Used Bag Folding Machine for sale (67,975)

Condition: used, Year of construction: 2001, Combi Folding Machine - Fi-55 flat pile feeder with TREMAT separating head - 1st parallel folding station with 4 combi fold pockets - downstream knife shafts - KTL crossfold unit with 2 folding knives - 1 horizontal pocket after the first folding knife - FFP pneumatic window fold pocket Kljdpex R Tluofx Ag Uol - ACC-2.4 control unit (for window fold pocket or gluing device) - noise reduction hood - central control panel DCT-500 - SA-66-K/MP.D shingled stream delivery with press station and marking device, year 2000 - compressor

Condition: good (used), Year of construction: 2013, Operating hours: only 14,500 - Format size – max. 750 x 1050 mm, min. 350 x 400 mm - Net die cutting area: 727 x 1050 mm - Materials: - Paper, min. 80 g/m² - Cardboard & solid board, up to 1400 g/m² - Corrugated board (B-flute) up to 4 mm - Die cutting pressure, max. 300 tons - Speed, max. 7,500 sheets/h - Pile height at feeder: 1000 mm (non-stop) Equipment & features: - Fully automatic die cutting, creasing, and embossing machine - Touch screen control panel - Stripping station for internal waste as well as side and rear edges - Centerline system - Small format device: minimum 300 x 350 mm - Non-stop automatic sheet feeder with pre-piling system - Non-stop standard delivery Kedpjx R Tiaofx Ag Usll - Register system in feeder and die cutting station - Mechanical double sheet detector - Side lays on operating and drive side, switchable between pull and push lay - Four active front lays with sensors for sheet infeed control - Independent fine adjustment of front lays for drive and operator sides - Gripper margin adjustable, 10–18 mm - Delivery section with gripper margin removal - Stripe inserter in the delivery - Centralized and automatic chain lubrication - Two standard stripping frames - Two die cutting chases - Die cutting plate, 5 mm - Screw compressor Varimatrix 105-CS Note: All technical terms and specifications are provided as per industry standards for machinery listings in the printing and packaging sector.

Condition: used, Year of construction: 2008, Folding machine Kledpfsxd U Tkex Ag Usl MBO K 800.2/4 S KTZ Year: 2008 Description: - 16 page folder - MBO Navigator Feeder - Round pile feeder: R 800 Folding unit MBO K 800.2/4 S KTZ - Parallel fold unit with 4 buckle plates - Second cross fold to the left / right - Noise hood over the entire folding section Excluding delivery

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, warranty duration: 12 months, Equipment: CE marking, angle stop, emergency stop, foot remote control, The CIDAN FORMA folding machine offers speedy production, easy ergonomics, strong construction, quick tool changes, and simplicity in programming. Reflecting decades of experience in technology and design, the FORMA sheet metal folder is a “cross-over” capable of handling requirements from small series production to proper subcontracting. Dual drive of the upper beam together with a proven locking solution that holds the clamping creates high clamping pressure resulting in precise folding. Both rails and tools have a quick change and crowning is easily adjusted. The CIDAN FORMA folding machine is equipped with Combi beam as standard and can be equipped with Multifold as an option. Dual motors for the folding beam and upper beam Ksdpfxsmdrq Tj Ag Ujll Same opening height regardless of tooling (Combi beam) Generous space around the tools for increased flexibility Make exact bends with a precise folding radius

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, control type: CNC control, controller model: nuLink, working width: 3,200 mm, type of crowning: manual, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, back gauge: 1,500 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, Demonstration machine FX 3200 x 2.00 mm Kljdpfx Agjwy N Dlj Ujl Manufacturer CIDAN Year of manufacture 2025 Features: CNC control nuLink 21.5-inch touchscreen Rotatable upper beam with 30° straight rail and 125 mm high divided tools Motorized backgauge range 2-1500 mm Manual crowning device integrated into the table On display in our showroom in A-6800 Feldkirch Bending length 3200 Sheet thickness 2.00 at 400 N/mm² Sheet thickness 1.20 700 N/mm² Sheet thickness 3.00 200 N/mm²

