Used Af 222 for sale (2,813)

Condition: used, mileage: 22,000 km, power: 121 kW (164.51 HP), first registration: 05/1994, overall weight: 7,490 kg, fuel type: diesel, color: red, next inspection (TÜV): 08/2026, gearing type: mechanical, emission class: euro1, loading space width: 2,500 mm, loading space length: 4,000 mm, loading space height: 1,640 mm, Year of construction: 1994, total length: 5,950 mm, total width: 2,500 mm, total height: 2,960 mm, number of seats: 3, Equipment: ABS, all wheel drive, 1st owner. Original 22,000 total kilometers, with complete documentation of the vehicle's history and TÜV (German vehicle inspection) reports. German fire department vehicle, in service until the end of 2020, then transferred internally in 2021 to the parks and recreation department and occasionally used as a watering truck in the cemetery. The vehicle is still largely an original fire truck; only the emergency lights, siren, and loudspeaker have been removed. In 2021, the vehicle's registration was changed, and it was subsequently registered as a "closed box truck" for civilian use. A "reversion to truck status" was carried out, including a reduction in the permissible total weight to 7490 kg, so that the 917 AF can now be driven directly with the old Class III driver's license. During the corresponding weighing process, a tare weight of 6040 kg was recorded in 2021 (the weighing certificate is available). The reduction in weight to 7.49 tons is correctly recorded in the vehicle documents, and the tare weight is classified as "5970-6115 kg" there. The vehicle was originally a TLF 16/24-Tr (tank fire engine) and was last classified as a "TLF 3000" in accordance with the new standards. A 2420-liter fire water tank is installed (original). In the currently reduced weight state, the water tank must no longer be filled completely if the vehicle is driven on public roads. The superstructure is from ZIEGLER, manufactured in 1994, and a fire pump FP 16/8 is located at the rear (265 operating hours according to the meter). The tires, size 9R22.5, are in good condition, DOT 2013 with good tread. A complete spare wheel is included. Six-cylinder in-line diesel engine with 5958 ccm and 165 hp. 5-speed manual transmission. 90 km/h maximum speed is recorded. Leaf-sprung, robust municipal chassis for heavy terrain. Short wheelbase 3150 mm. 2 differential locks + off-road reduction + power take-off. ABS (switchable via push button). Small Rockinger trailer hitch TK226A with 2000 kg braked and 1500 kg unbraked trailer load. Support load for disaster relief trailers according to the type plate is a maximum of 80 kg. Power steering. 3 seats. Driver's seat = ISRI comfort seat. Fog lights. Steel front bumper with recovery shackles. Overall vehicle dimensions: Length 5.95 m / Width 2.50 m / Height 2.96 m. Fodpfs Adwhujx Aikepp Superstructure dimensions (external dimensions of the main body): 4.00 m long / 2.50 m wide / 1.64 m high. The vehicle is fully operational, the last TÜV inspection was carried out at 22,101 km with no defects and expired on 08/2026. Until 14.10.2026, this 917 AF was regularly approved for road traffic. No immediate defects are known for a new main inspection, but the vehicle has been used very little in recent years and, unfortunately, has not been maintained as well as it apparently was during its time with the fire department. Overall, the condition is still quite good. The truck has also been regularly moved around the depot over the years to this day. The LK 917 AF requires maintenance soon, preferably a thorough inspection. Accordingly, the 917 AF is offered here at a reduced purchase price so that the car remains attractive for export. A TÜV inspection by us is therefore not planned, as the price would be much higher with a TÜV inspection. The right buyer will certainly understand our clear and openly communicated approach, all others should simply buy another car and save everyone involved from unnecessary discussions.

Year of construction: 2023, condition: excellent (used), Number of NC axes: 4 X-axis: 7200 mm Maximum tool length: 190 mm Number of tool positions in the tool magazine: 12 Number of clamping mandrels: 8 Number of fixed stops for profiling: 4 Clamping block positioning: Automatic Maximum profiling height: 300 mm Motor power: 7.5 Fjdpfx Aozycltsikspp A-axis: +/-90° continuous

