Used Amada Ha 250 for sale (212)

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, overall weight: 17,500 kg, working width: 1,300 mm, working height: 1,300 mm, working range: 1,300 mm, Amada H1300 Horizontal Bandsaw (1982) Capacity 1300 x 1300mm Power 230 V – 50/60 hz / 400 v – 50hz / 460 v 60hz Blade drive 11 kw Hydraulic drive 3.7 kw Coolant drive 0.4 kw Wire brush drive 0.4 kw Blade size 11380mm x thickness 1.6 x width 65 mm Net weight 17.500 kgs Total power requirement 16 kw Machine Data: Model H1300 Year of Construction 1982 Built in Japan Dodpfxotv E Hcj Am Rjch

Condition: excellent (used), Year of construction: 2011, MODEL AMADA TOGU EU PRESCISION TOOL GRINDING MACHINE Djdpfoyyln Tjx Am Rjch WHEEL CBN 150 MAX TOOL DIAMETER 160 MAX GRINDING DEPTH ,ONE CYCLE, 0.99 SPINDLE MOTOR 1.5KW SPINDLE MOTOR SPEED 3000 RPM VERTICAL TRAVERSE 200 MACHINE WEIGT 470 KGS PWOER CONSUMPTION 4.8 KVA

Condition: refurbished (used), Year of construction: 2008, Used AMADA press brake: Illustrative image, machine in stock but not yet prepared. It will be in the same condition once it has been refurbished. Year: 2008 Dcedpfx Amszbg Sbo Roh Type: HFE400-4L Capacity: 4000 x 400T Number of axes: 6 Stroke of cylinders: 350 mm Rapid traverse speed: 100 mm/sec Installation of new, high-tonnage tooling along the entire length Machine completely refurbished upon order.

Condition: refurbished (used), functionality: fully functional, Shear Brand: AMADA PROMECAM Model: GP1230 Capacity: 3000 x 12 Back gauge: 1000 mm Rear pneumatic sheet support Dsdpfx Amsxfbb Rs Roch Cylinder seals replaced – Blades sharpened – In compliance

Condition: good (used), Matrices, 100 mm x 2 Offset punches x 2 In good condition Dcodpfxszaitro Am Rsh

Condition: good (used), Rear back gauge fingers for Promecam press brakes, adjustable in height. Dcedpjzagq Uofx Am Roh Sold as a complete set or in pairs.

Condition: refurbished (used), Year of construction: 1994, machine/vehicle number: HFBO 125 30 H40402, stroke length: 3,000 mm, Fully refurbished in 2019, AMADA PROMECAM 125.3 press brake, year of construction 1994. Excellent Condition. Dcjdpfxey Nibco Am Roh If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2008, Used 6-meter CNC press brake by Amada Type: HFE 400 6 L Capacity: 6100 x 400 tons Stroke: 350 mm Y1, Y2, X1, X2, R1, R2, Z1, and Z2 CNC controlled 9204 operating hours Weight: 36 tons Transport in 2 parts (main frame + separate lower table) Self-adjusting crowning system in the lower table 450 mm mounted on the floor foundation Dismantling and loading included Dcedpfsy T Hltox Am Roh

Condition: excellent (used), Year of construction: 1999, actuation type: hydraulic, working width: 3,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, back gauge speed R-axis: 100 mm/s, power: 5.5 kW (7.48 HP), Equipment: documentation/manual, We offer this very good AMADA PROMECAM GS 630 hydraulic guillotine shear, year of construction 1999. Dcedpfx Amsy Ax N Ns Rsh If you have any questions or need more information, feel free to send us a message or give us a call. CUTTING LENGTH: 3050 MAX THICKNESS MS: 6mm MAX THICKNESS SS: 4mm BACK GUAGE LENGTH: 1000mm BACK GUAGE: PROGRAMMABLE POWER SPEED 100M/PER/MIN MOTOR POWER: 5.5KW

Condition: ready for operation (used), Amada Apelio II 305072 – CNC Turret Punch Press Amada Apelio II 305072 CNC Turret Punch Press | 30T | 1270×3660mm | 58 Station Amada Apelio II 305072 CNC Turret Punch Press in excellent working condition. A proven, high-capacity sheet metal machine ideal for production environments and precision punching jobs. 🔧 Key Specifications: Dcjdpeyz T Dljfx Am Rsh Punching force: 30 Ton Max sheet size: 1270 × 3660 mm (with repositioning) Table size: 1270 × 1830 mm Turret: 58 station (incl. auto-index stations) Max sheet thickness: ~6 mm (mild steel) Control: AMADA / FANUC (model dependent) High-speed stroke rate for efficient production ⚙️ Features: CNC controlled for precision and repeatability Thick turret tooling system Suitable for a wide range of sheet metal applications Reliable AMADA build quality 🏭 Applications: Sheet metal fabrication Enclosures, panels, brackets General engineering production

