Used Aluminium for sale (2,144)

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity Hjdov Iccfepfx Aicofk • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Condition: new, Year of construction: 2026, Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). Hodpfjl Sm Hqox Aicefk • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture Model: A700 Length: 4.5 m Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-medium aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Windows and doors manufacture Hjdpfof Eh Hdex Aicofk • Commercial office manufacture • Data centres manufacture • Linear lighting manufacture • Blinds and shades manufacture • Composites manufacture Model: A420 Length: 6 m Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-medium aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Windows and doors manufacture • Commercial office manufacture • Data centres manufacture • Linear lighting manufacture • Blinds and shades manufacture • Composites manufacture Model: A420 Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Hfedpfx Aijf Eh Hwscek Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). Hfjdpfx Aisl Smt Escek • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 6 m Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture Hfsdpfxjl Smube Aicok • Aluminium retail sales Model: A550 Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). Hfedpfxomdqwhe Aicjk Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture Model: A700 Length: 6 m Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 3 m Material Length: 1680 mm Pushing capacity: 20 - 40 kg Hedpfjl Smldjx Aicsfk Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Bulk aluminium manufacture Hfsdpfx Ael Sm Eljicek • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture Model: A700 Length: 3 m Material Length: 1680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Supercharge your aluminium cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the aluminium size you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light Hfedpfxomb U Tfe Aicek • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. Hfjdpfxemb U Tue Aicek • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Hsdpof Eknnsfx Aicofk Model: A550 Length: 9 m Linear Unit: ProfiStop Alpha Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, Tipping ram: Hyva, chrome-plated tipping ram matel - stroke 7100 mm - tipping warning signal, connection: 1" hydraulic connection with thread and hydraulic hose: 2.2 m long with 1" (inch) screw connection - female! Cranked aluminum chassis, aluminum body with tunnel, steel support legs, SAF off-road axles, 1st axle lift axle, 6x 385/65 R22.5 Bridgestone RT tyres, 1 towing hitch, round LED rear lights, 2+1, quick-release tarpaulin lock. Toolbox, removable step ladder, 2 shovel holders (outside), 25L water tank, ASW in front cargo area, pneum. Vibrators at the front of the floor with control valve on the left side, grain bunker with brackets on each grain chute lBin smooth side walls - Double-walled longitudinal hollow chamber profiles - Vertical gradient inner thickness (3 mm at half height) - Inner length 9.50 m - Inner usable height 2200 mm - Inwardly beveled top chord profiles, floor trough with tunnel - Floor thickness 5mm, Inside usable width (mm) 2410, floor reinforcement struts - Doubling of the top chord profiles - Front wall 14° sloping front wall - Thickness 4mm - Conical recess and reduced to 450mm interior space Door Universal door - Double linkage locks - Folding upper crossbar - 2 door leaves - 1 grain slider with protective cover in each leaf - Rubber seal on the leaves and on the rigid frame, Door wing type Smooth-walled door wings Continuous welds on the inside of the door, roller tarpaulin system - White transparent strips - Side tensioning straps - Round aluminum roof bows (100mm spread) - Rounded upper part, hinged, adjustable, removable, foldable on the side - Aluminum forged MULTIFUNCTION Tarpaulin stops (straight - offset - foldable), Tarpaulin pole Yes Half locking bar - Door lock Pneumatic automatic unlocking of the swing frame with 4 hooks Upper door hinge Swing flap upper aluminum Double ratchet - Removable Integrated in the side wall height Grain pusher Right & left (aluminum) Hfodsrt N Sfopfx Aicjk

Condition: good (used), Aluminum plate aluminum 252 x 128 x 6cm workbench worktop Hfsdpfxeiu Uzuo Aicjk Heavy aluminum plate -37- Aluminum 252 x 128 x 6cm Workbench worktop. More items - new and used - you will find in our store! International shipping costs on request!

Condition: new, Available from stock in various versions! Suitable, for example, for machines from Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom, etc. For installation on aluminium circular saws, ideally suited for double mitre saws and automatic sawing systems. Power output 2.2 or 3.0 kW, with or without remote start feature. 160 litre removable container. 2 extraction ports. Mobile, with 2 lockable rollers. Hoses, connectors, and reducers available to suit your requirements. Hfsdpfx Aijwczfascjk

