Used 3D Press for sale (28,984)

Condition: new, Year of construction: 2025, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams Itodew Sgnkopfx Aacen - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: good (used), Hand screw press, mandrel press, spindle press, hand spindle press, mandrel press, rack and pinion press, workshop press -Arbor press. Rack and pinion press, solid design -Projection: 210 mm -Height: min 35 mm / max 350 mm -Dimensions: 435/230/H550 mm -Weight: 51 kg Iedpfxsxni Hye Aacotn

Condition: good (used), Year of construction: 2016, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical data: Manufacturer: HSM Model: V-Press 1160 plus Stock no.: 9960 Year of manufacture: 2016 Pressing force: 55 t Drive power: 4 kW Cycle time (idle): 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Iodpsxn Ilzsfx Aacotn Bale weight: 550 kg Dimensions (WxDxH): 1700 x 1800 x 2200 mm Weight: 2430 kg Materials: Paper, Cardboard, Film Operating manual is available. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the given specifications or any possible errors. Offers are subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is ex-works, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, controller manufacturer: Cybelec, bending force (max.): 60 t, working width: 2,550 mm, number of axes: 8, type of crowning: CNC-controlled, pressing force: 60 t, working range: 2,550 mm, Equipment: CE marking, documentation/manual, lower tooling, safety light barrier, upper tooling, Used quality 2005 BYSTRONIC EDWARDS PEARSON PR60 x 2550 8axis cnc Press Brake for sale High specification and highly accurate Cnc downstroke pressbrake for sale – Video at the bottom of the listing running in our stock Bed length 2.5metre Iodpfjwihk Asx Aacetn Year / new: 2005 Model: PR60x2550 Capacity / tonnage: 60ton / 600KN Complete with quality Swiss made Cybelec MODEVA 12 CNC Control 8axis in total – Y1,Y2,X1,X2,R1,R2,Z1,Z2 – 6axis back gauge Max stroke 215mm Hydraulic crowning Hydraulic tool clamping system FIESSLER Light Guard System Associated Tooling – per photographs Fully serviced with Bystronic uk

Condition: new, Year of construction: 2021, operating hours: 15 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.700 kg Iedswwgfuopfx Aacjtn Mast: articulated arm Lifting capacity: 200 kg Rental currency: EUR Please contact Jan De Lepeleer for more information

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: Z293-068, overall weight: 32,000 kg, table width: 1,500 mm, table length: 2,500 mm, pressing force: 407 t, control type: CNC control, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! By submitting a bid, you are obliged to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Table width: 1,500 mm Table length: 2,500 mm Hydraulic pressure: 320 bar Nominal force: 2 x 2,000 kN MACHINE DETAILS Electrical specifications Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Connection: 42 kW Rated current: 100 A Dimensions & Weight Dimensions: 5,000 x 4,000 x 3,800 mm Weight: 32,000 kg EQUIPMENT CNC control Itodsxm R S Ispfx Aacsn Cooling unit Filter extraction HILMA console throat (1,600 mm)

Condition: excellent (used), Year of construction: 2013, LAMELLAR - CASE CLAMP GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Case joints. - Counter-pressure surfaces (side pressure wall, base) are 40 mm thick, coated, continuous support plates - Electrically operated adjustment of both press beams via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance running nuts with grease reservoir. - Clamping is performed electrically using two separate worm gear motors (2 x 0.75 kW) - Pressing force: 2000 daN (kg) per press beam. - The pressing force of the press beam is electronically regulated and set via frequency converter, thus torque transmission is completely wear-free. - Pressing and adjustment speed: 25 mm/sec. - Very simple operation via 6 separate push buttons; 6 movement operations can be selected via the controller. - Freely adjustable pressing time preselection with automatic opening: 0-30 min (switchable to seconds or hours). - Working height/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm; Height min: 150 mm, max: 1400 mm. Depth: 700 mm 1 selector switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) Machine No. 380.324 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Machine used: Year of construction: 2013, fully overhauled by Ganner, 6-month parts warranty Special price: ex-stock 54634 Bitburg Ijdpfx Ajw Tdymsacetn - immediately available -

Condition: good (used), Year of construction: 1974, Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press -Manufacturer: Kalisz, manual screw press type YB-1 with solid base Itjdjigwdwspfx Aacjn -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, As-new CNC press brake from Euromac Model: FX Bend 1547 Capacity: 1500 x 47 tons Year of manufacture: 2022 CNC controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, and Z2 Ijdpfjxlivpex Aacstn Hydraulic WILA top and bottom clamping Laser safety system with angle measurement option Includes 1 set of tooling

Condition: ready for operation (used), Met elektrische achteraanslag Ponscapaciteit: 70 ton Dia x plaatdikte: Ø 28 x 20 mm Maximale slag: 80 mm 40 str / min Keeldiepte: 300 mm Werkhoogte: 1065 mm Maximale snijdikte in plaat: 20 mm Bladlengte: 455 mm 90°-snede: 130 x 130 x 13 mm 45°-snede: 90 x 90 x 10 mm Itjdexgv E Tspfx Aacjn Op maat gesneden rond/vierkant: 45 mm Elektromotor (vermogen): 7,5 kW Lengte: 1800 mm Diepte: 1200 mm Hoogte: 2000 mm Gewicht: 1650 kg

