Used Atlas 1404 M for sale (484)

Condition: used, overall weight: 560 kg, axle configuration: 1 axle, first registration: 06/2023, next inspection (TÜV): 06/2026, total width: 1,226 mm, total height: 1,225 mm, 7 bar, power 19.4 kW, new condition, volume flow 2.0 m³/min, support wheel, 2x air connections, Kubota 3 cylinders, all papers, vehicle can be pasted with advertising and/or labeled Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us! Gjdpfsxpzufsx Aayokf

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: BES041875, Thanks to its high impact frequency and reduced impact energy, it is primarily/ideally suited for use in track tamping or maintenance work. For driving rail spikes in wooden sleepers, driving pipes, posts, probes, and breaking concrete. Easy transport, short setup time, low emissions, low noise levels. HAPS (Hand and Arm Protection System). Gjdjx Eb Udopfx Aayskf

Condition: used, Year of construction: 2006, Serial number: 2031330E10xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21787 Gkedpfx Aaex Dquwoyef Specifications:• 2006 model• Hours: 3500• Weight: 5300 kg• 50 kW• Good tires• Bucket• Total width: 209 cm• Beacon light• Maintenance done by owner• Delivery by agreement Description:Atlas 65 Super wheel loader from 2006.The loader is sold with the bucket currently fitted.Maintenance has been done by the owner throughout. Own weight: 5300 Width: 209

Condition: good (used), functionality: fully functional, overall weight: 16,000 kg, Year of construction: 2006, operating hours: 9,580 h, Equipment: adjustable boom, all wheel drive, cabin, gripper hydraulics, hammer hydraulics, Atlas Terex 1305M mobile excavator, year 2006 with 9,580 operating hours, clamshell grab, blade stabilizer, Deutz engine, inspection by appointment also possible on weekends, total weight 16,000 kg. Gksdex Hk Dmepfx Aayjf

Condition: excellent (used), Year of construction: 2010, operating hours: 40,084 h, functionality: fully functional, Used screw compressor Atlas Copco GA26FF. 26 kW with 10 bar and 4.16 m3/min. Integrated dryer. New compressor stage installed. Godpfsx Eg T Sex Aayekf

Condition: used, Year of construction: 2023, machine/vehicle number: ESF371201, fuel type: diesel, power: 34 kW (46.23 HP), motor manufacturer: Kubota, Field of application: Construction Empty weight: 1.065 kg Generator capacity: 45 kVA Transport dimensions (LxWxH): 2.15x0.99x1.47 Gjdpfx Aastr Nknoyekf Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2018, operating hours: 5,081 h, Equipment: all wheel drive, Loading bucket approx. 1.8 m³, hydraulic quick-change system, pallet forks, good condition, vehicle may be wrapped and/or labeled for advertising purposes. Our offer is generally without new technical inspection (TÜV). If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! The vehicle may be wrapped and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. We are pleased to offer you financing or leasing options for this machine. Please contact us! Godpsxb Ivaofx Aayjkf

Condition: like new (used), Year of construction: 2023, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,081 kg, power: 75 kW (101.97 HP), volume flow: 1,500 m³/h, operating pressure: 13 bar, We have two Atlas Copco compressors and one oxygen generator type Oxymat ( Oxygen PSA. ) Hopefully the equipment will be sold together. Detailed description in documents attached. But we can say that the two compressors will have a capacity of 798 Nm3 each and the PSA can produce approx 250Nm3 oxygen per hour with purity of 93% +-1% Gksdpsxhdb Sefx Aayjf

Condition: used, Year of construction: 2022, machine/vehicle number: ESF08xxxx, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 21858 Specifications: 2022 model Gedpfjxypuhex Aayskf 400/230v Battery type: lithium-ion 36 kW 1657 kg Ready for delivery Description: We have a 2022 Zenergize Atlas Copco zbp45 w/ trailer for sale. Everything works as it should, according to the owner. Ready for delivery Own weight: 1657 Model: Copco zbp45 m/ henger

Condition: like new (used), Year of construction: 2013, operating hours: 200 h, functionality: fully functional, overall weight: 4,000 kg, power: 93 kW (126.44 HP), pressure (min.): 4 bar, pressure (max.): 4 bar, type of cooling: air, Equipment: type plate available, 2 units Atlas Copco low-pressure 4 bar oil-free screw compressors, frequency controlled. Like new, 200 operating hours, serviced annually by Atlas Copco. Price per unit. Gkodpfxoxyy T Uj Aaysf

