Used Austria for sale (665)

Condition: reconditioned (used), Currently, two identical machines are still available. Mechanically redesigned machine with new LTG StoreControl L control system. External dimensions: Height 5,200 mm (adjustment possible for an additional charge) Width 1,600 mm Depth 2,800 mm 38 beams, each with a payload of 250 kg with clear usable dimensions: Gsdpfxsd Hxpvs Af Tsip W = 1,300 mm D = 825 mm H from 55 to 750 mm Total machine load capacity up to 2 x 10,000 kg Start of the access opening at 875 mm above the top floor, then 875 mm high Color: GRAY/BLUE, beams are sendzimier-galvanized, surfaces cleaned, signs of wear may occur. Performance data: Vertical drive 1 x 3.5 kW / 400 Volt Horizontal drive 1 x 0.75 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently primarily in Germany, Austria, and several neighboring countries.

Condition: reconditioned (used), Modernized machine with new LTG StoreControl P control system External dimensions: Height 5000 mm Width 2650 mm Depth 1250 mm plus 300 mm storage table 34 carriers with a payload of 140 kg each Gijdpfx Aednfdljf Top with clear usable dimensions: H = 220 mm W = 2220 mm D = 410 mm Chain pitch 254 mm Storage table at 1000 mm above floor level with wooden worktop Color: GRAY, surfaces cleaned, signs of wear may occur Motor power: 1 x 1.8 kW / 400 volts Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: reconditioned (used), Modernized machine with new LTG StoreControl L control system Currently 6 identical machines available External dimensions: Height 4889 mm Width 2785 mm Depth 2810 mm Total machine load capacity up to 2 x 15,000 kg 63 beams with center bar for up to 400 kg load each In the clear usable dimensions: W = 2460 mm D = 825 mm Usable height up to 55 to 750 mm Start of the service opening 875 mm above the top floor, then 875 mm high Motor ratings Vertical drive 6 kW / 400 volts Horizontal drive 0.55 kW / 400 volts Color: gray/blue Gijdped Sphijfx Af Top Surface cleaned, signs of wear possible Subject to change Errors and technical changes or deviations in details in photos, delivery, and assembly currently mainly in Germany, Austria, and several neighboring countries

Condition: used, mileage: 29,800 km, power: 115 kW (156.36 HP), fuel type: gasoline, gearing type: mechanical, first registration: 07/1981, next inspection (TÜV): 09/2027, color: red, number of seats: 2, Equipment: all wheel drive, Original early fire service G-wagon, second owner, never previously used for civilian purposes. Passed TÜV and classic car inspection (H-Gutachten as per §23 StVZO) in September 2025. Vehicle inspection (HU) valid until 09/2027 (DEKRA passed “without defects”). Year of manufacture: 1981 / First registration: 07/1981. Original mileage only 29,800 km over more than 44 years of fire service duty. Advance Rescue Vehicle (VRW) with ZIEGLER bodywork and Knurz-Kirsch generator, rated at 5 kVA. German specification vehicle, with original registration papers (only 2 registered owners to date), continuously registered and in use or kept in the garage until 10/2025. The manufacturer listed in the original paperwork is still GFG "Geländefahrzeug-Gesellschaft"—a joint venture by Daimler-Benz and Steyr-Daimler-Puch in Austria at the time. This vehicle is among the last produced with this manufacturer designation, as shortly afterward “Daimler-Benz” became the registered manufacturer in the documents. As recorded in 1991, a complete MATTER roll bar was installed and remains in place. Includes a small roof rack system for transporting long equipment items. The long-wheelbase 280 GE is the largest and most powerful vehicle from the first G-Class generation available as a factory-standard Mercedes model in its early years. The six-cylinder M110 petrol engine with 2,717 cc displacement produces 115 kW/156 hp and runs well. 4-speed manual transmission with differential locks. Power steering. 155 km/h is entered as the maximum speed. A PTO for operating the generator is also fitted. Gjdsxthdzopfx Af Teip The vehicle was most recently used mainly to transport a portable pump (TS) with suction hoses and accessories. Therefore, there are no rear seats and a load area is provided. Apart from the 2 front seats, no additional seats are installed. According to original papers, it is classified as a "3-seater" and the registration type is “Other Vehicle, Fire Service, Advance Rescue Vehicle (VRW).” Unladen weight: 2,360 kg. The original gross vehicle weight rating (GVWR) of 2,900 kg was increased in 1991 and now stands at 3,030 kg. This results in a current payload capacity of 670 kg for the 280 GE. Dimensions: Length 4,395 mm / Width 1,700 mm / Height 2,150 mm. Tyres: 205/80R16. Fitted with quality winter tyres meeting current legal requirements (snowflake symbol, DOT 2018). While the G does not feature a trailer hitch, the base cross-member required is installed. Retrofitting data or trailer load specification is not possible as the relevant fields are marked “not applicable” in the original registration document. This offer is valid for commercial customers, freelancers, public authorities, emergency services, agricultural and forestry operations, and similar self-employed professionals only. Sale to private end customers is unfortunately not possible. Subject to prior sale and errors. The 280 GE is immediately available and ready for registration. It was recently driven a considerable distance by motorway to our premises, which it completed without issue. According to verbal information, the Mercedes is accident-free, but this cannot be documented in writing and is therefore passed on to the buyer as hearsay. The 280 GE was rightly classified as a classic vehicle and officially recognised in Germany as an "automotive cultural asset."