Condition: used, Year of construction: 1997, cutting diameter / mm saw band length 8800 mm Dodpfsy S D Rqsx Am Rech cutting width / mm total power requirement / kW weight of the machine ca. / t required space / m

Condition: used, Year of construction: 1978, cutting diameter / mm Dedpfx Asy S Drbjm Roch saw band length 8800 mm cutting width / mm total power requirement / kW weight of the machine ca. / t required space / m

Condition: good (used), pressing force: 100 t, total width: 3,000 mm, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operator Year of manufacture: 2007 Long stroke CNC Press brake 8 Axis controlled ASTRO 50Y AMADA Robot ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. When machining medium / fine thick and large dimension parts. Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. Programming has become particularly easy through EASY CAM software Safety CE Fence around machine and tobot Specifications Metric US Standard There are no specifications for this machine (yet). Dsdpevwcduefx Am Rsch Dimensions (estimate) Length 8000mm Width 4000mm Please note: The information on this page is correct to the best of our knowledge and belief, and where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, power: 17 kW (23.11 HP), pressing force: 220 t, stroke length: 180 mm, throat depth: 420 mm, total width: 3,650 mm, total height: 2,900 mm, overall weight: 17,900 kg, Hydraulic press brake Manufacturer: AMADA, Type: HFB 220-30 H Year of manufacture: 1991 Technical data Manufacturer: AMADA Type: HFB 220-30 H Year of manufacture: 1991 Press force: 220 tons Bending length: 3100 mm Stroke: max. 180 mm Overhang: 420 mm Distance between side supports: 2750 mm Dodoy T R Ryjpfx Am Roch Power: 17 kW Dimensions: L 3,65 m, W 1700 mm, H 2900 mm Weight: 12.9 t Equipment • Delem DA 58 2-D graphics control system • Controlled axes: Y1, Y2, X, R1, R2, Z • Large tool package, see photos • Amada quick-release tool clamping system All information is provided without warranty. A live demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 4,937 h, pressing force: 102 t, overall weight: 7,200 kg, number of axes: 8, This 8s AMADA HRB 1003 press brake was manufactured in 2023. It features a press force of 1000 kN and a stroke of 250 mm, making it suitable for various applications. With a weight of 7200 kg and a control system of AMNC3i with Lite Mode, it offers advanced capabilities. Consider the opportunity to buy this AMADA HRB 1003 press brake. Contact us for further details. • Stroke: 250 mm • Voltage: 400 / 415 V • Frequency: 50 Hz • Phases: 3 • Installed power: 18.6 kW Dcodpfx Ajyk Dc Nsm Reh • Full load current: 29.8 A • Noise level: 72 dB(A) • Press beam length: 3110 mm • Opening width: 520 mm • Axes: 7 programmable • Control: AMNC3i with Lite Mode • Configuration: Without crowning • Tool clamping: S-GRIP DUOTools available:3 Amada punches no. 831206, 835 mm long, and 1 split version 3 Amada punches no. 820806, 835 mm long, and 1 split version Plus dies: 3 pieces V 16 / H 120 / 85° x 835 mm long and 1 piece split design 2 pieces V 16 / H 120 / 88° x 835 mm long 3 pieces V 32 / 85° x 835 mm long and 1 piece split design 3 pieces V 8 / V 12 / 88° x 835 mm long and 1 piece split design 3 pieces V 16 / V 25 / 88° x 835 mm long and 1 piece split design 3 pieces V 8 / V 12 / 30° x 835 mm long and 1 piece split design

