Pick-up

MERCEDES-BENZ GLE 350 de 4Matic AMG LINE/KEYLESS/Night-Paket

Condition: ready for operation (used), Year of construction: 2018, Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for reading orders/machining operations and documentation. Was serviced regularly, an on-site inspection is possible. Hfodpfxozbb Rrs Ap Eon

Condition: excellent (used), Year of construction: 2017, It has only worked for 445 hours. Very good technical condition. Ready for operation. The machine is designed for cutting aluminum and PVC. E 580 control system. Blade diameter: 500 mm. Hedpfezgu Efsx Ap Eofn Cutting according to the outer dimension, without correction. Blades guards are automatically lowered and raised. Pneumatic adjustment of the cutting angle from 45 to 90 degrees. Printer included.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 4,000 mm, total width: 2,000 mm, load capacity: 800 kg, Vacuum lifter with battery operation for cordless operation of the lifter. No cables that can be damaged or torn off. Extremely long battery life before recharging. Very high maximum weight of the panels to be lifted, up to 800 kilograms depending on the surface condition - if required, we can also offer lifters for higher loads. Panel size max. 4000x2000 mm and 3000x1500 mm. Panel lifters can also be pushed off individually for parts removal. Suction feet can be moved individually on the traverse. CE-compliant product. Hodewzvztepfx Ap Ejfn

Condition: new, Year of construction: 2022, fuel type: diesel, number of cylinders: 6, cubic capacity: 12,816 cm³, rotational speed (min.): 1,800 rpm, overall weight: 1,015 kg, type of cooling: water, Industrial type Date of manufacture: 12/2022 Condition: new Type of engine: OM460LA Serial number: 458.991 Hfsdpfxsyymp Es Ap Esn Please contact for more information Worldwide delivery

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, Effective cutting length: 4000 mm Blade diameter: 500 mm Electronic tilting of the inner/outer saw heads Tilting range: 22.5° to 135° Hjdozrhuwopfx Ap Ejfn

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, SmartLift SL-380 Indoor. Used, in good working condition. Hfedpfx Ajzz Spwep Ejn

Condition: ready for operation (used), Year of construction: 2007, overall weight: 1,550 kg, cutting speed: 2,800,000 mm/min, Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details. • Blade diameter: 450 mm • Blade bore: 32 mm • Cutting capability: double miter (left and right) • Build: heavy-duty, solid construction for high stability and precise results Hfjdpfx Apoyhfm Dj Ejn • Condition (as stated by owner): low operating hours; regularly serviced; maintained in excellent condition • Application: suitable for workshops, assembly lines, and heavy-duty industrial environments

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Hfodpfx Ajy Ah Tkjp Ejn Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Year of construction: 2023, condition: like new (used), functionality: fully functional, 4 axis CNC machining center FOM INDUSTRIE FNC 230, year 2023 Condition: excellent, as new Standard configuration: ▪ Electrospindle 5 kW, 18.000 rpm (ISO 30) ▪ 10 location tool magazine on Left of machine base ▪ No. 2 pairs of pneumatic vices with positioning through the travelling column ▪ Left retractable fixed pneumatic stop ▪ Minimum quantity lubrication (MQL) with pure oil ▪ Manual greasing device ▪ Chip and waste collection tank in base ▪ Perimeter guard system. Retractable front door with automatic opening ▪ Control equipment: POWER-I ▪ Movable control console ▪ Handheld control unit ▪ 24” Display ▪ Licence for FST CAM 4 program Option installed on the machine: ▪ PR205562 Tool length measurement and tool breakage detection device ▪ PR205563 X-FLOW (Automatic orientation of lubrication nozzles) ▪ PR205564 Pair of additional vice swith positioning through travelling column ▪ PR205921 SINGLE WORKING AREA 2 PIECES MACHINING WITH X PAL: - LED bar - SW for profile positioning - SW to view machining cycle progress - Device to measure profile length PR205921 - ''Clock'' time calculation module program user license - Right pneumatic fixed stop - Tunnel for oversized profile machining - SW to manage oversized machining operations ▪ PR205571 Lubrocooling with minimum use of water-oil emulsion ▪ PR205574 Rear chip collection tanks ▪ PR205576 Horizontal blade assembly cone with blade Ø 150 mm  ▪ PR205577 Centralised automatic lubrication system Hsdpfxoz Ey Uaj Ap Eefn ▪ PR202971 Wireless optical bar code and QR code reader, complete with software for importing data compatible with Fom protocol ▪ ZP713706 License module Statistics: version for CNC 4-axis. Software for collecting machine operation and productivity data

Condition: ready for operation (used), A 4-axis CNC bar machining center Elumatec is available. Version: 6,4m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible. Hfsdpfxey Aafxo Ap Esn