Used Bosecker Portable Power Distribution Centre for sale (41,836)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 39,293 h, Movement X-Axis Movement 711 Y-Axis Movement 406 Z-Axis Movement 394 This 3-axis HAAS DM-2 vertical machining center was manufactured in 2016. It features extensive use with 39,293 power-on hours, 11,081 cycle start hours, and 6,377 feed cutting hours. The machine offers a travel range of 711 mm on the X-axis, 406 mm on the Y-axis, and 394 mm on the Z-axis. Consider the opportunity to buy this HAAS DM-2 vertical machining center. Contact us for more information. Bjdpfxjxgv Ube Adxjww Application Types Milling

Condition: excellent (used), Year of construction: 2016, XYZ 1550VS Gap Bed Centre Lathe EX Training College Machine 3 Jaw Chuck 2-axis Digital Readout Toolpost & Chuck Guard Footbrake (Modern Triumph 2000 size machine Manufactured & Installed 2016 Machine Capacity: Swing Over Bed 390mm Swing in Gap 610mm Swing Over Cross Slide 150mm Distance Between Centres 1250mm Cross Slide Travel 230mm Spindle: Spindle Speeds 20 – 2500rpm Spindle Power 5.75kW Spindle Bore 54mm Spindle Nose D1-6 For sale with Jet Machinery Ltd Jet Machinery Stock No: #79010 Machine Serial Number: 7715 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Bwsdpfexn Sf Sex Adxew Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS Bsdpfxswd Nw Ts Adxsww CHP unit price includes dismantling and loading onto your trucks. Year: 2010 Power: 1064 KW Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Currently running Full tech data sheet available. Set in very good condition. Serviced and maintained by engineers. Contact for more info and pictures.

Condition: good (used), Year of construction: 1996, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, CPV, 20FT swapbody tank container, 30,890L/ 1 comp. bottom discharge UNPORTABLE, T7 steam heating valid 5Y/CSC insp. until 02/2026 = More information = General information Year of construction: Sept. 1996 Model year: 1996 Usable material: Chemicals Weights Empty weight: 4,100 kg Bwedpfx Adexurr Eexew Payload: 29,900 kg GVW: 34,000 kg Functional Content of cargo space: 26,000 l Brand of bodywork: HOLVRIEKA 26.000L TC, 1 comp., L4BN, IMO-1,T11 Number of compartments: 1 Condition Technical condition: good Visual condition: good More information Contact Arne Honingh or Piet Swank for more information.

Condition: good (used), Power converter, power supply, power supply unit, switching power supply, power supply device, switching power supply unit Manufacturer: Murr Elektronik, Switch Mode Power supply Type: Eco-Rail-2 5-100-240/24 Technical data: see photo of the nameplate -Number: 2x switching power supply units available - Price: per piece Bodext Hbljpfx Adxeww -Dimensions: 135/50/H130 mm -Weight: 0.7 kg/pc.

Condition: good (used), RMS RMS vibration exciter with power amplifier and cooling fan Vibration exciter SW 1511/2 Power amplifier TGD 3000-000 00 IN: 3X400V-50Hz 14.5 KVA Cooling fan SWG 108 Condition: used Bwodpfxjdhxlge Adxsw Scope of delivery: (see picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 28,446 h, Control Unit Brand FANUC Movement X-Axis Movement 762 Y-Axis Movement 516 Z-Axis Movement 570 Bwjdsxgv T Dspfx Adxjw This 3-axis DOOSAN VC 510 was manufactured in 2014. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining center. Contact us for further details regarding this machine. Application Types Milling

Condition: ready for operation (used), Indramat TVM 2.1-50-220/300-W1-220/380 AC. Servo Power Supply, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Bodpfxsi Ebrgo Adxsww