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, operating hours: 9,495 h, load capacity: 6,000 kg, lifting height: 4,000 mm, free lift: 325 mm, fuel type: diesel, construction height: 2,900 mm, motor manufacturer: Perkins, Equipment: cabin, lighting, Diesel Sideloader JUMBO J/SHP60/15/40 Year of manufacture: 2004 According to hour meter: 9,495 hours Perkins engine 6 ton lifting capacity 4 metre lift height 2.90 metre overall height 1.50 metre fork length Gjdpfx Aoyk Tc Ssf Teip - Full cab with heating and radio - Lighting system - Immediately operational! - MADE IN AUSTRIA! Sale price: €13,500 net Low-cost delivery available!

Condition: used, mileage: 324,012 km, power: 397 kW (539.77 HP), first registration: 03/2014, fuel type: diesel, axle configuration: 6x6, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, suspension: parabolic leaf (spring), Year of construction: 2014, Equipment: air conditioning, crane, differential lock, power mirror, retarder, trailer coupling, = Further Options and Equipment = - AP axle - Work lights - Heated exterior mirrors - Roof light bar - Air-suspended driver's seat - Hydraulic system - No spoilers - Air conditioning with automatic temperature control - Coolbox - PTO (power take-off) on gearbox - Radio CD MP3 Bluetooth - Beacon light - Reversing camera - Heavy-duty bumper - Sun visor - Toolbox - tool chest = Remarks = MAN TGS 33.540 6X6 BB all-wheel drive - with Meiller rock tipper and Fassi F235 incl. jib New tyres on 2nd and 3rd axles New technical inspection Suspension type: leaf/leaf Drum brakes Wheelbase 3900+1400 mm Engine D2676LF06 - 540 HP / 397 kW EURO5 Gearbox ZF 12 AS 2531 OD MAN TipMatic Transfer case G172 ZF intarder Radio MAN Media Truck Advanced Hands-free functionality for mobile phone; multifunction steering wheel and Bluetooth-enabled High-roof driver's cab "LX" Air conditioning Coolbox Air-suspended comfort driver seat with lumbar support, shoulder adjustment and heating Armrests for driver's seat Cruise control Cab tilting device, hydraulic/electric CB radio antenna on cab roof Sun blind for windscreen Heated and electrically adjustable mirrors, wide-angle mirror Differential lock on front axle Differential lock on rear axle AP axle ratio i = 4.00 Trailer hitch ROCKINGER 500 G 6 Trailer socket 24V 7+7-pin at chassis end Trailer socket for ABS at chassis end Beacon lights Work lights Roof spotlights incl. mounting bar Sun visor Meiller Rock Tipper Side wall operation system (Bordmatik) Aluminium mudguards Hydraulic tailgate Crane: Fassi F235 Incl. Jib Remote control Incl. Grab Crane at rear Removable crane Contact persons / contact: Mr. Thomas Pletz (German, English) p: @:thomas. Giodpfxjyrfb Ao Af Top Mrs. Daniela RUDOLF (Spanish, Italian, English) p: / @:daniela. Vehicle location: Volvo Group Austria GmbH A-8141 Premstätten Rudolf-Diesel-Straße 13 Austria All information is without guarantee; changes, errors, and prior sale reserved. = Further Information = General Information Cab: high roof Technical Information Engine displacement: 12,000 cc Gearbox Gearbox: Automatic Axle Configuration Suspension: parabolic springs Front axle: tyre tread left: 9 mm; tyre tread right: 9 mm Rear axle 1: twin tyres; inner left tyre tread: 20 mm; outer left: 20 mm; inner right: 20 mm; outer right: 20 mm; reduction: outer planetary axles Rear axle 2: twin tyres; inner left tyre tread: 20 mm; outer left: 20 mm; inner right: 20 mm; outer right: 20 mm; reduction: outer planetary axles Functional Crane: Fassi F235 + jib Body manufacturer: Meiller Additional Information Chassis height: extra high Axle specification: not specified Crane other: removable crane, radio remote control, rotator Further information Please contact Thomas Pletz for more details.