Condition: used, mileage: 33,000 km, power: 159 kW (216.18 HP), first registration: 12/1986, fuel type: diesel, empty load weight: 8,100 kg, maximum load weight: 5,400 kg, overall weight: 13,500 kg, tire size: 10R22.5, axle configuration: 4x4, wheelbase: 3,600 mm, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 6, Equipment: all wheel drive, cabin, differential lock, fog lights, parking heater, trailer coupling, Vehicle location: Bovenden, Doka. Features: 1 air suspension seat, 5-speed manual transmission, auxiliary drive, differential lock, fog lights, storage compartment, leaf spring suspension, trailer hitch. Fjdpfxok D Smbj Aikopp Wheelbase: 3600 mm. Body: Tank fire engine TLF16/25 with a body manufactured by Bachert, 2500-liter water tank & built-in pump FP 16/8. Body length approx. 3700 mm! Spare wheel available for an extra charge! Sale to businesses or for export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Year of construction: 2013, condition: like new (used), functionality: fully functional, Trepko 222-1K rotary filling machine whit 2x moulds. Previously filling yoghurt products and other dairy products. Mould No 1. Diameter 185 mm No 2. 90 mm. Year of construction 2013. Fpjdpoydplcofx Aikop

Condition: excellent (used), Year of construction: 1962, functionality: fully functional, pressing force: 200 t, stroke length: 800 mm, table width: 970 mm, table length: 1,600 mm, year of last overhaul: 2022, die cushion force: 40 t, Equipment: safety light barrier, Lasco FP 222 S press Fpjdpfxov E Efds Aiksp A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, mileage: 19,716 km, power: 136 kW (184.91 HP), first registration: 06/2007, fuel type: diesel, tire size: 315 / 60 / R22.5, axle configuration: 4x2, fuel: diesel, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 4, suspension: steel, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 25,000 kg, Technical information Number of cylinders: 6 Transmission Transmission: Allison, 4 gears, Automatic Axle configuration Fjdpe Adp Hvsfx Aikepp Tyre size: 315 / 60 / R22.5 Make axles: Terberg Brakes: drum brakes Suspension: leaf suspension Front axle: Max. axle load: 10000 kg; Steering; Tyre profile left: 5%; Tyre profile right: 5% Rear axle: Double wheels; Max. axle load: 25000 kg; Tyre profile left inner: 20%; Tyre profile left outer: 20%; Tyre profile right outer: 20%; Tyre profile right outer: 20%; Reduction: hub reduction Interior Interior: grey History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Number of keys: 1 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, Year of construction: 2010, functionality: fully functional, grinding spindle speed: 8,000 rpm, grinding spindle motor power: 12 W, Machine in functional condition and can be under power and tested. Fpodpfxez Ea Hpe Aiksp

Condition: ready for operation (used), Siemens 1FT5064-0AF01-1 - Z permanent magnet motor SN BT928858822290 Z = brake (G45) and encoder system (G44), used, minor signs of wear, 100% functional, scope of delivery as per photos, Z see type plate Fpedpfx Aiotw I Suekop

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply Fjdpeywuczefx Aikepp  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: ready for operation (used), functionality: fully functional, CNC FLOOR TYPE BORING MACHINE MAKE TITAN MOD. AF 150 SPINDLE SIZE 150MM, ISO 50 X TRAVEL 3000MM Y TRAVEL 2000MM W TRAVEL 800MM ROTARY TABLE 2000 X 1700 MM ROTRARY TABLE TRAVEL 1000MM Fpjdpoztq Ayofx Aikjp LOADING CAPACITY ON TABLE 15 TON CNC NUM

Year of construction: 2020, condition: used, functionality: fully functional, BioAir SafeMate ECO 1.8 Class II Biological Safety Cabinet – 1.8m Laboratory Workstation Manufacturer: BioAir Model: SafeMate ECO 1.8 Equipment type: Class II Microbiological Safety Cabinet Nominal size: 1.8 m Condition: Used Location: Ireland Quantity Available: 2 Fodpfx Aioz I Dmrekspp Description: Available for sale is a BioAir SafeMate ECO 1.8 Class II microbiological safety cabinet, designed for laboratory applications requiring controlled airflow and biological particulate containment. The SafeMate ECO series features an electrically operated sliding front safety window, stainless steel internal work surfaces and HEPA filtration. The cabinet is designed to provide a controlled working environment for appropriate microbiological laboratory procedures, subject to correct installation, maintenance and certification. With a spacious 1.8 m working width, this unit is suitable for laboratories requiring a larger working area for research and routine laboratory operations. Key Features Class II microbiological safety cabinet. Large 1.8 m cabinet configuration. Stainless steel internal working area. Electrically operated sliding front window. HEPA filtration system. Designed for controlled airflow and biological containment. Suitable for research, biotechnology and pharmaceutical laboratory environments. Designed for laboratory workflows requiring a controlled working environment. Keywords: BioAir SafeMate ECO, SafeMate ECO 1.8, biological safety cabinet, Class II biosafety cabinet, Type A2 cabinet, microbiological safety cabinet, HEPA filtration, laboratory equipment, pharmaceutical laboratory, biotechnology equipment, microbiology laboratory, scientific equipment, 1800mm safety cabinet