Condition: new, functionality: fully functional, empty load weight: 122 kg, maximum load weight: 627 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,006 mm, loading space width: 1,256 mm, tire size: 155/70 R13, color: grey, Year of construction: 2024, Anhänger 200x125 UNITRAILER GARDEN 201 KIPP mit BIS-Seitenwänden und Aluminiumabdeckung Kippanhänger mit neigbarer Deichsel. Modell Garden Trailer 201 Kipp Ersatzrad mit Halterung optional Hodpsuk Ha Nsfx Aicjfk Wo befinden sich die Räder außerhalb des Laderaums Art der Aufhängung ungebremste Achse bis 750 kg Gebremst nein Bordwände Stahl Art der Ladefläche aus Siebdruckbodenplatte Verwendung Umzüge, innerbetrieblicher Warentransport Steckerart 7-polig, Möglichkeit der Verwendung eines Adaptersteckers 13 auf 7-polig Rückfahrlicht Nein Der Anhänger ist mit BIS-Seitenwänden ausgestattet, die die Ladefläche zusätzlich vergrößern. Aluminiumabdeckung für den Anhänger ALU-Abdeckung für den KIPP-Anhänger UNITRAILER GARDEN TRAILER 201 aus leichtem und langlebigem Aluminium. An den Seiten ist die Struktur zusätzlich verstärkt, was trotz der großen Abmessungen für eine ausreichende Steifigkeit sorgt. Das geringe Gewicht der Abdeckung beträgt nur 50,03 kg und mindert nicht die Belastbarkeit des Anhängers. Ein lohnenswertes Element sind die oberen Schienen, auf denen Sie einen Dachträger oder einen Fahrradträger platzieren können und so Platz für den Transport verschiedener Arten von Gegenständen schaffen. Zum Set mit der ALU-Abdeckung gehören auch seitlich angebrachte Betätigungselemente , mit denen wir die Abdeckung einfach und ohne großen Kraftaufwand öffnen und schließen können. Das Produkt ist mit einem Schlüsselschloss ausgestattet, das zum Schutz der Ware vor Diebstahl beiträgt. Die Außenmaße der Abdeckung betragen: 2155x1347 mm. Die V-förmig neigbare Deichsel kann jederzeit unter den Anhängerboden geklappt werden. SEITEN - alle Seiten aus verzinktem Stahl. Die Rückwand öffnet sich. Ein leichter Anhänger mit 2 Jahren Garantie. Lieferung direkt an den angegebenen Ort.

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Manufacturer – Offshell Services Ltd. ✅ Model – The Offshell Press MK V (Peeler). ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Hfjdjxuhw Dopfx Aicsk Decommissioned and packed for transport

Condition: used, empty load weight: 8,798 kg, maximum load weight: 30,202 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2019, next inspection (TÜV): 01/2027, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,600 mm, loading space volume: 86 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,600 mm, color: white, Year of construction: 2019, Equipment: ABS, tail-lift, Tare weight: 8798kg, GVW: 39000kg, Loading area (L W H): 13,410 mm x 2,490 mm x 2,600 mmTyre size: 385/65 R22.5, Loading area volume: 86 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Taillift: Dhollandia 2T - Steel/ALU platf. 1700 x 2400 - flashing warning lights on tail lift platform., Electronic Brake System EBS, Ferry lashings, Temperature recorder: Euroscan - with printer, Hubodometer, 1x15 and 2x7 pin plug, Antispray, 2 Rows of recessed loadlock. Aluminium floor., Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Hsdpfxozr Rzas Aicsfk

Condition: used, Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 40 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor.  Type of Machine: Butter Packaging Machine Capacity: ± 600 Kg/h Butter Brick Dimensions: 125mm length x 55mm width x 40 mm height Hfodpfezhlmijx Aicok Weight: 250 grams Machine Weight: 840 kg Packaging type: Aluminium and Parchment Paper Motor power: 1,5 kW

