Used Basket Dishwasher for sale (1,138)

Year of construction: 2018, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: M iClean HM mit GIO, Our 10 Meiko pot washers with the model designation DV 80.2 PW and built in 2015 2016 are for sale. Condition good, ran partly with soft water. These machines are former leasing devices. With 6 months spare parts guarantee. Preventive maintenance was always carried out with the replacement of some wearing parts. Inspection and test run on site possible and desired. Technical specifications: Performance up to 60/40/17 baskets (corresponds to approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program run times: 60/90/210 seconds Basket dimensions in mm: 500 x 500 Insertion height: 440 mm Tank capacity: 22 l Water consumption per basket: 2.6 l Dkjdspy Dxropfx Af Usi Tank heater: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: stainless steel Connected load: 400 V / 11.2 kW (cold), 9.7 (warm) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical installation: Electrical connection: three-phase current 3 NPE, 400 V, 50 Hz. The circuit corresponds to the regulations of the VDE Water installation: The dishwashers can be connected to the fresh water network without the interposition of safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. The installation regulation EN 1717 must be observed. expiry ¾ ̋. On-site wall drain max. 700 mm high. Length of the connection lines approx. 1.8 m from the dishwasher. Collection of the machines desired. Dispatch by freight forwarder at cost assumption possible.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 04/2021, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Dkedpfeyr D Hdex Af Uei Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 04/2021, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Dodjyq Nyaopfx Af Uski Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, MAN fire engine with Bronto Skylift 32-meter telescopic platform aerial work platform, formerly used by a plant fire brigade. Very good used condition. Year of manufacture: 06/2000. Original price: 1,390,000 DM (650,000 €). MAN chassis with powerful 410 HP diesel engine / 11,967 cm³ displacement. Automatic transmission / mileage approx. 39,000 km. Bronto Skylift 32m telescopic boom with articulated section / front basket + option to use as a crane arm with up to 2 tonnes lifting capacity. Firefighting superstructure as shown in photos, equipped with Rosenbauer pump delivering 5,000 liters per minute. Technically in very good condition, test runs possible. Complete documentation available in several folders. Overall height ONLY 3,550 mm. Permissible total weight approx. 26,000 kg. Sale of the used vehicle as is, without warranty or guarantee, ex-stock Korschenbroich. Dedpjx Ed Rzefx Af Ujki

Condition: good (used), Year of construction: 2014, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 2.020 kg Functional Mast: articulated arm Lifting capacity: 450 kg Dkodoxcuq Tepfx Af Usi Working height: 4.010 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Transport dimensions (LxWxH): 14,6x2,5x3,05 Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 1250AJP Year of build: 2014 Condition: Used Data: Max. working height: 40,10 m Platform height: 38,10 m Max. reach: 20,25 m Platform lifting capacity: 450 kg Platform dimensions LxW: 2,44 x 0,92 m Swivel range: endlos Max. climbing capacity: 45% Total dimensions LxWxH: 14,60 x 2,50 x 3,05 m Movable up to working height: 40,10 m Wheel pressure max.: 130 kN Ground clearance: 0,26 m Drive type: Diesel Own weight: 20.020 kg Special features: Rotatable work basket, basket arm/rotation angle 130°, all-wheel drive, pendulum axle, built-in generator for 230V, socket in the basket. Location: 41468 Neuss: immediately available

Condition: used, Year of construction: 2010, lifting height: 1,720 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 495 kg Functional Lifting capacity: 180 kg Working height: 487 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 1,2x0,77x0,55 Production country: IT Additional information Please contact Christian Theißen for more information Manufacturer: Braviisol Model: Leonardo Lui Mini Year of build: 2010 Condition: Used Data: Max. working height: 4,87 m Platform height: 2,87 m Platform dimensions LxW: 1,14 x 0,68 m Max. basket load: 180 kg Max. Basket load on extension: 180 kg Drive type: Battery Platform lenght pushed out: 1,72 m Total dimensions LxW: 1,20 x 0,77 m Height transport position with railing: 1,72 m Height transport position without railing: 0,55 m Movable up to working height: 4,87 m Ground clearance: 0,03 m Only indoor using: yes Own weight: 495 kg Special features: White tires extremely maneuverable, turns on the spot. Anchor points for restraint points (PSA) available Dedpfowprgzjx Af Ujki Location: 41468 Neuss immediately available