Condition: new, Siemens 1FT6041-4AF71-4EH6 synchronous servo motor SN:YFW712222302002, unused in opened original packaging, 100% functional, scope of delivery as per photos Fsdpeuyrb Sjfx Aikepp

Condition: ready for operation (used), mileage: 26,000 km, first registration: 05/1219, fuel type: diesel, axle configuration: 4x4, Year of construction: 1996, Mercedes-Benz 1634 AF fire engine 7 seats All-wheel drive with gear reduction, rear lock Tank 2800 liters Godiva pump with 3200 l / min at 8 bar Quick start right and left Mobile roof turret Tires: 275 / 70R22.5 Wheelbase: 3'600 mm Vehicle length: 7'100 mm Vehicle width: 2'450 mm Vehicle height: 3'100 mm Fedpfx Asr Iyc Ueikspp Body length: 3'800 mm

Condition: used, mileage: 113,141 km, power: 177 kW (240.65 HP), first registration: 12/1995, overall weight: 13,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, Year of construction: 1995, total length: 7,400 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, all wheel drive, +++ Extremely clean vehicle +++ Immediately ready for operation Water tank 1600 l, rear-mounted pump FP 16/8, mechanical lighting mast, All-wheel drive 4x4 with 2x differential locks, center and rear, ABS Tires completely renewed in 2025 (DOT 3424) Fpsdpfx Aioz Amnqjkop Fresh inspection including lubrication and a new fuel filter as well as a new air dryer cartridge will be carried out (status as of today) The engine runs smoothly and the gearbox is easy to shift; the transfer trip was without problems. Maximum speed = 92 km/h according to the vehicle documents. +++ Errors, changes, and prior sale are subject to confirmation.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Manufacturer: Bacciotini Machine Type: Pit Stop AF Speed Max. Sheet Size: 50 x 85 cm Min. Sheet Size: 10 x 15 cm Year of Manufacture: 2009 Status: available Condition: Good Fedpfx Aijzrtyrekjpp Available: Immediately

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, ELECTRO-HYDRAULIC PANEL PRESS WITH OIL BOILER, MOTORIZED FEED, INFEED & OUTFEED TABLES Brand: ORMA Model: LS 25/13 AF BO Serial No.: 69440202 Year: 2002 (Photos taken before overhaul, functional tests & cleaning) Press specifically designed for manufacturing solid wood laminated panels using special adhesives. SPECIFICATIONS: - Heated platens 2500x1300mm by oil circulation at 120°C Opening height (usable stroke): 200 mm Maximum vertical platen pressure: 80 tons (2.5 kg/cm²) Maximum vertical pressure of front cylinders: 40 tons (25 kg/cm²) - Horizontal pressing stroke: 150 mm Adjustable working thickness: 12 to 50 mm Horizontal pressure: 7.5 tons (7 to 10 kg/cm²) CONFIGURATION: - Heavy-duty steel frame - Motorized infeed table 2.50x1.40m with rack-and-pinion pusher - Hydraulic power units 3x 2 HP - Control panel with 2 foot pedals; adjustment for feed/horizontal & vertical working pressure/working temperature/pressing time Pressure gauges for: platen pressure, pusher stop, and locking presser - Mobile lower platen with aluminum surfaces 6 hydraulic cylinders Ø70mm with 4 rack-and-pinion balancing guides - Heated upper/lower circuits (internal coil) 24kW electric boiler with 1.1kW circulation pump - Independent rear locking presser with 3 hydraulic cylinders Ø70mm, double rack guides - Lateral pressers 5 hydraulic cylinders Ø40mm Adjustable feet 70x120mm (height adjustable) - Outfeed roller table length 1.25m - Complete electrical cabinet with all controls Fjdpfxowxdcte Aikspp - Power supply: 400V, three-phase 50Hz, IN 44A Installed power: 32kW - CE marking Lockable main switch, emergency stop button Emergency stop cable Safety guards Transport dimensions (LxWxH): 3.50x2.40xh.2.00m + 2.40x1.80xh.1.80m (as delivered, packed) Weight: 6200kg + tables

