Used Adhesive Binding for sale (3,945)

Condition: ready for operation (used), Consisting of: full tools, books and accessories available Tjdpfsq Aufqjx Ahujf Technical Data Working range -base machine with electric equipment -in feed unit, MR -book bloc in feed with splitter -gluing unit -pre-heater and heated rounding unit -paternoster with press on unit -belt delivery 370mm x 270mm x 80mm max 125mm x 100mm x 6mm min 14 – 36 cycles per minute

Condition: excellent (used), Year of construction: 2004, Perfecta Bookline S Age: 2004 Counter: 65.000 Books Size: 45 x 27 cm Speed: up to 1800 books/ hour • 5 clamps • hand-feeding station with jogger • spine preparation with exhauster • hotmelt spine and side glue • premelter • coverfeeder (toploading), with scoring • Compressor Tsdpfxev T I R So Ahujf Available immediately

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Tunkers Vorwärts S1100 fully automatic sheet to sheet laminating machine. Tjdpfx Ahsv Rpknjuef Sheet to sheet laminating machine which is in good condition and was used a few times for specific jobs. Dismantled and packed, ready for shipment.

Condition: used, Year of construction: 2018, functionality: fully functional, ∙ BQ-470 (2018) - USED - HORIZON BQ-470 (EVA) Total Counter: 609212 - AC-470L (Delivery Conveyor Long) - VS-470 (Smoke Extractor) ∙ Specifications Binding Modes: Binding with milling, Binding without milling, and Pad binding Number of Clamps: 4 Book Block Size (Top-Bottom x Fore-edge) Max. 320 x 320 mm Min. 145 x 105 mm Todpfx Ajxr S Arehuof Book Thickness: 1 to 65 mm (Book thickness may be limited depending on sheet weight, book size, and milling depth.) Cover Size: Max. 320 x 660 mm Min. 135 x 225 mm Cover Stack Height: Max. 150 mm Warm-Up Time: 60 min Cycle Speed: Max. 1,350 cycles per hour (EVA) Voltage / Frequency: 3-Phase 200V. 50 / 60 Hz

Condition: good (used), Case maker Tedpfxouauivs Ahuof Kolbus Model DA36 Minimum size 110 x 155 mm Maximum block size 405 x 560 mm Spine size 8 -80 mm Speed Machine can run 14-15 cases a minute in it´s current condition Formats that we do mostly on the machine are A4, A5, B5, B6 The machine can work with paper and PU leather materials. The machine is in operation and can be tested until September 2024, after that we install a new machine so the test will not be possible Location: Serbia

Condition: good (used), Bookbinding screw press 50×40 on a base The device is fully functional, ready to work. Todpfxewud Saj Ahusf Format 500×400 mm Pressure 5t

Condition: good (used), Karl Tranklein ZP Combi hydraulic bookbinding press The device is ready to work. The press has a built-in hydraulic unit. Two independent stations. Tsdpjwxtd Tsfx Ahuef A single station surface: 325x440mm Irreplaceable in the bookbinding shop when producing books, blocks, etc. The machine is equipped with photocells, additional safety features.

Condition: good (used), Poma LS 1300 rotary bookbinding shears Production in Germany. Shears in good condition, ready for production. The construction made entirely of cast iron ensures rigidity and repeatability of cutting. Cutting width approx. 1300mm Ideal for bookbinding cardboard. Side margin. The machine has a feeder. Todpfx Ahswt Suasusf 8 sets of knives Weight 1500kg

Condition: good (used), Curt Beier B500 bookbinding press for backing Manufactured in Germany. Perfect condition. Solid cast iron construction, strong pressure ensure precise operation. Jaw width 44cm Weight 40kg Tedpfxjwt Sugj Ahuof

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Todpfx Ajk Hz Nqehusf Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2001, condition: like new (used), Etipack Model: SIST.1 FLEXO (EMC DX head) Direction:Left-Right Type: Labeller for self-adhesive labels Serial: A1A357R1-1 Build: 2001 Tjdpsfzknvsfx Ahujf Dimensions: L x W x H = 2,600 x 1,400 x 1,250 mm conveyor length 2,600 mm Coveyor wide 110 mm (Welt) Press on belt 90 mm high Weight: 400 Kg Electric 230 Volt - 50 Hz - 200 Watt Features: Machine suitable for round and conic wraparround machine technicly checked conveyor frequency driven

Condition: excellent (used), For sale: Complete industrial pneumatic press in a workshop housing, ideal for punching, pressing, stamping, or other assembly processes. The set includes: • Pneumatic column press with a robust steel frame • Control valve, cylinder, and pneumatic distribution • Integrated control panel with emergency stop switch Tjdpsud Rddefx Ahuef • Steel worktable with adjustable side guides • Power cabinet, distribution board, and cable management • Mobile table with transport brake Drive: Pneumatic supply Control: Solenoid valves, start/stop buttons Power supply: 230 V (electric system integrated in the base) Technical condition: Very good. Used, fully functional set ready for immediate use in a production facility. Genuine industrial construction, not for amateur use.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SJ48233E, working width: 2,985 mm, stack height: 2,500 mm, type of input current: AC, input voltage: 230 V, overall weight: 136 kg, total height: 1,346 mm, total length: 635 mm, total width: 864 mm, GBC AP-2 Ultra. Complete with 2:1 and 3:1 Wire-O punching dies. The machine works perfectly and is immediately available. Tjdpfx Ahswyv Scsujf

