Used Zeiss Cnc Coordinate Measuring Machine for sale (67,646)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, Zeiss CNC coordinate measuring machine Prismo Mass Navigator VAST GOLD Year of manufacture: 2021 Todpfx Acjzr I R Ej Tob Last calibration: 02/2025 Measuring range: X = 1200 mm, Y = 1800 mm, Z = 1000 mm In technically and visually like-new condition The machine was located in an air-conditioned precision measuring room Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor system 9-position probe changer magazine Reference probe Temperature probe Probe changer turret, 7 positions Calibration sphere HP Z4 workstation with monitor Calypso Basic 2022 software Options: Navigator, Curve, QDAS Converter, and PiWeb Reporting Further accessories and options available Available for immediate delivery

Condition: used, 3-D coordinate measuring machine ZEISS NUMEREX - non-functional Granite measuring table, granite measuring plate, measuring table Model No. 3648-18, Serial No. X-1019, Year of manufacture approx. 1986 Measuring range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring plate L x W 1525 x 1435 mm Usable area 1525 x 1100 mm Measuring plate thickness 305 mm Passage width in the portal 1100 mm Tedpfx Asfy U Ewjc Tjb Measuring probe mount Ø 9.5 mm Compressed air connection 6 bar Mains connection 230 Volt, 50 Hz - Granite plate with steel inserts with internal thread - Axis adjustment with pneumatic sliding guide for X, Y and Z axis - Plate on substructure with 5 adjustable feet, 3 support plates for the adjustable feet - Computer and software missing (not included and not part of the scope of delivery) → non-functional! Space requirement of the measuring machine L x W x H 1600 x 1850 x 2200 mm Weight of the machine approx. 2.8 tons Plate damaged on one side, see picture, otherwise in good condition.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 200412480282, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, table width: 1,000 mm, table length: 1,600 mm, year of last overhaul: 2025, Equipment: type plate available, Coordinate measuring machine Zeiss SPECTRUM 10/16/6, year of manufacture 2004, calibrated until 2025, less than 1,000 operating hours since control replacement in 2018. Condition: good, relatively little use, minor transport damage to the granite table (not functionally relevant). Year of manufacture: 2004 (date of manufacture 12/2004) Tsdpfx Acezxgmxe Teb Location: West Saxony Price: on request Technical data: Manufacturer: Carl Zeiss IMT GmbH / Carl Zeiss Inc. IMT Corporation Model: SPECTRUM 10/16/6, U-STONE (granite measuring table) Part No.: 623266.9803.013 Serial No.: 200412480282 Measuring range: X 1,000 mm × Y 1,600 mm × Z 600 mm Measuring software: Zeiss Calypso, Version 6.2.12 Control: replaced in 2018 Probe head: swiveling probe system with extensions/probe holders (see photos) Design: gantry measuring machine, CNC drives Condition/Use: Operating hours since control replacement in 2018: less than 1,000 hours – very little use. Calibration performed in 2025. The granite measuring table has minor, purely optical transport damage (see photos), which is not functionally relevant. Description: For sale is a Zeiss SPECTRUM 10/16/6 coordinate measuring machine with a granite measuring table (U-STONE), year of manufacture 2004. The gantry measuring machine has a measuring range of 1,000 × 1,600 × 600 mm, a swiveling probe system with extensions, and is operated with the Zeiss Calypso measuring software (Version 6.2.12). The control system was completely replaced in 2018 – since then, less than 1,000 operating hours have been logged. The machine is in good technical condition and was calibrated in 2025. The granite table has minor, purely cosmetic transport damage that does not affect its function. Inspection and functional testing at the location in West Saxony are possible by appointment. Price: please request a quote.