Year of construction: 2005, operating hours: 14,300 h, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, controller manufacturer: AMADA, controller model: AMNC-F (FANUC 180i-PB), overall weight: 18,000 kg, total height: 2,318 mm, punching force: 20 t, product length (max.): 5,526 mm, sheet thickness (max.): 3 mm, table width: 5,120 mm, number of axes: 5, This 5-axis AMADA EM 2510NT turret punch press was manufactured in 2005. It features a punching force of 200 kN, a turret capacity of 45 stations, and a maximum sheet size of 1270 × 5000 mm. The machine has a rapid traverse speed of 100 m/min on the X-axis and 80 m/min on the Y-axis. If you are looking to get high-quality punching capabilities, consider the AMADA EM 2510NT machine we have for sale. Contact us for further details. • X-axis rapid traverse: 100 m/min • Y-axis rapid traverse: 80 m/min • Maximum sheet size: 1270 × 5000 mm • Maximum material thickness: 3.2 mm mild steel • Maximum sheet weight: 50 kg (feed speed F1) / 150 kg (feed speed F4) • Positioning accuracy: ±0.07 mm • Turret capacity: 45 stations • Turret rotation speed: 30 rpm • Punching force: 200 kN • Hits per minute – 1 mm pitch (5 mm stroke): 780 hits/min • Hits per minute – 25.4 mm pitch, X-axis: 500 hits/min • Hits per minute – 25.4 mm pitch, Y-axis: 330 hits/min • Maximum stroke length: 37 mm • Connected load: 27 kVA • Air consumption – machine: 250 l/min • Air consumption – Air Jet vacuum: 250 l/min • Operating air pressure: 5 bar Dcjdpfx Amey S A Tko Roh • Tooling visible in the photos • 4 tool cabinets • Technical documentation (manual scan) • Machine + included tooling package shown in the photos • Machine fully operational: Yes (replacement of one pneumatic hose required to eliminate a minor air leak) • Machine connected to power: Yes

Condition: ready for operation (used), tool grinding machine working perfectly Djdpeyw N D Tofx Am Rjch

Condition: excellent (used), Year of construction: 2008, Technical data: Working length: 6100 mm Distance between columns: 5230 mm Press force: 400 tons CNC control: OPERATOR II graphic TFT screen 14" Number of controlled axes: 8 Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Stroke: 350 mm Overhang: 420 mm Motor power: 38.5 kW CE marking Dimensions (length x width x height): approx. 6300 x 2500 x 3600 mm Weight: approx. 36.5 tons Note: Table extends approximately 450 mm into the floor. Accessories: 1 set of tools: 1 upper tool punch: 120 mm Dcjdpfxey D Sb Us Am Rjh 1 segmented die: V50, V35, V22, V16 Condition: Very good condition Only 9,200 operating hours In the meantime, we have stored the machine and removed the table. The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are in accordance with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1991, Press brake Manufacturer: AMADA PROMECAM Type: HFB 125/40 Year of manufacture: 1991 Control: DELEM DA 58 Maximum pressing force: 1,250 kg Maximum stroke: 180 mm Sheet metal thickness: 8 mm Working width/Throat: 3.7 m Number of phases: 3 Dcsdpfxox Tzl Ij Am Reh Power consumption: 11 kW Voltage/Frequency: 380/50 Rated current: 24 Weight: 9,900 kg ä3626 Availability: immediate

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Dcedpjza E S Djfx Am Reh

Condition: used, Year of construction: 1986, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 204 t, stroke length: 220 mm, table length: 4,000 mm, clearance between the columns: 3,400 mm, overall weight: 12,000 kg, We offer this used PROMECAM Amada STPC 204 200 40 160 press brake, manufactured in 1986. Machine number: STPC 200 40 160 Maximum pressing force: 2,040 kN Maximum stroke: 220 mm Voltage: 380 V Frequency: 50 Hz Date of manufacture: 20.10.86 Bending length: 4 m Distance between uprights: 3.4 m Includes tooling! Machine weight: approx. 12 tons Dodpfxjy Tmlae Am Roch Equipped with CYBELEC DNC 7000 control A crane is available for loading. The machine is functional and still in use / can be tested while powered on. However, due to its age, we cannot offer any warranty. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2018, laser power: 3,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, total height: 5,170 mm, number of axes: 3, This 3-axis AMADA ENSIS 3015 AJ fiber laser cutting machine was manufactured in 2018. It features a powerful 3000 W fiber laser and a travel range of 3070 x 1550 mm. The machine includes a nozzle changer with 16 stations and a water chiller for efficient cooling. If you are looking to get high-quality cutting capabilities, consider the AMADA ENSIS 3015 AJ machine we have for sale. Contact us for further details. • Laser power (oscillator plate): 3.15 kW • Control unit: AMNC 3i (21.5" screen) • Power required: 10.4 kVA • Voltage: 200V AC (3-phase) • Frequency: 50/60 Hz • Mass of machine: 400 kg (oscillator unit) • Nozzle changer: 16 stations Additional equipment • Automation: AMADA ASF 3015 S (ASF EU automation) • Total pallets: 12 (including cutting pallets) • Cutting pallets: 2 • Raw material pallets: 7 • Unloading pallets: 3 • Max. sheet weight: 920 kg • Max. load capacity per pallet: 3000 kg • Max. sheet dimensions: 3050 x 1550 mm • Min. sheet dimensions: 2000 x 1000 mm • Sheet thickness (auto mode): 0.8–25 mm • Machine height: 5.3 m • Electrical connection: 3 x 400V AC + N + PE / 40A • Compressed air: 6 bar, 1000 l/min • Features: 2nd unloading station included, hinge belt conveyor SRF 063 for scrap transport • X-direction conveyor • Cooling system: Water chiller VBOXX 15B • Extraction system: Dust collector DC1500/8/9 SB • ADSS Basic • Water assist cutting system • Profibus for loading/unloading Dsdpfx Aey N U Aljm Rech • Water demineralizer: Type S & Type B5 • Included software: VPSS3i Blank Solution Pack

