Rough terrain forklift truck

Manitou M 30.4

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,100 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 150 mm, fuel type: diesel, mast type: triplex, construction height: 3,055 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 5,600 kg, total length: 3,490 mm, drive type: Diesel, construction width: 1,920 mm, Rough terrain forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Fodpfx Aisym Enrevopn Front tire condition: 60 - 80% Rear tire type: Pneumatic Rear tire condition: 60 - 80% 3rd valve, 4th valve,

Condition: used, Year of construction: 1999, Equipment: all wheel drive, FAUN RTF 40-3 very good condition repainted in 2021 currently in use with us Trade-in possible under certain conditions / LFBK / Brillen Fzg. / AWU Fedswpn Sajpfx Aivopn APU / VSN / eligible for GDV listing New general inspection (HU) New UVV inspection

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 2,950 h, load capacity: 3,000 kg, lifting height: 4,500 mm, free lift: 1,545 mm, fuel type: diesel, mast type: triplex, construction height: 2,601 mm, power: 61 kW (82.94 HP), fork length: 1,200 mm, empty load weight: 6,280 kg, total length: 3,635 mm, drive type: Diesel, construction width: 2,105 mm, Rough-terrain forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Fedpfx Aisz Iulljvepn Technical condition: normal Front tire type: Pneumatic Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 80 - 100% Side shifter, 3rd valve.

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,097 h, load capacity: 3,000 kg, lifting height: 3,050 mm, fuel type: diesel, mast type: triplex, power: 55 kW (74.78 HP), Equipment: lighting, trailer coupling, Manitou M30-4 diesel all-wheel drive forklift with triplex mast and side shifter! Forklift 1: Year of manufacture: 2015 According to the meter: 4,097 hours Fedpez Irzwjfx Aivjpn Forklift 2: Year of manufacture: 2017 According to the meter: 8,032 hours Both forklifts are identical! 3-ton lifting capacity 3.05-meter overall height 5.50-meter lifting height 55 kW Perkins engine Torque converter with 4 gears each All-wheel drive Cab with heating and lighting system Immediately ready for use Original paint Includes road approval for the Netherlands Selling price: €19,900 net per unit! Affordable delivery also possible!

Condition: excellent (used), fuel type: diesel, color: yellow, Year of construction: 2001, operating hours: 8,535 h, General information Year of manufacture: 2001 Model year: 2001 Serial number: ADC01183 Technical information Fodpfsztpvxox Aivepn Number of cylinders: 6 Empty weight: 20.600 kg Functional Working width: 280 cm Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Other information Track width: 280 cm

Condition: good (used), Year of construction: 2019, operating hours: 2,700 h, lifting height: 5,500 mm, free lift: 150 mm, fuel type: diesel, mast type: triplex, power: 55 kW (74.78 HP), motor manufacturer: Diesel, fork length: 1,200 mm, Weights Empty weight: 6.100 kg Fsdpez Hih Ssfx Aivepn Functional Lifting capacity: 3.000 kg Maximum passing height: 290 cm CE mark: yes Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 30 Rear tyres remaining : 30 Tyre brand: Alianz Fork carriage: Sideshifter Latest inspection: 2026-07-01 Production country: IT Additional information Please contact Martyn Joosse for more information = Additional options and accessories = - Pneumatic tyres

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 1,650 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 150 mm, fuel type: diesel, mast type: triplex, construction height: 3,055 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 5,600 kg, total length: 3,490 mm, drive type: Diesel, construction width: 1,920 mm, Rough-terrain forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Fpodsw Uamxjpfx Aivon Technical condition: very good Front tires type: pneumatic Front tires condition: 80 - 100% Rear tires type: pneumatic Rear tires condition: 80 - 100% Side shift, 3rd valve,