Condition: like new (used), Year of construction: 2015, operating hours: 230 h, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 20 kg, total height: 890 mm, total width: 986 mm, total length: 705 mm, overall weight: 170 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, SPECIAL OFFER with optional full service (delivery, commissioning) Technical data of the HEXAGON OPTIV CLASSIC 321 GL tp measuring machine Year of manufacture: 2015 Maximum traverse speed in X, Y, Z axes: 160 mm/s Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Measuring accuracy in X, Y axes (optical sensor): Ex, Ey = (1.6 + L/250) µm Measuring accuracy in XY axes (optical sensor): Exy = (2.0 + L/250) µm Measuring accuracy in Z axis (optical sensor): Exy = (3.9 + L/200) µm Measuring accuracy in X, Y axes (touch-trigger probe): Ex, Ey = (2.0 + L/250) µm Measuring accuracy in XY axes (touch-trigger probe): Exy = (2.5 + L/250) µm Measuring accuracy in Z axis (touch-trigger probe): Ez = (2.9 + L/200) µm Measuring volume (optical sensor): X 300 mm / Y 200 mm / Z 150 mm Measuring volume (tactile sensor): X 230 mm / Y 200 mm / Z 150 mm Dimensions (L x W x H): 705 x 986 x 890 mm Machine weight: 170 kg Equipment of the measuring machine: Tsdpfxoxfzzqo Ac Tob • 3-axis microprocessor CNC with vector path control • Metrology software: PC-DMIS Vision • Vision sensor for non-contact measurement of the smallest and most precise components • CCD camera with 6.5x motorized CNC zoom • DC servomotors • TESA probe system (1 body and 1 module) • Modular probe changer: TESASTAR with 4 slots and 4 modules • Linear guides on all axes • Coaxial LED top light (white LED) • LED backlight (green LED + diffuser) • Multi-segment LED ring light • Evaluation computer from Dell included Optional services: Delivery (surcharge) Commissioning (surcharge)

Condition: ready for operation (used), Year of construction: 1998, functionality: unexamined, CNC control for Wenzel Type WPC2000 including control cabinet and handheld unit Todpfx Aov Irygoc Tsb

Condition: excellent (used), machine/vehicle number: 94681, ZEISS PRISMO 5 3D coordinate measuring machine with VAST probing system For sale is a used ZEISS PRISMO 5 3D coordinate measuring machine, serial number 94681. The machine is equipped with a ZEISS-VAST probing system and a comprehensive multi-probe changer. A machine-side ZEISS control console is also included. Additionally available is a cabinet with probes, which is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe inventory can be provided upon request. Machine data Manufacturer: ZEISS Model: PRISMO 5 Serial number: 94681 Probing system: ZEISS VAST Equipment: Multi-probe changer Condition: used ZEISS service and inspection marking The machine has a marking from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to an inspection according to DIN EN ISO 10360. Documented specifications: MPE(E0): 2.70 + L/250 P: 2.00 RONt: 4.40 Type: PRISMO 5 Serial number: 94681 Tedpfx Acezwvk Ro Teb Calibration date: 02/2025 The values stated are reproduced according to the ZEISS marking on the machine. ZEISS CALYPSO 5.8 is visible on the existing control PC. The exact scope of the license or the transferability of an existing software license is not part of this information and can be checked separately if desired. Optionally available In addition, there is the possibility of purchasing a separate cabinet with a comprehensive inventory of ZEISS probes and accessories. This cabinet is not included in the machine price and can be offered separately if desired. Condition and inspection The machine is in used condition. An inspection is possible after prior arrangement. The exact scope of delivery can be agreed upon or checked based on the available components if there is concrete interest. Errors, changes and prior sale are subject to change. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC coordinate measuring machine Prismo 9/15/7 VAST GOLD Year of manufacture: 2000 Retrofit 2024, last DAkkS calibration 12/2021 Measuring range: X = 900 mm, Y = 1500 mm, Z = 700 mm Tjdpfxjzq U Rcs Ac Tjb In excellent technical and optical condition Device features, equipment: C99 control system with BP26 operating panel Automatic temperature compensation VAST GOLD sensor system Probe changer magazine MSR, 10-position VAST Probe changer plate, 8x VAST Reference probe Temperature probe Probe accessories Calibration sphere HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software Options: Curve and QS-Stat Calypso upgrade and other options possible Further accessories and options available Available for immediate delivery