Condition: excellent (used), mileage: 167,450 km, power: 120 kW (163.15 HP), first registration: 12/2016, fuel type: diesel, fuel: diesel, color: white, emission class: euro6, total length: 7,230 mm, total width: 1,990 mm, total height: 3,400 mm, Year of construction: 2016, operating hours: 291 h, Equipment: ABS, AdBlue, USB port, air conditioning, airbag, central locking, electric window regulation, power assisted steering, power mirror, soot filter, traction control, trailer coupling, Technical information Dksdpfxown Ikao Af Uei Number of cylinders: 4 Engine capacity: 2.143 cc Weights Empty weight: 3.810 kg Carrying capacity: 1.190 kg GVW: 5.000 kg Functional Mast: telescopic Lifting capacity: 200 kg Lift height: 1.400 cm Condition Technical condition: very good Visual appearance: very good Damages: none Identification Registration number: 70-BHV-7 Additional information Please contact Moussa or Youssef for more information VIDEO: Very nice and neat Mercedes Sprinter 516 CDI 163 HP Euro 6 Custers Aerial platform 14 meters working height Remote control and basket control (from the basket or with remote control) 283 working hours on PTO and 8 hours on electric motor 167000 KM (Last service and inspection at 163000 KM) GVW 5000 KG Technically and optically in very good condition

Condition: used, Year of construction: 2012, mast type: telescopic, fuel type: diesel, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 16.892 kg Functional Lifting capacity: 230 kg Working height: 2.810 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 2610 m Transport dimensions (LxWxH): 9,8x2,49x3,18 Production country: US Additional information Dkodpfx Aowc Snfjf Uei Please contact Christian Theißen for more information Manufacturer: JLG Model: 860SJ Year of build: 2012 Condition: Used Data: Max. working height: 28,10 m Platform height: 26,10 m Max. reach: 23,40 m Platform lifting capacity: 230kg Platform dimensions LxW: 2,44 x 0,91 m Swivel range: endless Max. climbing capacity: 45% Total dimensions LxWxH: 12,30x 2,49 x 3,04 m Transport dimensions LxWxH: 9,80 x 2,49 x 3,18 m Movable up to working height: 28,10 m Wheel pressure max.: 82kN Ground clearance: 0,30 m Drive type: Diesel Own weight: 16.892 kg Special features: Rotatable work basket basket arm/vertical rotation angle +70°/-60° four-wheel drive pendulum axle

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 06/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Dodpfx Ajym T Hcsf Uoki Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels Spare wheel (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets TrailerConnect S.KO COOL country package wave 3

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 06/2018, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF axles Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock EBS-braking system, 2S/2M, 2 sensors on 1 axle 1 pair(s) of load lock rails, horizontally, inserted into side walls Disc brakes 430 mm incl. 2 temperature sensor Ventilation flap, at the front wall, at top of left side, Ventilation flap, small, at rear, right si Lift axle control for 1st axle Low noise aluminium floor, suitable for PIEK floor, tested Dksdpjym S R Tefx Af Uoi according to CSC/EN 283, reinforced at re Spare wheel holder as fixed basket for one spare wheel, right side, behind axles, 2nd spare wheel ho 1 spare wheel (6+1) tyres - 385/65R22.5 12 sets of double deck rails, type Airline, inserted into side walls, full length 1.600 mm from the Loading capacity 33 / 66 euro paletts Internal Length/width/heigth - 1331cm/246cm/265cm Gross vehicle weight: 39.000 kg Own weight - 8 813 kg 3 axles Pallet box for 24 Euro-pallets

