Used Atlas 86 E for sale (466)

Year of construction: 2022, condition: ready for operation (used), A mint condition and oil-free Atlas Copco screw compressor system with hardly any operating hours is available. Volume flow at 1.9bar and 193kW: 67m³/h, max. pressure: 2.75bar, output: 200kW, outlet air temperature: 176°C, operating hours: 41h. Including electronics, sound enclosure and starter. Documentation available. On-site inspection is possible. Cpjdpfsv Tcq Tjx Agzjw

Year of construction: 2000, condition: ready for operation (used), There are 3x Kaeser compressors, 2x Atlas Copco compressors and 3x Kaeser refrigeration dryers available. 1) Compressor Kaeser CS 75, year of manufacture: 1992, operating pressure: 10bar, operating hours: 38265h. 2) Compressor Kaeser AS 44, year of manufacture: 1999, operating pressure: 8.5bar, operating hours: 41564h. 3) Compressor Kaeser BS 60, year of manufacture: 1983, operating pressure: 7.5bar, operating hours: 50674h. 4) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 26831h. 5) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 52447h. 6) Refrigeration dryer Kaeser TD 51, year of manufacture: 1997, refrigerant: R22. 7) Refrigeration dryer Kaeser TF 171, year of manufacture: 2000, refrigerant: R134a. 8) Refrigeration dryer Kaeser TE 76, year of manufacture: 1996, refrigerant: R22. Documentation available. On-site inspection is possible. Cjdoulkvdopfx Agzjpw

Condition: ready for operation (used), There are 2 compressors available. 1) CSC from 300-670, year of manufacture: 1997. 2) Atlas Copco GX5FF EP, year of manufacture: 2019. Motor power: 5.5kW, max. operating pressure: 10bar, capacity FAD: 13l/s, 46.8m³/hr, 27.5cfm, noise level: 65dB(A), standard air tank size: 200l. Dimensions X/Y/Z: approx. 1430mm/665mm/1260mm, weight: 210kg. Documentation available. Codpfx Ajtnf Iujgzopw

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Cpjdex Ih D Tjpfx Agzjw

Condition: ready for operation (used), Year of construction: 2021, A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible. Cpedpjxu I A Tefx Agzjw

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 822 kW (1,117.61 HP), For sale is an oil-free air compressor from Atlas Copco, model ZH6-5, in good, fully operational condition. The unit comes from industrial use and is ideally suited for applications requiring high standards of clean compressed air. The compressor is robustly constructed, making it particularly suitable for industry, food production, pharmaceuticals, or any other sector where oil-free air is essential. An inspection can be arranged by appointment. Technical specifications: • Manufacturer: Atlas Copco • Model: ZH6-5 • Year of manufacture: 2001 Codpfx Aeyi H Ekegzepw • Max. operating pressure: 8.8 bar • Power: 822 kW • Speed: 2980 rpm • Serial number: S88668802 • Design: oil-free • Quantity: two units available Scope of delivery: • Compressor unit as shown • Integrated control cabinet/controls

Condition: used, Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 600 mm -Contents: 400 l Cpsdpfxsx R Sv Es Agzow -Opening width: 1400 mm -complete: with rotary servo -Mounting bolt: Ø 80 mm -Intermediate mounting dimension: 340 mm -Weight: 700 kg

Condition: good (used), Hydraulic clamshell grapple, hydraulic rotary grapple, clamshell grapple, hydraulic grapple, digging grapple -Manufacturer: Atlas, clamshell bucket -Bucket width: 400 mm -Opening width: 1520 mm -Total height: 2190 mm -Mounting bolt: Ø 45 mm, dimensions see photos -Transport dimensions: 1520/500/H1685 mm -Weight: 682 kg Cpodpfotvb Evsx Agzsw

Condition: used, Hydraulic clamshell grapple, hydraulic rotary grapple, clamshell grapple, hydraulic grapple, digging grapple -Manufacturer: Atlas Weyhausen, clamshell bucket Cpsdpfx Aetvb E Dogzjw -Bucket width: 610 mm -Filling capacity: 350 liters -Opening width: 1420 mm -Total height: 2080 mm -Mounting bolt: Ø 45 mm, dimensions see photos -Transport dimensions: 1420/610/H1580 mm -Weight: 697 kg