Condition: ready for operation (used), Year of construction: 2020, An optical CNC 3D coordinate measuring machine Keyence is available. Display resolution: 0.1µm, repeatability: 2µm, measurement accuracy: +/-10µm, low magnification: 300mm/200mm, high magnification: 70mm/50mm, max. load capacity: 20kg, weight: approx. 30kg. Documentation available. An on-site inspection is possible. Tjdpfx Acey Hk Tbe Teb

Condition: ready for operation (used), Year of construction: 2008, A CNC-controlled 3D multisensor coordinate measuring machine by Dr. Schneider is available. Design: bridge type, measuring dimensions X/Y/Z: 400mm/400mm/300mm, axis resolution: 0.0001mm, max. traverse speed: 100mm/s, max. acceleration: 4m/s², optical length measurement error: 2+L/300µm, volumetric length measurement error: 2.8+L/300µm, probe head: Renishaw PH10M, touch probe: Renishaw TP200, probe interface: Renishaw PI200. Machine dimensions X/Y/Z: approx. 1200mm/1200mm/2100mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Tedpfjzli Tuex Ac Tsb

Condition: ready for operation (used), Year of construction: 2023, A Mitutoyo CNC bridge coordinate measuring machine is available. Travel X/Y/Z: 1200mm/2000mm/1000mm, measuring volume: 2.4m³, max. workpiece weight: 2500kg, max. workpiece height: 1000mm, probe system: Renishaw, probe positions: 20, measuring accuracy: 2.3+/-0.3/100µm, max. travel speed: 693mm/s. Machine dimensions X/Y/Z: approx. 3400mm/2200mm/3600mm, weight: approx. 6150kg, control: Mcosmos-3 V4.3. Documentation available. An on-site inspection is possible. Tedpfxozhnrbs Ac Teb