Condition: used, Year of construction: 2013, lifting height: 3,980 mm, General information Field of application: Construction Weights Empty weight: 32.360 kg Functional Lifting capacity: 600 kg Working height: 7.200 cm Working width: 255 cm Condition General condition: average Technical condition: average Visual appearance: average Dksdpfev Tkgcex Af Uei Other information Delivery terms: EXW Max. horizontal reach: 3800 m Transport dimensions (LxWxH): 13,71x2,55x3,98 Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: T 720 Year of build: 2013 Condition: Used Data: Max. working height: 72,00 m Max. platform height: 70,00 m Max. reach: 38,00 m Total dimensions LxWxH: 13,71 x 2,55 x 3,98 m Platform dimensions LxW: 3,82 x 0,97 m Max. basket load: 600 kg Swivel range: 500° Ground pressure: 290 kN Ground clearance: 0,15 m Support width vertical: 2,54 m Support width one side: 5,55 m Support width both sides: 8,61 m Support length: 7,75 m Empty weight: 32.360 kg Special features: Rotating work basket, basket arm, rotation angle 180°, loading platform with side walls, *telescopically extendable to 2.42 m, generator 4 kVA/230 V enables independent power supply in the work basket. Information: TÜV and UVV new

Condition: excellent (used), functionality: fully functional, mileage: 169,619 km, power: 186 kW (252.89 HP), first registration: 02/2015, fuel type: diesel, empty load weight: 7,970 kg, overall weight: 11,990 kg, tire size: 265/70 R 17.5, axle configuration: 4x2, wheelbase: 3,330 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2015, operating hours: 950 h, operation weight: 11,990 kg, Equipment: ABS, air conditioning, cruise control, soot filter, traction control, IVECO EUROCARGO ML 120EL19 – 4X2 – EURO 6 – COMET 15.50 M TELESCOPIC AND ARTICULATED PLATFORM FIRST REGISTRATION 02/17/2015 169,619 KMS CURSOR 5 ENGINE – 186 HP EURO 6 STANDARDS AD BLUE DAY CAB WHEELBASE 3,330 MM MECHANICAL SUSPENSION ABS – EBS – ASR Dksdjyr Dl Tjpfx Af Uei ZF AS-TRONIC 6-SPEED AUTOMATIC TRANSMISSION ENGINE BRAKE CRUISE CONTROL AIR CONDITIONING FLASHING LIGHTS REVERSING CAMERA SUN VISOR ELECTRIC WINDOWS AND MIRRORS CENTRAL LOCKING TELESCOPIC PLATFORM ARTICULATED COMET 151 TAL – HEIGHT 15.50 M CE STANDARDS YEAR 2014 950 HOURS OF USE 4 HYDRAULIC STABILIZERS 2-PERSON BASKET 265 KGS 230 V ELECTRICITY WORKSHOP BOX, LIGHTING, HEATING 265/70 R 17.5 TIRES GVW: 7,970 KGS GVW: 11,990 KGS

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 04/2018, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Dkodpfjx Swwqjx Af Uji Axles producer - SAF axles Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock EBS-braking system, 2S/2M, 2 sensors on 1 axle 1 pair(s) of load lock rails, horizontally, inserted into side walls Disc brakes 430 mm incl. 2 temperature sensor Ventilation flap, at the front wall, at top of left side, Ventilation flap, small, at rear, right si Lift axle control for 1st axle Low noise aluminium floor, suitable for PIEK floor, tested according to CSC/EN 283, reinforced at re Spare wheel holder as fixed basket for one spare wheel, right side, behind axles, 2nd spare wheel ho 1 spare wheel (6+1) tyres - 385/65R22.5 12 sets of double deck rails, type Airline, inserted into side walls, full length 1.600 mm from the Loading capacity 33 / 66 euro paletts Internal Length/width/heigth - 1331cm/246cm/265cm Gross vehicle weight: 39.000 kg Own weight - 8 813 kg 3 axles Pallet box for 24 Euro-pallets