Condition: like new (used), Atlas Xenotest Type: Xenotest Beta+ Weathering Test Instrument XENOTEST BETA+ – Material Testing Device / Weathering Tester with Humidification and Spraying System For sale is a professional XENOTEST BETA+ weathering tester from ATLAS Material Testing Technology GmbH. This device is designed to simulate sunlight, weather, and climatic influences and is used worldwide in research, quality control, and material testing. Features: - Professional equipment for UV and weather resistance tests Gkedpfx Asw Thyksaysf - Ideal for laboratories, industry, and quality assurance - Fully functional, including comprehensive technical documentation Technical Data & Features: - Weathering and lightfastness testing unit with three air-cooled xenon lamps - XENOCHROME filter systems (300 / 320) for spectral distribution adjustment - Humidification and spraying system (ultrasonic humidifier, spray rods) - Measuring system with XENOSENSIV sensor for irradiance and black standard temperature measurement - Integrated touchscreen display for control and programming - Pre-installed standard tests (e.g., ISO 11341, ISO 4892-2, ISO 105-B02/B06), as well as freely programmable test procedures - Documentation capability via integrated printer (paper rolls) - Water reservoir (approx. 40 liters, for demineralized water) - Dimensions: approx. 900 × 1200 × 1800 mm (W × D × H) - Weight: approx. 400 kg - Power supply: 400 V (CEE 32 A, 5-pin) Condition: used Scope of delivery: (see image) (Specifications and technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2018, operating hours: 36,997 h, functionality: fully functional, machine/vehicle number: API794107, overall weight: 1,489 kg, total length: 2,450 mm, total width: 1,020 mm, total height: 1,830 mm, power: 55 kW (74.78 HP), operating pressure: 9 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Atlas Copco ZR55VSDFF lubricated air compressor is ideal for those seeking efficient and reliable solutions in the field of compressed air. With a maximum working pressure of 9 bar, this model ensures optimal performance while maintaining reduced energy consumption thanks to its VSD (Variable Speed Drive) technology. Featuring a 55 kW power output, it is capable of supplying the required amount of compressed air for various industrial applications. Although this compressor is pre-owned, its weight of 1,489 kg attests to its robustness and durability, making it a smart choice for industrial installations that require effective and resilient equipment. By investing in the Atlas Copco ZR55VSDFF, you benefit from the expertise of a globally recognized brand renowned for quality compressed air solutions. It is a cost-effective option for those needing reliable performance in a proven design. Gkjdpfx Aoxugwieaysf

Condition: used, Year of construction: 2019, operating hours: 4,725 h, Equipment: all wheel drive, Loading bucket approx. 1.8 m³, hydraulic quick-change system, pallet fork, 3rd hydraulic circuit, central lubrication system, good condition, vehicle may have advertising decals and/or lettering. Our offer generally does not include a new roadworthiness inspection (TÜV). If a new inspection is desired, we are happy to provide a quote from our partner workshops! The vehicle may feature advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. We will gladly prepare a financing or leasing offer for this item. Gjdoxbz Ayopfx Aayekf Please contact us!

Condition: used, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21856 Specifications: 2020 model 5271 hours (I want to know a little) 1669 stroke hours Chassis (see pictures) New belts Recently serviced Carousel Water mist system CME grinder Leica GPS Vacuum cleaner Godoxypqpopfx Aayekf Drill bit holds on the side Protective cage Automatic drilling Light Air conditioning/ac Ready for delivery   Description: We have an Atlas Copco T35 w/ water mist, cme grinder and gps for sale. Everything works as it should according to the owner and service has just been taken. The rig's belts have also recently been replaced. The rig is well maintained and, according to the owner, is in excellent condition. Ready for delivery Engine hours: 5271