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 111288, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 1,200 kg, total height: 2,930 mm, type of input current: AC, total width: 1,525 mm, total length: 1,740 mm, overall weight: 3,500 kg, table width: 925 mm, table height: 720 mm, table length: 1,195 mm, table load: 1,200 kg, compressed air connection: 6 bar, ambient temperature (max.): 35 °C, ambient temperature (min.): 10 °C, Equipment: type plate available, # Advertisement Description – ZEISS MPS PRISMO 7/9/5 For sale is a used ZEISS MPS PRISMO 7/9/5 3D coordinate measuring machine. The machine was manufactured in 2000 and has the serial number 111288. It is equipped with a ZEISS VAST probing system and a multi-probe changer. # Technical Data * Manufacturer: ZEISS * Model: MPS PRISMO 7/9/5 * Series: PRISMO * Year of Manufacture: 2000 * Serial Number: 111288 * Measuring Range X-axis: 700 mm * Measuring Range Y-axis: 900 mm * Measuring Range Z-axis: 500 mm * Probing System: ZEISS VAST * Multi-probe changer included * Machine-mounted operator console included * Condition: used # Optional In addition to the machine, it is possible to purchase a separate cabinet with an extensive collection of ZEISS probes and accessories. The cabinet is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe collection can be provided upon request. # ZEISS Service and Test Label The machine has a label from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to a test performed according to DIN EN ISO 10360. Tedpfx Acezwu Alj Tob The following values are indicated on the label: * MPE(E0): 1.40 + L/350 * P: 1.20 * THP: 1.40 * TAU: 29.00 * Type: PRISMO * Serial Number: 111288 * Label: 2025-10 The stated values are reproduced according to the ZEISS label on the machine. # Condition and Inspection The machine is in used condition. An inspection is possible by prior arrangement. Subject to errors, changes, and prior sale. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, 3D Coordinate Measuring Machine | Brand: MAUSER/ZEISS | Type: KMZ-G 602520 | Year of manufacture: 1988/2003 Optionally available with an air-conditioned hall. The machine has been calibrated regularly by ZEISS. The last calibration was performed on August 7, 2025, the next calibration (recommended) is scheduled for August 2026. TECHNICAL SPECIFICATIONS:: Measuring ranges (Length x Width x Height): 6.000 x 2.500 x 2.000 mm Travels: - X-axis: 6.000 mm - Y-axis: 2.500 mm - Z-axis: 2.000 mm - Length measurement uncertainty according to VDI/VDE 2617: U3 = (5,0 + L/250)µm, V2 = 3,5 µm - Length measurement uncertainty according to ISO 10360-2: MPE_E = (5,0 + L/250)µm - Environmental conditions for maintaining the specified accuracy: * Temperature range: 21°C +/- 3°K * Temperature fluctuation: 0,5°K/h, 1,0°K/d, 0,5°K/m - Environmental conditions for operation: * Temperature range: + 15°C up to 35°C * Humidity: 30 up to 70% General features, Equipment: - Portal measuring machine with ultra-precision guides and ball-screw drives - Second Y-axis with granite guideway and air bearing - High-resolution Zeiss scales - Positive-drive mechanisms in all three axes - Collision protection for the quill and probe head (for VAST-TK) for manual and setup modes - Safety position for crane interlock - Reference temperature compensation - Microcomputer control - Practice piece: cube, star-shaped stylus - Reference probe D = 8 mm, length: 115 mm Tsdpfx Acjy Iub So Tjb - Reference standard D = 30 mm - includes basic software package - Load-bearing capacity: Limited only by the foundation design - Measuring system: VAST - Software: Zeiss CALYPSO - Documentation Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: ready for operation (used), Year of construction: 2023, A Keyence optical 3D coordinate measuring machine with a 360° 3D scan is available. Measuring accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/composite: 200mm/500mm, rotation range: 360°, tilt range: 45°, max. table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation available. On-site inspection is possible. Tsdpfxjwx Rcye Ac Tsb

Condition: ready for operation (used), Year of construction: 1996, Measuring range X/Y/Z: 700mm/700mm/500mm, probe ball diameter: 7.9942mm, control: Zeiss C90, touch probe: PH6/TP6, max. measuring deviation: 3.6+L/250µm, max. angle error: 0.22°, weight: approx. 1500kg. Documentation available. On-site inspection is possible. Tjdpewzldwsfx Ac Teb

Condition: ready for operation (used), Year of construction: 2023, An optical 3D coordinate measuring machine Keyence is available. Measurement accuracy: +/-10µm, repeatability: +/-2µm, measurement points: 9 million, max. measurement diameter: 300mm, max. measurement height: 200mm, max. measurement dimensions (multiple capture) X/Y/Z: 580mm/300mm/200mm, max. workpiece weight: 50kg, table tilt: 45°. Including control and evaluation software, rotary table and calibration accessories. Documentation available. An on-site inspection is possible. The image is an example. Tsdjzhnuvepfx Ac Tob

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC coordinate measuring machine Prismo VAST GOLD Year of manufacture: 2001 Retrofit in 2024 and 2026, last calibration 11/2023 Measuring range: X = 900 mm, Y = 1800 mm, Z = 700 mm In excellent technical and optical condition. Device features, equipment: C99 control system with control panel Automatic temperature compensation VAST GOLD sensor Probe changer magazine, 17-position Probe changer, 20 positions Probe accessories Calibration sphere Reference probe Todezkhzhopfx Ac Tsb HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software QS-Stat option Calypso upgrade and other options available Further accessories and options possible Available on short notice

