Used Binding Press for sale (15,367)

Condition: good (used), Matrices, 100 mm x 2 Offset punches x 2 Nedpfx Aezaitrsbkjwh In good condition

Condition: new, Year of construction: 2024, pressure 60 t stroke 400 mm Nedpfx Abovcrmvskowh table surface area 800 x 500 mm feed down 4,03 mm/sec feed up 5,82 mm/sec column daylight 820 mm oil pressure max. in the work cylinder 400 bar oil volume 26 l voltage 400 V / 50 Hz total power requirement 3 kW weight of the machine ca. 0,55 t dimensions of the machine ca. 1,5 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • Pressure cylinder moveable horizontally, • Working table hydraulical adjustable, • Cylinder Ø 150 mm, piston base Ø 85 mm.

Condition: new, Year of construction: 2024, feed under pressure 2,7 mm/sec pressure 100 t stroke 400 mm table surface area 920 x 560 mm feed down 4,25 mm/sec feed up 8,22 mm/sec oil pressure max. in the work cylinder 385 bar oil volume 26 l diameter of piston 125 mm column daylight 920 mm voltage 400 V/ 50 Hz total power requirement 4 kW Nwedpfjvcrm Asx Abkeh weight of the machine ca. 0,9 t dimensions of the machine ca. 1,7 x 0,9 x 2,1 m • unused workshop press, (Demonstration machine) • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjusted in height, • Cylinder Ø 175 mm, piston base Ø 125 mm.

Condition: used, Year of construction: 2022, operating hours: 2,919 h, pressing force: 660 t, Equipment: CE marking, Standard equipment Machine - Closed machine frame - Press beam - Spherical bearing for the press beam with press beam inclination - Electro-hydraulic upper drive - Block hydraulics Njdpfszfy Aysx Abkswh - Length measuring system (Y-axis) - Hydraulic oil filling (lifetime filling) - Oil cooler Crowning - Self-regulating crowning Back gauge - Back gauge finger (2 pieces) Control - Machine control T3500T Multi-Touch - Integrated TRUMPF technology data Data transfer - USB interface - RJ-45 network interface - Network capability - Remote support interface Operation - Control unit with foot switch Safety - CE marking and EC Machinery Directive - Standard safety device _____ Extended machine equipment Back gauge - 5-axis back gauge (X, Delta X, R, Z1 and Z2 axes) Tool clamping - Hydraulic TRUMPF upper and lower tool clamping Control - DXF import - 3D visualization for T3500T control Angle assistants - ACB Laser (Automatically Controlled Bending), manually adjustable Operation - Work area lighting, front and rear Material handling - 2 support consoles Safety - BendGuard

Condition: good (used), Year of construction: 2013, functionality: fully functional, Used Durma press brake Type AD S 30175 Capacity 3050 x 175 tons Nwjdpfezbhnkjx Abkeh Delem DA66T control system Y1, Y2, X and R axis CNC controlled CNC crowning Amada / Euro clamp Includes a set of tooling

Condition: good (used), Year of construction: 2008, functionality: fully functional, Well-maintained, used E Brake by Safan Type E Brake 100 3100 Capacity 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Manual crowning Hydraulic Wila NS top clamp Nwodpjzbhk Eofx Abksh

Condition: good (used), Year of construction: 1996, Well-maintained, used press brake from Beyeler / Bystronic. Type PR6 150 4100 Capacity: 4100 x 150 tons Cybelec DNC 880S Y1, Y2, X, R, Z1, and Z2 axes CNC controlled Includes a set of tools. Nedpfezbhh Rex Abkswh

Condition: ready for operation (used), Year of construction: 2010, pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, clearance between the columns: 4,050 mm, total length: 6,100 mm, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, Hydraulic press brake Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S Year of manufacture: 2010 Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Bending length: 5050 mm Distance between uprights: 4050 mm Throat depth: 405 mm Stroke of Y-axis: 400 mm Installation height: 720 mm Table width: 140 mm Motor power: 37 kW Oil capacity: 600 L Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 m Weight: approx. 34 t Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 • Control system: Cybelec ModEva 10S, 2D – graphic control • Upper tool clamping system Trumpf/Wila, hydraulic • Lower tool clamping system Trumpf, hydraulic • CNC-controlled crowning • Safety light curtain Lazersafe • 2 pcs. CNC bending aids incl. parking position • Pneumatic die shifting • Foot switch • Very large tool package, as shown in the photos • LCB angle measuring system (2 x front, 2 x rear) Nwodpszd Tf Sofx Abksh All information without guarantee.