Condition: new, functionality: fully functional, Year of construction: 2026, CIDAN PRO folding machine is our most versatile machine yet. From the integrated back gauge, allowing complex parts production from the folding side, to the Combi beam with its high divided tools and straight rail, the CIDAN PRO folding machine takes many of our additional options and makes them standard. With its 100% duty cycle of forming 4 mm at 3100 mm, this fully upgraded metal folder makes it possible to replace two operators with one and still produce accurate parts up to four times faster than with a press brake. -Dual drive of clamping beam gives incredible speed and accuracy. The turbo drive also increases hemming capacity to 50 tons (55US). -Combi beam with high divided tools and straight rail in combination with segmented tools in the lower beam and folding beam can facilitate extremely complicated folding work. -Automatic folding beam crowning and automatic sheet thickness adjustment for precise folding. - With high speed and extreme accuracy of the back gauge, exact measuring is ensured and with turbo driven folding beam you will get the right folding angle every time. - Height adjustable back gauge table a as standard. Ksdpomdqycefx Ag Ujll

Condition: new, Year of construction: 2026, CIDAN FS folding machines are phenomenal combinations of raw strength and flexibility. With powerful motors that fold with fantastic precision and to exact measurements this machine can do a lot more than just bend. Together with the ProLink W or nuLINK control system and frequency control of the machine’s movements you have everything you need for contract manufacturing with high quality and productivity. CIDAN FS folding machines are true workhorsees with a whole lot of benefits. - Crowning adjustment as standard always gives the perfect folding result - Two folding beam rails with width 7/10 mm (0.275″/0.394″) and 20 mm (0.787″) as standard - Fast, reliable, and user-friendly - Choose between three control systems, EasyLink, nuLINK or ProLink W, all with plenty of features Klodpfem Tv Hzox Ag Uel - Multiple backgauge stops for both small and large parts across the bending length of the machine (Click here to read more about our back gauges.)

Condition: new, Year of construction: 2026, FORMA Z folding machine is the most flexible and diverse sheet metal folding machine in our portfolio. Folding both up and down, FORMA Z folding machine eliminates the need to flip material, providing time-efficient folding of complex parts using one operator. The Combi beam rotation between two tooling set ups and the unique geometry gives you unrivalled working space. The automatic tool locking is fast and has features making tool changing very ergonomical. The folding beam has automatic crowning, automatic folding center adjustment and automatic sheet thickness adjustment, which provides superior folding quality in all thicknesses and across the folding length. The large number of vacuum grippers holds the part steadily, anywhere on the back gauge. Large blanks as well as small, one as well as several. The back gauge comes in many designs, which gives you great freedom of choice in how you would like to operate the machine and manage the flow of blanks and parts to/from the machine. Last, but not least – FORMA Z is fast: more production in less time for you! - CNC controlled crowning of folding beam - CNC folder that folds upward and downward, no need to flip the material. - 150 mm movement of folding beam, to move outside of material on folding side. - The Combi beam comes equipped with 203 mm (8”) High Divided Tools and straight rail. - Comes as standard with multifold tooling, CNC controlled sheet thickness and folding center adjustment. Kodpomhhn Ejfx Ag Ujll - The folding beam can be used as front gauge up to 150 mm. - Add vacuum grippers to make work lighter, more precise, and automated!