Condition: ready for operation (used), Year of construction: 1998, This WILD door leaf press line was manufactured in 1998. It is designed for door production, handling dimensions from 1,800 to 2,300 mm in length, 500 to 1,300 mm in width, and thicknesses of 35, 40, and 44 mm. The line includes areas for gluing, pressing, and handling door panels with advanced feeding and transfer systems. If you are looking to get high-quality door production capabilities consider the WILD door leaf press line we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits Djdpfx Afoyaqmgo Uoki • Dimensions for door production: lengths: 1800 - 2300 mm • Dimensions for door production: widths: 500 - 1300 mm • Dimensions for door production: thicknesses: 35 / 40 / 44 mm Extra Information Consisting of the following areas: Endless door panel gluing with frame laying station Press line with hard fiberboard loading station First area consists of: Portal feeding Angle transfer with rip and cross cut saw Feeding and supply of longitudinal and cross frame parts from magazines Longitudinal cross-cut station for the longitudinal frame parts Connecting station for the frame parts with the door leaf core, equipped with clamping devices Conveyor belt angle transfer with shuttle transfer of the door leaf cores to the glued hardboard panels Second area consists of: Feeding of the hardboard panels Brush cleaning machine Hardener application machine from below Glue application machine from below Disk roller conveyor Angle transfer for the lower hard fiber board Vacuum turning device for the upper hard fiberboard Automatic loading station for hardboard panels and door leaf cores Two door presses with two x four pressing stations each, set up parallel to each other Both presses are loaded at the infeed with one shuttle loading basket Both presses are unloaded at the outfeed with one shuttle unloading basket Angular transfer to the infeed into a hedgehog buffer Angular transfer at the outlet of the hedgehog buffer and feeding for stacking One-sided vacuum destacking with protective plate placement Note: The technical data and descriptions are transcribed from the original order confirmation. The information is for reference only and is not legally binding.

Condition: used, mileage: 281,486 km, power: 552 kW (750.51 HP), first registration: 06/2019, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 5,100 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 11,200 mm, total width: 2,550 mm, loading space length: 6,500 mm, loading space width: 2,550 mm, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, power assisted steering, seat heater, traction control, = Additional options and equipment = - Electric power steering - Remote central locking - Refrigerator - Leather interior - Alloy wheels - Air suspension - PTO (Power Take-Off) - Radio - Reversing camera - Disc brakes - Sun visor - Differential lock - Spotlights - Auxiliary heater - Toolbox = Notes = Volvo FH 16 750 8x4 Full air suspension. Dynamic steering. HMF 9520 K7 Fly JIB: FJ 2200-K6 Front outrigger. Scanreco radio remote control. Winch. Man basket. 4.40 m – 17,010 kg. 6.10 m – 11,990 kg. 7.90 m – 8,780 kg. 9.80 m – 6,820 kg. 11.80 m – 5,470 kg. 13.90 m – 4,530 kg. 16.00 m – 3,780 kg. 18.10 m – 3,230 kg. FJ2200K6 with additional functions. 21.20 m – 1,705 kg. 22.70 m – 1,545 kg. 24.20 m – 1,410 kg. 25.80 m – 1,295 kg. 27.50 m – 1,195 kg. 29.30 m – 1,115 kg. 31.10 m – 985 kg. Manual extension: 33.00 m – 700 kg. 34.90 m – 400 kg. Loading box: Hydraulic extension: 170 cm. Hydraulic boat support legs. Folding rear bumper. Tool boxes around the truck. = Additional information = Technical details Number of cylinders: 6 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tyre size: 385/65R22.5; Steered; Tyre tread left: 50%; Tyre tread right: 50% Front axle 2: Tyre size: 385/65R22.5; Steered; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 1: Tyre size: 315/70R22.5; Dual tyres; Tyre tread left inside: 50%; left outside: 50%; right inside: 50%; right outside: 50% Rear axle 2: Tyre size: 315/70R22.5; Dual tyres; Tyre tread left inside: 50%; left outside: 50%; right inside: 50%; right outside: 50% Weights Unladen weight: 27,415 kg Payload: 9,585 kg Gross vehicle weight: 37,000 kg Functional Dedpfjyrh Uxox Af Uoki Crane: HMF Interior Upholstery: Leather Maintenance MOT (technical inspection): valid until 06/2026 Financial information Price: On request Identification Type number: FH 16 750 8x4 / HMF 95 tm / JIB = Company information = ALL PRICES ARE NET EXPORT PRICES. Joris Versteijnen (NL-DE-EN) Wouter Greutink (NL-DE-EN-ES-IT) We speak Russian. We make every effort to provide accurate information, but no rights can be derived from the texts provided.