Condition: used, mileage: 23,938 km, power: 125 kW (169.95 HP), first registration: 12/1992, overall weight: 9,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,500 mm, total length: 6,300 mm, total width: 2,500 mm, total height: 3,000 mm, Equipment: ABS, all wheel drive, parking heater, Clean vehicle from first owner – fully serviced with complete service records / folder with documents and operating manuals available. 4x4 all-wheel drive with off-road gear reduction. 2x differential lock (center and rear axle). ABS, heated mirrors, fog lights. Ziegler superstructure with 800l water tank. Ziegler FP 8/8 rear pump. Quick attack coupling with dimensionally stable hose. Cab with 9 seats. New M+S 9 Rx22.5 tires, DOT 2024. Wheelbase 3100 mm. Maximum speed according to registration documents = 90 km/h. Fpedoz Emuaopfx Aiksp Cab and superstructure are rust-free. Also in very good technical condition – fresh inspection recently carried out. Immediately ready for use. +++ Errors, changes and prior sale reserved.

Condition: excellent (used), mileage: 850,267 km, power: 294 kW (399.73 HP), first registration: 08/2012, fuel type: diesel, tire condition: 50 %, axle configuration: 6x2, fuel: diesel, color: silver, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, number of seats: 2, Equipment: ABS, crane, electric window regulation, power mirror, = Additional options and accessories = - Adaptive damping system - Alarm system - Steering wheel audio controls - Sun visor = Remarks = Crane Number of hydraulic extensions: 3 Remote control: ✓ Beautiful MAN TGX 26.400 configured as a CRANE TRUCK!! In addition to the options already mentioned, it features: -Manual transmission -Palfinger PK34002 SH-B -34 tm crane -3x hydraulically extendable -Remote control -2 beds -stand-alone air conditioner etc etc Optionally available with a trailer German combination directly from the first owner! = More information = General information Year of construction: 2012 Operating hours: 3.737 Axle configuration Tyre profile: 50% Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Steering Weights Empty weight: 16.170 kg Carrying capacity: 9.830 kg GVW: 26.000 kg Functional Crane: Palfinger PK34002 SH-B, year of manufacture 2011, on rear of chassis Extendable superstructure: Yes Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Fpedpfsz A Tmwox Aikjp Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, Year of construction: 2014, offer consists of: Fpsdpfx Ae Af Nduoikop - flat pile feeder unit FFU-56 - buckle folder AF-566 F - 2. folding unit T-564F - long conveyor unit LCU-54 - parallelfold rollers condition: 50% - fold unit: 80% Horizon AF-566 F 6-buckles folding machine - technology: touch & work - roller adjustment: fully automatic - memory folding types: 17 standard-typs of fold preprogrammed - saveable jobs: 200 memories for repeat orders - numbers of buckles: 1. folding unit: 6 buckles 2. folding unit: 4 buckles - sheet size: max. 558x850mm; min. 128x148mm - buckle fold length: 1st buckle: min. 58mm all other buckles: min. 35mm - paper weight: 40-250g/sqm - pile height: 740mm - speed: max. 50.000 cycles/h - power: 400V/50Hz - 2,9kW - dimensions: 2.030x1.080x1.550mm - weight: 1.450kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, mileage: 25,790 km, power: 121 kW (164.51 HP), first registration: 08/1995, fuel type: diesel, overall weight: 9,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total length: 6,300 mm, total width: 2,500 mm, total height: 3,050 mm, Equipment: all wheel drive, Vehicle: Mercedes-Benz 917AF // Ziegler Tires 9R 22.5 Uniroyal monopoly T70 * 4x4 drive * Dual tires on rear axle * Mud flaps * Manual transmission, 5 gears * 2 differential locks * Power take-off Fpjdpfszfc U Ssx Aikjp * Dual tires on rear axle * Gross vehicle weight 9,000 kg -> weight reduction possible * 9 seats * Rear-view camera with separate monitor * Ziegler fire pump with TROKOMAT + 600 l water tank * Former fire engine conversion with plenty of storage space and compartments from Ziegler * Hose reel * Roof ladder at the rear * Storage box on the roof * Small floodlight + additional spotlights * 5 roller blinds all around * 2 tie-down points at the front * Trailer hitch, 2 tons We can possibly arrange a cost-effective conversion to a motorhome body with one of our bodywork partners! Vehicles in top condition available in our warehouse! Sale on behalf of a customer Note: Please call briefly before your visit? We will ensure that your desired vehicle is on site. If it is not in Wachtendonk, we will gladly deliver it from our stock. Individual conversion possible upon request. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! The information provided in advertisements, on the internet, on price tags, and in pictures are non-binding descriptions and do not constitute guaranteed features. The seller also assumes no liability for typing and data transmission errors. The listed equipment may need to be checked separately. Errors and prior sale are reserved.