Condition: good (used), functionality: fully functional, Press brake AMADA HFP220-4S Type: HFP Number of axes: 8 Touchscreen CNC: AMNC Backgauge stroke: 680 mm Working speed: 200 mm/sec Safety light barrier Sold without tooling Dsdpfx Ameytb Rcs Rech Machine is fully functional

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, control type: CNC control, actuation type: hydraulic, controller manufacturer: Amada, sheet thickness (max.): 6 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Amada GX 630 +SE30 +STACKER FULL OPTIONS Shear GX630 Dcedpfxoy Sbu Ho Am Rsh Discharge conveyor + lift system + scrap bin SE30 Constant level stacker ENC 30 This Amada guillotine shear comes equipped with a combined discharge conveyor, lift system, and scrap bin. At the rear, it features an original Amada discharge conveyor with material stacker. The system is frequency-controlled and maintains a constant drop height for material stacking. The machine is in very good condition and has only been used for thin sheet material. All documentation and service reports are available. Machine specifications: Cutting length: 3050 mm Max. thickness: 6 mm steel Control: Amada Automatic cutting angle adjustment Automatic cutting gap adjustment Backgauge: 1000 mm Lift system: pneumatic Dimensions (L x W x H): 3790 x 2230 x 1860 mm Weight: 6150 kg

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 4,000 rpm, travel distance X-axis: 245 mm, travel distance Z-axis: 210 mm, spindle motor power: 7,500 W, number of axes: 6, This 6-axis AMADA Wasino JJ3 was manufactured in 2007. It features a twin spindle, twin turret turning cell with a maximum spindle speed of 4000 rpm and a chuck size of 8”. The machine is designed for high-volume production with automatic loading and unloading capabilities. If you are looking to get high-quality turning capabilities, consider the AMADA Wasino JJ3 horizontal turning machine we have for sale. Contact us for further details. • Axes: X1, Z1, C1, X2, Z2, C2 • Travels: X1/X2 245 mm; Z1/Z2 210 mm • Spindles: 2 (double front spindle), max speed 4000 rpm, power 7.5 kW (option 11 kW), high-acceleration spindle • Turrets: 2 × 12 stations • Chuck size: 8" (3-jaw, both spindles) • Bed: High rigidity monoblock design • Cutting performance: • Turning (S45C): depth of cut 1.6 mm; feed 0.22 mm/rev; cutting speed 160 m/min • Drilling: Ø22 mm; feed 0.56 mm/rev • Tapping: M16 • Grooving: up to 8 mm • Precision: positioning accuracy ±2 µm; repeatability ±2 µm • Coolant/system: 290 L tank; filtration; high-pressure coolant pump • Cell concept/capability: automatic loading/unloading; fully automated; designed for unmanned, high-volume production • Driven tools: Yes, for both spindles • Condition: Good, properly working; regular maintenance since 2008 Additional equipment • Gantry loader with reverse turn unit Dsdpey Ndu Djfx Am Rech • Work stocker: 2 units (expandable to 4) • Chip conveyor • Transformer • Integrated measuring unit (optional concept) • Cleaning unit (optional concept) Technical Specification Counter Spindle Yes Driven Tools Yes