Condition: used, Espec Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design (on castors) 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate Dksdpfxjxugq As Af Uei 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Year of construction: 2007, condition: used, Manufacturer: Pallmann Model: PPSR 10-300 Year: 2007 Type: Contra Selector mill / Fine Impact mill Gentle grinding of dry or wet materials, soft to medium hard. High-throughput cold grinding with fine particle size distribution. Weight : 7000 kg Rotor drive speed: 1590 rpm (110 kW, 380 V, 1500 rpm) Sieve basket speed: 660 rpm (55 kW, 380 volts, 1500 rpm) Dodpfx Afex R D Iyj Uoki Impact rotor diameter: Ø 100 cm Screen width: 30 cm Number of hammers: 60 Pneumatic transfer pickup at machine exit Material : 316L stainless steel Technical documentation available

Condition: good (used), Year of construction: 2016, fuel type: electric, Weights Empty weight: 6.970 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 1.180 cm Dedeymxrwopfx Af Ujki CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 700 m Max swing of platform in degrees: 355 Transport dimensions (LxWxH): 5,36x1,21x2 Additional information Please contact Christian Theißen for more information Manufacturer: Haulotte Model: HA12CJ Year of build: 2016 Condition: Used Data: Max. working height: 11,80 m Platform height: 9,80 m Max. reach: 7,00 m Platform lifting capacity: 250 kg Platform dimensions LxW: 1,15 x 0,81 m Swivel range: 355° Gradeability: 25% Total dimensions LxWxH: 5,36 x 1,21 x 2,00 m Tyres: white tires Ground clearance: 0,04 m Drive type: Batterie Empty weight: 6.970 kg Length of transport position: 3,90 m Height transport position: 2,29 m Special features: Rotating work basket, basket arm/vertical rotation angle +/- 63°/-69°, white tires. Information: sample image

Year of construction: 2024, condition: used, General information Field of application: Freight transport Drivetrain Make of engine: Mitsubishi Weights Empty weight: 3.500 kg Functional Lifting capacity: 4 kg Dodpfx Afoyly Rxo Uski History Number of owners: 1 Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Hydraulic outreach: 2700 cm Remote control: Cable Latest inspection: 2025-02-03 Production country: DE Additional information Please contact Michael Overmeer for more information Böcker HL 27 Agilo Furniture lift mounted on a Mitsubishi Fuso 3515 construction year 12-2024 (first in use 02-2025) with only 62 hours and 2.865 kilometers. The lift is like new and has a capacity of 400 kg and is equipped with a XXL basket, hydraulically operated support legs, remote control and a storage box. Changes and typographical errors reserved.

Condition: used, first registration: 10/2018, empty load weight: 8,780 kg, overall weight: 36,000 kg, tire size: 385/55 R 22.5, axle configuration: 3 axles, color: white, gearing type: mechanical, suspension: air, loading space length: 13,310 mm, loading space width: 2,465 mm, loading space height: 2,700 mm, Equipment: ABS, Carrier refrigeration unit, aluminium floor, container doors, disc brakes, BPW axles, insulated, pallet box, EBS, 3 pairs of side ship lashing rings and 1 pair of spare wheel holders accessible from the rear of the vehicle (double basket as a roller-guided sled) 4 rows of longitudinal perforated rails mounted on the roof, 1 row of horizontally recessed slotted-hole lashing rails Ventilation flap, narrow, on front wall, top left Ventilation flap, narrow, at the rear right, half-height Refrigeration unit Carrier Vector 1550 T LowNoise, diesel/electric Cargo securing certificate according to EN 12642 Code XL *REFURBISHED* Dksdpjw N Szqefx Af Uoi