Condition: like new (used), functionality: fully functional, HANG 101--50 Electric Eyeletting Machine Electric single-head eyeletting machine 101--50 PiccoStar for eyelets No. 269 / 270 Ø 5.0 mm Automatic eyelet feed Suitable for paper, cardboard, plastics, etc. Ideal for contracts and certificates Tedpfxswvh Ale Ahujf Punches and eyelets in a single operation (the eyelet punches the hole) Continuously adjustable rear and side stops ensure precise alignment Push button for triggering the eyeletting process With self-piercing eyelets: up to 30 sheets at 80 g/m² paper or material thickness up to 3 mm With pre-punched material: up to 50 sheets at 80 g/m² paper or material thickness up to 8 mm Weight: 36 kg / Voltage: 230 Volts / Tools / Operating manual. The machine is in as-new condition.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Kolbus NM + PK + SW Tjdpfjwxvfgjx Ahujf Offered as a bundle Machines are available for demonstration (The Hörauf laminating machine shown in the video is not included in this offer)

Condition: excellent (used), Year of construction: 2011, Thread sewing machine Müller Martini Ventura MC-200, mechanical speed from 18 to 200 cycles/min, max. 12,000 cycles/h, min. signature length 120 mm, max. signature length 510 mm, min. signature width 75 mm, max. signature width 320 mm, max. signature thickness 4 mm, overlap opening min. 8 mm, low or high overlap, stitch count standard 13, staggered 14, stitch length 16.5 mm with/without blind stitch possible for all stitch types. Tsdpfjxfv Dtsx Ahujf

Condition: like new (used), Year of construction: 2019, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 34, Kolbus Casemaker, complete with pallet feeder type PPA290 Case – size range opened case (width x height) min. 300 x 210 mm, max. 1050 x 735 mm Cloth (width x height) min. 765 x 200 mm, min. 1080 x 290 mm Boards Thickness min. 1 mm, max. 4 mm Mechanical speed: Up to 40 cycles/min Board in-feed, Stiff spine in-feed, Flexible spine in-feed from roll, In-feed cloth, glue tank, glue rollers, pressing device, delivery belt Tsdpjwnqtkefx Ahuef Machine no: 34, Books produced: 2 million

Condition: good (used), Hello, -The subject of sale is. -Hang 87D 3P double-head riveter. -Manufacturer: Hang Germany. -Good condition. -The machine is used to rivet eyelets. -Two riveting heads, with adjustable spacing. Tsdpsv I E Scofx Ahusf -Cardboard thickness 0.2-4mm -Weight 570kg -380V power supply -Possible transport by freight forwarder (individual valuation)

Condition: new, overall weight: 140 kg, total height: 1,010 mm, total length: 660 mm, total width: 700 mm, empty load weight: 120 kg, New, originally packaged Ricoh RB5030 Ring Binder. Todpowra Daefx Ahujf New price of €33,340 euros Suitable for the Ricoh Pro 8310 / 8320, among others Paper size: A4 / 8.5 x 11'' LEF Paper Weight: 64 - 256 g/m2 Number of holes: 21 Stack capacity: 11 sets Ring Bind capacity: 2 to 100 pages Ring Supply: Black or white, up to 50 or 100 pages

Condition: excellent (used), Year of construction: 2012, STC-Ref:G-131-0005 Fetzel-TLM-500 ,Year: 2012 format: 540 x 740 mm equipped: - thermofoil device - one site laminating Tedpfx Aswixnljhuof - Single-sheet suction feeder - photoelectron. double sheet control - flat pile feeder - pressing station in delivery up to 6 bar - speed 25 mtr./min. max. - touchscreen

Condition: good (used), functionality: fully functional, machine/vehicle number: 58902-1, working width: 800 mm, For sale from Norderstedt site due to closure of business Gluing + rubbing machine with large table and laminating glue Year of construction approx. 2010, little used working width up to 800 mm Tsdporn Smpefx Ahuef

Condition: excellent (used), High temperature debinding furnace, make GERO type: HBO 50/13-3 2G heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan Tsdpjhgiz Iofx Ahusf ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

Condition: good (used), Year of construction: 2006, machine/vehicle number: FJDKO-000059, 4x DHU 450 Horizontal signature feeder,1x hand feeding station, 1x CHU 450 cover feeder, signature size 320x480 mm, 1x ST 450 stitching unit, Thickness control, 2x stitching heads, Reject gate for incomplete products, 1x Trimmer type TR 450, 2x sets of knifes, 1x Compensating stacker type CHAA, 1x roller table, technical documentation, standard parts and tools Tsdpfx Astmddgehujf Machine no: FJDKO-000059

Condition: good (used), Professional spine gluing machine for books, brochures, and paper blocks Sturdy German-made gluing machine, used in bookbinding and printing industries. It allows for manual spine gluing—ideal for short-run production, bindery workshops, and print shops. Features: • Manufacturer: Tünkers Maschinenbau GmbH • Model: 20118490 • Application: spine gluing of books / blocks / brochures • Manual operation – levers, clamps • Durable steel construction • Worktable with guides • Adjustable pressure and gluing position Tsdsu A I Rhopfx Ahusf Condition: used, very good The machine is complete and fully functional. Standard signs of use are visible.

Condition: good (used), Year of construction: 2001, machine/vehicle number: NN7716, Maximum book size: 40cm X 27cm, Minimum book size: 12 cm X 9,5cm Maximum book block size: 40mm, Minimum thickness book block: 3 mm, Max.speed 1500 p/h 4 Clamps, Milling, Tedpfxermkmro Ahuof Back and side gluing with hot melt