Condition: like new (used), Year of construction: 1997, AMADA MODEL ITS2 103 100 TONS X 3000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing Itodpfxeh H Duhs Aacon year 1997 stock no. 01853 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 100 TONS BENDING LENGTH 3000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE MACHINE HEIGHT 2340 MOTOR POWER 9 KW can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW Itodpexpqy Djfx Aacon - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake port : 300 mm nominal motor power : 7,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 6000 m³ / h Nominal volume flow : 5.089 m³ / h Negative pressure 2.587 Pa Filter area 30 m² Dimensions (L x W x H) in mm 3.000 x 1.361 x 2.817 Briquetting capacity 30 - 50 kg / h Briquette diameter: 50 mm Weight: 1570 kg Iedpfx Aoh D If Heacetn Machine is brand new in our STOCK - IMMEDIATELY AVAILABLE - subject to prior sale Location: 54634 Bitburg

Condition: good (used), Year of construction: 2021, Hand screw press, arbor press, screw press, hand screw press, pressure press, balance pressure press -Manufacturer:unicraft, Hydraulic workshop press type WPP 15 E -Piston feed: optionally with hydraulic hand pump or foot lever -Pressing force: 15 t Iedjwxr Scspfx Aacstn -Piston stroke: 160 mm -Piston diameter: 43 mm -clear height: min: 173 / max: 985 mm -Light width: 500 mm -Frame depth: 120 mm -Dimensions: 1160/860/H1750 mm -Total weight: 89 kg

Condition: good (used), Year of construction: 2004, Gebruikte SMD CNC-kantbank Type: PBH 160 3100 4C Capaciteit: 3100 x 160 ton Cybelec ModEva 12 CNC-besturing Bouwjaar: 2004 Y1-, Y2-, X- en R-as CNC-hydraulische bombering 1 set gereedschappen Ijdexlfbzepfx Aacetn Vlakke druktafel

Condition: like new (used), Year of construction: 2025, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Iodpfxstnz Ttj Aacotn Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Itjdpfoxld R Iex Aacon Type CX 1000 30 Capacity 30 ton Unloading 1000mm Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool

Year of construction: 2025, condition: as good as new (ex-display), Vacuum - membrane press VP - series are the ideal solution for the wood processing industry. VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive so that the performance is higher. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components The heating system is equipped with temperature control Rubber membrane 2.5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of vacuum / Tankinhalr 15 l Work surface: 3000x1500mm Heating system temperature: Max 60 degrees C Heating system: KW 4,5 Ijdedvltyopfx Aacotn Pump output: KW 0.75 Vacuum pump capacity: 25 m3/h Rubber membrane Dimensions exterior: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Off the shelf 54634 Bitburg -free load-

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Isdeiidm Nspfx Aacstn Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Weima Briquetting Press TH 714 The TH 714 machines are designed for plants with required throughput rates of up to 150 kg/h. The stable press housing enables the production of high-strength briquettes - from materials such as wood, polystyrene, foams, light metals, paper or biomass. Numerous additional options can be implemented, e.g. oil cooling for multi-shift operation. All machines are available as left- or right-hand version. Mounting on a stable base frame ensures fast installation and makes mobile use possible. User-friendly operation thanks to Siemens PLC control In order to live up to our performance promise, we design and produce all control cabinets ourselves at our Ilsfeld site and equip them with well-known international components. This guarantees highest quality with compact design. The used PLC-control from Siemens is perfectly adapted to the requirements of the briquetting process. Impurity-resistant screw conveyor due to cardanic suspension The screw conveyor, which transports the material into the pre-compressor of the briquetting press, is suspended on a cardan joint. This prevents interfering materials from causing damage to the screw conveyor. As is so often the case, however, it always depends on the specific application which suspension is chosen. For metal applications, for example, we often recommend rigidly mounted screws. Isdpeil Hggjfx Aacotn Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil quantity (liters): 250 Weight (approx. kg): 1100 Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake port : 250 mm nominal motor power : 6,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 4.900 m³ / h Nominal volume flow : 3.534 m³ / h Negative pressure 2.451 Pa Filter area 22,4 m² Dimensions (L x W x H) in mm 2.305 x 1.333 x 2.609 Briquetting capacity 30 - 50 kg / h Location: Comes to stock 54634 Bitburg Ijdpfxecdr E As Aacetn Subject to prior sale

Year of construction: 2025, condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Iodpfjdwh E Aox Aacetn Possible applications: Veneer / form gluing / wrapping... Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l working area: 3000x1500mm Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Dimensions outside: 3100 x 1650 x 1600 mm Weight: 450 kg Machine is equipped with a chassis. Location: From warehouse 54634 Bitburg - free on truck -

Condition: like new (used), Year of construction: 2025, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Itjdpfxetnz Hbe Aacsn Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Year of construction: 1985, condition: excellent (used), Edge gluing press for veneer, solid wood and plastic, model HFK 2200, for trimming edges during press time. Isdpfx Aew Apqqsacstn When using heat-curing glue, we achieve pressing times of 20 to 30 seconds for veneer edges. Maximum working size approx.: 1,400 x 2,500 mm Heating: 1.7 kW Electro-pneumatic edge press Haug HFK 2200 for pressing edging material onto wood, with heating. 3 table extensions Swiveling work table Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1968, Veneer press Manufacturer: Bütfering Model: 22/11 Year of manufacture: 1968 Plate size: 2.2 x 1.1 m Note: Heating plates no longer function – therefore very inexpensive Has been used as a cold press 4 cylinders Cylinder stroke: 360 mm Hydraulic Ijdpfx Asw Nbzteacjtn Location: ex stock 54634 Bitburg - immediately available -