Condition: new, Year of construction: 2026, CIDAN F folding machine is fast, user-friendly and reliable. The new construction is robust with welded sides, extra strong lower beam and clamping beam. The generous 150 mm opening height and the generous beam openings allow greater flexibility. Klodpfxem Tv D Us Ag Uol The folding beam comes in three different widths, offering the best result for any profile and material, with keyholes for fast changes. The strong but compact folding beam makes the operator’s work easy and the entire process is speeded up as the clamping beam opens before the folding beam is back in place. Choose a CIDAN F folding machine and you choose work of joy and productivity in a perfect combination. - Fast, user-friendly and reliable. - Adjustable crowning for perfect folding results regardless of length and material thickness. - Two folding beam rails as standard, 7/10 mm and 15 mm. - 8–16 gauging rails depending on back gauge type and working length. Click here to read more about our back gauges. - Choose between three different control systems: EasyLink, nuLINK or ProLink W.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Beckhoff, working width: 6,400 mm, warranty duration: 12 months, Equipment: CE marking, cone bending device, emergency stop, Demonstration Machine Double Bender Manufacturer: Thalmann Year of Manufacture: 2022 Kjdpfx Ajwxwpaog Uoll Model: TD 150 / 6.4 m Working Length: 6,400 mm 12 months warranty Features: - CNC graphic control - Automatic rotary slitter - Automatic side sheet loading with 6.4m table - Automatically extendable sheet loading table up to 700 mm - Automatic sheet turning unit - Offset clamping and bending beam - Backgauge range 1,250 mm with separate bending zones and conical function - 6 gripping units - 6 vacuum gripping units - Short part gripping unit - Hardox clamping beams - Crowning unit - Safety area scanner Machine available for inspection in our showroom in A-6800 Feldkirch Other working lengths and models also available

Condition: new, functionality: fully functional, Year of construction: 2026, The CIDAN MEGAPRO folding machine is the strongest member of the product family. The solid and stable construction makes it possible to bend 6 mm steel (5 mm at 4100 mm) or 4 mm stainless steel (3.2 mm at 4100 mm) over the entire working length (at a working length of 3,100 mm). The MEGAPRO has many intelligent functions as standard, such as automatic adjustment of the sheet thickness, automatic adjustment of the bending angle and CNC crowning in the table. It also has a pneumatic tool clamping system. We also offer various backgauge lengths. The most important advantages: - For high speed and precision, the upper and bending beam are equipped with double-driven servomotors. - CNC-controlled sheet thickness adjustment, bending center and crowning. - Optionally pointed or goat foot rail (up to 150 mm) can be used - The upper beam achieves a clamping pressure of up to 60 tons. Performance: 6 mm at 400 N/mm² (5 mm at a working length of 4100) 5 mm at 600 N/mm² (3.2 mm at a working length of 4100) 9 mm at 200 N/mm² (7.5 mm at a working length of 4100) Kljdpjtvl Sgofx Ag Ujl

Condition: new, Year of construction: 2026, nuIT software - welcome to the dream factory! Next level order processing. Fully integrated. Creation of metal trims anywhere. The nuIT software by CIDAN Machinery instantly transforms your sheet metal shop into the most efficient and cutting edge smart factory around. Designed by sheet metal workers for practitioners, our production management platform streamlines all aspects – from order placement and entry, to process control in your shop. Do you want your customers or sales team to order custom/standard flashing, panels, and accessories from the field and submit them directly to production? Do you want instant available data, in real-time, at the office within your production stage? Now it’s possible with nuIT. 4 reasons for nuIT sheet metal fabrication software Networking of various machines and simple creation and transmission of production data Process optimization from the construction site to the work preparation all the way into the production and accounting Automatic creation of various order data, calculations and documents Klsdpepl Uxyjfx Ag Usl Creates auto-generated branded PDF’s. The profile can also be sent directly to the production machine.

