Used Wurster & Dietz Gdz 600 Ges for sale (11,527)

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades Hsdpfx Aeqpdi Uod Rjn with templates with fence immediately available Location: Austria, near Klagenfurt

Condition: excellent (used), Original spacer rings 145 Ø x 86 Ø with 1 groove 16.5 mm in various widths, 1 used saw shaft 60 mm Ø with 2 wedges 16 mm wide including 1 sliding bush 120 mm effective clamping length with left-hand threaded clamping nut suitable for right-hand machine and bearing bush for front flap Hedpfx Adewaiaao Rjn

Condition: excellent (used), 2 complete sets of white metal main bearings, each set consisting of 4 bearing shells, bearing inner Ø = main shaft Ø 140 mm, bearing outer Ø 200 mm or 220 mm, width of each shell 100 mm Hsdpfx Adjwv Rphj Rsn

Condition: good (used), WD creel type GXW 71, with spherical roller bearing in the main shaft. Suitable for all base plates of GXV and GXW creels. Hsdouql Ilopfx Ad Ron Fully hydraulic. With hydraulic saw tensioner. Ideal as a replacement sash gang or swing replacement.

Condition: excellent (used), functionality: fully functional, Wurster & Dietz roller conveyor with remover, roller width 2 m, with take-off table for boards, under-table crosscut saw with roller tables Hjdpjyx U E Sofx Ad Ron

Condition: ready for operation (used), Wurster & Dietz round timber intake station with singulator and block chain conveyor with ejector. Hodpfxjyxrtae Ad Ron

Condition: used, - used spiral roller conveyor - 2 pcs separating lamellas - 6,000 mm length Hjdpfxjw Ag Dze Ad Ron - 800 mm roller width - approx. 1,000 mm overall width - approx. 150 mm roller diameter - approx. 430 mm roller pitch - SEW feed gear motor

Condition: good (used), functionality: fully functional, Passage height 160 mm Passage width 800 mm Hedpfx Adewx Hrwe Ron Feed speed steplessly adjustable 0–70 m/min Hydraulic width adjustment with pneumatic cylinder, electrically adjustable, Drive motor Siemens 50 kW with V-belt drive, Wood infeed and outfeed table, The machine has been technically inspected and is in working condition.

Condition: ready for operation (used), functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Type FR7 with in-machine adjustment Hsdpfx Ajv I D Shsd Rjn Star-delta soft start Feed roller table Single-blade spiral roller chip separator Chips discharged into a trolley Main product on the feed roller table

Condition: used, Wursten & Dietz mechanical nailer. Hedpfxelvripe Ad Ren Prepared for nailing skates. The machine is sold as is.

Condition: good (used), Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 600 x 240 mm Hodpfxet Hy Ule Ad Ren -Volume flow: m³/h -Dimensions:790/700/H790mm -Weight: 97 kg

Condition: good (used), 2 pieces of frame stands. Oscillating shaft and overhung shaft. 2 pieces of split lower frame rollers. Hodpfxowwr Eaj Ad Ren Shafts and bearings for rollers. Guide bracket, etc.

Condition: used, 🧰 Product Features • Condition: Used item, see photos • Color: blue, red, yellow Hjdpfx Adswz I Tno Ron • External dimensions without pipes: 145 × 145 × 16 cm • Internal dimensions: 128 × 128 cm • Height incl. pipes: approx. 140 cm and 160 cm • Pipe length: approx. 130 cm and 150 cm • Pipe diameter: 35 mm • Load capacity: 500 kg • Stackable: Yes 💰 Price € 39,- net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Available immediately • Inspection and collection: possible at any time by appointment Over 5,000 linear meters of pallet racks from various manufacturers constantly in stock (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our Terms and Conditions, all prices excl. VAT ex warehouse.)