Condition: used, mileage: 483,946 km, power: 330 kW (448.67 HP), first registration: 12/2020, fuel type: diesel, maximum load weight: 15,260 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, brakes: retarder, color: other, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: air, loading space volume: 53 m³, loading space length: 7,700 mm, loading space width: 2,480 mm, loading space height: 2,800 mm, Year of construction: 2020, Equipment: air conditioning, cruise control, navigation system, onboard computer, tail-lift, trailer coupling, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is specified, it is based on the current daily exchange rate. The currency applicable is that of the vehicle's location. Engine: OM471, R6, 12.8 l, 330 kW (449 hp), 2200 Nm, High Performance Engine Brake, axle configuration 6x2 ENA, Predictive Powertrain Control, trailing axle, 7.5 t, relievable, liftable, secondary water retarder, trailer brake, 2-line system, 630 l aluminum tank, L-cab, L-cab, cab width 2.50 m, BigSpace, adjustable air deflector, external sun visor, transparent, roll stability assist, comfort bed, upper, wide, levelable, comfort bed, lower, multimedia interactive cockpit, refrigerator in drawer under the bed, electric stationary air-conditioning, automatic climate control, comfort driver's suspension seat, hill start assist, bi-xenon headlights, lane keeping assist, distance assist, attention assist, traffic sign recognition, blind spot assist, driver airbag, cruise control, navigation system, tail lift D-Hollandia DHSMV.20, 2,000 kg, 650 mm steel platform + 845 mm aluminum platform, total: 1,495 mm, SDG multi-changeable frame - chassis ride height: 1,085 mm - drop-off height: 1,265 mm - drop-off height: 1,265 mm. "MAX" swap body with hydraulic roof (extra height) available at additional cost! Godpfx Aexmwctjf Tjip

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller model: HypCut, laser type: fiber laser, laser source manufacturer: MaxPhotonic, laser power: 20,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 80 mm, sheet thickness stainless steel (max.): 100 mm, sheet thickness aluminum (max.): 60 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 12 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, input current: 110 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 20 bar, overall weight: 9,500 kg, warranty duration: 12 months, door opening width: 1,000 mm, door opening height: 2,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, New Laser Cutting Machine with 20 kW Fiber Laser Our goal is to offer highly precise, long-term stable, and yet cost-effective laser machines. Our machines are ideal for workshops and repair businesses. The delivery includes a perfectly developed cutting parameter library as well as first-class service. Please also check out our attractive leasing/leasing-purchase offers. - Machine with automatic nozzle changer (optional) and automatic nozzle centering (optional) - Machine with automatic shuttle table - Machine bed lined with graphite plates - Machine measured and calibrated with Renishaw system (including measurement protocol) - Space-saving design - Extremely energy-efficient cutting system - Requires only approx. 9.5 x 3.5 meters of installation space - 20 kW MaxPhotonics laser source (G5 / German specification) The following options are also available: - Automatic nozzle changer (optional) - Automatic nozzle centering (optional) - Vision control (placement and nesting via camera system) - Top quality – schedule a viewing today! Cutting capacities: - Steel sheet up to 80 mm - Stainless steel sheet up to 100 mm - Aluminum sheet up to 60 mm Gedpfxsyhhnke Af Tjip - Travel: 1500 x 3000 mm - Machine control in German language - Safety light curtains for maximum operator protection - Extensive collision protection measures for the cutting head - Large laser safety windows on three sides for optimal monitoring of the cutting process - Automatic, programmable 3-gas switching (compressed air, nitrogen, oxygen) - Comprehensive cutting parameter database - Incl. nesting module - Very user-friendly operation - High-performance laser chiller - Machine control in German - Comprehensive service and warranty package - High-performance laser chiller - Optional filter extraction system Sale exclusively to commercial customers. Delivery / consultation / sales only within Germany / Austria / Switzerland Machine dimensions approx.: Length: 8.5 m Height: 2.3 m Width: 3.5 m Total weight: approx. 9500 kg Need a different laser power, table shape, or table size? No problem. I am happy to prepare a suitable offer. E.g. 2 kW machine from €29,990 or 6 kW machine from €79,900 Not sure which laser power is right for your application? Just give us a call! Of course, I can perform cutting trials according to your requirements – many solutions are possible.