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, type of input current: AC, input voltage: 230 V, Equipment: documentation/manual, Keyence XM-C1000 Portable Coordinate Measuring Machine / Measurement System Manufacturer: Keyence Model: XM-C1000 Condition: Used, fully functional For sale is a used Keyence XM-C1000 measurement system for precise 3D coordinate measurement of components and assemblies. The system enables fast and reproducible measurements without complex programming and is ideal for quality assurance, incoming goods inspection, first article inspection, and production monitoring. Tsdpoztzm Nsfx Ac Tsb The XM-C1000 impresses with its ease of use, high measurement accuracy, and flexible application possibilities. Measurements of distances, diameters, positions, angles, and geometric tolerances can be performed and documented efficiently. Technical features: Portable optical coordinate measuring system Precise 3D measurements Intuitive user interface Fast inspection processes Automatic measurement reports Ideal for production and quality assurance Condition: Used Fully functional Good optical condition Normal signs of wear and tear Inspection and functional testing possible by appointment Scope of delivery: Keyence XM-C1000 measurement system Existing accessories as shown in the picture Documentation

Condition: used, For sale is a high-quality 3D CNC coordinate measuring machine from the renowned manufacturer Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This device stands out for its precision, reliability, and versatility in industrial metrology. Features & Equipment: - CNC-controlled 3D coordinate measuring machine - Multi-sensor capable (optical and tactile measurements possible) - Moving-bridge design (MB/Z) for high stability and flexibility - High precision measurement of complex workpieces - Robust construction, designed for continuous industrial use - Suitable for quality control, production monitoring, and R&D applications Additional Equipment – Renishaw TP200 Probe System: The high-precision, touch-trigger Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It allows for quick probe change-outs and precise measurements even with long probe styli. Key Features: - Strain gauge technology: Minimizes deflections are registered with high accuracy; typical errors such as “lobing” are avoided - High precision: Repeatability up to 0.4 μm, 2D probing uncertainty ±0.8 μm - Fast changeover: Automatic probe change with SCR200 rack, no recalibration required - Durability: Probe module lifetime exceeds 10 million triggerings - Flexibility: Standard- (SF) and low-force (LF) modules for sensitive materials - Compatibility: Usable with Renishaw PH10 probe heads and extensions up to 300 mm Technical Specifications (excerpt): - Connection: M8 connector, PI200 interface Tedpszii Dzefx Ac Tjb - Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) - Probing force XY: 0.02 N, Z: 0.07 N - Overtravel force XY: up to 0.4 N, Z: up to 4.9 N - Weight (sensor + module): 22 g - Stylus threads: M2 Technical Data: - Manufacturer: Werth Messtechnik - Model: Scope-Check 650×750×500/MB/Z - Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm - Supply voltage: 115–230 V AC - Power consumption: max. 10 A Scope of Supply: - Werth Scope-Check 650×750×500/MB/Z - Renishaw TP200 probe system including probe modules - Accessories as shown in the attached images Important note: "The table shown in the photos is not included in the sale." (Specifications and technical details subject to change and errors!) We are happy to answer further questions by phone.

Condition: excellent (used), Year of construction: 2018, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 100 kg, The system was hardly used (the order was cancelled). CMM DuraMax 5/5/5 ZEISS CNC coordinate measuring machine (CMM) with cantilever design. Maximum permissible length measuring deviation (MPE) according to ISO 10360-2:2009: - MPE_E0 (3D) = (2.4 + L/300) µm for 18 - 22 °C - MPE_E0 (3D) = (2.7 + L/250) µm for 18 - 26 °C - MPE_E0 (3D) = (2.9 + L/200) µm for 18 - 30 °C Maximum permissible scanning probe deviation (MPE) according to ISO 10360-4:2000 within the maximum permissible scanning test duration (MPT). MPE_THP = 2.9 µm within MPT_tau = 55 s. Single probe deviation form according to ISO 10360-5:2010. Tedpszb U Hasfx Ac Teb MPE_PFTU = 2.4 µm. Form measuring deviation according to ISO 12181:2011 (VDI/VDE 2617 Part 2.2). MPE_RONt (MZCI) = 2.4 µm.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC Coordinate Measuring Machine Prismo 9/15/7 MASS VAST GOLD - RDS+VAST XXT Year of manufacture: 2004 Retrofit 2024, last calibration 01/2025 Measuring range: X = 900 mm, Y = 1500 mm, Z = 700 mm In excellent technical and optical condition. Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor system Tsdpfxszk Id Aj Ac Tjb RDS sensor system with VAST XXT Probe changer magazine MSR 10-position VAST Gold Probe changer magazine 3-position VAST XXT Probe changer plate 8x VAST Gold Probe changer plate 3x VAST XXT Reference probe Temperature probe Probe accessories Calibration sphere HP Z4 workstation WIN11 with monitor Calypso Basic 2024 software Curve and QS-Stat options Calypso upgrade and other options possible Further accessories and options possible Available for short-term delivery.