Condition: good (used), Year of construction: 2015, functionality: fully functional, pressing force: 2,500 t, table width: 2,500 mm, table length: 5,000 mm, total length: 8,000 mm, total width: 8,000 mm, total height: 9,000 mm, overall weight: 55,000 kg, Equipment: safety light barrier, LOIRE SAFE Hydraulic Press – High-Performance System for Toolmaking and Heavy-Duty Forming This high-performance hydraulic press in a robust 4-column gantry design has been specifically engineered for demanding applications in toolmaking (tryout/spotting) as well as for large-format forming processes. The stress-relieved, annealed welded construction ensures maximum rigidity and long-term process stability. The machine is equipped with three main cylinders featuring multi-cylinder parallel control, achieving high repeat accuracy within ±0.1 mm. Its powerful hydraulic system, based on Bosch Rexroth components, operates at a maximum working pressure of approximately 450 bar, enabling precise and forceful processing. Control is provided via a Siemens S7-317F PLC, combined with servo-controlled axes (Rexroth MLC) and visualization via Siemens WinCC. This setup allows for fully programmable press cycles, storage of tool parameters, and user-friendly operation with diagnostics and fault monitoring. Hodsyw Ah Espfx Ad Ren In terms of safety, the press is comprehensively equipped: light curtains at the front and rear (Category 4), ram parallelism monitoring, emergency stop with defined response time, and optional two-hand operation ensure maximum operational safety. The system is CE-compliant and meets current safety standards. Features include a hydraulic, three-section draw cushion, a hydraulic ram cushion, as well as a movable table with approximately 4,000 mm stroke. The machine is complemented by a DIN-standard ram plate and integrated cutting impact damping for challenging forming processes. Toolmaking (Tryout / Spotting)

Condition: new, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Hedpfxsh Euqlo Ad Ron Mr.: Simon Blank Included in delivery are: 01x workbench frame, new Material color: anthracite total width: approx. 1.400 mm total height: approx. 900 mm total depth: approx. 600 mm 01x Worktop, new total width: approx. 1.400 mm total depth: approx. 600 mm Notes: - The workbenches are commissioned unassembled General information about the item: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Included in the scope of delivery: 01x Stackable wire mesh frame, used Total weight: 27.23 kg Color: blue Total width: approx. 600 mm Total depth: approx. 800 mm Total height: approx. 950 mm Hedpfx Aew Rvtaed Ren Usable height: approx. 800 mm Opening size: approx. 550 x 520 mm (W x H) Mesh size: approx. 50 x 50 mm Wire thickness: approx. 3.00 mm Tube profile: approx. 22 mm Consisting of 2 foldable side panels! 01x One-way pallet, used Total width: approx. 600 mm Total depth: approx. 800 mm Height: approx. 150 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any requested transport or shipping of this item will incur additional costs, which can be quoted separately depending on the delivery location and scope.

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank The scope of delivery includes 01x crash barrier, used Total length: approx. 2,575 mm Clear width: approx. 2,400 mm Total height: approx. 600 mm Consisting of each: 02x frame profile, used Material color: blue Profile dimensions: approx. 100 x 79 x 3.0 mm Clear width: 2,300 mm 02x Post, second-hand Material color: hot-dip galvanized Hsdpfx Adshputho Rsn Total height: approx. 600 mm Incl. 2 welded-on screw-on plates: approx. 200 x 80 x 10 mm Square profile: 90 x 90 mm Weight / piece: approx. 15.00 kg Base plate: approx. 200 x 200 x 10 mm Hole diameter: approx. 15 mm General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) Assembly and installation Our general assembly conditions must be observed Shelf inspection Rack inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: new, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 01x workbench frame, new Material color: anthracite total width: approx. 1.750 mm total height: approx. 865 mm total depth: approx. 600 mm 01x Worktop, new total width: approx. 1.750 mm material thickness: approx. 35 mm total depth: approx. 600 mm Notes: - The workbenches are commissioned unassembled General Item Information: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Hedsh Euk Uspfx Ad Rsn Delivery with our own fleet (without unloading)