Condition: repair required (used), Year of construction: 1996, functionality: fully functional, input voltage: 415 V, overall weight: 2,960 kg, power: 5.5 kW (7.48 HP), Lisec spacer bar bending maching BSV-45A, year 1996/2007, needs small repairs but is fully functional modified by Lisec in year 2007 to bend additionally stainless steel profiles (Nirotech, Chromatech Plus), electronic clamping pressure regulator for different material thicknesses. Last company was also bending TGI by using standard aluminium tools..... Machine is coming with bending tool for 16 mm aluminium Gisdpfertpuzsx Af Tsp Minimum frame size: 250 x 80 mm Maximum frame size: 4000 x 2200 mm (split frame) Profile widths: 6-24 mm Running direction: left/right Power supply: 3/N/PE-50Hz-415V, 24VDC control voltage Shapes: according Lisec shape catalogue, including arc shapes (for aluminium only) 4-slot spacer bar magazin PM-45/4 Machine is complete and was in full operation unit dismantling During transportation small damages happend..... Can be seen in our warehouse in Hofkirchen/Austria on appointment

Condition: used, maximum load weight: 32,254 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2023, next inspection (TÜV): 01/2027, loading space length: 13,200 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, Year of construction: 2023, Equipment: ABS, SCHMITZ-CARGOBULL SCB S3T ? HUB ROOF ? LIFT AXLE ? GOOD TYRES ? ----VEHICLE HISTORY TRAILER DATA - SCHMITZ FLATBED/CURTAIN SIDE TRAILER - TYPE: SCB S3 - FLATBED/CURTAIN SIDE WITH SIDE BOARDS - HYDRAULIC ROOF (LIFTING ROOF) CHASSIS & BRAKES - DISC BRAKES - SCHMITZ AXLES - LIFT AXLE - AIR SUSPENSION BODY & EQUIPMENT - SIDE BOARDS - SLIDING CURTAIN - EDGE COVER - TOOLBOX - SPARE TYRE Giedpfx Afoyg Tw Ue Tsp - GALVANISED FRAME TYRES - TYRE SIZE: 385/55 R22.5 DIMENSIONS - LENGTH: 13.20 M - WIDTH: 2.48 M - HEIGHT: 2.70 M WEIGHTS (AS PER VEHICLE REGISTRATION) - GROSS VEHICLE WEIGHT: 39,000 KG - UNLADEN WEIGHT: 6,746 KG - PAYLOAD: 32,254 KG ----EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ----EXPORT DECLARATION, CUSTOMS EXW IN 10 MINUTES (APPROVED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATE AND 17 - 21 DAYS AUSTRIA LICENSE PLATE EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 will be required. Subject to change, errors, and prior sale! You can find more vehicles on our homepage: Sale exclusively according to our GTC – see homepage Important Notice – Important Information: Despite careful checking of all details in our offer, errors may occur. Some may be caused by transfer errors in the systems of various platform providers. Therefore, please note that all information is supplied without guarantee and does not represent a legal claim. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is for information and contract initiation purposes only. The details provided are without guarantee and do not represent assured properties.

Condition: new, Year of construction: 2026, Heating capacity / nominal heat output: 21 kW For rooms up to approx. 300 to 500 m³ (according to DIN 4108) Flue pipe outlet: rear side (standard) Flue pipe: Ø 180 mm Filling volume: 80 ltr Required chimney draft min. 12 Pa Mass of the filling opening (L x W) 300 x 340 mm Weight: 375 kg Gedpfxohvibzj Af Teip Efficiency 88,2 Energy efficiency class: A+ EWI-A 15G space heaters are type-tested according to DIN EN 13240, according to 15a B-VG (Austria) and LRV (Switzerland). They comply with the limit values of the 1st BImSchV. (Federal Immission Control Ordinance)

Condition: new, Year of construction: 2026, Heat output / nominal heat output: 17.8 kW For rooms up to approx. 300 - 400 m³ (according to DIN 4108) Gisdpfx Afedlmnno Tep Filling volume: 78 ltr Mass of the filling opening: Ø 215 mm Flue outlet: rear side (standard) Flue pipe Ø 180 mm Required chimney draught min. 13 Pa Weight: 250 kg Efficiency: 79,02 Energy efficiency class: A The room heaters GRA-N are type-tested according to DIN EN 13240, according to 15a B-VG (Austria) and LRV (Switzerland). They comply with the 1st BImSchV (Federal Immission Control Ordinance) stage 2.

