speed mixer Application : Granulation Sector : Pharmaceutical / Chemical / Cosmetics   Material : stainless steel Tank volume : 150 L Jacket : 2 bars / 80°C max Main agitation : 130 - 260 rpm Power : 11 KW Variable speed drive: electric Chopper / granulation: 1500 / 3000 rpm CIP self-cleaning: seals and tank GMP: Good manufacturing practice : safety / contamination Kodsx Aizgjpfx Aa Eefa CASTELL safety key Discharge valve: pneumatic Bag filter Primary sealing: inflatable seal Secondary seal: compressed air purge Compressed air: 6 bars Electrical cabinet Video available in operation Digital documentation

Condition: used, Year of construction: 2005, functionality: fully functional, 1. Manufacturer • Manufacturer: Karl Eugen Fischer GmbH Kfsdpfxox Iuf Ro Aa Eea 2. Machine Identification • Machine type: Adhesive Strip Applicator with Layer Gauge • Model: HTBC • Year of manufacture: 2005–2015 (serial production range) 3. Intended Use • Cutting and application of rubber strips and/or ply materials • Designed for use in tire manufacturing and rubber processing 4. Mechanical Construction • Heavy-duty steel frame construction • Industrial green paint finish • Elevated operator platform with integrated access stairs 5. Conveyor and Material Handling • Wide flat-belt conveyor system for continuous transport of rubber sheets • Conveyor system integrated into the cutting and application process 6. Unwinding and Rewinding System • Overhead and lower roller stations • Designed for handling liner and ply materials • Configured for controlled unwinding and rewinding operations 7. Electrical Equipment • Power supply: 400 V / 50 Hz • Control cabinets: – Large, free-standing grey control cabinet bank – Integrated climate control system 8. Safety Equipment • Yellow safety fencing • Mechanical safeguarding of hazardous areas

Condition: used, Year of construction: 2007, functionality: fully functional, 1. Electrical and Performance Data • Rated power: 22 kW • Power supply: 400 V / 50 Hz • Rated current: 35 A 2. Pneumatic System • Operating pressure range: 4 – 10 bar 3. Control and Operating System • Control unit (HMI): Allen-Bradley PanelView 550 • X-ray control: Gulmay MP1 data protocol controller 4. X-ray Generation System • High voltage generator: Gulmay FC160-1/2 • Configuration: Mobile unit • Country of manufacture: England 5. Enclosure and Safety Equipment • Fully enclosed, radiation-shielded cabins • Cabin color: white/blue • Integrated safety interlock system Kfsdpjx It Uqefx Aa Eoa 6. Material Handling System • Integrated motorized roller conveyor • Conveyor belt configured for both infeed and outfeed of material 7. Electrical Installation • External control cabinet system • Multi-door cabinet array • Control cabinet manufacturer: Rittal