Used Atlas Copco Xas 186 for sale (440)

Condition: good (used), Year of construction: 2013, Atlas Copco Nlsdpfewk Hcyox Amneb GA7 - 13 VSD Screw Compressor Fully automatic, fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-damped. Discharge pressure: 13.00 bar Motor power: 7.50 kW Free air delivery: 1.26 m³/min

Condition: new, Year of construction: 2023, Atlas Copco GA7 VSDs P - 13 Screw Compressor Fully automatic, fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-damped, and variable speed. Discharge pressure: 13.00 bar Motor power: 7.50 kW Nlodowk Ewispfx Amneb Free air delivery: 0.38 - 1.36 m³/min

Condition: excellent (used), Year of construction: 2022, Atlas Copco Nsdewhwubopfx Amnslb FX 300 Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Flow rate: 18,00 m³/min

Condition: new, Year of construction: 2024, Atlas Copco FX 200 Refrigeration Dryer Nlsdpowhv Uyjfx Amneb Compact, fully automatic, air-cooled compressed air drying system. Flow rate: 12,00 m³/min

Condition: excellent (used), Year of construction: 2022, Atlas Copco FX 110 Njdpfowhu Ilsx Amnelb Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Flow rate: 6,60 m³/min

Condition: excellent (used), Year of construction: 2023, Atlas Copco FX 5 Nledpfewhlk Rsx Amneb Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Flow rate: 0.36 m³/min

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 10001626, Equipment: documentation/manual, 2x Atlas Copco Heat Pump Compressor With Spares (Unused 2021) Atlas Copco heat pump compressor 1 with coupling Atlas Copco heat pump compressor 2 with coupling Oil system Run down tank With spares as seen in asset list Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement form (EUS) by the buyer, and, if the buyer is not the end user, for each end user. Nodpfx Amoy Tccbonelb

Condition: used, Year of construction: 1994, 1994 | Atlas Copco Qas 28 | Used Generator Set 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 4000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Njdoy Rukfepfx Amnslb 👷‍♂️ Inspected by an independent expert 23 inspection points 18 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Generator Set 30 kVA, 77A/44A 230V/400V. Circuit breakers 40A and 16A. A 32 A socket added on the fly. Number of hours unknown. Works well. Year 1994. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39926 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2012, operating hours: 29,610 h, functionality: fully functional, Screw compressor, Atlas Copco GA55+FF Dryer integrated 55 kW 8.20 bar 10.44 m3/min Year of manufacture: 2012 Nlsdpfxjy Urx Is Amnob Operating hours: 29,610

Condition: used, Year of construction: 2004, Technical details: feed pressure: 9,75 bar liter capacity: 10,1 l total power requirement: 5,5 kW volume capacity: 10,1 m³/min. Number of working hours: 26071 h revolutions per minute of the motor:: 3000 U/min. protection class: CE 0038 machine weight approx.: 310 kg dimensions L x W x H: 1,2 x 0,6 x 1,0 m Condensate separator installed. Restriction: Overload valve does not switch off automatically. For sale as is. * Nledpfx Ameu Szlujnob

Condition: excellent (used), Year of construction: 2013, operating hours: 20,453 h, functionality: fully functional, Atlas Copco GA11VSD+ screw compressor Inverter integrated 11 kW 13 bar 1.95 m3/min Year of manufacture: 2013 Nljdpfey Uiycox Amnob Operating hours: 20,453

Condition: used, Year of construction: 2002, Max. working pressure: 7.7 bar, volume approx. 280 m³/min, input power 824 kW /// Drive motor: model AMA 400S2L BSH, 1,000 kW / 5,500 V / 121 A / 50 Hz / 2,969 rpm, weight approx. 3.5 tons /// Centrifugal compressor: model ZH 10,000-5-7, max. input 1,737 HP, input 2,969 rpm, max. output 12 bar Njdpfxeym Twns Amnelb