Condition: used, Year of construction: 2017, travel distance X-axis: 435 mm, travel distance Y-axis: 465 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 80 kg, total height: 2,755 mm, total length: 3,360 mm, total width: 3,870 mm, overall weight: 8,500 kg, spindle nose: MAS BBT 40, 5-axis Vertical Machining Centre CNC Control Matsuura G-Tech 31 i Table size ø 130 mm Table load 80 kg Number of pallets 10 max workpiece dia x height 330 x 300 mm Movement X-axis 435 mm Bwedpfx Adexqpp Hsxow Movement Y-axis 465 mm Movement Z-axis 560 mm C-axis (table rotation) 360° A-axis (table tilt) -125/+10° Spindle speed 50 - 15.000 R/min Spindle taper MAS BBT 40 Spindle motor 7,5/5,5 kW Magazin capacity 90 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 1997, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, UBH Universal Bulk Handling 31,169L, 20FT tank container / swap body, bottom discharge, steam heating, insulated, 5-year inspection/CSC valid until: 05-2027 = Further Information = Bwodpsxurqnefx Adxow General Information Year of manufacture: Oct. 1997 Weights Tare weight: 4,375 kg Payload: 31,625 kg Gross vehicle weight: 36,000 kg Functional Cargo compartment dimensions: 715 x 255 x 267 cm Cargo volume: 31,122 l Body manufacturer: UBH Universal Bulk Handling Number of compartments: 1 Condition Technical condition: very good Visual condition: very good Further Information Please contact Arne Honingh or Piet Swank for more information.

Condition: good (used), Power supply, power converter, power supply unit, switching power supply, DIN rail power supply Bwedpfjxt E Svsx Adxew Manufacturer: Phoenix Contact, power supply -Type: TRIO-PS-2G/1AC/24DC/20 .: 2903151 -Input: AC 100-240V / DC 110-250V -Output: 24 V -Dimensions: 165/70/H130 mm -Weight: 1.3 kg

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, laser power: 20 W, total width: 605 mm, total height: 1,080 mm, total length: 350 mm, overall weight: 40 kg, warranty duration: 12 months, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional: 30 Watt, 50 Watt) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m - Extraction optional Bodpfjxuqxqox Adxeww

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 2440 mm Measurements depth 2180 mm Measurements height 2900 mm Machine weight 5540 kg Control Unit Brand HURCO Model MAX5 Main Drive Spindle speed range 12000 RPM Number of axis 5 Movement X-Axis Movement 760 mm X-Axis Rapid Traverse 35 m/min Bwedpfx Aewwm T Eedxow Y-Axis Movement 510 mm Y-Axis Rapid Traverse 35 m/min Z-Axis Movement 520 mm Z-Axis Rapid Traverse 30 m/min A-Axis Movement +30°/-110°, +/- 7 sec A-Axis Rapid Traverse 25 RPM C-Axis Movement 360°, +/- 7 sec C-Axis Rapid Traverse 25 RPM Workpiece Workpiece weight 140 kg Table Number of tslots 6 Table load 200 kg Tools Number of index 40 Max weight 7 kg Max tool length 300 mm Media Main electronic connection 31 kVA / 45 A / 400V Additional Equipment Central lubrication system: 1 pump (X,Y,Z) Taper DIN69871 SK-40 Material of machine bed: Cast-iron This 5-axis Hurco VMX30Ui + BMO Automation Titanium 50 was manufactured in 2017. Ideal for complex, multi-angle machining with its advanced vertical machining centre design. If you are looking to get high-quality milling capabilities, consider the Hurco VMX30Ui machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, SincoTec Model: POWER SWING 100 MOT Big Table The SincoTec POWER SWING 100 MOT is a high-performance resonance test bench designed for fatigue testing of materials and components. This system enables dynamic load testing with high forces (up to ±100 kN) while ensuring precise control. Typical applications include lifetime testing, fatigue strength testing, and component validation under realistic conditions. With its robust construction, precise sensors, and stable granite table, the test bench is ideally suited for research, development, and quality control in both industrial and academic settings. Notes: The resonance test bench is particularly well-suited for material and component testing under dynamic loads. Technical Data: General Data – Test Bench: - Overall height: 1215 mm (without clamping fixture) - Width: 2005 mm - Depth: 1205 mm - Maximum force amplitude: 50 kN - Maximum total force: ±100 kN - Sensor accuracy: at least class 1 (according to DIN EN 10002-3) Control Cabinet: - Overall height: approx. 1800 mm - Table height: 1080 mm - Width: 650 mm (narrow tabletop) / 1420 mm (wide tabletop) - Depth: 700 mm - Weight: 180 kg (with granite tabletop approx. 240 kg) - Color: RAL 9006 (white aluminum), tabletop midnight Bwodpfx Aoxrlkvedxew Installation Requirements: - Required space: 4.3 × 3.0 m - Minimum ceiling height: 2.5 m - Floor load capacity: 2.0 t/m² - Power supply: 400 V / 50 Hz (three-phase, clockwise rotation) - Connection: 5-pin CEE socket, 16 A - Fuse protection: 16 A - Weight: approx. 3.6 t Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in the technical data; all information provided without guarantee!) If you have any further questions, please do not hesitate to contact us by phone.