Condition: new, Year of construction: 2026, Heat output / nominal heat output: 16.5 kW For rooms up to approx. 300 to 400 m³ (according to DIN 4108) Flue pipe outlet: rear side (standard) Flue pipe: Ø 180 mm Filling chamber volume: 80 ltr Required chimney draught min. 12 Pa Dimensions of the filling opening (L x W) 300 x 340 mm Godpfxjdlmn Hs Af Teip Weight: 370 kg Efficiency 85,88 Energy efficiency class: A+ The EWI-A 15 space heaters are type-tested according to DIN EN 13240, according to 15a B-VG (Austria) and LRV (Switzerland). They comply with the 1st BImSchV (Federal Immission Control Ordinance) stage 2.

Condition: good (used), Emco Compact 10 Lathe Made in Austria. The machine is in perfect condition, practically unused. The machine comes from a maintenance workshop at a printing house. It has not been used in production. Gedeyl Rz Uopfx Af Toip Accessories are included.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 3,500 kg, door opening width: 3,000 mm, door opening height: 600 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 6kW fiber laser Delivery time: approx. 6-8 weeks Our commitment is to provide highly precise, long-term stable, yet cost-effective laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameters library is included in the delivery, as well as first-class service. Please also consider our attractive leasing/loan purchase offers. - Machine without automatic shuttle table! Loading takes place on the long side of the machine - Very space-saving - Extremely energy-efficient cutting system - Requires only approx. 4 x 4.5 meters of floor space - 6kW laser source from MaxPhotonics (G5/German configuration) - Laser generator with wall-plug efficiency exceeding 30% - Suitable for aluminum - Top quality – book your inspection now! Cutting capacity: - Steel sheet up to 30 mm (maximum) Gsdpfxexw T Nko Af Toip - Stainless steel sheet up to 15 mm (maximum) - Aluminum sheet up to 12 mm (maximum) - Brass sheet up to 8 mm (maximum) - Travel range: 1500 x 3000 mm (for large format) - Machine control system in German - Safety light curtain for maximum operator protection - Extensive collision protection measures for the cutting head - Large laser safety windows for process observation - Comprehensive cutting parameter library - Incl. nesting module - Very easy to operate - Powerful laser chiller - Machine control system in German - German service and spare parts supply - Powerful laser chiller - Exhaust filter system optionally available (5.5kW with frequency converter for pleasantly quiet operation) Leasing or hire purchase possible through our financing partner. Sale only to commercial customers. Delivery / consulting / sales only within Germany, Austria, and Switzerland. Machine dimensions approx.: Length: 4.0 m Height: 2.3 m Width: 4.5 m Total weight: approx. 4500 kg Need different laser power, table design, or table size? No problem. I would be happy to make you a suitable offer. For example, 2kW machine from 29,990 euro Not sure which laser power suits your application? Of course, I can perform cutting trials according to your requirements. Much is possible here.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, table width: 1,300 mm, travel distance X-axis: 2,550 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 3,500 kg, door opening width: 2,600 mm, door opening height: 1,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, new laser cutting machine with 3kW fiber laser Our goal is to offer high-precision, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included, as is first-class service. Please also take note of our attractive leasing and hire-purchase offers. - Machine without automatic shuttle table - Very space-saving design - Extremely energy-efficient cutting system - Only about 4 x 4 meters installation area required - 3kW laser source from MaxPhotonics (G5/German configuration) – suitable for aluminum - Top quality, schedule a viewing now! Cutting capacities: - Mild steel up to 22mm - Stainless steel up to 12mm - Aluminum up to 12mm - Brass up to 5mm - Travel range: 1260 x 2550mm (suitable for medium-size sheets) - Machine control interface in German - Safety light curtain for maximum operator protection - Extensive collision protection for the cutting head - Large laser protection window for process observation - 3-gas selection (compressed air, nitrogen, oxygen) - Extensive cutting parameters library - Including nesting module - Very easy to operate - Powerful laser chiller - German service and spare parts availability - Extraction/filter system optionally available (5.5kW with frequency converter for exceptionally quiet operation) Leasing and hire-purchase available via our financing partner Sale exclusively to commercial customers. Delivery / consulting / sales only in Germany / Austria / Switzerland. Machine dimensions approx.: Length: 4.0m Gjdpfxexa Ahns Af Teip Height: 2.3m Width: 4.0m Total weight: approx. 