Condition: like new (used), Here we offer you a weathering tester. The Xenotest Beta+ is a high quality xenon device with a rotating sample carousel and an exposure area of 4000 cm². It has a complete set of parameter control options. Irradiance and temperature are measured and controlled directly at the sample level using XENOSENSIV sensor technology. The Beta+ meets the vast majority of industry standards. Its large test chamber and high reliability make it ideal for larger test volumes or sample sizes. - 3x 2200 W air-cooled xenon lamps - 4000 cm² exposure area - High irradiance testing up to 120 W/m² (2 suns) - Touch screen with color display for monitoring and displaying test parameters - Direct setting and control of irradiance (300-400 nm) - Direct setting and control of black standard temperature - Direct setting and control of chamber air temperature - Direct setting and control of relative humidity - Display of diagnostic messages - Memory for 10 user-defined test methods - Preprogrammed international standard test methods - Multilingual user interface - Non-aging XENOCHROME filters to simulate daylight outdoors, Daylight behind windows - On-rack XENOSENSIVE 300-400 nm for measurement and control of irradiance (in W/m2) and BST (°C) at sample level - Selectable temperature control either via chamber air temperature (max. 70 °C) or via Dual control: chamber air temperature and Schwarz standard temperature (up to 130 °C) - Fan-controlled temperature difference between chamber and black standard temperature - Ultrasonic humidification system for humidity control - Sample spray system with integrated 60 liter water reservoir - Outer cylinder made of special UV glass - Shutdown after irradiation amount, exposure time or total operating time - Advanced auto-start functions Gedpfxjihfrre Aayokf - Data output via memory card or RS 232 interface - Ethernet interface for connection to internal computer network and use of of XenoTouch Add-Ons 1, 2 and 3 (remote control, e-mail service, online monitoring) Dimensions Width x depth x height: 900 x 1200 x 1800 mm Weight: 400 kg Type: Xenotest Beta+ Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Year of construction: 2018, operating hours: 6,320 h, Equipment: all wheel drive, 4+1 bucket approx. 0.8 m³, hydraulic quick-coupler system, pallet forks. The vehicle may be wrapped and/or labeled with advertising. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide you with a quote from our partner workshops! The vehicle may be wrapped and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Please contact us! Gksdpfxexb Iuio Aayjf

Condition: used, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21853 Specifications: 2020 model About 5380 hours (will be a little) Straight grinder Chassis (see pictures) Recently serviced Carousel Rod shifter Vacuum cleaner Winch Protective cage Remote control Pendant on base Light Ready for delivery   Godpfx Ajxypprsayjkf Description: We have a 2020 Atlas Epiroc T30 drilling rig w/ L5 gps for sale. It has recently been serviced and everything works as it should, according to the owner. Services and maintenance are ongoing. The number of hours will increase slightly as the rig is in daily operation. Ready for delivery Engine hours: 5380

Condition: good (used), Atlas Type: Xenotest Alpha LM High Energy Weathering tester Gkedpfx Aouuarysayof Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOCHROME Filter XENOSENSIV gearbox Control of lamp power in W/m² Sample chamber temperature controlled up to 70 degrees Measuring sensors at sample level XENOSENSIV E(300-400 nm) and SST Stationary sensor for sample chamber temperature and relative humidity Humidification Irrigation Water supply with integrated water tank Electronic version: 230V, 50/60Hz Absorption filter 7 IR: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Window glass 10 FG: Synchronization 40 - 110 W/m² Coil run 21 - 57 W/m² Absorption filter 4 IR + 3 window glass: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Absorption filter 6 IR + 1 UV: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Rel. electrical power without XENOSENSIV sensor: continuously regulated to the set value 53 - 120 % Sample chamber temperature: 20 - 70° (depending on selected filter configuration) Black standard temperature: synchronized 25 - 130 °C coiled 25 - 100 °C Relative humidity: 10 % - 95 % Fan revolutions: 500 - 2500 rpm Dimensions: 900 x 780 x 1800 mm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2018, operating hours: 4,730 h, Equipment: all wheel drive, Loading bucket approx. 1.8 m³, hydraulic quick-change system, pallet forks, good condition, vehicle may be wrapped and/or labeled for advertising purposes. Our offer is generally without new technical inspection (TÜV). If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! The vehicle may be wrapped and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. Gkodpfxoxb It Eo Aayef We are pleased to offer you financing or leasing options for this machine. Please contact us!

Condition: used, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21850 Specifications: 2020 model 4908 Hours (I want a little) 1602 Stroke hours (I want a little) Gksdpfexydkkex Aayof Chassis (see pictures) About 14000 kg Winch Remote control Rod shifter Carousel Services performed continuously Vacuum cleaner Light Protective cage Pendant on base Support paws Ready for delivery   Description: We have a 2020 Atlas Epiroc T30 drilling rig for sale. The rig has recently had service and maintenance. Everything works as it should according to the owner. The number of hours will increase slightly as the rig is in weekly operation. Ready for delivery Own weight: 14000 Engine hours: 4908

