Used Advance 3800 for sale (3,451)

Condition: used, Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: HOMAG Crodpfx Absd Duvfjbsk -Type: 0-380-03-0497 -Type: 2-006-51-2870 -electrically heated -Dimensions: 400/70/H225 mm -Weight: 10.6 kg

Condition: good (used), Hach DR 3800 VIS Spectrophotometer The DR 3800 is a VIS spectrophotometer with a wavelength range from 320 to 1100 nm. The instrument comes with a complete set of application programs and supports multiple languages. The DR 3800 spectrophotometer includes the following Programs and operating modes: Stored Programs (pre-installed tests), Barcode Programs, User Programs, Favorites, Single Wavelength, Multi-Wavelength, Wavelength Scan, and Time Scan. The DR 3800 Spectrophotometer performs digital measurements in units of concentration, absorbance, or % transmittance. Crjdoiuzvxspfx Abbok When a user-generated or programmed procedure is selected, a structured menu system and prompts guide the user through the test. This menu system can also generate reports, statistical evaluations of generated calibration curves, and reports on instrument diagnostic tests. Display modes: transmittance (%), absorbance, and concentration Light source: Halogen lamp Wavelength range: 320-1100 nm Wavelength accuracy: ± 1.5 nm (wavelength range 340-900 nm) Wavelength reproducibility: 0.1 nm Wavelength resolution: 1 nm Wavelength calibration: automatic Wavelength selection: automatic, depending on selected method Scanning speed: = 12 nm/s (in 1 nm steps) Spectral bandwidth: 5 nm Photometric measuring range: ± 3.0 Ext (wavelength range 340-900 nm) Photometric accuracy: 5 mExt at 0.0-0.5 Ext; 1 % at 0.50-2.0 Ext Stray light: < 0.1 % T at 340 nm with NaNO2 Data memory: 1000 measured values (result, date, time, sample ID, user ID) User programs: 50 Meter dimensions and environmental conditions: Width 368 mm; height 144 mm; depth 359 mm; weight 6.4 kg Ambient conditions (operation): 10-40 °C, max. 80 % relative humidity (without condensation) Ambient conditions (storage): -40-60 °C, max. 80 % relative humidity (without condensation) External power supply: 100-240 V/50-60 Hz (input); 15 V/30 VA (output) Interfaces: Use only shielded cables with max. 3 m length. 1 x USB type A; 1 x USB type B Housing protection class: IP3X Circuit classification: Device: Class III; System: Class II Item condition: used More items - new and used - you can find in our store! International shipping costs on request!

Condition: excellent (used), Battenfeld Calzoni hydraulic motor MRE5400/5401/33800 Codofhmkgjpfx Abberk A1640538

Condition: used, empty load weight: 8,910 kg, maximum load weight: 30,090 kg, overall weight: 39,000 kg, first registration: 03/2025, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, cooling unit, electronic stability program (ESP), tail-lift, NEW!! Schmitz refrigerated trailer with Thermo King refrigeration - Refrigeration unit: Thermo King Advancer a400 - 13.40 x 2.50 x 2.65 m - Double-decker - Wide platform - Tail lift - Power connection - Disc brakes - Temperature recorder - Schmitz axles - Lift axle - Pallet box - Aluminum floor - FRC 2030 - Tires: 385/65/22.5 NEW! Net export price! Crjdpsv Tzliofx Abbek   NEW!!! Schmitz deep-freeze trailers with Thermo King refrigeration - Refrigeration unit: Thermo King Advancer a400 - 13.40 x 2.50 x 2.65 m - Double deck - Flower width - Lift gate - Power connection - Disc brakes - Temperature recorder - Schmitz axles - Lift axle - pallet box - Aluminum floor - FRC 2030 - Tires: 385/65/22.5 NEW! Net export price!   NEW!! Schmitz semi-remorque refrigerator with Thermo King refrigeration - Groupe frigorifique: Thermo King Advancer a400 - 13.40 x 2.50 x 2.65 m - double floor - Largeur de la fleur - Electric raccording - Freins à disques - Temperature recorder -Essieux Schmitz - Essieu relevable - caisses palettes - Plancher in aluminum - FRC 2030 - Tires: 385/65/22.5 NEW! Prix net export!   Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchases and sales extend across national borders, so you will generally find the export price in our advertisements, as this is independent of the place of use.   Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information is to be viewed as non-binding general information and does not replace detailed, individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to changes, errors, typos, and advance sales.   Our general terms and conditions apply exclusively.     Languages - We speak English - On parle francais - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Year of construction: 1981, condition: used, pressure 63 t stroke 6-60 mm no. of strokes 90-550 Hub/min 300 mm table surface area 780x600 mm ram surface 807x460 mm tool hole in ram Ø 40 mm Cedjlp U R Ispfx Abbsrk ram - range of adjustment 80 mm total power requirement 15 kW weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2900x2000x3000 m