3500kg Need different laser power, table configuration, or table size? No problem. I am happy to prepare a tailored offer. Example: 2kW machine from €29,990 Not sure which laser power is right for your application? Of course, I can perform cutting trials according to your requirements. There is a wide range of possibilities.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 1,500 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 2,800 kg, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Laser Cutting Machine with 1500 W Fiber Laser Ecoline Our commitment is to offer highly precise, long-term stable, yet affordable laser machines. Our machines are ideal for workshops and repair businesses. Included in delivery is a perfectly optimized cutting parameter library as well as first-class service support. Please also take note of our attractive leasing and hire-purchase offers. Cost-effective Entry Into Laser Cutting Technology - High-quality MaxPhotonics laser source - Extremely energy-efficient cutting system - Requires only approximately 3.0 x 3.0 meters of installation space - Top quality – schedule a viewing now! Cutting capacity: - Mild steel sheet up to 15mm - Stainless steel sheet up to 5mm - Aluminum sheet up to 5mm - Travel range: approx. 1300 x 1300mm - Support table size: approx. 1300 x 2500mm (allows for full mid-format sheet loading) - Machine control in German - Manual front door - Comprehensive collision protection measures - Large front viewing window for monitoring the cutting process - Automatic, programmable dual-gas switching (compressed air/nitrogen, oxygen) - Extensive cutting parameter database - Incl. nesting module - CypCut1000 cutting software - Raytools 240 cutting head - Very easy to operate Gsdpjitu Srjfx Af Teip - Powerful laser chiller Sale exclusively to commercial customers. Delivery / consulting / sales only within Germany / Austria / Switzerland. Machine dimensions (approx.): Width: 3.2 m Height: 2.3 m Length: 3.3 m Total weight: approx. 2,800 kg Need a different laser power, table design, or table size? No problem. I am happy to provide a customized quotation. Not sure which laser power is suitable for your application? We are happy to conduct test cuts based on your requirements. Wide range available – from 0.5 kW up to 20 kW laser power.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 10 h, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 5 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, For sale is a high-precision laser cutting machine with 3,000-watt laser power: Type: LG-1313/3kW HaiCut Premium Line - Fully equipped - Innovative 3-gas switching (pressure and gas type can be controlled via software) Cut with N2, O2, mixed gas (compressed air) - Automatic front door - Machine bed lined with fireclay - Machine bed and axes measured and calibrated using Renishaw interferometer Our goal is to offer the best, most reliable, and competitively priced laser machines currently available on the market. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included as well as top-tier on-site service. Please also note our attractive leasing/financing options. Brand new machine, delivery time approx. 6-8 weeks We would be happy to demonstrate the machine to you at our facility. Travel range: approx. 1300 x 1300 mm Table area: approx. 2500 x 1300 mm (plenty of space for medium-format sheets) Pull-out cutting table For high-precision metal cutting Fully installed and calibrated Cutting software in German Giedpfxoi Igaus Af Tsp Incl. nesting module Very easy to operate Just switch on and start cutting Laser source by Max Photonics (G5/German version) with 3,000 watts power Comprehensive electronic and mechanical collision protection measures for the cutting head Large laser safety window in the front door Automatic front door Safety light curtain for maximum operator protection Cutting capacity: - Stainless steel up to 12 mm - Mild steel up to 22 mm - Aluminum up to 12 mm - Brass up to 5 mm Heavy-duty industrial quality Complete system / ready for immediate use LED work area lighting 200 mm duct connection for fume extraction Incl. exhaust fan Leasing or hire purchase available via our financing partner. Need different power or table size? No problem, we have multiple machines in stock or available at short notice. Sale to commercial customers only. Delivery/advice/sales exclusively in Germany, Austria, or Switzerland. Machine dimensions approx.: Width: 3.5 m, Height: 2.1 m, Depth: 3.5 m Weight: approx. 2.5 tons