Condition: good (used), functionality: fully functional, Bag packaging machine for flat film. The currently installed format is suitable for flat film with a width of 270 mm. The machine comes with two additional smaller formats. Klsdpfx Asx Tawcsg Uol

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 6,400 mm, sheet thickness steel (max.): 2 mm, warranty duration: 12 months, working length: 6,400 mm, Immediately available Thalmann TZ 200 / 6.4 m TZ series single folding machine Working length: 6400 mm 6 machine stands Sheet thickness: 2.00 mm at 400 N/mm² Equipment: VFD (vertical force drive) Continuous control shafts Manual crowning (optionally dynamic) 3D graphical control Backgauge 1250 mm Folding rails 10/10 and 17 mm Kljdpfx Aewlq Naeg Usl Motorized backgauge, range 1250 mm with 6 fingers Electric slitter Automatic crowning and radius adjustment Curved folding beam Hardened tools in clamping and folding beam LED bending illumination M-Guard for remote diagnostics directly from the factory

Condition: new, Year of construction: 2025, The Prod-Masz company has had a good reputation for decades. We voluntarily face the strict and certified quality controls and offer you maximum quality, reliability and satisfaction! Of course we are happy to answer your questions personally and thank you for your interest in our company. Semi-automatic folding bench ZGH-3140 / 1.2mm: -ᐳ semi-automatic bending angle, is set on the encoder and potentiometer -ᐳ The machine works like a semi-automatic machine. After bending, the cheek returns to the starting position and the pressure cheek returns to the set height. It is set to 10 mm. -ᐳ This machine is suitable for series production Klodpfx Agsc Nxvkj Uol the maximum working length 3140 mm the max. Sheet thickness for 1.2 mm (steel) the weight about 1400 kilograms of the hand machine lifting the top beam in three positions Bending beam: 30mm The max. clear width between the bars 100 mm Bending angle: 155 degrees Delivery date: every week L: 3.5m, W: 1.2m, H: 1.5m -ᐳ Adjustable support bars with scale optionally plus 1250 euros We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery).

Condition: new, Year of construction: 2025, Delivery every week - RELIABLE! Are you looking for a folding machine? You expect quality, reliability. You can rely on competent advice and accurate, punctual delivery by the well-established Prod-Masz team. Direct from the manufacturer! Folding machine 2140T/0.8 incl. transport wheels Technical specifications: - maximum working width: 2140 mm - Bending performance: up to 0.8 mm (steel sheet) - Titanium zinc sheet 0.8 mm, aluminum sheet 1.2 mm copper sheet 1.25 mm - Bending angle: max 145 degrees - the cut with the roller shears over the entire working width - Bending beam thickness: 15 mm - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions - Upper beam stroke: 80 mm - degree scale - Weight: about 150 kg - The rotary shears (max. cutting capacity 0.8 mm / steel) + 350 euros - The machine complies with CE guidelines and has a 12-month guarantee. - transport wheels incl. Price: €1,350.00 Short delivery times! Ordered today - delivered next week! We are looking forward to your contact! Kljdpfx Agob Hd Dlj Uel We issue the invoices with 0% (intra-community delivery).

Condition: used, Year of construction: 1997, sheet width 2540 mm plate thickness 3 mm distance between columns 2600 mm Kedex Harmjpfx Ag Ujll min. cut-off length 5 x s mm adjustment of lower beam 80 mm adjustment of upper beam 80 mm daylight opening 350 mm total power requirement 4 kW dimensions 4 x 1 x 1,5 m With accessories and PLC control made by Alba.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, 3800 REVO Vertical Form-Fill-Seal Machine Filling range: 300 - 2,000 g Bag type: Stand-up pouch with central longitudinal seam Wrapping material: heat-sealable paper film Kodox U Txvjpfx Ag Uoll Dosing: via integrated MultiWeigh multihead weigher Output: Approx. 45 bags/min at 300 g Approx. 25 bags/min at 1,000 g Approx. 15 bags/min at 2,000 g Max. mechanical output: 100 cycles/min Features: - Heat sealing system including 1 set of sealing tools - SIEMENS S7-1500 PLC control with 9" color touch screen, including remote maintenance - Wrapping material drive with friction belts, driven by frequency-controlled motors, pneumatically pressed - Main drive with servo motor; cross seal jaw opening width adjustable - All drives directly flange-mounted - Registration mark reader for printed film - Deflection roller drive - Bag length control unit for precise bag length management with unprinted wrapping material - Automatic web edge control - Film clamping and splicing station - Vacuum-assisted film feed - Stainless steel film cover - Seal seam detection using ultrasonic sensor - Bottom seal cooling/bottom seam folding - Mechanical air compression bars - Forming and vibrating chute apparatus - Bottom flap for forming and vibrating chute - Integrated side gusseting device - Size parts - Discharge conveyor - Thermal transfer printer including bracket Working range: Bag width 80 - 380 mm (for flat bag production) Max. bag length: 550 mm Dosing: Combination weigher MultiWeigh MW XV 10-2.0 Weighing range: 250 – 3,000 g Dosing hopper volume: 2,000 cc Weighing hopper volume: 2,000 cc Total weighing volume max.: 6,000 cc Features: - 1,200 liter product hopper - Z-elevator for product feeding - Central feed hopper - Product retention system, ring gate - Collection bin 250 mm - Reject gate for incorrect weights - Format tube with funnel attachment for manual filling - Deposit table for manual box filling - Discharge conveyor (box dimension) - Walk-on platform for MultiWeigh scale Professionally dismantled and stored; inspection can be arranged at short notice.