Condition: used, Year of construction: 1996, Carriage length: 3800 mm Cutting width at the width stop: 1350 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 125 mm Scorer: yes Saw blade height adjustment: handwheel Swivel adjustment of saw blade: Handwheel Crsdpfork H Easx Abbsk Width stop adjustment: manual Saw blade angle display: Scale Cutting height display: - Width stop display: Scala Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 5.5 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm weight: 900kg

Condition: good (used), Tape length: 3800mm Band width: 600mm Crodpfofd N U Rox Abbsk Electrical output: 4 kW belt speed : 80m/min

Condition: excellent (used), functionality: fully functional, Göpel electronic GmbH Automatic Optical Inspection Unit AOI, OptiCon AdvancedLine X60 Model: OptiCon Type: AdvancedLineX60 Operating hours: 51,326 h (switch-on time from internal PLC) Year of manufacture: 2014 Technical specifications: Voltage: 230 V AC Frequency: 50/60 Hz Rated power: 800 VA Short-circuit breaking capacity: 15 kA Compressed air: 6 bar Laser class: 2 Protection class: IP20 Credpfx Abowlquisbek Features: - 4M camera with T21 resolution and 42 x 42 mm field of view - Angled view - "Chameleon Colour" module - Extended inspection area in the X direction to 670 mm - 2D barcode reader from below - Software version: 5.3

Condition: used, Year of construction: 2000, Tires (v): 520/85R38, speed: 40, / 540 rpm, boom sections (7x) / _____ / axle 180 - 225 cm / induction hopper / 27m boom / 5-fold nozzle body, single-occupancy / hydraulic / slope compensation / clear water tank / volume 4000 ltr / Vacu Codpfoqrrnvex Abbjrk

Condition: used, Year of construction: 2022, Fully integrated turning and tilting table with counter bearing Additional fixed table on the left for the first machining side X-travel of 1,530 mm High dynamics and speeds of 20,000 rpm Fully encapsulated work area, separate from the Tool magazine Good accessibility Easy to automate with pallets and robots X-axis travel 1,530 mm Y-axis travel 530 mm Z-axis travel 465 mm Rotary table diameter 5th axis 650 mm Number of tools 54 Spindle speed 20,000 rpm Tool Holder HSK63 U-1530 MACHINE: Advanced build variant for highest performance level in U5 5-axis version Strokes X=1530mm, Y=530mm, Z=465mm Linear guidance in all three axes Required setup elements on the machine bed for adjustment Full cladding splash guard + working area light High Precision MILLING SPINDLE: Up to 20,000 rpm in fit-motor spindle With direct drive without belt Liquid cooling Tool mount on HSK63 spindle TOOL MAGAZINE: With 54 tool stations High-speed intelligent controller version With fast-running tool chain Separated from working area by pneumatic flap U-1530 FIXED TABLE: With T-slots for fixing workpieces and clamping devices 160mm top plate available for distance table/spindle for tall superstructures and use of tailstock DIRECT MEASURING SYSTEMS in X/Y/Z-Axis: For increased positioning accuracy and improved heat transfer Designed with Heidenhain scales and integrated in control Version with SIEMENS control with the following features: Attention: Siemens general conditions for software products are valid SIEMENS 840D control with features: New developed: SPINNER-SPIOS 24" Touch Control Panel for 10.4 applications Ultra-compact design with reduced panel footprint for premium ergonomics Multitouch layout, colorful flat panel display with Multi touch functionality Integrated Edge devices for full digitization Easy to use and user interface 2-Axis Rotary Tilt Table D=650: High precision “S” design Made in Germany with direct measuring systems on both rotary axes Designed for demanding machining operations Equipped with high-power gear Rotary feed for automatic operations and pallet changer Equipped Features: Pre-tensioned high-performance brakes in B and C axis Designed for clamping during emergency stops High axial stiffness Increased accuracy in the tilting axis Heavy Duty Table: Max load capacity 650 kg Tilting force and accuracy designed for serious machining Csdpfxewkum To Abberk Hydraulic Brake: For large rotary table in C-axis Increased rigidity during machining Counter-Balance Function in B-axis: Compensates tilting moment on the rotary table with workpiece force Enhanced stability during machining 6-Fold Rotary Feed: Inside the center of the C-axis 6-channel designed for media connection Max hydraulic pressure of 240 bar or additional exhaust ventilation connections High pressure tank: 70 bar capacity with paper band filter for flushing, located centrally through the spindle, stand-alone next to the machine with additional coolant volume, including high-pressure pump and level monitoring. Additional blower: Air at headstock for cooling with air instead of liquid. Compressed air supply: Supplying via milling spindle, alternatively to coolant high-pressure through spindle. Rinsing gun: Installed in the working area for cleaning. Preparation: For SPINNER-Blum Touch probe with IR receiver for wireless transmission. "Advanced Surface" For optimizing the machining surface. "Spline Interpolation" To shorte...