Condition: ready for operation (used), Year of construction: 2018, Machining sides: 3, workpiece materials: aluminium/steel, travel X: 4000mm, feed rate: 120m/min, A-axis: +/-110°, spindle speed: 18000rpm, tool holder: SK30, tool positions: 8, max. profile dimensions X/Y/Z: 4000mm/250mm/190mm, machine dimensions X/Y/Z: approx. 5750mm/2100mm/2350mm, weight: approx. 4000kg, control: Mecal. Documentation available. On-site inspection is possible. Fsdpfxjyh Nv Ho Aikepp

Condition: reconditioned (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, Equipment: documentation/manual, lighting, type plate available, Refurbished Multisensor Measuring Device Mahr MS 222 - LIKE NEW Including certification of acceptance prior to delivery Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2024. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Delivery Options: Factory service or worldwide shipping via freight forwarder. Demonstrations: Online or on-site demos available with customer-specific parts. Application consulting provided by accredited Profitech measurement laboratories during project planning. Comprehensive Service Package: – Delivery, setup, commissioning, accuracy verification according to standards, certification, and extensive acceptance documentation. – Tailored training programs available, including online courses. Flexible Payment Options: Rental, lease-purchase, or financing directly through Profitech—no financial institution required. The measuring device can be configured to meet individual customer needs. Specifications: Measurement Range: 200 x 200 x 200 mm Load Capacity: Glass plate 10 kg Scale Resolution: 0.1 μm Maximum Traverse Speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine Weight: 170 kg Control Cabinet Weight: 90 kg Length Measurement Accuracy: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Probing System with Optional Probe Package: Renishaw TP20 probing system installed Retrofit: Updated in 2025 Includes PC and Software Fjdpfx Aijglp Nqokepp Illustrative Image by the Manufacturer

Condition: used, machine/vehicle number: IC1545, Year of construction: 2021, operating hours: 7,720 h, load capacity: 2,200 kg, lifting height: 2,100 mm, fuel type: electric, mast type: simplex, construction height: 1,430 mm, fork length: 1,190 mm, front tire size: x, rear tire size: x, enginetype: Electric, manufacturer: Jungheinrich Fpodpfj Adxarex Aiksp Serial Number: 98311220

Condition: used, mileage: 50,958 km, power: 177 kW (240.65 HP), first registration: 10/1993, overall weight: 13,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, total length: 7,200 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, all wheel drive, +++ Exceptionally clean vehicle with original 50,958 km +++ Water tank 1200l +++ Rear pump 16/8 Superstructure: Schlingmann All-wheel drive 4x4 with 2x differential locks, center and rear, ABS Manual lighting mast with 2x 1000W Wheelbase 3640 mm Maximum speed Vmax according to documents 92 km/h, according to GPS: 95 km/h Recent inspection completed, including lubrication and new fuel filter as well as new air dryer cartridge +++ Errors, changes, and prior sale reserved. Fodpfxoz Amn Dj Aikepp

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: 49C7264, 8-spindle automatic lathe (90), make Schütte, model AF32, year 1988, SN 49C7264, bar feeder by Pietro Cucchi with integrated chip conveyor, with C-axis and control, make Siemens, model Sinumerik System 3 Fpsdpfxsy Drcls Aiksp