Used Brake Drum for sale (17,699)

Condition: used, continuous blanching / pasteurizing / cooking vessel or cooling plant shaftless spiral : perforated drum with welded screw (helix configuration) by which the products are gently transported through the water complete insulated closed system : energy saving by the insulation of the entire machine and the indirect steam heating net length ± 11 m width 3.100 mm all stainless steel adjustable speed variable dwell adjustment suitable for steam heated • connection 400 kg / h (5 bar) heat exchanger circulation pump with outfeed conveyor belt for unloading with elevating spiral screw for loading in good condition Applications : • Blanching of vegetables and potato products • Pasteurising and/or after-pasteurising of vacuum-packed products • Cooking of sausages in natural or artificial casings Ljdpey Nx H Ijfx Amnorl • Cooking of heads and tongues • Cooking of poultry • Continuous soup production

Condition: used, can be used as crumber or pre-duster (only dry coatings) ideal for irregular shapes all stainless steel adjustable speed mobile outfeed conveyor Lrodpfey Nx Hujx Amnel belt width 400 mm outside dimensions (l x w x h) : ± 3.000 x 1.600 x 1.900 mm

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2015, loading space length: 8,170 mm, loading space width: 2,440 mm, total length: 9,310 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 7,060 mm, Year of construction: 2015, Equipment: ABS, = Additional Options and Accessories = - ADR - BPW axles - EBS - Air suspension - Drum brakes = Notes = Beautiful 2015 VAN HOOL 20FT + 30FT galvanized ADR chassis with ABS/EBS, BPW axles with drum brakes, ADR (EX/II, EX/III, FL, AT) valid until 26.09.2026, for 1x 20FT or 1x 20FT SWAP or 1x 30FT tank container, unladen weight: 3,760 kg, permissible total weight: 39,000 kg, tires 385/65-R22.5 (L: 8/9/7 mm; R 13/8/13 mm), Dutch registration with valid periodic technical inspection (APK) until 26.09.2026. = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 80% Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 55%; Tire tread depth right: 50% Rear axle 3: Max. axle load: 9000 kg; Tire tread depth left: 45%; Tire tread depth right: 80% Weights Unladen weight: 3,760 kg Payload: 35,240 kg GVW: 39,000 kg Functional Lodpfx Amoy Tyvfensrl Body brand: Van Hool A3C002 Maintenance, History, and Condition APK (Periodic Technical Inspection): valid until 09.2026 Technical condition: very good Optical condition: very good Identification Registration number: ON-67-VS Additional Information Please contact Arne Honingh for further information.

Condition: used, Używana suszarnia rurowa do pracy ciągłej z sekcją chłodzącą produkcji COMESSA wykonana ze stali kwasoodpornej AISI 304. Komora o wymiarach: Ø 2400 x długość 14000 mm. Długość części suszącej: 7000 mm. Długość części chłodzącej: 7000 mm. Poprzednie zastosowanie: suszenie białego cukru z wydajnością do 30 T/h. Ślimak ze stali ko napędzany silnikiem el. o mocy 7,5 kW. Wentylator nadmuchowy wykonany ze stali ko, napędzany silnikiem elektrycznym o mocy 7,5 kW. Wentylator chłodzący wykonany ze stali ko, napędzany silnikiem el. o mocy 11 kW. Elementy instalacji do podgrzewania wstępnego, suszenia i chłodzenia wykonane ze stali kwasoodpornej. W zestawie dokumentacja producenta. Suszarnia dostarczana jest bez: Lrsdpfx Ameyhc N Nenol Silnika elektrycznego do napędu suszarni o mocy 45 kW. Wentylatora wyciągowego napędzanego silnikiem elektrycznym o mocy 55 kW. Nagrzewnicy parowej. Pełny opis oryginalnej instalacji na zapytanie. Weight: 21500kg Dimensions: diameter 3.35m x lenght 14m