Condition: new, neu Klsdpswirrqofx Ag Uel ca. 10 Wochen ab Auftrags Türkei 63900 € 1207.71 € 4200 mm 1.5 mm 1 mm 2 mm Motorisch 5450 mm 2200 mm 1900 mm 5350 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 53600 € 1013.04 € 2050 mm 3 mm 2 mm 4 mm Motorisch 3350 mm 2200 mm 1900 mm 3800 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage Klodpfx Ajwiq E Nog Ujl - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: new, neu Kedpfjwiq A Uex Ag Usll ca. 10 Wochen ab Auftrags Türkei 55300 € 1045.17 € 2550 mm 2.5 mm 1.5 mm 3.5 mm Motorisch 3830 mm 2200 mm 1900 mm 4050 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 57100 € 1079.19 € 3200 mm 2 mm 1.2 mm 3 mm Motorisch 4450 mm 2200 mm 1900 mm 4500 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Kedpjwiq A Iefx Ag Usll Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: new, Year of construction: 2026, The best-selling and reliable PROD-MASZ press brake! Fast delivery time and high quality! Bending machine from the only, genuine and reliable manufacturer PROD MASZ® Technical specifications: - maximum working width: 2140 mm - Bending performance: up to 0.8 mm (steel sheet) - Bending angle: max 145 degrees - the cut with the roller shears over the entire working width - Bending beam thickness: 15 mm - lifting of the upper beam in three positions - Upper beam stroke: 80 mm degree scale angle stop rear rack for holding the sheet metal front depth stops - Weight: about 180 kg The roller scissors (max. cutting capacity 0.8 mm / steel) Ksdob Eg Hyepfx Ag Uell The machine complies with CE guidelines and has a 12-month guarantee. Price: € 1.050.00 Roller scissors 0.8mm - plus 350 euros Manual folding machine plus 75 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: good (used), Year of construction: 1989, Bending machine, folding machine, swivel bending machine, die bending machine -Manufacturer: zts, folding machine type XONM.2000/2A-4 -Drive: hydraulic -Max. working width: 2000 mm -Max. sheet thickness: 2 mm Ksdpfomiqm Ijx Ag Ujll -Connected load: 2.2 kW -Dimensions: Bending machine 2850/1100/H1400 mm / Unit 720/540/H760 mm -Total weight: 2160 kg

Condition: excellent (used), functionality: fully functional, Very nice creasing/folder machine for sale. Brand: Morgana (Nagel), model Digifold with 9 programs, max size 630 x 330 mm. Total counter: 77,895. Of course, you are welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or container. Ask for a price including transport (location: Netherlands). Regards, Henk Hoos. Klsdpfxjx Iukyo Ag Uol