Condition: used, Year of construction: 2010, Lot consists of: (1) Compressor Technical Details: Nledpfx Asym Txxemnjb max. 8.6 bar, Input 702 kW / 1,700 rpm

Condition: like new (used), Atlas Copco / Scheugenpflug The entire system is unused and in like-new condition Model: VDS P6030 Automatic processing of a complete cycle from loading to unloading Mixing of two components (e.g., resin and hardener) directly in-process Precise application of material at defined positions on the workpiece Component handling via a 3-axis system (X, Y, Z) Operation in automatic, semi-automatic, and manual modes Technical data: Power supply: 400 V AC, 50/60 Hz Rated current: 13.6 A Power consumption: 8.5 kVA Fusing: 3 × 32 A Control voltage: 24 V DC Operating pressure: 6 bar Pressure monitoring: 4 bar Compressed air connection: 6 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP21 Foundation slope: max. 0.05% Clearance around machine: 0.8 m Clearance in front of control cabinet: 1.2 m Width: 1660 mm x Height: 2305 mm x Depth: 1315 mm Weight: 600 kg Sound pressure level: ≤ 70 dB(A) Model: A310 Technical data: Tank volume: 60 l resin and 20 l hardener Agitator in each tank Vacuum sensor for each tank Level sensors including overfill protection Suction valve per tank Sight glass with illumination Vacuum degassing directly in tank Material circulation to prevent sedimentation Optional tank heating Pneumatically driven piston pumps Delivery volume approx. 294 cm³ per stroke 1 or 2 pumps per tank possible Continuous dosing with dual pump system Pump variants: horizontal and vertical, suitable for highly viscous materials Vacuum generation via vacuum pump or ejector Oil separator to protect vacuum pump Control via SCP touch panel Operating modes: Automatic, pause, external control Material circulation during pause mode Possible integration to external control via interface Monitoring of production time, system availability, and material consumption Calculation of remaining material availability Power supply: 230 V or 400 V AC Operation outside EU with transformer possible Operating temperature: +5 °C to +40 °C With vacuum pump: +10 °C to +40 °C Humidity: 10 to 80 percent Protection class: IP20 Dimensions: Width 700 mm x Height 1950 mm x Depth approx. 1165 mm Weight: approx. 400 kg Model: LP804 Technical data: Application: Conveying and preparation of 1K and 2K dispensing materials (low to medium viscosity, also abrasive) Tanks have 50 and 20 liter capacity Control voltage: 24 V DC Power supply: per wiring diagram Rated current: per wiring diagram Power consumption: per wiring diagram Fusing: per wiring diagram Operating pressure: 6 bar Pressure monitoring: 4 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP54 System protection class: IP20 Installation surface: max. 0.5% slope Clearance around system: 0.8 m Clearance in front of control cabinet: 1.2 m Dimensions: Width: 1500 mm x Height: 2050 mm x Depth: 770 mm Weight: 430 kg Noise level: ≤ 70 dB(A) Condition: unused Scope of delivery: (see picture) Nljdpey Naf Ejfx Amnob (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Condition: like new (used), Year of construction: 2017, operating hours: 5,425 h, functionality: fully functional, Screw compressor, Atlas Copco GA30FF Dryer integrated. 30 kW Nodpfey Tvd Ssx Amnelb 9.75 bar 4.79 m3/min Year of manufacture: 2017 Operating hours: 5,425

Condition: excellent (used), Year of construction: 2015, General information Field of application: Construction Weights Empty weight: 1.500 kg Functional Dimensions of cargo space: 200 x 70 x 80 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Nljdpfxjy N Sdtj Amnob Visual appearance: very good Other information Fits to following machines: 19 - 32 t Remanufactured: Yes Delivery terms: EXW Working pressure: 160-180 bar Required hydraulic flow: 170 l/min Strike count: 320-640 Latest inspection: 2026-04-27 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer you Rebuild/overhauled/ überholt Atlas Copco/ Epiroc MB1700DP from 2015. This model has New seal kit, retainer pins, bushes, stop pin, chisel/tool, shock absorber, hoses, decals, ContiLube and new painted. More units available. We can ship worldwide. MB1200 HB2000 MB1650 MB1700

Condition: used, Year of construction: 2004, - Data: see the nameplate. Nlodoy Tndqepfx Amnsb

Condition: used, Year of construction: 2024, Compressor: Max. pressure (bar): 10 Max. pressure (psi): 145 Max. pressure (MPa): 1.0 Flow rate (l/s): 166.7 Flow rate (cfm): 353.1 Flow rate (m³/min): 10.0 Voltage (V): 400 Frequency (Hz): 50 Phases: 3 Motor power (kW): 55 Motor power (hp): 73.76 Motor speed (rpm): 2980 Nodpfxoy N Sa Is Amnslb Weight (kg): 1365 Weight (lb): 3009 Air Dryer: Weight (kg): 174 Max. air pressure (bar): 14 Max. ambient temperature (°C): 46 Refrigerant type: R513A Max. refrigerant high pressure (bar): 21.7 Voltage (V): 400 Frequency (Hz): 50 Phases: 3 Power (kW): 3.23 Max. temperature (°C): 60 Min. temperature (°C): 5 CO2 equivalent (t): 1.75 CO2 equivalent (kg): 1104 Max. low pressure (bar): 4.8

Condition: used, Year of construction: 2015, functionality: fully functional, complete nitrogen generator with 30 bar booster and storage tanks Nledey N Tcqepfx Amnsb

Condition: like new (used), Year of construction: 2005, operating hours: 301 h, functionality: fully functional, overall weight: 2,800 kg, motor manufacturer: Mercedes, power: 130 kW (176.75 HP), fuel type: diesel, fuel tank capacity: 450 l, volume flow: 14.4 m³/h, operating pressure: 12 bar, pressure (max.): 12 bar, type of cooling: air, Equipment: type plate available, Compressor in like-new condition, was used as an emergency compressor inside the machine room. Equipped with a built-in aftercooler. Nodpfey N A Ebsx Amnslb

Condition: good (used), Year of construction: 2020, Atlas Copco FX 14 Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Flow rate: 12,00 m³/min Nledpfx Aowhv Adjmnjb

Condition: excellent (used), Year of construction: 2012, operating hours: 72,651 h, functionality: fully functional, Screw Compressor Atlas Copco GA37VSDFF Integrated inverter and dryer Nsdpfsy Rva Ijx Amnolb 37 kW 12.80 bar 7.37 m³/min Year of manufacture: 2012 Operating hours: 72,651

Condition: excellent (used), Year of construction: 2019, operating hours: 53,672 h, functionality: fully functional, Screw compressor Atlas Copco GA110VSD+FF Integrated inverter and dryer 110 kW Nledpfxjy Ru Sce Amneb 12.75 bar 20.70 m3/min Year of manufacture: 2019 Operating hours: 53,672

Condition: excellent (used), Year of construction: 2019, operating hours: 10,603 h, functionality: fully functional, Screw compressor Atlas Copco GA45+ 45 kW 7.5 bar 8.90 m3/min Nljdpjy Ru H Tjfx Amneb Year of manufacture: 2019 Operating hours: 10,603

Condition: good (used), Year of construction: 2013, overall weight: 1,519 kg, power: 75 kW (101.97 HP), volume flow: 14.85 m³/h, pressure (max.): 12.8 bar, Air Compressor Atlas Copco GA75VSD FF Technical Data Manufacturer: Atlas Copco Airpower Model: GA75VSD FF Year of manufacture: 2013 Maximum pressure: 12.8 bar Free air delivery: 14.85 m³/min Motor power: 75 kW Motor speed: 3,000 rpm Weight: 1,519 kg Njdpfsxk U Alsx Amnslb Power supply: 400 V 50 Hz 3 phase Design: Oil-injected screw compressor Control: Electronic control panel Origin: Made in Belgium No liability is accepted for the correctness, completeness, or up-to-dateness of the information provided.