Condition: used, Year of construction: 2015, No. 10033 Wet drum magnetic separator Steinert WDS 92 92 (without CE package) Used, year of construction 2015 According to our customer / the previous owner, the machine is fully functional and can be viewed on site Without CE package Highly efficient recovery of FeSi or magnetite from float-sink separation and wet processing of fines Lsdpjyl Sqwofx Amnsrl The Steinert WDS is particularly popular in the processing of heavy sludge or iron ore with grain sizes between 1 µm and 3 mm. In the regeneration of heavy beet, the wet drum magnetic separator essentially ensures the recovery of magnetite or ferrosilicon (FeSi). High field strengths are achieved through the use of powerful magnets made of neodymium-iron-boron and the special design of the magnet packs, making high separation rates of over 99 % possible. Sale on behalf of customer, ex location near 54634 Bitburg, without dismantling, transport and assembly Dismantling, transport and loading by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm drum diameter: 1.300 mm net drum length 4.200 mm adjustable inclination angle easy to clean inlet height: ± 1.700 mm (adjustable if necessary) Lodpfx Amsy Nax Eenorl discharge height: ± 1.000 mm power 3kW 400V, 50Hz 4 spray pipes Provided for extraction

Condition: used, Year of construction: 1981, total length: 3,200 mm, total width: 1,500 mm, total height: 2,100 mm, Colour: Green Ljdpfxjy Rrdce Amnerl Weight: 6.000 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: - Drive system: Conventional - Power [kW]: 11.0 - Press force [ton]: 100 - Max. working width [mm]: 3100 - Column gap [mm]: 2700 - Backgauge depth [mm]: 700 - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3200mm x 1500mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, axle configuration: 3 axles, first registration: 08/2014, color: other, Year of construction: 2014, Empty weight: 4.962 kg Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right 10 mm Lrsdpfx Amey S T Rmonel We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 08/2011, color: other, Year of construction: 2011, Empty weight: 5.490 kg Axle 1: left 6 mm right 6 mm Axle 2: left 8 mm right 8 mm Axle 3: left 12 mm right 12mm Ledpfx Amoy S T Ifenorl We have the possibility to stack trailers! 

Condition: good (used), Year of construction: 2005, power: 15 kW (20.39 HP), operating speed: 10 mm/s, total length: 4,000 mm, total width: 2,000 mm, total height: 3,000 mm, overall weight: 11,500 kg, controller manufacturer: Delem DA65, working width: 3,100 mm, bending force (max.): 175 t, distance between stands: 2,550 mm, control type: CNC control, number of axes: 5, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 175T Beam stroke: 225mm Table Width: 150mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Control: yes Crowning: yes Hydraulic toolclamping: yes Power: 15kW Length: 4000mm Width: 2000mm Height: 3000mm Weight: 11500kg Lrsdpfx Asyvz H Remnel

Condition: good (used), Year of construction: 2008, pressing force: 300 t, control type: CNC control, actuation type: hydraulic, CNC crowning Hydraulic tool clamping EFL Easy Form laser measuring & correction system Set tooling Laser guide protection Lredowrza Aepfx Amnsl Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between supports: 3150mm Max. pressing force: 320T Distance table mount: 570mm Max. stroke: 300mm Table width: 200mm Support throat: 400mm Descent speed: 120mm/min Working speed: 14mm/min Return speed: 130mm/min X-axis range: 1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg

Condition: good (used), pressing force: 100 t, total width: 3,000 mm, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operator Year of manufacture: 2007 Long stroke CNC Press brake 8 Axis controlled ASTRO 50Y AMADA Robot ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. When machining medium / fine thick and large dimension parts. Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. Programming has become particularly easy through EASY CAM software Safety CE Fence around machine and tobot Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) Length 8000mm Lrsdpjvwcduofx Amnsl Width 4000mm Please note: The information on this page is correct to the best of our knowledge and belief, and where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 2024, Minimum width 65 mm Maximium width 185 mm Load is 200 Metric Ton / Meter Operation angle from 60 - 180 Gr Die length 1000 mm and 500 mm sections Minimale Breite: 65 mm Maximale Breite: 185 mm Belastung: 200 metrische Tonnen / Meter Arbeitswinkel: 60°–180° Matrizenlänge: 1000 mm und 500 mm Segmente Länge: 1200 mm Ledpfx Aex Sw Sujmnjrl Breite: 1200 mm Höhe: 800 mm Gewicht: 1500 kg Length:1200mm Width:1200mm Height:800mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2016, functionality: fully functional, operating hours: 100 h, stroke length: 800 mm, operating speed: 9 mm/s, controller manufacturer: CADMAN TOUCH, working width: 12,000 mm, bending force (max.): 1,600 t, back gauge: 1,000 mm, distance between stands: 10,600 mm, control type: CNC control, number of axes: 15, Only 100 Working (table/guiders/tooling still in prohibitor) Installed never used in production only testing CNC T1 + T2 + T3 Bending help support arm in front 3 x HH 2600 Module backgauge 3 x Z1+R1+Delta1 Lower Tooling set Variable VLA 50-150 mm Upper Tooling set LVD 505; Adjustment V-Axis 59,3 to 249,3 mm Thermotec Oil chiller GC25T-35 max. 2200 kPa CADMAN TOUCH with the best software for pressbrakes Hydraulic top tool clamping Table width 500 mm Troath in column 1000 mm Max. bending length: 12000mm Distance between column: 10600mm Max. pressing force: 1600T Dis. Beam - Table: 1070mm Beam stroke: 800mm Table Width: 500mm Troth beam: 1000mm Approch speed: 80mm/min. Working speed: 9mm/min. Return speed: 90mm/min. Adjustment X-Axis back gauge:600mm Number of controlled axis: 15 (Y1/Y2/X/Z1/2/3, R1/2/3, Delta 1/2/3, T1/2/3 Control: CADMAN TOUCH Crowning: Yes Hydraulic toolclamping: Yes Power: 125kW Length: 14875mm Width: 5430mm Height: 7906mm Weight: 277500kg Why you need 1600 Ton Pressbrake, Bending force depends on: Material thickness Material strength Bend length Die opening When any of those go big, tonnage skyrockets. A 1600-ton press brake is used when: Plate is thick (20–60+ mm / ¾"–2½"+) Material is high-strength Parts are long (6–10+ meters / 20–30+ ft) Tight radii or deep bends are required Forming Heavy Welded structures like: Bridge girders Box columns Large beams and stiffeners Base frames for industrial machinery Shipbuilding Defence & Naval like: Hull sections Deck plates Bulkheads Reinforcement ribs Enegery & Infrastructure like: Wind tower sections Power plant components Pressure vessel shells (pre-forming) Transformer tanks Heavy Machining & Ground & Mining jobs like: Excavator frames Crusher housings Dump truck bodies Mining chute liners Furnace housings Kilns Massive welded assemblies Material to bend on 1600 t machine: Carbon steel: S235 / S275 / S355 A36, A572 Plate thickness: ~20–50 mm+ High strength steel S690 / S700 Ledpoygkuwefx Amnjrl Hardox, Strenx Much higher tonnage needed even at thinner gauges Stainles steel: 304 / 316 Needs ~1.5–2× the force of mild steel Wear-resistant plate Heat-resistant steels JOB Example: Bending 40 mm S355 steel over 8 meters can easily require 1,200–1,600 tons, depending on tooling. Bending instead of welding: Increases strength Reduces distortion Cuts weld time and cost Improves fatigue life Looks cleaner and more accurate A 1600-ton press brake is used when: The part is too thick Too strong Too long It’s not for sheet metal shops — it’s for heavy industry, shipyards, steel fabricators, and energy projects. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2024, condition: excellent (used), Segment radius top tooling for 1000 and 2000 Ton machine Full sets segmented on 835 mm and 10 sections to make 8000 mm Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35 Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42 Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50 Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58 Radius 60 / Radius 62 /  Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80 Ljdpfxox Sxuke Amnerl Length:12000mm Width:2000mm Height:1000mm Weight:15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, back gauge travel distance Z-axis: 1,000 mm, control type: CNC control, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Lodpoxzf Dzefx Amnorl