Condition: good (used), mileage: 238,004 km, power: 120 kW (163.15 HP), first registration: 11/2016, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, total length: 7,000 mm, total width: 2,220 mm, total height: 3,200 mm, loading space length: 4,200 mm, loading space width: 2,100 mm, loading space height: 2,250 mm, Year of construction: 2016, Equipment: ABS, Bluetooth, central locking, electric window regulation, power mirror, tail-lift, traction control, = Additional options and accessories = - Heated mirrors - Halogen lamp - Tail lift - Manual - Radio/cassette - Fabric upholstery = Remarks = Configuration: 4x2, Payload: 343 kg, Unladen weight: 3,157 kg, Gross weight: 3,500 kg, Cab type: Single cab, Number of airbags: 1, Parking assistance: rear, Electric windows, Electric mirrors, Radio/cassette, Colour: White, Heated mirrors, Lighting type: Halogen lamp, Bluetooth, Engine power: 120 kW (161 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission: Automatic, Power steering, ABS, ASR (traction control), Starter battery, Body type: additionally raised and extended, Sidewall interior covered, Side doors: 1, Central locking, Seats: 2, Seat configuration: 1+1, Upholstery: fabric, Seat adjustment: manual, Cooling engine manufacturer: Thermoking, Cooling engine model: V_200 max, Cooling engine: Compressor / electric, Cooling type: cooling, Tail lift, Tail lift type: rear flap, Tail lift capacity: 750 kg, Tail lift manufacturer: Dhollandia, Tail lift material: steel and aluminium, Tail lift dimensions: 218x160, Spare wheel, Spare wheel tread: 2%, Tyre type: all-season tyres = Further information = General information Number of doors: 1 Registration number: KLEYN1 Axle configuration Tyre size: 235/65R16 Brakes: disc brakes Suspension: leaf spring Axle 1: Tyre tread left: 4 mm; Tyre tread right: 8 mm Axle 2: Tyre tread left: 2 mm; Tyre tread right: 2 mm Weights Hsdpfx Aisyylcqocsfk Unladen weight: 3,157 kg Payload: 343 kg Gross vehicle weight: 3,500 kg Functional Tail lift: Dhollandia, rear flap, 750 kg Loading platform height: 80 cm Cooling engine: engine-driven Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2

Condition: excellent (used), Year of construction: 2021, Ref:11122 . 2021 & 2020 SIAT XL-461 Box Taping Machines. A pair of semi-automatic sealing machines with random adjustment. Meaning the machines are able to adjust themselves according to the different box dimensions. They apply automatically a 'C; strip of adhesive tape to the top & bottom of the box. Specification of each machine: Drive belt speed: 20m/min. 2 x motors kW 0.13 2 x K12R taping unit - 75 mm width Aluminium telescopic legs with millimetric guide Adjustable working height: 445 - 705 mm Locked stop emergency button On/Off magneto-thermic switch Adjustable descending height of the taping unit Top head pneumatic pressure regulators. Hedpfx Aijzmx Hyecsfk

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,507 kg, axle configuration: 3 axles, first registration: 08/2019, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - Schmitz Rotos Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 45 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Double deck with 22 beams Loading capacity 33 euro paletts Length/width/heigth - 1340cm / 249cm / 265 cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 7 mm Front right - 7 mm Middle left - 5 mm Middle right - 5 mm Rear left - 11 mm Hfjdpfxjzul Nde Aicek Rear right - 10 mm

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 06/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels Spare wheel (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Hsdjzui S Nspfx Aicefk TrailerConnect S.KO COOL country package wave 3 Tyres Information Front left - 7 mm Front right - 7 mm Middle left - 6 mm Middle right - 8 mm Rear left - 8 mm Rear right - 8 mm

Condition: used, functionality: fully functional, mileage: 332,965 km, power: 338 kW (459.55 HP), first registration: 01/2024, fuel type: diesel, overall weight: 8,253 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Adaptive Cruise Control. Cabin: CR (air comfort suspension). Batteries 210 Ah (rear position). Engine DC13 175 L01 460 hp EURO 6. Gearbox: G33CM1 Advanced Emergency Braking AEBS Driver attention support Side Collision Avoidance Support Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper width 800mm. Bed lower 800 mm, fixed Night heater WTA cab heater 3kW. Storage rear lower, driver side - refrigerator. Technical specifications Tachograph smart ADR Continental. Front tyres 315/70R22.5. Rear tyres 315/70R22.5. Fifth wheel Jost JSK37C-Z, height 150 mm Fuel volume left side 825 dm3. Fuel volume right side 395 dm3. AdBlue tank capacity 150 l, right Fuel tank material aluminium. Speed limitation legal 90 km/h. Technology FMS, Fleet Management System preparation Gateway Exterior Headlamps LED (automatic). Daytime running light function LED and position lamps. Fog lamp front type Roof air deflector adjustable Hfjdpfxozub Tls Aicsk Door window air deflector Tyres Information Front left - 13 mm Front right - 13 mm Rear left inner - 16 mm Rear left outer - 14 mm Rear right inner - 16 mm Rear right outer - 15 mm

Year of construction: 2012, condition: used, Elumatec AF 222 End Milling Machine, the Machine Transoms & Door Profiles in Aluminium or Plastic, Cutting Range up to 400mm, Tool Diameter up to 280mm. S/No. 2220025315 (2012). Country of Origin: Germany Location: These lots are located in Burton-on-Trent, UK. Please see individual lot for loading information and charges. Hfjdezqdw Eopfx Aicek