Condition: good (used), Rear back gauge fingers for Promecam press brakes, adjustable in height. Nwedpfxszagq Ue Abkjh Sold as a complete set or in pairs.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 00026, overall weight: 400 kg, Specifications: 8 bar 24 V Nwjdpfowrp Iusx Abkjh 80 kN 3 K 150 E The Arnold & Shinjo / Multipower Farger & Joosten C-Press is a powerful and versatile hydropneumatic riveting press, ideal for efficient and precise joining of components. Thanks to its robust design and reliable hydraulic technology, it allows for high force transmission in various riveting tasks, making it a valuable solution in manufacturing and assembly. The press stands out for its ease of use and flexibility, so it can be used in different production processes.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 10.8 kW (14.68 HP), pressing force: 130 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 160 mm/s, table length: 3,200 mm, throat depth: 400 mm, distance table to ram: 480 mm, clearance between the columns: 2,600 mm, total length: 3,700 mm, total width: 1,515 mm, total height: 2,630 mm, overall weight: 8,120 kg, control type: CNC control, degree of automation: automatic, actuation type: electric, Equipment: CE marking, documentation/manual, safety light barrier, SENFENG BDE13032 CNC Press Brake – 3200 mm × 130 Tons The SENFENG BDE13032 is a CNC press brake designed for precise, stable, and efficient sheet metal bending. With a working length of 3200 mm and a pressing force of 130 tons, it is suitable for metal fabrication companies, sheet metal processors, mechanical engineering, switchgear manufacturing, enclosure production, construction machinery, and general industrial bending applications. The machine is equipped with the DELEM DA66S CNC control system. It supports 2D touch-graphic programming, 3D product simulation, a 24-inch color display, a USB interface, and optional Industry 4.0/OPC-UA connectivity. This allows even complex bending tasks to be programmed efficiently and produced with high repeatability. Key technical data: • Model: SENFENG BDE13032 • Press force: 1300 kN / 130 tons • Working length: 3200 mm • Frame distance: 2600 mm • Stroke: 400 mm • Upper beam stroke: 200 mm • Open height: 480 mm • Dimensions: approx. 3700 × 1515 × 2630 mm • Machine weight: approx. 8120 kg • Main servo motor: 10.8 kW • X-axis travel: 480 mm • X-axis speed: 400 mm/s • X-axis accuracy: ±0.02 mm • R-axis speed: 200 mm/s • R-axis accuracy: ±0.05 mm Bending capacity at 3200 mm bending length: • Carbon steel: up to 4.5 mm • Stainless steel: up to 3 mm • Aluminum: up to 7 mm Bending accuracy: • Angular accuracy over the entire length: ±30′ • Straightness accuracy over the entire length: ±0.15 mm • Dimensional accuracy of the bending length: ±0.15 mm The machine bed is made of Q235B steel and offers high toughness, impact resistance, and long-term stability. The integrated tongue-and-groove welded structure increases welding strength and reduces the risk of deformation. The frame and upper beam are precisely machined as a unit to reduce positioning errors and ensure stable bending performance over long periods of use. The CNC-controlled compensation table compensates for the deflection of the upper and lower beams during the bending process. The CNC system calculates the necessary compensation based on the bending load and automatically adjusts the wedges. This ensures that the bending angle remains constant over the entire sheet metal length. Main configuration: • DELEM DA66S CNC control • REXROTH hydraulic control • HYTEK oil pump Nwedpozhgltofx Abksh • SCHNEIDER main electrical system • HIWIN drive components • SKF cylinder seals • SENTEK / GIVI magnetic scale • CNC-controlled deflection compensation • European standard upper and lower tooling • LED lighting in the work area • Adjustable front sheet support with linear guide Optional equipment includes a DSP safety light curtain, a WILA New Standard clamping system, VERA hydraulic clamps, double-sided quick clamps, and smart factory LAN connectivity. Depending on the configuration and market version, the series has SGS and other relevant certifications. SENFENG Germany offers professional consulting, installation, commissioning, training, and after-sales service. The BDE13032 is a reliable solution for companies seeking precise bending, a stable machine structure, modern CNC control, and long-term production efficiency.