Condition: new, Year of construction: 2025, functionality: fully functional, shaft length: 10,700 mm, laser power: 30 W, Laser Engraving Machine with 30 Watt Laser Power - 30 Watt CO2 Metal Tube Laser Source Demonstration unit, with minimal operating hours - includes Windows 10 Pro 64-bit PC system - includes 22" monitor - fully installed and calibrated - Engraving software in German - Very easy to operate - Switch on and start immediately - 30 Watt CO2 laser source for high-contrast and fast marking with extremely high resolution - Capable of deep engraving - Wobble function - Suitable for engraving on, e. g., wood, plastic, anodized surfaces, etc. - Heavy-duty industrial quality - Complete system / ready for immediate use - Working area approx. 500 x 600 x 600 mm (W x D x H) - Clamping table with mounting threads in 50 mm grid - LED work area lighting - 50 mm connection for fume extraction - Engraving area approx. 180 x 180 mm - Expandable up to approx. 300 x 300 mm - Includes foot switch to start the engraving process Please also check our attractive leasing/financing offers. Gedpjirmgmofx Af Tjip Sale exclusively to commercial customers. Delivery / consulting / sales only within Germany / Austria / Switzerland Machine dimensions approx.: Width: 800 mm Height: 1800 mm Depth: 1000 mm Weight: approx. 150 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 15 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 2,500 kg, door opening width: 1,000 mm, door opening height: 1,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 6kW fiber laser Our aim is to offer highly precise, long-term stable, and yet attractively priced laser machines. Our machines are ideal for workshops and repair businesses. A fully developed cutting parameter library is included with every machine, as well as first-class service. We also offer attractive leasing and hire purchase options. - Machine with automatic shuttle table - Very space-saving design - Extremely energy-efficient cutting system - Only approx. 9 x 3.5 meters installation footprint - 6kW laser source from MaxPhotonics (G5 / German version) - Top quality – schedule a viewing now! Godpshncfcsfx Af Toip Cutting capability: - Steel sheet up to 25mm (max. 30mm) - Stainless steel sheet up to 15mm - Aluminum sheet up to 15mm - Brass sheet up to 12mm - Travel range: 1500 x 3000mm - Machine control system in German - Safety light curtain for maximum operator protection - Comprehensive collision protection measures for the cutting head - Large laser-protection windows on three sides for monitoring the cutting process - Automatic, programmable 3-gas switching (compressed air, nitrogen, oxygen) - Extensive cutting parameter file included - Includes nesting module - Very user-friendly operation - High-performance laser chiller - Machine control system in German - German service and spare parts support - High-performance laser chiller - Optional fume extraction system Leasing or hire purchase is available through our financing partner. Sale to commercial customers only. Delivery / Consultation / Sale only within Germany / Austria / Switzerland Machine dimensions approx.: Length: 9.0m Height: 2.3m Width: 3.5m Total weight: approx. 6500kg Need a different laser power, different table style, or table size? No problem. I would be happy to create a suitable quote for you. For example: 1kW machine from €29,990 or 3kW machine from €32,900 Not sure which laser power suits your application? Naturally, I can carry out cutting trials based on your requirements. Many options are available.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, laser power: 20 W, UV Laser Engraving Machine with 20 Watt Laser Power - Laser source with 355nm wavelength / 20 Watts Demonstration machine, with minimal operating hours (approx. 15 hours) - incl. Windows 64-bit PC system - incl. 22" monitor - everything fully installed and calibrated - Engraving software in German - 3D software (MM3D) - very easy to operate - switch on and start working - UV laser source with 20 Watts for high-contrast and fast marking with extremely high resolution - suitable for engraving almost all metals (stainless steel, brass, aluminium, etc.) - suitable for engraving almost all plastics (including PVC, silicone, etc.) - suitable for engraving real glass (including crystal glass) - capable of cutting real glass Gsdpfx Afsflrnae Tjip - heavy-duty industrial quality - complete system / ready for immediate use - working area approx. 500 x 600 x 600 mm (W x D x H) - clamping surface with threaded inserts on a 50 mm grid - LED workspace lighting - 50 mm duct connection for fume extraction - Engraving area approx. 150x150 / 200x200 / 300x300 mm (switchable) - 3D scanner for marking surfaces of any shape - incl. foot pedal to start the engraving process Sale to businesses only. Delivery / consulting / sales only within Germany / Austria / Switzerland. Please also ask about our attractive leasing/financing options. Machine dimensions approx.: Width: 800 mm Height: 1800 mm Depth: 1000 mm Weight: approx. 150 kg