Condition: new, functionality: unexamined, power: 1,200 kW (1,631.54 HP), first registration: 05/2014, overall weight: 8,500 kg, color: grey, operation weight: 8,500 kg, Year of construction: 2014, machine/vehicle number: SE630M10AEM, Large AEM alternators, 4 units, intended for two offshore vessels that were never built due to bankruptcy. The alternators have never been used and have always been stored in a sheltered, heated warehouse. Technical details available upon request, and the alternators can be inspected by appointment. Bjdpoxugw Njfx Adxsww

Condition: excellent (used), Year of construction: 1999, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, WELFIT ODDY 20FT ISO Tank Container 24,890L UN PORTABLE T11 Bottom discharge Steam heating NEW 5Y- + CSC inspection valid until 04/2028 = Further Information = General Information Year of manufacture: Aug. 1999 Model year: 1999 Suitable for: Chemicals, construction water, fuel, wastewater Weights Tare weight: 3,900 kg Payload: 32,100 kg Gross weight: 36,000 kg Bwjdpfx Adsxuiaaexew Functional Cargo compartment capacity: 24,690 l Body make: Van Hool 24,690L TC, 2 compartments (12,290L/12,400L), L4BN, IMO1, T11 Number of chambers: 2 Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh or Piet Swank for further details.

Condition: good (used), Year of construction: 2000, Drilling unit SUHER Power master, year of manufacture 2000. Bwsdpsxr Dlxjfx Adxsw

Condition: used, Year of construction: 1995, x-travel 2000 mm y-travel 425 mm z-travel 425 mm Number of working hours lässt sich nicht auslesen h cooling Kühlung ja Bwjdpfx Ador D Tu Ijxsw max. 10.500 ja control Simens Sinumerik 810 weight 6700 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 36,700 h, Control Unit Brand SIEMENS Model Sinumerik 840D Powerline Main Drive Number of axis 5 Movement Bwedpev Sfv Ajfx Adxsw X-Axis Movement 1250 mm Y-Axis Movement 880 mm Z-Axis Movement 800 mm Tools Type of tool holder HSK63 Additional Equipment Infrared Scanner Tool Measurement Flushing Gun Internal Coolant Supply (IKZ): 40 bar Tank with Paper Belt Filter: 900 litres This 5-axis DMG GILDEMEISTER DMC 125U universal machining centre was manufactured in 2004. Ideal for complex and precise machining tasks, it offers enhanced flexibility and performance. Consider the opportunity to buy this DMG GILDEMEISTER DMC 125U universal machining centre. Contact us for more information. Application Types Milling

Condition: used, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer Service Performed General Information: For sale is a used resonance testing system Power Swing 20 kN from Sincotec Test Systems GmbH. The test bench was operated in single-shift use, with all maintenance carried out regularly by the manufacturer. Key Features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance included - Ideal for research, testing, and development applications Bsdpfx Asxrffaedxeww Technical Data – Test Bench Feature / Value - Overall height of test bench: 1215 mm (without clamping device) - Width of test bench: 2005 mm - Depth of test bench: 1205 mm - Maximum force amplitude: 10 kN - Maximum total force: ±20 kN - Measurement transducer accuracy: min. Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Feature / Value - Overall height of control cabinet: approx. 1800 mm - Table top height: 1080 mm - Width of control cabinet: 650 mm (narrow table top) / 1450 mm (wide table top) - Depth of control cabinet: 700 mm (narrow table top) / 800 mm (wide table top) - Weight: 152 kg (small table top) 187 kg (large table top); with granite plate: 247 kg Site Requirements Feature / Value - Required space: 4.3 × 3.0 m - Required ceiling height: 2.5 m - Floor load capacity: 234 N/cm² Power Requirements Feature / Value - Voltage: 400 V three-phase AC with neutral and protective earth - Phase rotation: clockwise sequence - Voltage fluctuation: ≤ ±10 % - Short voltage dips: < 20 ms - Limits for continuous interference: interference class A according to VDE 0871 - Frequency: 50 Hz ± 1 % - Protective earth / ground resistance: < 0.3 Ω Connection and Fusing Feature / Value - Power supply: 400 V / 50 Hz (clockwise phase sequence) - Connector: CEE plug, 5-pin, 16 A - Fuse rating: 16 A Test bench weight: approx. 3.6 t Max. weight of clamping device: 250 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical specifications!) Further questions can be answered by phone.