Condition: used, Year of construction: 2013, total length: 3,050 mm, total width: 1,650 mm, total height: 2,350 mm, Colour: Grey Weight: 5.690 kg - Year: 2013 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 7304138524 - Drive system: CNC - Control system brand: Durma - Power [kW]: 7.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 60 - Max. working width [mm]: 2050 - Column gap [mm]: 1720 - Backgauge depth [mm]: 800 - Crowning system: Mechanical - Tools included: Yes Njdpfx Abezbhy Tokswh - Options: Digital readout - Transport dimensions: 3050mm x 1650mm x 2350mm (l x w x h) - Transport weight [kg]: 5690kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Nsdpfxjya Iaqo Abkjwh Good condition

Condition: good (used), Hand-operated spindle press, homemade, from a training center Pressing force: approx. 5-10 tons Njdpfozcqmlex Abkjwh Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A Nwjdpfx Abezbxwiskeh 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, year of last overhaul: 2025, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Nwedpfx Aszbxvlebkjh Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Used Durma press brake Type AD S 30135 Capacity: 3050 x 135 tons Cybelec ModEva 15T CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC controlled CNC crowning Nwedpeza U Twsfx Abkeh Amada / Euro clamping Includes a set of tooling

Condition: good (used), Year of construction: 2006, Used 4-meter CNC press brake by Bystronic Type PR 200 4100 Capacity 4100 x 200 tons Cybelec CNC control Y1, Y2, X, R, Z1 and Z2 axes Hydraulic upper and lower clamping Hydraulic CNC crowning Nwsdjza U Nrepfx Abksh Includes a set of tools

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition Nwodex Sr Evepfx Abkjh and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 1995, Like-new pneumatic punch / stamping press from a training workshop, with a base frame. Punching force: 5 t Njdpezcpv Sefx Abkewh Double strokes/min at max. stroke: 30 Stroke length: 40 mm Installation height: 240 mm Overhang: 110 mm Table size: 250 x 200 mm Operating pressure: 10 bar Dimensions L x W x H: 250 x 370 x 1450 mm Weight: approx. 100 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1991, Used press brake from Safan Type CNCS 110 4300 Capacity 4300 x 110 tons Control system updated, ESA CNC control Y1, Y2 and X axes CNC controlled Equipped with a flat-bedding system / bending / hemming function Nedpfjza T Dbjx Abkowh Includes a set of tools

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, type of input current: three-phase, overall weight: 350 kg, input voltage: 400 V, total length: 500 mm, total width: 520 mm, total height: 1,200 mm, input frequency: 50 Hz, DGUV certified until: 08/2027, Dough divider and forming machine Record roll press Newly revised dividing head New stainless steel knife Connection: 400V, 16A CEE plug Dimensions: 520 x 500 x 1200 mm (W x D x H) Used machine, refurbished with warranty + spare parts service Option: ONLY AVAILABLE FROM US! New forming plate Delivery service Stainless steel platform Maintenance contract Training and commissioning Nedpfx Abeuav Itekjwh You will find a large selection of roll presses only with us!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 08/2027, type of input current: three-phase, overall weight: 500 kg, year of last overhaul: 2025, Eberhardt Optimat S 4 Roll Press Stainless steel design Simple manual operation Stand-alone machine, dough divider and rounding machine Top-quality roll press with 3 rounding plates TAS system, 30-piece Nsdpfxsy Hwmhe Abkjwh For round and square rolls DGUV V3 certified – available only from us Connection: 400 V, 16A CEE plug Used machine We have many other bakery machines in stock!

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Bale press Presto CC 50 M, year of manufacture 2015, with lifting and tilting device. Technical data: Manufacturer: Presto Type: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Feed opening: 1030 x 1100 mm Feed volume: 0.85 m³ Tying: 3-wire, manually Throughput at a bulk density of: 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (L x W x H) Machine weight: approx. 4000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video on our website or our YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or any errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Njdpfx Abozc Hz Eskewh Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Baler Presto CC 40 M, Year of manufacture: 2017 Technical Specifications: Manufacturer: Presto Model: CC 40 M Njdszc Hy Uepfx Abkewh Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Binding: 4-fold, polyester strapping, manual Throughput rate at bulk density of: 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale size: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3,800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Operating instructions and CE declaration are available. Note: Channel discharge is fully automatic and regulated. Please note: All technical data is based on the manufacturer's information. We do not accept liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. Sale is ex-works, prepayment required, without warranty or guarantee.