Condition: ready for operation (used), Year of construction: 2012, A Mitutoyo coordinate measuring machine overhauled in 2023 is available. Measuring dimensions X/Y/Z: 705mm/1005mm/605mm, max. workpiece height: 800mm, table dimensions X/Y: 880mm/1720mm, max. table load: 1000kg, resolution: 0.1µm, traverse speed: 520mm/s, measuring speed: 8mm/s. Machine dimensions X/Y/Z: approx. 1500mm/2000mm/2750mm, weight: approx. 2000kg, control: GEOPAK and CAT 1000 PS. Including various probe trees. Documentation available. On-site inspection is possible. Todpfx Acox Ih A Nj Teb

Condition: ready for operation (used), Year of construction: 2023, A CNC 3D coordinate measuring machine Keyence is available. Table diameter: 500mm, measuring diameter: 500mm, measuring height: 200mm, travel X/Y: 280mm, rotation capability: 360°, tilt angle: 45°, max. table load: 50kg, display resolution: 0.1µm, repeatability: 2µm, measuring accuracy: +/-10µm. Machine dimensions X/Y/Z: approx. 720mm/1000mm/860mm, weight: approx. 30kg. Documentation available. An on-site inspection is possible. Tsdpfoympc Hjx Ac Tjb

Condition: ready for operation (used), Zeiss MC 850 3D coordinate measuring machine Measuring range x: approx. 800-850mm Measuring range y: approx. 1200mm Measuring range z: approx. 600mm New software 2025 Accessories: Computer Changer Probe You are welcome to visit us for a viewing. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers as well. Todpfx Aceznkulj Tob The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 201502530269, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, table load: 560 kg, Equipment: documentation/manual, type plate available, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of Manufacture: 2015 | Commissioned: 2016 | Immaculate Condition | Extremely Low Operating Hours We are offering for sale a ZEISS Contura G2 coordinate measuring machine (CMM) with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT TL1 scanning probe head. The device comes from a controlled laboratory environment and was used exclusively on-demand, single-shift operation, never on a production line – resulting in exceptionally low actual usage and outstanding technical condition. 🔹 Basic Information Manufacturer: ZEISS Model: Contura G2 Measuring Range (X/Y/Z): 700 / 700 / 600 mm Year of Manufacture: 2015 Commissioned: 2016 Technical and Visual Condition: Perfect Measurement Error MPE (E0) = 1.7+L / 350 μm 🔹 Configuration and Accessories ✅ ZEISS VAST XXT TL1 active scanning probe head ✅ Stylus rack / magazine ✅ Set of measuring styli (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Reference sphere ✅ BP26_SE control console 🔹 Usage History Device used exclusively in laboratory conditions Occasional, project-based (on-demand) use Single-shift operation, no serial or production work As a result, the machine exhibits extremely minimal mechanical wear 🔹 Service and Calibration ✅ Service and calibration exclusively by official ZEISS technicians Tsdpfx Aoyzmbdjc Teb ✅ Regular maintenance according to manufacturer guidelines ✅ No third-party interventions ✅ Device fully operational 🔹 Status 📍 Machine available immediately 🔍 Viewing possible 📄 Full documentation included ✅ Buyer arranges transport

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Todpfszii Dhox Ac Tsb Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.