Condition: used, mileage: 1,001 km, power: 65 kW (88.38 HP), gearing type: automatic, fuel type: diesel, color: orange, overall weight: 7,400 kg, empty load weight: 6,700 kg, axle configuration: 4x4, number of seats: 1, first registration: 01/2006, Year of construction: 2006, operating hours: 7,975 h, front tire size: 405/70-24, rear tire size: 405/70-24, driver cabin: other, wheelbase: 2,270 mm, Equipment: additional headlights, all wheel drive, standard shovel, Vehicle location: Bovenden, rear window, working lights Wheelbase: 2270 mm Deutz diesel engine type 5F4L 2011, loading length approx. 5700mm! Height 3850mm Approx. 7,975 operating hours! Cpodpfovhiq Asx Agzjw Various accessories (high tip bucket, pallet fork, bucket separator) available at extra charge! MB-HDS 214 bucket separator for 8.900,- EUR surcharge, see -8578-! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, first registration: 03/2012, color: grey-black, Year of construction: 2012, gearing type: other, LICENSE PLATE: AH12361 TITLE: ATLAS ROLL-OFF TRAILER WITH AIR SUSPENSION, SANDBLASTED AND REPAINTED REF: 25R02 YEAR: 03/2012 AXLES: 2 WHEELBASE: 4800 mm OVERALL LENGTH: 9.16 m NATIONAL/INTERNATIONAL: Italy PAYLOAD: 16,400 kg - TRAILER GVW: 20,000 kg when fully loaded BODY TYPE: Roll-off BODY BRAND: ATLAS ADR: Yes BODYWORK SUITABILITY Cedpfx Aewq Ey Rjgzopw FROM: 5.00 m + 0.20 m TO: 7.00 m + 0.20 m SUSPENSION: Air BRAKES: Disc brakes TYRES: 265/70 R19.5 ACCESSORIES - 4 new brake discs - New brake pads - Caliper locking with towing vehicle’s oil hoses - 4 inner calipers (2 per side, operate independently) REFURBISHED: Yes INSPECTED: Yes TYRE CONDITION: 30% front, 40% rear PRICE: €17,500.00 + VAT Subject to errors and/or omissions The prices shown do not include VAT. Please contact our sales department for up-to-date prices and terms. For further information: Loris: 3484773001 URL: #therolloffspecialists AURORA ROLLOFFS specializes in the sale and purchase of industrial and commercial vehicles, primarily in the waste sector. Specialists in trucks, trailers, and roll-off equipment. With a fleet ready for immediate delivery of over 50 trucks and more than 150 bins and containers, with or without roll-off cranes. E.&O.E. Due to the large number of listings and details provided, Aurora invites you to confirm the accuracy of the information with our sales staff.

Condition: used, color: red, Year of construction: 1981, operating hours: 4,391 h, Tank pressure: 11 bar Cpjdsx S Nxaopfx Agzew

Year of construction: 1997, condition: ready for operation (used), With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers. Cpsdpfx Asl Tn Epjgzjw

Condition: used, Year of construction: 2002, operating hours: 15,152 h, Equipment: all wheel drive, * Pallet fork & bucket * Enclosed cab * Front hydraulics * Engine power: 74 kW * Year of manufacture: 2002 * Work lights ----Internal vehicle number 9531----Errors & interim sale excepted Cedpfx Astrqk Rsgzepw WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp WhatsApp German, English -- WhatsApp German, English, Arabic