Condition: excellent (used), mileage: 194,000 km, power: 170 kW (231.14 HP), first registration: 02/2005, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: orange, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: steel, total length: 7,900 mm, total width: 2,500 mm, Year of construction: 2005, Equipment: ABS, air conditioning, power mirror, trailer coupling, = Additional options and accessories = - Leaf spring suspension - Radio/CD player - Rotating beacon - Sun visor flap - Toolbox - Central lubrication system = Notes = Multitel J 328 Alu 28 m 4 stabilizers Rotating basket Max. basket capacity: 280 kg / 3 persons Electric controls in the basket Max. working height: 28 m Powered by a separate Hatz engine New Aboma inspection! Operating hours: 13,896 APK inspection valid until 06.02.2027 194,000 km Dutch registration In very good condition Ready for immediate use. = Further information = Dksdpfoyrftfox Af Uji Axle configuration Suspension: Leaf spring Maximum front axle load: 7,100 kg Maximum rear axle load: 11,500 kg Weights Unladen weight: 17,680 kg Payload: 920 kg Gross vehicle weight: 18,600 kg Functional Working height: 2,800 cm CE marking: yes Condition Technical condition: very good Visual condition: very good Identification Registration number: BP-XS-35 Further information Please contact G. Damen or W. Schischke for more information.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, turning diameter: 140 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 80 rpm, travel distance X-axis: 170 mm, travel distance Z-axis: 200 mm, rotational speed (min.): 80 rpm, total height: 1,730 mm, total length: 2,350 mm, total width: 1,590 mm, quill diameter: 42 mm, type of input current: three-phase, overall weight: 3,300 kg, Equipment: documentation/manual, CNC Lathe BOLEY BE-42 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2002 CNC control: MITSUBISHI Meldas 635LCC Max. turning diameter: 140 [mm] Stroke Z1 axis: 200 [mm] Stroke X1 axis: 170 [mm] Stroke Z2 axis: 395 [mm] Stroke X2 axis: 110 [mm] Stroke Z3 axis: 170 [mm] Stroke X3 axis: 110 [mm] Spindle nose: 48 DIN 6343 Spindle throughbore: 42 [mm] Dkjdpfx Afjyr Iv Ao Uoi Min. spindle speed: 80 [rpm] Max. spindle speed: 8000 [rpm] Increment C-axis: 0.001 [°] Spindle power: 7.5 [kW] Counter spindle throughbore: 42 [mm] Min. counter spindle spindle speed: 60 [rpm] Max. counter spindle speed: 6000 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 2.2 [kW] Type of tool holders: VDI 20 Number of tool stations - Turret 1: 12 Number of tool stations driven - Turret 1: 12 Max. speed driven tools - Turret 1: 4500 [rpm] Number of tool stations - Turret 2: 12 Number of tool stations driven - Turret 2: 12 Max. speed driven tools - Turret 2: 4500 [rpm] Lubrication tank capacity: 210 [l] Total power required: 14 [kVA] Rated current: 20 [A] Supply voltage: 400 [V] RS232 Interface: Yes Dimensions: 2350 x 1590 x 1730 [mm] Weight: 3300 [Kg] INCLUDED EQUIPMENT: x1 LNS HYDROBAR bar feeder x1 coolant tank x6 radial live tool holders VDI 20 x5 axial live tool holders VDI 20 x21 static tool holders VDI 20 x1 parts catcher basket VDI 20 x17 VDI 20 blanking plugs x28 collets x4 collet chucks x1 3-color status light x1 "Electrical diagrams" manual x1 "Operation & Maintenance" manual x1 Operator’s manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Biglia, Index, Tsugami, Miyano, Star, and DMG Mori Tornos lathes, but also milling machines, grinding machines, and CNC.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 29194, mast type: telescopic, fuel type: diesel, color: yellow, General information Mileage: 80.030 km Weights Empty weight: 3.300 kg Functional Lifting capacity: 230 kg Working height: 2.200 cm Make of bodywork: Nissan CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information TÜV Marked: yes Emission level: Stage V / Tier IV final Delivery terms: EXW Max. horizontal reach: 1650 m Transport dimensions (LxWxH): 7x2,2x3,01 Latest inspection: 2025-10-15 Production country: DE Additional information Please contact Vink Machinery for more information Ruthmann TBR 220 * 2015 * Diesel * 80,030 km * 22-meter working height Dsdpfx Ajxqf Edjf Ujki * 16.5-meter horizontal reach * Automatic outrigger * Coming-home * Memory function * Rotating basket * Inspection valid until October 2026 * 3300 kg net weight * Documents included