Year of construction: 2019, operating hours: 351 h, condition: ready for operation (used), General Data Machine weight 16000 kg Csdexc Rb Iopfx Abbork This HILALSAN Advanced Cap 3320 was manufactured in 2019. It features a pressing force of 320 tons, a bending length of 3100 mm, and a stroke of 365 mm. With a throat depth of 510 mm and a main motor power of 30 kW, it's ideal for heavy-duty press brake tasks. Only 351 operating hours. Contact us for more information. Application Types Bending

Condition: used, Year of construction: 1999, Carriage length: 3800 mm Cutting width at the width stop: 1500 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Swivel adjustment saw blade: electric Crjdpovxi Ddefx Abbjk Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Width stop display: Digital Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3 Motor power: 7,5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3900mm Machine width: 2200mm weight: 1000kg

Condition: new, Year of construction: 2023, operating pressure: 1,000 bar, fuel: diesel, Kärcher HD 9/100 De Skid Advanced High pressure cleaner with up to 1000 bar This is an unused exhibition device! Current manufacturer RRP €80,000! The machine is being sold as a used machine with no return, guarantee or warranty. Net price €24,900 // Gross price €29,631 - Viewings possible! Crodpfx Abevz Aq Asbjk - Shipping can be organized nationwide, costs €300 - We would be happy to have our leasing partner create an attractive leasing/financing offer for you!

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser Crjdeg Ewwropfx Abbek -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 5,552 h, power: 36 kW (48.95 HP), motor manufacturer: Kubota, gearing type: hydrostat, fuel type: diesel, maximum speed: 25 km/h, color: white, overall weight: 3,500 kg, total height: 2,000 mm, total length: 3,800 mm, total width: 1,200 mm, working width: 2,450 mm, Equipment: additional headlights, air conditioning, cabin, hydraulics, lighting, trailer coupling, Carrier vehicle / Sweeper: Kärcher MC 130 Advanced Year of manufacture: 2016 4-cylinder Kubota diesel engine, 2434ccm, 36kW Hydrostatic drive, Vmax 25km/h All-wheel drive Municipal hydraulics front and rear 15,902 km; 5,552 engine hours; 3,110 sweeping hours Unladen weight: 2,350 kg; permitted GVW: 3,500 kg 2 front brushes, laterally adjustable; max. working width: 245 cm 195 l fresh water tank with dust suppression system Tow hitch (2,700 kg) Amber warning beacon Work lights 1.3 m³ tilting debris hopper Credew Dcg Iopfx Abbok Articulated steering Reverse and brush cameras Air conditioning Heated windscreen Heated seat Radio/CD 380 cm x 120 cm x 200 cm (LxWxH) Municipal vehicle from first owner Receive all new vehicle listings by email – subscribe to our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: good (used), Year of construction: 2019, Marking printer WEIDMÜLLER PrintJet Advanced 230V, No. PA19100043, year of manufacture 2019 Codpfx Aevldcbebberk

Year of construction: 2014, condition: used, Machine in working condition. Was recently decomissioned. Credpfxswd Ex Te Abbsk 4MP camera with T21 resolution and 42x42mm field of view Oblique view – "Chameleon Colour" module Extended inspection area in X-direction to 670mm 2D barcode reader from below

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Crsdpeg Ey T Esfx Abbok Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW medium: oil up to 350°C Maximum external volume: 66 ltr at 350°C max. flow rate: up to 150 l/min  max. delivery pressure: up to 8,0 bar Motor power: 2.8 or 4 kW Crodpsg Ey Rfjfx Abbjk Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Regulation and control unit Smart Controller (7" Touch-Displ) -Heating control via solid-state relay -Control box IP54 -Cooling controlled via solenoid valve -Flow measurement using the differential pressure principle -Bypass between flow and return with reduced cross-section -Level monitoring by means of magnetic float switch -flow monitoring by recording the heating rod surface temperature and the flow rate -dirt filter in the cooling water supply and in the return of the circulation system -monitoring of the flow temperature by electronic safety temperature limiter -external oil filler neck -Dilo fittings on internal piping connections (except pump connections) -at 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanketing with pressure gauge and safety valve 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. *Unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be stated in quotations or order confirmations.