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand OKUMA Model OSP-P200M Main Drive Spindle speed range 15000 rpm Bodpfxjxq Hr Ee Adxsww Movement X-Axis Movement 560 Y-Axis Movement 610 Z-Axis Movement 625 This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2007. It features a 560mm X-axis, 610mm Y-axis, 625mm Z-axis, and a table size of 400x400mm. The machine includes a 15,000 rpm spindle, 100-tool matrix magazine, and OSP-P200M control. It also boasts a 6 APC/pallet pool and a Mayfran Consep 2000 chip conveyor. Consider the opportunity to buy this Okuma MA-400HA horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1994, Control Unit Brand FANUC Model Series 16-M Movement X-Axis Movement 400 Y-Axis Movement 300 Z-Axis Movement 300 Bwodpfx Adjxqtaiexew This 3-axis FANUC Robodrill Alpha-T10A was manufactured in 1994. It features a FANUC Series 16-M CNC, a table size of 650x400 mm, and can handle a maximum part weight of 200 kg. It has 10 tool pockets, enhancing its versatility for various machining tasks. Consider the opportunity to buy this FANUC Robodrill Alpha-T10A vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2021, operating hours: 295 h, Control Unit Brand HAAS Main Drive Spindle speed range 15000 Tool taper HSK A63 Number of axis 5 This 5-axis HAAS UMC 1500 DUO was manufactured in 2021, featuring a high-speed 15,000 rpm spindle, HSK A63 interface, and a 50+1 side-mounted tool changer. It includes internal cooling at 21 bars, chip conveyor, and full 5-axis capabilities for complex machining tasks. Consider the opportunity to buy this HAAS UMC 1500 DUO vertical machining centre. Contact us for more information about this machine. Bwjdoxuldbopfx Adxjw Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, General Data Bwedpfx Aexp Sqqjdxow Machine weight 15000 kg Control Unit Brand MAZATROL Model Smooth Main Drive Number of axis 5 Movement X-Axis Movement 630 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 1100 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 600 mm Z-Axis Rapid Traverse 56 m/min A-Axis Movement -120° to +30° A-Axis Rapid Traverse 18000°/min C-Axis Movement ±360º C-Axis Rapid Traverse 18000°/min Tools Number of index 40 Additional Equipment Equipped with Multiple-Surface / Simultaneous 5-axis Machining Center capabilities Features a Knoll 640 S-1 chip conveyor and Knoll KF400 coolant pump This 5-axis Mazak VARIAXIS i-700 was manufactured in 2017. Ideal for complex and precise machining tasks, this vertical machining centre ensures efficient multi-surface processing. Consider the opportunity to buy this Mazak VARIAXIS i-700 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1997, General Data Measurements width 4500 mm Measurements depth 2900 mm Measurements height 3428 mm Machine weight 14000 kg Bwsdjxpyukopfx Adxow Main Drive Number of axis 4 Movement X-Axis Movement 630 Y-Axis Movement 600 Z-Axis Movement 650 Additional Equipment Tool Storage: 40 pcs This 4-axis MORI SEIKI SH-50 was manufactured in 1997. A reliable horizontal machining centre, it offers robust construction and precision engineering. Ideal for complex machining tasks, this unit has maintained consistent performance over the years. Consider the opportunity to buy this MORI SEIKI SH-50 horizontal machining centre. Contact us for more information. Application Types Milling