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss climate chamber water-cooled (test room explosion-proof) INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST ROOM Technical data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Test room capacity: approx. 600 liters Cold / heat operation -70 to 180°C Climate operation 10 – 95°C Humidity 10...98% r. H. Temperature change per time Cooling approx. 2.5 K/min Heating approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A On-site fuse: 32 A slow-blow Hjdev Ewy Hjpfx Ad Ron Permissible test item weight Total load of the grate supports 80 kg Test room floor 80 kg, grate insert 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (The air conditioning system's evaporator has been replaced) For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, 2x KWB Powerfire TDS 300 Wood Chip Boilers – approx. 600 kW For sale are two KWB Powerfire TDS 300 wood chip boilers, which were operated together in a cascade system. 👉 Total output: approx. 600 kW — Technical Highlights: • Rotary grate combustion system – robust, self-cleaning • Cyclone combustion chamber – clean combustion, low emissions • Lambda control – optimal efficiency • Fully automatic output modulation • Automatic heat exchanger cleaning • KWB Comfort 3 control system • Suitable for both wood chips and pellets Hjdpfx Adey A Ewtj Ren — Advantages of the Cascade System: • Flexible performance adjustment as required • Very efficient in partial load operation • Each boiler can be operated independently • Redundancy / operational reliability — Scope of Supply: ✔ Includes feed auger on both boilers (ca. 1 m screw conveyor with drive motor, mounted directly on the boiler – feeds fuel directly into the combustion chamber) ⚠️ Note: No discharge / conveying system (fuel extraction from store) → available on request at additional cost — 📍 Location: Mosonmagyaróvár, Hungary 👉 approx. 80 km from Vienna 👉 approx. 35 km from Parndorf TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a permanent stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city after the Austrian-Hungarian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heating units • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Fuel extraction systems • Burners • Pumps • A comprehensive range of heating accessories ⚙️ Accessories and Components: We also offer a broad range of accessories, including circulation pumps, plate heat exchangers, and many other components for private to industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment in stock that is not yet listed online. 📅 Inspection: Viewing at our warehouse is possible by appointment. If interested, please contact us – we look forward to helping you find the right solution.

Condition: used, Grasdorf VF600/65R38 Bridgston 164D/160 E TL NRO fits Fendt 314 Vario / S4 / Hedpot A Uhxjfx Ad Ron

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg Hedpfx Adong Ax So Rjn OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: good (used), Basic dimensions: Width: approx. 3,180 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted framework ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench frame 3,180 x 700 mm / 2 levels / (184.00€ incl. 19% VAT) Workbench frame 3,180 x 800 mm / 2 levels / (186.00€ incl. 19% VAT) Workbench frame 3,180 x 900 mm / 2 levels / (188.00€ incl. 19% VAT) Workbench frame 3,180 x 1,000 mm / 2 levels / (190.00€ incl. 19% VAT) Workbench frame 3,180 x 1,050 mm / 2 levels / (192.00€ incl. 19% VAT) Workbench frame 3,180 x 1,100 mm / 2 levels / (194.00€ incl. 19% VAT) Workbench frame 3,180 x 1,200 mm / 2 levels / (198.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Hedjth N Shspfx Ad Rsn General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for light-duty crossbeam: Racking system: SSI Schäfer Type: PR600 Included in delivery: 01x light-duty crossbeam, used Designation: BL 3 Total length: 1,310 mm Hsdpfx Adowwr Uuo Rjn Profile dimensions: L 42 x 44 mm Material colour: sendzimir galvanized Note: For use in PR 600 & WR 600 rack uprights in combination with R3000 shelves Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is offered for collection only. Should you require transport or shipping of this item, additional charges will apply, which can be requested from us depending on the delivery location or the scope of delivery.

Condition: good (used), Basic dimensions: Width: approx. 2,470 mm Height: approx. 900 mm Depth: approx. 600 mm Hjdpfx Adsth N Sls Ron Technical data for the workbench frame: Manufacturer: Polypal Type: Stockpal The scope of delivery includes: 02x workbench stand, used Material color: anthracite Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( screwed framework ) 04x Workbench traverse, used Material color: orange Box profile: 120 x 50 mm clear width: 2,300 mm 08x Locking pin, second-hand Version: sendzimir galvanized For securing the side rails against unintentional lifting out Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench frame 2,470 x 700 mm / 2 levels / (166.00€ incl. 19% VAT) Workbench frame 2,470 x 800 mm / 2 levels / (168.00€ incl. 19% VAT) Workbench frame 2,470 x 900 mm / 2 levels / (170.00€ incl. 19% VAT) Workbench frame 2,470 x 1,000 mm / 2 levels / (172.00€ incl. 19% VAT) Workbench frame 2,470 x 1,050 mm / 2 levels / (174.00€ incl. 19% VAT) Workbench frame 2,470 x 1,100 mm / 2 levels / (176.00€ incl. 19% VAT) Workbench frame 2,470 x 1,200 mm / 2 levels / (178.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.