Condition: excellent (used), Year of construction: 2000, stroke length: 850 mm, operating speed: 8 mm/s, total length: 15,400 mm, total width: 6,500 mm, total height: 11,400 mm, overall weight: 407,000 kg, controller manufacturer: Cybelec DNC 1200, working width: 15,400 mm, bending force (max.): 2,000 t, distance between stands: 12,000 mm, number of axes: 8, Extra Heavy Duty Pressbrake 1 set top tooling 88 Gr 1 set lower dies Cybelec DNC 106EC controller Y1,Y2,X,R1,R2,R3,R4,OWK Dynamic Crowning Lower Beam What kind off jobs built for: Shipbuilding & Naval like ; Hull sections, deck plates, bulkheads ribs Defence & Military; armored vehicle structures, reinforced structe hardox / strenx Mining and Heavy Equipment; dump bodies, crusher housing, excevator, chute liners Contruction and Fabrication; bridge giders, box columns, steel frames  On and Offshore; pilers, decks, spreaders, crane componenet, wind energy offshore parts Boiler an vessels; pressure vessels, power plant components, tower or pole section   Bending examples: 35 mm thickness at 10 meter length 26 mm thickness at 12 meter length 20 mm thickness at 15 meter length Max. bending length: 15400mm Distance between column: 12000mm Ljdpfxsyvh Ars Amnsrl Max. pressing force: 2000T Dis. Beam - Table: 1500mm Beam stroke: 850mm Troth beam: 1250mm Approch speed: 80mm/min. Working speed: 8mm/min. Return speed: 80mm/min. Number of controlled axis:10 Crowning: Yes Hydraulic toolclamping: Yes Power: 132kW Length: 15400mm Width: 6500mm Height: 11400mm Weight: 407000kg

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, distance between stands: 2,550 mm, control type: CNC control, Max. bending length 3100 mm Distance between column 2550 mm Max. pressing force 120 T Dis. Beam - Table 470 mm Beam stroke 180 mm Troth beam 400 mm Approch speed 200 mm/min. Lrsdpfxoxyw Sbe Amnjl Working speed 10 mm/min. Return speed 120 mm/min. Adjustment X-Axis back gauge 1000 mm Number of controlled axis Y1 / Y2 / X/ Z1 / Z2 / R-Central Control TS1 Crowning Yes Hydraulic toolclamping Yes Power 7.5 kW

Condition: excellent (used), Year of construction: 2014, operating speed: 8 mm/s, reverse speed: 100 mm/s, total length: 2,470 mm, total width: 2,000 mm, total height: 2,100 mm, overall weight: 3,800 kg, controller manufacturer: CYBELEC CNC, working width: 2,100 mm, bending force (max.): 40 t, distance between stands: 1,650 mm, control type: CNC control, number of axes: 4, actuation type: hydraulic, Press brake TOSKAR - TA 2100-40 MACH-ID 9474 Make: TOSKAR Type: TA 2100-40 Control: CYBELEC CNC Year: 2014 Cybelec 2D Controll system 4 Axis controlled Y1 / y2 / X / Delta-R 1 set universal tooling Fiessler laser safe  Sheet support arms front side Max. bending length: 2100mm Distance between column: 1650mm Max. pressing force: 40T Beam stroke: 130mm Table Width: 100mm Troth beam: 300mm Approch speed: 100mm/min. Working speed: 8mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1009mm Number of controlled axis: 4 Power: 5.5kW Length: 2470mm Width: 2000mm Height: 2100mm Weight: 3800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Lsdpfx Amjyw Ip Ienerl

Condition: excellent (used), Year of construction: 2004, power: 25 kW (33.99 HP), stroke length: 350 mm, operating speed: 10 mm/s, total length: 6,000 mm, total width: 2,000 mm, total height: 3,400 mm, overall weight: 22,500 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Delem DA 65W, working width: 4,300 mm, bending force (max.): 230 t, distance between stands: 3,700 mm, control type: CNC control, number of axes: 5, actuation type: hydraulic, Press brake DARLEY - EHP-LS 230 43/37 MACH-ID 9469 Make: DARLEY Type: EHP-LS 230 43/37 Control: Delem DA 65W Year: 2004 Max. bending length: 4300mm Distance between column: 3700mm Max. pressing force: 230T Ljdpfeyvh S Tjx Amnsrl Beam stroke: 350mm Table Width: 250mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Crowning: yes Hydraulic toolclamping: yes Power: 25kW Length: 6000mm Width: 2000mm Height: 3400mm Weight: 22500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2024, Bending capacity: 60t Bending length: 1250 mm Distance between uprights (mm): 1050 Material thickness: 7.5 mm Stroke length (mm): 265 Throat depth: 410 mm Installation height: 530 mm Operating speed Y (mm/sec.): 10 Ljdpfed E If Sox Amnerl Motor power (kW): 7.5 Operating speed X (mm/sec.): 250 Length (mm): 2300 Width (mm): 1550 Height (mm): 2750 Weight (kg): 3,100 Standard equipment: Y1, Y2, X, R (4 axes) X = 650 mm X, R Control unit: DURMA DT15 European clamping system 60 mm die holder (only for European dies) Throat depth: 410 mm Backgauge: Siemens DC servo-driven, linear guide & ball screw system Protective cover Special accessories: European upper tool P97.75.R08 (one in segmented design) European lower tool M.460R.85 (one in segmented design) DURMA quick clamping system CE with manual F.AKAS II M -FPSC-B-C + safety cover & switch Other machines are available for demonstration at our Staufenberg location. Further information available upon request.