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,274 h, load capacity: 8,000 kg, lifting height: 26,600 mm, fuel type: diesel, construction height: 3,120 mm, empty load weight: 22,500 kg, total length: 8,250 mm, drive type: Diesel, arm reach: 23,100 mm, construction width: 2,530 mm, Rotating telescopic handler Speed class: 40 Technical condition: very good Fodpevgi A Nofx Aivspn Description: Our equipment is regularly serviced and inspected. We offer rental, sales, service, and repair – you can get everything you need from a single source. We also offer lease-purchase options, financing, and the purchase of used machines. Our team will be happy to provide you with competent and personal advice. Just call us or send us a message via SMS or WhatsApp. The Magni RTH 8.27 is a powerful rotating telescopic loader for assembly, lifting, and material handling on construction sites and in industrial applications. With a lifting height of up to 26.6 m, a lifting capacity of 8,000 kg, an endlessly rotating upper carriage, and all-wheel drive, the machine is ideal for heavy loads, working at heights, and operating on difficult terrain. High reach and off-road capability. Robust, powerful, and easy to operate. You can find more information and submit a non-binding inquiry on our website – Safe working at any height.

Condition: used, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,535 mm, total length: 4,800 mm, All-terrain forklift Manitou M 30-4 Drive Diesel Fjdpfx Asztgahsivspn Year built 2025 Lifting height (mm) 5,535 Lifting weight (kg) 3,000

Condition: used, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,020 mm, total length: 4,640 mm, · Bedienertyp Sitzen · Lastschwerpunkt 500 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 747 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 7490 kg / 1475 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 2155 kg / 3810 kg · Vorderspur 1520 mm Fodpsyb Tqqsfx Aivspn · Abstand zwischen den Hinterrädern 1630 mm · Sitzhöhe 1426 mm · Gabelträger DIN 15173 A/B 3A · Gangbreite für Palette 1000 x 1200 quer 6180 mm · Gangbreite für Palette 800 x 1200 längs 6180 mm · Wenderadius 4030 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.60 m/s / 0.60 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Zugkraft / Zugkraft (unbeladen) 6290 daN / 4250 daN · Festellbremse Haudraulik · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Motorleistung gemäß ISO 1585 65 kW · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 185 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053 78 dB

Condition: good (used), Year of construction: 2014, Vehicle description Mobile excavator TAKEUCHI TB295W Year of manufacture 2014 according to counter 9,709 hours Fsdpjv D Dqvefx Aivepn 10,700 KG 77 KW - POWERTILT - hydraulic quick coupler - all lines - slope bucket - 2 buckets - blade - claws - central lubrication - air conditioning - reversing camera and and and... Nice and good original condition with original paint! Sale price: 49,950.00 net Cheap delivery also possible!

Condition: used, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,020 mm, total length: 4,800 mm, · Bedienertyp Sitzen · Lastschwerpunkt 500 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 747 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 7490 kg / 1475 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 2155 kg / 3810 kg · Vorderspur 1520 mm · Abstand zwischen den Hinterrädern 1630 mm · Sitzhöhe 1426 mm · Gabelträger DIN 15173 A/B 3A Fedpfjztgmbjx Aivepn · Gangbreite für Palette 1000 x 1200 quer 6180 mm · Gangbreite für Palette 800 x 1200 längs 6180 mm · Wenderadius 4030 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.60 m/s / 0.60 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Zugkraft / Zugkraft (unbeladen) 6290 daN / 4250 daN · Festellbremse Haudraulik · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Motorleistung gemäß ISO 1585 65 kW · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 185 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053 78 dB

Condition: used, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,600 mm, total length: 4,800 mm, All-terrain forklift Manitou M 30-4 Drive Diesel Year built 2025 Lifting height (mm) 5,600 Lifting weight (kg) 3,000 Fpodpfxjza H Ruj Aivjn

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system Fpsdpfst Ac Efsx Aivjn - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: used, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,550 mm, total length: 4,800 mm, All-terrain forklift Fpedpfeztgabsx Aivsn Manitou M 30-4 Drive Diesel Year built 2025 Lifting height (mm) 5,550 Lifting weight (kg) 3,000