Condition: like new (used), Atlas Xenotest Type: Xenotest Beta+ Weathering Test Instrument XENOTEST BETA+ – Material Testing Device / Weathering Tester with Humidification and Spraying System For sale is a professional XENOTEST BETA+ weathering tester from ATLAS Material Testing Technology GmbH. This device is designed to simulate sunlight, weather, and climatic influences and is used worldwide in research, quality control, and material testing. Features: - Professional equipment for UV and weather resistance tests - Ideal for laboratories, industry, and quality assurance - Fully functional, including comprehensive technical documentation Technical Data & Features: - Weathering and lightfastness testing unit with three air-cooled xenon lamps Cpodsw Thykspfx Agzow - XENOCHROME filter systems (300 / 320) for spectral distribution adjustment - Humidification and spraying system (ultrasonic humidifier, spray rods) - Measuring system with XENOSENSIV sensor for irradiance and black standard temperature measurement - Integrated touchscreen display for control and programming - Pre-installed standard tests (e.g., ISO 11341, ISO 4892-2, ISO 105-B02/B06), as well as freely programmable test procedures - Documentation capability via integrated printer (paper rolls) - Water reservoir (approx. 40 liters, for demineralized water) - Dimensions: approx. 900 × 1200 × 1800 mm (W × D × H) - Weight: approx. 400 kg - Power supply: 400 V (CEE 32 A, 5-pin) Condition: used Scope of delivery: (see image) (Specifications and technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: like new (used), Here we offer you a weathering tester. The Xenotest Beta+ is a high quality xenon device with a rotating sample carousel and an exposure area of 4000 cm². It has a complete set of parameter control options. Irradiance and temperature are measured and controlled directly at the sample level using XENOSENSIV sensor technology. The Beta+ meets the vast majority of industry standards. Its large test chamber and high reliability make it ideal for larger test volumes or sample sizes. - 3x 2200 W air-cooled xenon lamps - 4000 cm² exposure area - High irradiance testing up to 120 W/m² (2 suns) - Touch screen with color display for monitoring and displaying test parameters - Direct setting and control of irradiance (300-400 nm) - Direct setting and control of black standard temperature Cpjdpfxjihfrro Agzow - Direct setting and control of chamber air temperature - Direct setting and control of relative humidity - Display of diagnostic messages - Memory for 10 user-defined test methods - Preprogrammed international standard test methods - Multilingual user interface - Non-aging XENOCHROME filters to simulate daylight outdoors, Daylight behind windows - On-rack XENOSENSIVE 300-400 nm for measurement and control of irradiance (in W/m2) and BST (°C) at sample level - Selectable temperature control either via chamber air temperature (max. 70 °C) or via Dual control: chamber air temperature and Schwarz standard temperature (up to 130 °C) - Fan-controlled temperature difference between chamber and black standard temperature - Ultrasonic humidification system for humidity control - Sample spray system with integrated 60 liter water reservoir - Outer cylinder made of special UV glass - Shutdown after irradiation amount, exposure time or total operating time - Advanced auto-start functions - Data output via memory card or RS 232 interface - Ethernet interface for connection to internal computer network and use of of XenoTouch Add-Ons 1, 2 and 3 (remote control, e-mail service, online monitoring) Dimensions Width x depth x height: 900 x 1200 x 1800 mm Weight: 400 kg Type: Xenotest Beta+ Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Atlas Type: Xenotest Alpha LM High Energy Weathering tester Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOCHROME Filter XENOSENSIV gearbox Control of lamp power in W/m² Sample chamber temperature controlled up to 70 degrees Cpsdpfsuuarysx Agzsw Measuring sensors at sample level XENOSENSIV E(300-400 nm) and SST Stationary sensor for sample chamber temperature and relative humidity Humidification Irrigation Water supply with integrated water tank Electronic version: 230V, 50/60Hz Absorption filter 7 IR: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Window glass 10 FG: Synchronization 40 - 110 W/m² Coil run 21 - 57 W/m² Absorption filter 4 IR + 3 window glass: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Absorption filter 6 IR + 1 UV: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Rel. electrical power without XENOSENSIV sensor: continuously regulated to the set value 53 - 120 % Sample chamber temperature: 20 - 70° (depending on selected filter configuration) Black standard temperature: synchronized 25 - 130 °C coiled 25 - 100 °C Relative humidity: 10 % - 95 % Fan revolutions: 500 - 2500 rpm Dimensions: 900 x 780 x 1800 mm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Atlas Type: CI3000+ Ci3000+ Weather-Ometer/ Fade-Ometer Model: CI3000W Year of manufacture: 06/2022 Operating time: Device 816.5 hrs. Light duration device 647.4 hrs. Total lamp operation 88.9 hrs. Atlas CI3000+ Xenon Weather-Ometer with calibration case The Ci3000+ Weather-Ometer and the Fade-Ometer with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering instruments. The 3000 series is recognized by many OEMs in the textile, paint, coatings and plastics industries as the exclusive platform for precise, reproducible and repeatable results, reproducible and repeatable life prediction results. The 3000 series is CE, UL, CSA, ISO and EN certified. Key features of this device include: a rotating sample basket to maximize the homogeneity of all samples; customized nozzles for uniform sample front and back spraying; ASTM black plate thermometer or ISO/DIN black standard thermometer for control and monitoring, temperature at sample level to ensure test repeatability. 4500 W water-cooled xenon lamp Total exposure area 2188 cm2 (339 in2) 12-inch TFT full-color touchscreen control panel - display of all test parameters Direct setting and control of black panel (BPT, non-insulated) or black standard (BST, insulated) temperature Direct setting and control of relative humidity Direct setting and control of the air temperature of the sample chamber Display of diagnostic messages Cpsdpfx Agotq Em Eezsw 14 factory pre-programmed test methods (Weather-Ometer); 6 factory pre-programmed test methods (Fade-Ometer) Features: Climate type Test type Sunlight simulation Light source with xenon arc lamp Applications: Additives and colorants Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Voltage: 340-415V 43A 50/60Hz 〜3/N/PE 8kW 410 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer you a weathering test instrument. Heraeus Atlas Xenotest BETA a universal weathering instrument for testing the light fastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOSENSIV Gear Regulation of the lamp power in W/m² XENOCHROME 320 35-100 W/m² Sample chamber temperature controlled up to 80°C degree Measuring sensors at sample level XENOSENSIV E(300-400 nm) Humidification / Sprinkling Water supply with integrated water tank Sample chamber temperature: Ambient - 80 °C Black standard temperature: surface - 130 °C Relative humidity: 10 % - 95 % Electronic version: 3/N/PE AC 400V± 10 % 50-60 Hz Mains connection: 32A Power consumption: approx. 12kVA Rated power of xenon lamp 2200VA Power of Xenon lamp 2800VA Rated current 16A Lamp current max. 20A Dimensions: Width 900mm x Depth 1200mm x Height 1800mm. sample area max. 4000cm² Weight: approx. 400kg Type: Heraeus Atlas Xenotest BETA LM Condition: used / used Scope of delivery: (see picture) Codpfeg Dglysx Agzepw (Changes and errors in the technical data, specifications are reserved). Further questions we can answer on the phone for you.