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: 2024 (new) Control system: DT 15 Bending length: 4050 mm Distance between the columns: 3600 mm Lodpfx Ajff Hvlemnjrl Y fast Speed: 100 mm / s Y Working speed: 10 mm / s Y Retraction speed: 100 mm / s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Projection: 450 mm 2 support arms 2 back gauge fingers Travel speed X-axis: 350 mm / s Travel in X-axis: 750 mm Travel speed in R-axis: (max.) 300 mm / s Travel distance R-axis: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Backgauge with motor and linear guide and ball screw thread Stop finger back gauge with height adjustment (R-axis, manual) CE die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, in accordance with global standards Electrical equipment, in accordance with global standards Option: CE certified Motorized crowning and X & R backgauge Engine power 37 kW Oil tank capacity 250 lt Length 5300 mm width 1910 mm Height 3230 mm Weight approx. 20000 kg

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data: Bending force: 600 tons bending length: 6050 mm passage between the uprights: 5100 mm Lodpfxefir U No Amnorl stroke: 365 mm Installation height: 700 mm Projection: 510 mm table height: 990 mm table width: 154 mm Y High speed: 80 mm Y Working speed: 7 mm/sec. Y retraction speed: 80 mm/sec. X axes working speed: 350 mm/sec. R axes working speed: 300 mm R Axes travel distance: 250 mm X axis distance: 750 mm Engine power: 55 kW length: 8050 mm width: 3200 mm height: 4250 mm Weight: 72000 kg Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC ModEva15T Servo motor backgauge & linear guided ball screw system (X-R) CNC Crowning European type tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standard electrical equipment according to worldwide standard Optional equipment Control unit - ModEva Premium , 69T and 66T CE Manuel F. AKAS II M FPSC-B-C + safety covers with switch CE F. AKAS-LC II AKAS-3 M Motorised + FPSC (Safety PLC) CE BLVT safety - only for tandem machines Z1, Z2 Axes X1, X2 Axes Bil0h3uvee R1, R2 Axles Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm - rear protection with light barrier AP3-AP4 Bending aid Height-adjustable laser angle measurement

Condition: new, Year of construction: 2024, Are you looking for a powerful press brake that can meet even the most demanding requirements? Then the Durma AD-S 803000 press brake with 3000 tons of pressure could be the perfect solution for your needs. With an impressive length of 8 meters and a stroke of 750 mm, this machine is capable of processing even large and heavy materials with the highest precision. The installation height of 1000 mm allows flexible and comfortable positioning of the workpiece. The heart of the machine is the DELEM-DA 66T movable control system, which ensures intuitive operation and precise control of the workflow. In addition, the press brake is a special design and can be configured according to customer requirements to meet all individual needs. If you are interested in Durma press brake, we are at your disposal for personal consultation. Other machines are also available and can be visited. Feel free to contact us for more information and let's find a customized solution for your needs together. Control type: DELEM DA-66T Lsdpfxji Da Syo Amnerl Protection oil: suitable for sea transport Front safety system: FPSC (MANUEL) Sheet metal support system: sliding support arm Stroke: 750 MM Backgauge type: X=1500 X, R Overhang:1050 MM Crowning: Hydromechanical Installation height: 1000 MM Power: 400V 50HZ Body type: Welded frame Under tool holder: DURMA Wide

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Control: DT 15 bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Y Working speed: 10 mm / s Y Retraction speed: 140 mm / s Motorized crowning table length: 630 mm table width: 154 mm table height: 900 mm stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Lrodpfofifg Hex Amnjl Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Option: CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg