Used Atlas Copco Xats 156 Dd for sale (396)

Condition: ready for operation (used), There are 2 compressors available. 1) CSC from 300-670, year of manufacture: 1997. 2) Atlas Copco GX5FF EP, year of manufacture: 2019. Motor power: 5.5kW, max. operating pressure: 10bar, capacity FAD: 13l/s, 46.8m³/hr, 27.5cfm, noise level: 65dB(A), standard air tank size: 200l. Dimensions X/Y/Z: approx. 1430mm/665mm/1260mm, weight: 210kg. Documentation available. Bsdpfx Ajtnf Iuegzeld

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Bodpfx Agoxmkc Tszold

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Blsdpfx Agox Ih D Tszsd

Condition: ready for operation (used), Year of construction: 2021, A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible. Blodpfsxu I A Tsx Agzsd

Condition: good (used), Year of construction: 2011, MANUFACTURER: ATLASCOPCO MODEL: GA160VSD SERIAL NUMBER: APF163595 YEAR: 2011 POWER (kW): 186 Bsdpfx Aeyn Efgjgzjld CAPACITY (m3/min): 4.82–18.36 PRESSURE (bar): 10

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 822 kW (1,117.61 HP), For sale is an oil-free air compressor from Atlas Copco, model ZH6-5, in good, fully operational condition. The unit comes from industrial use and is ideally suited for applications requiring high standards of clean compressed air. The compressor is robustly constructed, making it particularly suitable for industry, food production, pharmaceuticals, or any other sector where oil-free air is essential. An inspection can be arranged by appointment. Technical specifications: • Manufacturer: Atlas Copco • Model: ZH6-5 • Year of manufacture: 2001 • Max. operating pressure: 8.8 bar • Power: 822 kW • Speed: 2980 rpm • Serial number: S88668802 • Design: oil-free • Quantity: two units available Bsdpfxjyi H Eks Agzeld Scope of delivery: • Compressor unit as shown • Integrated control cabinet/controls

Condition: like new (used), Year of construction: 2021, operating hours: 23,369 h, functionality: fully functional, Atlas Copco GA160VSD+FF screw compressor. Integrated dryer and inverter. 160 kW with 8.3 bar and 33.10 m³/min. Equipped with heat recovery system. Blsdpeyfl Ivsfx Agzsd

Condition: good (used), Pneumatic double diaphragm pump Bodpfx Ajdwf S Uogzjld -Fast venting and immediate suction of the medium -Dry running without: damage -Hermetically sealed for: moisture-sensitive liquids -Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces: -Air max. Pressure: bar -Air connection: 1 "inch -Water output: l/min -Water max. Pressure: bar -Connection: B coupling -Dimensions: 480/400/H530 mm -Weight: 32 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Atlas Copco, Standard cylinder type C4-200-40 -Stroke travel: 200 mm -Piston rod: Ø 40 mm -Dimensions: 330/280/H510 mm Total weight: 33 kg Bsdpfsgr E R Aex Agzeld

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 240 mm Blodpfxegrzvke Agzjd -Piston rod: Ø 40 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 320/280/H470 mm -Weight: 34 kg/piece

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 410/55/H55 mm Bljdpofbnkaofx Agzed -Weight: 1.5 kg/piece

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 -Stroke: 194 mm -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm -Total weight: 24 kg Bsdpjgr E R Ujfx Agzjld

Year of construction: 2005, condition: used, Balancers, machine balancers, spring balancer, cable pulley, counterbalance weight balancers -Manufacturer: Atlas Copco, type RIL 10C -Load capacity: 2.0 - 5.0 kg -Dimensions: 200/250/70 mm Bjdpfxsgggy Eo Agzeld -Own weight: 2.6 kg

Condition: used, Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Barrier width: max. 100 mm Bledpfx Agod N Rt Dszsd -Payload: 2500 kg -Dimensions: 327/200/H270 mm -Weight: 27 kg

Condition: excellent (used), Year of construction: 2009, operating hours: 65,190 h, functionality: fully functional, Oil-free screw compressor Atlas Copco ZT200, 200 kW, 8.6 bar with 30.60 m3/min Bljdpfxeydcy Tj Agzsd

Year of construction: 1997, condition: ready for operation (used), With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers. Bedpfsl Tn Epsx Agzold

Condition: ready for operation (used), An inspection is possible. Bledpfx Agsn D Hbnjzjd

Condition: excellent (used), Year of construction: 2014, We are offering an x2 ATLAS COPCO ZR 400 7.5 compressor with the following specifications: Bedsu Szu Njpfx Agzeld Max working pressure: 7.5 bar Hours: 53000 Input power: 355 kW Rotational shaft speed: 1485 rpm Year of manufacture: 2014 The compressors were removed from a company that ceased operations. Additional Equipment Included: The compressors comes with x2 Atlas Copco air dryer, Model: MD1000 W CE, featuring: Max working pressure: 10.5 bar Year of manufacture: 2014 Please include your price offers directly when reaching out to us

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Premium dryer with inverter Atlas Copco FD220VSD-G 13.20 m³/min. Year of manufacture: 2023 Bedpfx Ageya Dn Dszold

Condition: used, color: red, Year of construction: 1981, operating hours: 4,391 h, Tank pressure: 11 bar Bljdsx S Nxaspfx Agzsd

Condition: excellent (used), Refrigeration Compressed Air Dryer Manufacturer: Atlas Copco Model: FD 120 Year of manufacture: N/A, presumably 2013-2014 Flow rate: 120 L/sec Max. operating pressure: 14 bar Bedpfx Aeya A Uvjgzjld Pressure drop: 0.11 bar Weight: 160 kg

Condition: ready for operation (used), operating hours: 20,000 h, functionality: fully functional, 1.46–7.25 m³/min, recently measured. Bedsyg H Tcspfx Agzold

Condition: excellent (used), Year of construction: 2012, operating hours: 96,138 h, functionality: fully functional, overall weight: 8,540 kg, total length: 4,200 mm, total width: 2,150 mm, total height: 2,400 mm, motor manufacturer: Siemens, power: 525 kW (713.80 HP), operating pressure: 10 bar, noise level: 77 dB, type of cooling: water, Equipment: documentation/manual, type plate available, 1 unit variable-speed screw compressor Compressor was operated until January 2024. Last service: March 2024 Located in a heated compressor room Very clean and well-maintained machine!! Manufacturer: Atlas Copco Model: ZR 500VSD Operating pressure: 7 to 10.4 bar Volume flow: 22.4 to 70.7 m³/min (374 to 1178 liters/second) Operating hours: 96,138 Sound pressure: 77 dB(A) Cooling: Water-cooled Speed control: Frequency inverter Dimensions: Length: 4,200 mm Width: 2,150 mm Height: 2,400 mm Weight: 8,540 kg Bedsyiuvkepfx Agzsld Electric motor: Siemens Power: 525 kW Voltage: 400 Volt With standstill heating

Condition: excellent (used), Year of construction: 2016, ATLAS COPCO GA26VSDFF screw compressor – unit with inverter and air dryer, after service. Technical data: Capacity: 5.15 m3/min; Motor power: 26 kW; Bledpfjylmaaox Agzed Max pressure: 12.75 bar; Year: 2016 Operating hours: 6317!!! Price: 32,900 net / 40,467 gross The compressor is fully operational, ready for work, comes with warranty. Service provided. Video link below.

Condition: excellent (used), Year of construction: 2014, ATLAS COPCO GA22VSDFF screw compressor – unit with frequency inverter and air dryer, post-service Technical data: Capacity: 4460 m3/min Blodpfx Agoyll Uiezed Motor power: 22 kW Max pressure: 12.75 bar Year: 2014 Operating hours: 7,836 Price net: 28,900 Gross: 35,547 The compressor is fully operational, ready for work, comes with warranty. Service provided. Video link below.