Condition: excellent (used), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering instruments. The 3000 series is recognized by many OEMs in the textile, paint, coatings and plastics industries as the exclusive platform for precise, reproducible and repeatable results, reproducible and repeatable life prediction results. Features: Type Climate Test type Sunlight simulation Light source with xenon arc lamp Applications: Additives and colorants Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000 humidification system works with a compressed air ultrasonic spray nozzle. Before entering the system, the compressed air must be passed through a water/oil separator. The small air regulator in the Cİ3000 contains a second water/oil filter and a 5 micron solid filter. Make sure that a separate oil/water separator is installed and do not rely on the air regulator filter, as this is only designed as an additional device. Compressed air specifications Pressure 80-100 PSI (552-689 kPa) Flow rate 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the C13000 37.5 width X 29 depth X 72" height Cedpfxjucd Rbe Agzjpw (95 width X 73 depth X 183cm height) Required footprint: 41.5 width X 80" depth (105 width X 203cm depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz 〜3/N/PE 8 kW 404 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Blumer Atlas D-18 M Label punching machine Professional Swiss-made machine. Perfect condition, like new. Blumer is a leader in label punching. 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 150x180mm Min. format: 24x45mm Cycles: 18-6/min Stack height: 120mm Weight: 600kg The machine is equipped with a hydraulic quick-action unit. Codpfxsyi Dbpj Agzepw Tail on the delivery. Die positioning module, scrap cutting knives, and a die.

Condition: excellent (used), functionality: fully functional, overall weight: 1,570 kg, Year of construction: 2019, Two pieces available Machine type: internal combustion engine-driven pump Machine brand: ATLAS COPCO Designation: WEL PST 100 CNP Year of manufacture: 2019 Own weight (kg): 1570 Engine type: Hatz 2G40 /compression ignition/ Engine power (kW): 9.8 Engine capacity (cm3): 997 Codpfx Ajvz Drhegzepw Fuel type: diesel Maximum capacity – 100m3/h. Pumping height – 20 m. Suction pipe diameter – 100mm. Pumping pipe diameter – 100mm. The Atlas Copco WEL PST piston pump is a high-performance device suitable for difficult tasks requiring 24-hour operation, designed to save fuel.

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Design: stable -Width: 570 mm -Height: 450 mm -Depth: 600 mm Codpfob A I Inox Agzjpw -Intermediate mounting dimension: 160 mm -Hole spacing: 220 mm -Bore: Ø 45 mm -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 130 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Width: 600 mm -Height: 600 mm -Depth: 800 mm -Intermediate mounting dimension: 255/200 mm -Bore: Ø 45/50 mm -Laceration teeth Cedpjb A I Rcofx Agzopw -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 160 kg

Condition: ready for operation (used), Atlas Copco PF4000-C-PN-HW control system. 8433 7148 05 SN D 276 108, used, minor signs of wear, 100% functional, scope of delivery as per photos Cpederv Nz Aspfx Agzsw