Condition: excellent (used), Atlas Type: CI3000+ Ci3000+ Weather-Ometer/ Fade-Ometer Model: CI3000W Year of manufacture: 06/2022 Operating time: Device 816.5 hrs. Light duration device 647.4 hrs. Total lamp operation 88.9 hrs. Atlas CI3000+ Xenon Weather-Ometer with calibration case The Ci3000+ Weather-Ometer and the Fade-Ometer with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering instruments. The 3000 series is recognized by many OEMs in the textile, paint, coatings and plastics industries as the exclusive platform for precise, reproducible and repeatable results, reproducible and repeatable life prediction results. The 3000 series is CE, UL, CSA, ISO and EN certified. Key features of this device include: a rotating sample basket to maximize the homogeneity of all samples; customized nozzles for uniform sample front and back spraying; ASTM black plate thermometer or ISO/DIN black standard thermometer for control and monitoring, temperature at sample level to ensure test repeatability. 4500 W water-cooled xenon lamp Total exposure area 2188 cm2 (339 in2) 12-inch TFT full-color touchscreen control panel - display of all test parameters Direct setting and control of black panel (BPT, non-insulated) or black standard (BST, insulated) temperature Direct setting and control of relative humidity Direct setting and control of the air temperature of the sample chamber Display of diagnostic messages 14 factory pre-programmed test methods (Weather-Ometer); 6 factory pre-programmed test methods (Fade-Ometer) Features: Climate type Test type Sunlight simulation Light source with xenon arc lamp Applications: Gksdpjtq Em Eofx Aayef Additives and colorants Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Voltage: 340-415V 43A 50/60Hz 〜3/N/PE 8kW 410 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering instruments. The 3000 series is recognized by many OEMs in the textile, paint, coatings and plastics industries as the exclusive platform for precise, reproducible and repeatable results, reproducible and repeatable life prediction results. Features: Type Climate Test type Sunlight simulation Light source with xenon arc lamp Applications: Additives and colorants Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000 humidification system works with a compressed air ultrasonic spray nozzle. Before entering the system, the compressed air must be passed through a water/oil separator. Gkjdjucd Rbopfx Aaysf The small air regulator in the Cİ3000 contains a second water/oil filter and a 5 micron solid filter. Make sure that a separate oil/water separator is installed and do not rely on the air regulator filter, as this is only designed as an additional device. Compressed air specifications Pressure 80-100 PSI (552-689 kPa) Flow rate 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the C13000 37.5 width X 29 depth X 72" height (95 width X 73 depth X 183cm height) Required footprint: 41.5 width X 80" depth (105 width X 203cm depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz 〜3/N/PE 8 kW 404 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer you a weathering test instrument. Heraeus Atlas Xenotest BETA a universal weathering instrument for testing the light fastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOSENSIV Gear Regulation of the lamp power in W/m² XENOCHROME 320 35-100 W/m² Sample chamber temperature controlled up to 80°C degree Measuring sensors at sample level XENOSENSIV E(300-400 nm) Humidification / Sprinkling Water supply with integrated water tank Gkedpfxeg Dglyj Aaysf Sample chamber temperature: Ambient - 80 °C Black standard temperature: surface - 130 °C Relative humidity: 10 % - 95 % Electronic version: 3/N/PE AC 400V± 10 % 50-60 Hz Mains connection: 32A Power consumption: approx. 12kVA Rated power of xenon lamp 2200VA Power of Xenon lamp 2800VA Rated current 16A Lamp current max. 20A Dimensions: Width 900mm x Depth 1200mm x Height 1800mm. sample area max. 4000cm² Weight: approx. 400kg Type: Heraeus Atlas Xenotest BETA LM Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved). Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a be weathering tester. Atlas Xenotest Alpha LM a universal weathering instrument for testing the fastness to light and weather resistance of materials under normal, high-temperature and high-performance conditions. XENOCHROME filter XENOSENSIV gear Control the lamp power in W / m ² Sample room temperature controlled up to 70 degrees Electronics at sample level XENOSENSIV E(300-400 nm) and SST Stationary samples temperature and relative humidity sensor Humidification Irrigation Water supply with an integrated water tank Electronic version: 230V, 50/60 Hz Absorption filter 7 IR: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Window glass 10 FG: tracking 40-110 W / M ² turn running 21 - 57 W / m ² Absorption filter 4 IR + 3 window glass: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Absorption filter 6 IR + 1 UV: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Rel. electrical power without XENOSENSIV sensor: continuously adjusted to the set value 53-120% Samples ambient temperature:-20-70 ° (depending on selected filters configuration) Gjdpfx Aaod Dtn Uoyokf Black standard temperature: Tracking 25-130 ° C turning barrel 25-100 ° C Relative humidity: 10% - 95% Fan RPM: 500-2500 RPM Dimensions: 900 x 780 x 1800 mm Type: Xenotest Alpha LM high energy Condition: pre-owned / used Scope of delivery: (See image) The unit comes out of an operation. We may more questions like on the phone for you answered

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Gkjdpfx Aasxbd Rasysf Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.