Condition: used, Used Pontifex approximately 66,000 litre 304L stainless steel dual compartment vertical storage tank. Unit measures approximately 3800mm diameter x 6000mm straight side. Has welded dished top and bottom heads. Mounted on skirt. Specifications: Capacity: 17,461 gal Diameter: 12.47' Height: 19.68' Crodpfxexw Td Io Abbsk Type Of Heads: welded dished top and bottom Vertical/Horizontal: vertical Type of stainless: 304L Legs/Lugs: Mounted on skirt Dimensions: 3800mm x 6000mm

Condition: good (used), Year of construction: 2009, operating hours: 647 h, load capacity: 1,500 kg, lifting height: 3,800 mm, fuel type: electric, mast type: duplex, construction height: 2,330 mm, empty load weight: 1,531 kg, mileage: 647 km, This HYSTER electric stacker from 2009 is in good condition; The capacity is 1,500 kg; The stacker lifts up to a height of 3,400 mm; Drive-through height is 2,330 mm; ONLY 647 hours on the clock; Equipped with a 24-volt maintenance-free GEL battery from 2019 and an external charger. Make an appointment for a test drive. Video to follow! Crsdpfx Abjxnddgjbsk

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,350 mm, The JSM is an affordable all-round machine for small and medium-sized craft enterprises with high demands on surface quality. It is available in two sanding widths and three equipment packages. Depending on the package, it is ideally suited for solid wood, veneer, and lacquer sanding. - Sanding width: 1,100 or 1,350 mm - Feed unit with profiled conveyor belt - Feed speeds: 3 - 12 m/min - Variable working height via motorized height adjustment (maximum table height 880 mm) - Workpiece thicknesses: 3 - 160 mm - Pressure roller (Ø 50 mm) - Table extensions with non-driven rollers at infeed and outfeed (300 mm each) Crodpfxewz Igne Abbsk - 15.6" touch display (integrated) - CSD pressure beam system (magnetic pressure beam) - Remote maintenance program - Sanding belt length: 2,150 mm, sanding belt width: 1,120/1,370 mm - EMS Energy Management System for energy-efficient machine operation - 1 emergency stop switch at the terminal, 2 emergency stop switches at the machine outfeed - LED lighting inside the machine (on the belt support side) - Terminal and belt support side on the left - Electrical version: 400 V, 50 Hz Advanced package additional features: - Vacuum table with pre-drilled holes for connecting the vacuum blower - Vacuum blower integrated within the machine - Workpiece cleaning with oscillating air nozzle - CSD pressure beam system (magnetic pressure beam) instead of the ACP system - Oscillating sanding belt discharge - Belt Manager software

Year of construction: 2025, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Crsdpfx Aomt Dcqsbbsk Dew point temperature 3°C Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 95 kg Type and amount of refrigerant R410a, 650 g

Condition: used, Cincinnati 5FL12 Hydraulic Shear with Elgo Electric P8511 Control Panel DRO, Rear Haul Off Conveyor, Powered Back Gauge, 5/8" Capacity Mild Steel (16m), Bed Width 3800mm. S/No. 33K27 Crodpex Agibjfx Abbok Location: These lots are located in Dudley, West Midlands, UK. Unfortunately, there are no loading facilities, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2018, Ref: 11032 . 2018 MBO K8-RS.6/SKTL Latest model, 16pp+ High speed combination folding machine Equipped with: FP130 Pallet loading flat pile feeder with ‘Vaculift' and 120 cm pile height. ‘M1 Advanced’ intuitive operator guidance system with adjustable 15.6” touchscreen RAS (remote maintenance software) & sheet tracking Datamanager 4.0 software package for production planning Automatic adjustment of buckle fold combi-plates with deflectors Automatic adjustment of folding rollers Slitter shaft cassette for quick make-ready Sheet stop in the crossfold can be used as waste paper ejector without stopping production Total & batch counter Sound hoods with inspection windows Palamides Alpha 500 Plus presser-stacker delivery Including integral compressors, tools & manuals. Folding configuration: 6 Parallel plates in the first unit with slit/score shafts 1st Knife at 90° with slit/score shaft & single plate fold to side 2nd Knife to the left of the first knife. Specification: Sheet size, Max: 80 x 120 cm Min: 15 x 25 cm parallel fold Min: 15 x 20 cm cross fold Min: 20 x 30 cm three fold Sheet thickness: 35 – 250g Crjdpfjxx Uxvjx Abbsk Mechanical speed : 230m/min