AOI

Marantz GTAZ650 inline

Condition: excellent (used), White Type: WKL 34/60 Weiss air-cooled climate chamber Ledpotr Dinjfx Adterg Refrigerant converted to R-452A -60°C to 150°C Room volume: 34 liters Entry port installed in basic equipment: R1 NW 50 mm L1NW 120 mm Internal dimensions: Height 310 mm Width 324 mm Depth 300 mmm External dimensions: Height 1740 mm Width 630 mm Depth 970 mmm Characteristic values for temperature tests: Temperature range -60 to +150 °C Temperature differences in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 1 K ± 1 to ± 2 K Temperature deviation in space (corresponds to temperature gradient) 2 to 4 Temperature change rate (according to IEC 60068-3-5) Heating 2.5 K/min Cooling 3 K/min Heat compensation max. 550 W Characteristic values for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 %r.H. Temperature and humidity differences (in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 0.5 K Temperature deviation in space ± 0.5 to ± 1.5 (corresponds to temperature gradient) 1 to 3 Humidity fluctuation over time in the center of the usable space ± 3 to ± 5 %RH Data for operation: Test room lighting Halogen bulb 12V, 20W Nominal voltage 1/N / PE AC 230 V ± 10 % 50 Hz Rated power 2.5 kW Rated current 11 A On-site fuse 16A slow-blow Heat dissipation air-cooled test chambers Max. Heat dissipation to surroundings 1700 W Refrigerant: R-452A / R23 Weight: 140 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2014, condition: good (used), Machine in operational condition with following specification: Dual-stage 2 x HM Head 2 x ScanCamera 2 x MultiCamera 2 x Nozzle Station 4 x FES32 Traceability package Lredpfxovfpmle Adtog Ask for additional information!

Condition: excellent (used), Year of construction: 2018, Extremely fast and precise inspection for high-volume production Z resolution 0.5 µm Z range Up to 30 mm (1.2") Angled view cameras Number of megapixel cameras 8 Orthogonal camera Resolution 10 µm Field of view 50mm x 50mm (2" x 2") Inspection speed Up to 65 cm2/s Software User interface Viscom vVision/EasyPro SPC Viscom SPC (statistical process control), open interface (optional) Verification station Viscom vVerify/HARAN Remote diagnosis Viscom SRC (software remote control) (optional) Programming station Viscom PST34 (optional) System computer Operating system Windows® Processor Intel® Core™ i7 PCB handling PCB dimensions 508 mm x 508 mm (20" x 20") Transport height 850 - 950 mm ± 20 mm (33.5" - 37.4" ± 0.8") Width adjustment Automatic Transport type Single track transport PCB clamping Pneumatic Upper transport clearance 50 mm (2") Lower transport clearance 45 mm (1.8"), up to 85 mm (3.3") optional; Lsdpfxowkfuue Adtjrg 40mm (1.6") with PCB support Other system data Positioning/handling unit Synchronous linear motors Interfaces SMEMA Power requirements 400 V (other voltages on request), 3P/N/PE, 8 A, 4 - 6 bar working pressure System dimensions 994 mm x 1565 mm x 1349 mm (39.1" x 61.6" x 53.1") (W x H x D) Weight 720 kg (1587 lbs

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Lrjdpen Htktsfx Adteg

Year of construction: 2016, condition: used, MYCRONIC MY600JP Solder paste jet printer Year of construction 2016 Lrjdpot E Sraofx Adtsg JPSys version: 2.6.3.0

Year of construction: 2012, operating hours: 63,311 h, condition: used, functionality: fully functional, machine/vehicle number: Y27639, Fitter fully functional Lrjdpfx Adeudk A Hetog

Condition: excellent (used), Model: UR5 Year of production: 2012/2013/2014 Weight: 18.4 kg Maximum payload: 5 kg Lrjdpfx Adswu Dr Toteg Reach: 850 mm Quantity: 4 units

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, Model NPS510E Fully automatic in-line stencil printer with 2D paste inspection - Max. PCB size: 510x450mm - Max. stencil size: 736x736mm - Cycle time (without printing): 8 seconds - Alignment repeatability: 12.5µm at 3 Sigma - Squeegee pressure: 4-30kgf - User interface: Windows - Dimensions: WxDxH 1.20 x 1.40 x 1.50m; 900kg Included: - Stencil cleaning system, wet/dry/vacuum - CCD camera for 2D inspection of paste print and stencil - Automatic conveyor belt width adjustment Lsdpfxjvuprme Adterg - Support block - Support pins - 2 metal squeegees

Year of construction: 2010, condition: ready for operation (used), Offered are 2 fully automatic stand-alone stencil printers for SMD assembly technology, PCB assembly year 2010. Fully automatic vision system, Linux-based operating software, double loading system, motorized table drive, large printing area X/Y 440mm/440mm, frame size X/Y max. 670mm/700mm, PCB thickness max. 6mm, cycle time approx. 18-25 sec., product changeover time < 5 min., squeegee pressure 4-24kg programmable, snap-off/separation speed programmable, compressed air supply 6bar approx. 60l/min., dimensions X/Y/Z 2080mm/1130mm/1450mm, signal tower 2000mm, weight approx. 285kg. Inspection possible by appointment. Lrsdpsxzt Dpsfx Adtjg

Year of construction: 2014, condition: good (used), EKRA Stencil Printer Serio 4000 Year of manufacture: 2014 Print format: min. 80x50 mm, max. 510x510 mm Substrate thickness: 0.2 to 6 mm Stencil size: min. 450x450 mm, max. 800x900 mm Repeat accuracy: +/-12.5 µm IQUESS steel squeegee 2 1/2 D inspection Ljdpfx Aoxxk Eljdtorg Adjustable transport width iPAG jet dispenser (with heating) Solder paste dispenser for cup diameter 53 mm, 57 mm, and 64 mm Paste level control EKRA Material Storage System S10 Select Year of manufacture: 2018 Consumables such as solder paste and adhesives can be stored according to product requirements and production options Traceability Temperature control (4-12°C) 8 shelves Material dispensing via lift system Handheld scanner