Condition: new, Year of construction: 2025, shaft length: 1,070 mm, laser power: 60 W, type of cooling: air, Laser Engraving Machine with 60 Watt Laser Power New demonstration unit - 60 Watt MOPA laser (enables color laser engraving on stainless steel) - Incl. 4th axis (rotary unit) - Incl. Windows 10 Pro 64-bit PC system - Incl. 22" monitor - All software and hardware pre-installed and calibrated - Engraving software in German - Very user-friendly operation - Plug and play – ready to use immediately - 60 Watt fiber laser source for high-contrast, fast marking with extremely high resolution (see photos) - Deep engraving up to 4mm possible (even in hardened steel) - Wobble function, e.g., for cleaning metal components - Suitable for engraving on many metals (stainless steel, brass, aluminium, etc.) and a wide range of plastics - Heavy-duty industrial quality - Complete system / immediately operational - Working area approx. 500 x 600 x 600mm (WxDxH) - Clamping surface with mounting threads in 50mm grid - LED work area lighting - 50mm port connection for fume extraction Gisdsfkgq Nepfx Af Tjp - Engraving area approx. 180 x 180mm (expandable up to approx. 300 x 300mm) - Incl. foot switch for starting the engraving process Please also ask about our attractive leasing/financing offers. Sale is exclusively to commercial customers. Delivery / advice / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 150kg

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, warranty duration: 12 months, laser wavelength: 1,070 nm, Equipment: cabin, Laser Engraving Machine with 30 Watt Laser Power - Demonstration unit (approx. 10 hours of use) - Worth a look - Incl. Windows PC 64bit (incl. monitor/keyboard/mouse) - Fully installed and calibrated - Engraving software in German - Very easy to operate - Switch on and start immediately - Fiber laser source with 30 watts for high-contrast and fast markings with extremely high resolution (see photos) - Wobble function, e.g. for cleaning metal components - Deep engraving up to 3mm possible - Suitable for engraving on many metals (stainless steel, brass, aluminum, etc.) and a wide range of plastics - Heavy-duty industrial quality - Complete system / ready for immediate use - Working area approx. 390 x 270 x 350mm (L x W x H) - Clamping table with mounting threads in a 50mm grid - LED work area lighting - 50mm port for fume extraction Gisdpfed Ha I Sex Af Tep - Engraving area up to 170 x 170mm - Motorized focus adjustment - Incl. foot switch to start the engraving process Please also take note of our attractive leasing/financing offers. Sale exclusively to commercial customers. Delivery / consulting / sales only within Germany / Austria / Switzerland Machine dimensions approx.: Width: 450mm Height: 800mm Depth: 750mm Weight: approx. 80kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 10,700 mm, input voltage: 230 V, laser power: 150 W, type of cooling: water, warranty duration: 12 months, Equipment: cabin, Laser cutting machine from our showroom with 150-watt laser power Delivery time: immediately available ----- Switch on and start working ----- ----- Machine with only approx. 10 operating hours ----- ----- Year of manufacture: 2025 ----- ----- Professional-grade machine ----- - incl. Windows 11 PC system / monitor / keyboard / mouse - Pre-installed cutting and engraving software in German - Fully integrated and ready for immediate use - Capable of extremely fine engraving as well as precise cutting of thick wood or acrylic (PMMA) - Machine was only used for demonstration purposes - Highly versatile cutting system - Cuts wood up to 20 mm thick - Cuts acrylic and various other plastics - Cuts fabrics, nonwoven materials, etc. - Cuts rubber sheets - Engravings on wood, concrete, stone, many plastics - Production of stamps Giodpfx Afsfkgq As Top - Heavy-duty industrial quality - Travel range: 1300 x 900 mm - Drives with hybrid servos - Linear guides on all axes - reci laser tube with 150 watts peak output - incl. honeycomb worktable (removable / extendable) - incl. knife blade table (removable / extendable) - Sheets up to approx. 20 mm thick can be fed through the machine - Continuous processing possible - incl. generously dimensioned laser chiller - incl. high-capacity extraction system - Very easy to operate - Machine control in German - Machine controller in German with large color display - Highly reliable data transfer via USB and network cable - No hassle with occupational safety authorities - All spare and wear parts are in stock Please also see our attractive leasing/financing offers. Sale exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 200 cm Height: 125 cm Depth: 150 cm Shipping weight: approx. 600 kg

Condition: used, mileage: 570,000 km, power: 340 kW (462.27 HP), first registration: 06/2017, fuel type: diesel, empty load weight: 10,685 kg, maximum load weight: 15,315 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,600 mm, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Location: Eugendorf, unladen weight: 10,685 kg, permissible total weight: 26,000 kg, air-air suspension, subject to errors and changes. Sale to business customers only. Gsdox Stgzopfx Af Tjip