Condition: excellent (used), color: red, lifting height: 33,000 mm, Year of construction: 2021, operating hours: 1,146 h, General information Field of application: Construction Drivetrain Drive: Wheel Weights Empty weight: 3.475 kg Functional Lifting capacity: 1.500 kg CE mark: yes Dedpexfrh Isfx Af Ujki Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Transport dimensions (LxWxH): 9,2x2,27x2,63 Production country: DE Additional information Please contact Vink Machinery for more information Klaas K23/33 TSR * 2021 * Diesel drive * 1146 working hours * 33-meter hook height * 23-meter horizontal reach * Remote control * Equipped with 2 work lights * 1500 kg lifting capacity * Wheel drive * Prepared for a man basket * Includes documents

Condition: new, functionality: fully functional, Year of construction: 2023, operating hours: 7 h, power: 27.5 kW (37.39 HP), load capacity: 408 kg, mast type: telescopic, lifting height: 19,740 mm, lifting power: 408 kg/m, platform length: 2,300 mm, platform width: 900 mm, overall weight: 13,800 kg, transport length: 7,350 mm, transport width: 2,480 mm, transport height: 3,030 mm, fuel type: diesel, fuel consumption per hour: 6.3 l/h, fuel tank capacity: 76 l, color: red, Equipment: UVV, all wheel drive, === KEY SPECIFICATIONS === Year: 2023 Operating hours: 7 h Working height: 21.74 m Max horizontal outreach: 17.79 m Platform capacity: 408 kg Platform dimensions (L x W): 2300 × 900 mm Platform rotation: Yes (90° left / 90° right) Turret rotation: 360° continuous Boom type: Telescopic Jib: Yes (fixed) Power source: Diesel 4-wheel drive: Yes Stabilisers: No Tyres: Solid cured-on, rough terrain Engine manufacturer: Yanmar 3TNV88C Emission class: Stage V Weight: 13,880 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === Demo unit in excellent condition – fully inspected, maintained and tested by certified professionals. Inspection possible upon request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Dkjdpfx Asxct Tgjf Uji Worldwide delivery available. Price on request (EXW / excl. VAT). The Manitou 220 TJ+ is a robust diesel telescopic boom lift offering a 21.7 m working height and 17.8 m outreach. With a maximum platform capacity of 408 kg, it is perfect for heavy-duty applications in construction and industrial maintenance. Combining power and precision, the 220 TJ+ features 4-wheel drive, solid terrain tyres, and a Stage V Yanmar diesel engine. Its continuous 360° rotation, fixed jib, and large basket (2.3 × 0.9 m) ensure maximum reach and safety. Reliable demo machine from first owner, CE-certified and ready for immediate use. === DELIVERY === Crane loading available on request for smooth handling during dispatch. Flexible shipping options tailored to your destination and logistics preferences. All shipments handled professionally by the Colle Rental & Sales logistics team.